Buy 3D printers, filament, parts & tools | lowest prices

Description Create the most colourful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500mm/s and a maximum acceleration of 12,000mm/s², allowing you to print in no time. With this combo you not only get the printer, but also a CFS, with which you can print up to 4 colours simultaneously.

Multi material system
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed levelling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralises vibrations, so you can quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has a full metal design that is cast from an aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors whether the filament is broken or empty. If there is still a spool of the same filament available in the CFS, it will automatically be switched to this.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	47.7 x 40.9 x 39.2 cm	Max print depth:	26 cm
Input voltage:	110-220V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	20.28
Printer bed levelling:	automatic	Max print width:	26 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00323
Has CNC option:	no	Variant:	With CFS
Filament sensor:	yes	Weight:	11.31 kg
Heated bed included:	yes

Order now, we can ship this today!

€369.00

€300.00 Excl. 23% VAT

In stock

Anycubic Kobra S1 Combo 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600mm/s, you can create the coolest projects in no time. In addition, this 3D printer has handy functions that make it even easier for you. With this combo you also immediately receive the Ace Pro multi-material system.

Ace Pro
The Ace Pro allows you to use up to 4 colours or materials in one print. This allows you to easily create colourful 3D prints or prints with multiple materials. By connecting multiple Ace Pro units, you can even increase this number to 8 colours or materials. This unit also actively dries the filament during 3D printing, giving you 3D prints of the best possible result.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320˚C full metal hotend, a 120˚C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic leveling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odors.

Other functionalities
The 4.3 inch touchscreen has an intuitive UI, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	490 x 400 x 410 mm	Max print depth:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Nozzle diameter:	0.4 mm	Max print volume:	15.625
Power rating:	1,500 W	Max print width:	25 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	320 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	yes	Our item no:	DKI00319
Has CNC option:	no	Variant:	With ACE Pro
Filament sensor:	yes	Weight:	15.5 kg
Heated bed included:	yes

Order now, we can ship this today!

€459.00

€373.17 Excl. 23% VAT

€599.00 Anycubic3D rrp

In stock

Creality 3D Ender-3 v3 SE 3D printer ⭐ Our choice for a budget plug & play printer

Creality 3D Ender-3 v3 SE 3D printer DKI00192

Zoom in

Description Open up a world of infinite creative possibilities with the Ender-3 V3 SE printer from Creality. Within 20 minutes you have assembled the printer and it is ready for use. With the easy auto bed-levelling system you can always start printing quickly. The CR Touch sensor easily levels the build plate and the tension sensor provides an automatic z-offset. The Ender-3 V3 SE is perfect for making all kinds of prints: from home accessories to gadgets, this printer can do it all and has a maximum print speed of 250mm per second.

The reliable 'Sprite' extruder of the Ender-3 V3 SE can handle many different materials, such as PLA, PETG and the flexible TPU. The filament is automatically loaded and unloaded for even more ease of use. With the 'extrude' function, the filament will flow smoothly from the nozzle. The 'retract' function will quickly retract the filament, after which you can remove and replace it effortlessly. Thanks to the sturdy double z-axis, the printer wobbles less. The 8mm thick y-axis shafts are designed to guide the build plate smoothly and last for a long time. Together these ensure that every print is printed perfectly. The printer is particularly easy to operate by means of the 3.2 inch colour display, which can be operated with the rotary knob. The UI uses motion graphics to display the leveling process, among other things. This way you can see at a glance what the printer is doing and what the progress is. Finally, the Ender-3 V3 SE has a stylish and compact design, making it perfect for any interior.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	490 x 364 x 364 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	Creality Spider / Ender-7	Max print volume:	12.1
Power rating:	350 W	Max print width:	22 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00192
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	7.12 kg
Filament sensor:	no

Order now, we can ship this today!

€169.00

€137.40 Excl. 23% VAT

In stock

Creality 3D Ender 3 V3 KE 3D printer

Zoom in

Description The Creality 3D Ender 3 V3 KE is one of the new printers from Creality. The printer has a compact design and is easy to assemble. Although it weighs little, it has the same functionalities as other printers. This gives you more freedom to get creative.

Make larger prints quickly
This printer has a Sprite Direct Drive extruder and can print super fast. With a maximum print speed of 500 mm/s, you can print a Benchy in no less than 15 minutes and 8 seconds. The build volume of 220mm x 220mm x 240mm gives you enough space to make larger prints.

Touchscreen operation
The Ender 3 V3 KE has a touchscreen with an intuitive UI. A smart self-test makes it possible to control the z-offset, auto levelling and more at the touch of a button. You also have a real-time preview of the model you are printing and vivid motion graphics showing the printing parameters.

Smart algorithms
The smart Creality operating system uses algorithms that ensure better quality of your print. For example, you can use the 'Input shaping' option, which reduces the vibration of the printer. You also have the option to use the 'motion advance' option, which optimizes the supply of filament. This ensures less ghosting and bumps.

Filaments at higher temperatures
This printer has a hot end with a 60W ceramic heater that can completely melt filaments for high-speed printing. This comes with a copper nozzle, allowing you to print at 300°C. This opens up a world of filaments you can print with, such as PLA, PETG, ABS and TPU.

Remote printing
Control and monitor the progress of your print wherever you are through LAN and Cloud printing. You can control your entire 3D printer via a WiFi network and your PC (Creality Print) or your smartphone (Creality Cloud APP, available for Apple and Android). If you own multiple printers, you can control them all online at the same time.

Other functionalities
The x-axis with linear rails ensure smooth movements and better precision. The cooling fans on two sides ensure super-fast cooling. This will cause the parts just printed to cool down quickly, which ensures a tight print.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	WiFi	Has laser option:	no
Dimensions:	490 x 364 x 364 mm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	100 °C
Nozzle diameter:	0.4 mm	Max print depth:	22 cm
Nozzle type:	M6H23	Max print height:	24 cm
Power rating:	350 W	Max print volume:	11.616
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00200
Has CNC option:	no	Weight:	7.12 kg

Order now, we can ship this today!

€239.00

€194.31 Excl. 23% VAT

In stock

Creality 3D K2 Plus Combo 3D Printer

Zoom in

2
1
0

Description Create amazing, multi-coloured 3D prints with the K2 Plus Combo 3D printer from Creality. This printer has a build volume of no less than 350mm x 350mm x 350mm, allowing you to easily create large 3D prints. The maximum print speed is up to 600mm/s with an acceleration of 30,000mm/s². Thanks to the active print chamber heating, the chamber is heated to 60˚C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed leveling and a 4.3 inch colour touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty, the automatic filament backup can load other filament and the filament tangle sensor gives a message when the filament is tangled.

Other functionalities
The K2 Plus Combo comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you do not suffer from toxic substances and unpleasant odours. You can send files via Ethernet, WiFi or with a USB stick. Print up to 4 colours or materials simultaneously or use the system for a backup spool of a colour or material that you use often.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	72.5 x 49.5 x 51.5 cm	Max print depth:	35 cm
Input voltage:	110-220V	Max print height:	35 cm
Nozzle diameter:	0.4 mm	Max print volume:	42.875
Printer bed levelling:	automatic	Max print width:	35 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	350 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00283
Has CNC option:	no	Variant:	With CFS
Filament sensor:	yes	Weight:	38.5 kg
Heated bed included:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this today!

€1,349.00

€1,096.75 Excl. 23% VAT

In stock

Elegoo Centauri Carbon 3D printer

Zoom in

3
2
1
0

Description Unleash your creativity with the Elegoo Centauri Carbon 3D printer. This powerful CoreXY printer combines speed, precision, and reliability in a sleek design, and is suitable for home users, makers, schools, and professionals. With a build volume of 25.6cm x 25.6cm x 25.6cm and support for a wide range of filaments, including carbon-reinforced material, you can make the most of your design ideas.

Print with speed and accuracy
Equipped with custom firmware and a powerful processor, the Centauri Carbon enables blazing fast prints of up to 500mm/s, without compromising on detail. The CoreXY structure with its stable build enables high speeds with minimal vibration, keeping your prints razor-sharp, even with complex models.

Professional choice of materials
Thanks to the robust hotend and heated bed, the Centauri is suitable for a wide variety of filaments, including PLA, PETG, ABS, ASA, TPU, PET, PC and PA. Want to print even stronger and more durable? Then use Carbon or Glass Fiber Reinforced filaments for industrial applications or technical parts.

Smart features for a smooth printing process
The Centauri Carbon is equipped with all the conveniences you would expect from a modern 3D printer. A filament run-out sensor prevents your print from failing when the spool is empty, while power loss recovery automatically resumes your print after a power failure. The built-in camera allows you to monitor your printing process remotely, ideal for longer or complex prints. You can easily operate it via the intuitive touchscreen.

For every user, from beginner to expert
Whether you’re a hobbyist experimenting at home, a 3D technology teacher, or a professional printing functional prototypes, the Centauri Carbon adapts to your needs. The combination of ease of use and advanced settings makes this printer suitable for all levels.

Specifications

Brand:	Elegoo	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	490 x 398 x 404 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	25.6 cm
Nozzle diameter:	0.4 mm	Max print height:	25.6 cm
Printer bed levelling:	automatic	Max print volume:	16.777
Printer extruder:	direct	Max print width:	25.6 cm
Extruder max temp:	320 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00326
Filament sensor:	yes	Weight:	17.5 kg

Order now, we can ship this today!

€299.99

€243.89 Excl. 23% VAT

In stock

Elegoo Mars 5 4K 3D printer

Zoom in

2
1
0

Description Create amazing 3D prints with the Mars 5 resin 3D printer from Elegoo. This 3D printer has a build volume of 142.43mm x 89.6mm x 150mm and a maximum print speed of 70mm/h. The xy resolution is 35 x 35 µm (4098 x 2560) and the z-axis precision is 0.02mm. The 6.6 inch 4K mono LCD screen uses an advanced COB light source, bringing small details and textures to life. The smart mechanical sensor helps you get even more out of your 3D print. Thanks to the residue detection, damage to the LCD screen is prevented. In addition, the Mars 5 gives a notification when there is a shortage of resin and problems with levelling. This means you can always make high-quality 3D prints.

Convenience first
The Mars 5 makes it even easier for you with the automatic bed levelling. This 3D printer also comes with a simple self-check. The printer checks whether all parts are working properly before it starts 3D printing. In addition, you do not have to worry about overheating, because the 3D printer gives an alarm when overheating and stops printing when the LED temperature exceeds 80˚C. The efficient cooling system ensures that the Mars 5 has a longer lifespan and can continue to perform optimally.

Other functionalities
The quick release design makes it easy to assemble and replace parts. It is also durable and can be used with the Mars Mate air freshener. The Mars 5 comes with an FEP release film and a laser engraved build plate, which ensures that 3D prints adhere well.

Specifications

Brand:	Elegoo	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Network:	no	Max print depth:	8.96 cm
Dimensions:	434 x 230 x 230 mm	Max print height:	15 cm
Input voltage:	100-240V	Max print volume:	1.927
Light source:	UV-COB	Max print width:	14.343 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00281
Has CNC option:	no	Variant:	Mars 5 4K
Filament sensor:	no	Weight:	8.26 kg
Heated bed included:	no

Order now, we can ship this today!

€179.00

€145.53 Excl. 23% VAT

In stock

Elegoo Mars 5 Ultra 9K 3D printer

Zoom in

2
1
0

Description Print super-sharp details with the Mars 5 Ultra resin 3D printer from Elegoo. This 3D printer has a build volume of 153.36mm x 77.76mm x 165mm and a maximum print speed of 150mm/h. The 7 inch 9K mono LCD screen has an xy resolution of 18 µm (8520 x 4320) and a z-axis precision of 0.02mm, making all the small details pop out. This allows you to make high-quality or high-speed 3D prints.

User friendly
The Mars 5 Ultra’s convenient automatic features make this 3D printer suitable for users of all levels. With just 1 click, you can start automatic bed levelling or let the printer perform a self-check. This ensures that everything is ready to start 3D printing. When it is time to replace the release film, the printer will notify you. Thanks to the COB (chip-on-board) light source, there is consistent curing and the advanced high-temperature protection ensures that overheating does not occur. When the LED temperature exceeds 80˚C, the smart system will sound an alarm and stop 3D printing.

Convenience first
The AI camera helps detect and alert you to errors so your 3D prints don’t fail. You can also monitor your 3D printing process in real-time and create time-lapse videos. The smart mechanical sensor lets you know when there is residue left behind so you can fix it. You will also be notified when there is a shortage of resin and when there are issues with levelling. You can easily resume printing after a power outage. The laser-engraved build plate ensures that your 3D prints stay in place during printing.

Other functionalities
The quick release design makes it easy to replace parts and clean the printer. The dual gutters allow you to pour resin into the vat from multiple sides, maximising your efficiency. The drain rack prevents resin from spreading into the environment. The Mars 5 Ultra comes with a tempered glass screen protector and an intuitive touchscreen.

Specifications

Brand:	Elegoo	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Network:	WiFi	Max print depth:	7.776 cm
Dimensions:	452 x 268 x 260 mm	Max print height:	16.5 cm
Input voltage:	100-240V	Max print volume:	1.967
Light source:	UV-COB	Max print width:	15.336 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00282
Has CNC option:	no	Variant:	Mars 5 Ultra 9K
Filament sensor:	no	Weight:	10.6 kg
Heated bed included:	no

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this today!

€289.00

€234.96 Excl. 23% VAT

In stock

Uniformation Gktwo 10.3" 8K Resin Printer

Zoom in

Description Take your prints to the next level with the GKtwo 10.3'' 8K Resin 3D printer from Uniformation. Thanks to the matrix parallel light source, it is possible to print extremely fine details, allowing you to effortlessly create highly detailed prints with this 3D printer. The GKtwo 10.3'' 8K has both an HD resolution of 7680 x 4320 and an XY resolution of 29.6μm.

User friendly
The 5-inch touchscreen has a user-friendly UI, making it easy to navigate between the different options. The LCD screen has a scratch-free protective film, which ensures that the screen cannot be damaged by leaking resin. This allows you to work on your creative ideas without any worries.

Choose convenience
It only takes 8 minutes for this printer to warm up to 35°C. This means you can start your 3D print nice and quickly. The built-in filter with carbon filter absorbs unpleasant and harmful odors. This will give you a pleasant 3D printing experience, without being bothered by the unpleasant odors that are normally released when printing with a resin 3D printer.

Other functionalities
This 3D printer has a construction volume of 228mm x 128mm x 245mm, so you can also make larger format prints. The build plate and resin barrel are both quick release, making them quick and easy to remove. You can remove them for maintenance in just 2 seconds. The compact design makes this printer ideal for every user: hobby and professional, in the office and at home.

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	455 x 350 x 315 mm	Max print depth:	12.8 cm
Input voltage:	110-220V	Max print height:	24.5 cm
Light source:	UV-COB	Max print volume:	7.15
Printer bed levelling:	automatic	Max print width:	22.8 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00225
Filament sensor:	no	Weight:	19.05 kg

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

Order now, we can ship this today!

€799.00

€649.59 Excl. 23% VAT

In stock

Original Prusa i3 MK3S+ 3D Printer KIT Self-assembly kit

Original Prusa i3 MK3S+ 3D Printer KIT DKI00229

Zoom in

2
1
0

Description The Original Prusa i3 MK3S+ is a powerful upgrade to the MK3S that features a SuperPINDA probe to improve the calibration of the first layer, as well as high-quality bearings and multiple design tweaks to improve usability.

Featuring a built-in filament sensor with a reliable trigger system, the MK3S+ knows when a filament strand has been inserted into the extruder. It’s also able to detect all filament types and colours, for added control and awareness of the printing process.

The helpful Power Loss Recovery feature ensures that the Original Prusa i3 MK3S+ fully recovers from power losses and continues printing from precisely where it stopped. It detects an interruption in the power supply and then shuts down the extruder heating and heatbed, finally saving the last known location, to prevent wasting your time and material.

High-temperature printing is supported with this powerful printer, with a maximum nozzle temperature of 300°C, as well as a maximum heatbed temperature of 120°C. These impressively high temperatures allow the Original Prusa i3 MK3S+ to support PLA, PETG, ASA filament and more.

Ensuring flexibility in terms of what you can print, the MK3S+ supports a build volume of 250mm x 210mm x 210mm, making it ideal for larger scale projects. Printing is fast and convenient thanks to the maximum travel speed of 200+ mm/s.

Please note: this product is a kit version of the Original Prusa i3 MK3S+ and requires assembly.

Perfect for schools, universities and all educational environments.

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	210 x 250 x 210 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	21 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	automatic	Max print volume:	11.025
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00229
Filament sensor:	yes	Weight:	7 kg

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

Order now, we can ship this today!

€757.00

€615.45 Excl. 23% VAT

In stock

Original Prusa i3 MK3S+ 3D Printer

Zoom in

2
1
0

Description The Original Prusa i3 MK3S+ 3D Printer is an upgraded version of the MK3S that features a SuperPINDA probe for better first-layer calibration. This printer supports a wide range of materials such as PLA, PETG, ASA, and more.

Thanks to the high-quality parts featured within this printer the MK3S+ can print objects in high quality up to 210mm whilst offering support for more flexible materials. This printer is capable of fully automatic mesh bed levelling ensuring any imperfections on the print sheet do not impact print quality.

The MK3S+ has useful features such as PowerLoss Recovery, which allows the printer to fully recover and resume in the case of power being lost and a filament sensor to detect different types and colours of filament.

With the Queit Noctua fan, this printer runs quietly.

Perfect for schools, universities and all educational environments.

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	210 x 250 x 210 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	21 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	automatic	Max print volume:	11.025
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00228
Filament sensor:	yes	Weight:	7 kg

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

Order now, we can ship this today!

€989.00

€804.07 Excl. 23% VAT

In stock

Original Prusa MK4S 3D Printer

Zoom in

3
2
1
0

Description Starting with 3D printing has never been easier! Take the printer out of the box, plug it in, let it run a quick Selftest, and start printing! No assembly required. With automatic calibration, always-perfect first layer, one-click printing and many other useful features, the MK4S is the best choice for your home, workshop, or company. All print profiles and configurations are in-house tested ensuring that the MK4S effortlessly delivers top-quality 3D prints at a press of a single button from the very start.

With an optional enclosure (available also in bundle with printer) and multi-material upgrade, you can expand your experience as you go, and print with advanced materials or create beautiful multi-coloured prints!

Build area: 250mm × 210mm × 220mm (WxDxH)
Layer height: 0.05mm - 0.30mm
1.75mm filaments: Not vendor-locked
0.4mm nozzle: Easy-to-swap
Removable print sheets
Open-source community-friendly

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	400 x 500 x 550 mm	Max print depth:	21 cm
Input voltage:	230CV	Max print height:	22 cm
Nozzle diameter:	0.4 mm	Max print volume:	11.55
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00287
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	7 kg
Heated bed included:	yes

Order now, we can ship this today!

€999.00

€812.20 Excl. 23% VAT

€1,095.00 Prusa rrp

In stock

Original Prusa CORE One 3D printer

Zoom in

2
1
0

Description The CORE One is a fully enclosed CoreXY 3D printer with active temperature control designed for top print quality and speed. Easy to set up and made to last, this rugged machine is perfect for beginners and professionals alike. Designed and manufactured in the EU.

Whether you're new to 3D printing or a seasoned expert, Prusa CORE One ticks all the boxes for a reliable all-around machine. Featuring an enclosed chamber and CoreXY design, it combines high-speed printing and maximum print quality with a large 250mm × 220mm × 270mm print area. And there are plenty of clever design choices, e.g., an all-steel exoskeleton frame for maximum firmness and robustness. You’ll be ready to print your first model in minutes thanks to intuitive software and one-click printing.

The CORE One is a 3D printing workhorse engineered in the proven Prusa tradition. Designed with a "made to last" philosophy and made from premium materials, the CORE One offers exceptional reliability with minimal maintenance. The enclosed chamber, capable of reaching up to 55°C, features active temperature control for high-quality printing across a wide range of materials from PLA and PETG (even with the door closed) to more demanding materials like ASA, PC, or Nylon.

Unpack the printer, perform a one-time calibration, and you’re ready to go. Equipped with advanced sensors for hassle-free printing, the CORE One is a true “start and forget” machine. Simply start your print and let the printer handle the rest, from fully automatic first-layer calibration to pausing the print and sending a notification if the filament runs out.

You can be sure that with our internally developed, quality-focused print profiles, your models will turn out exactly the way they were designed, with perfect dimensional accuracy. CORE One takes advantage of the upgraded Nextruder with 360° cooling that enables flawless printing of 75° overhangs, saving both time and material.

The chamber is as compact as possible, with a cleverly designed recess on each side to minimise its volume. This allows the chamber to quickly reach higher temperatures (up to 55°C), enabling you to print ASA, ABS, PC, PA (Nylons), and other advanced materials smoothly, without warping. The automatic ventilation system and active temperature control enable flawless printing of PLA - even with the door completely closed!

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	555 x 415 x 444 mm	Max print depth:	22 cm
Input voltage:	230CV	Max print height:	27 cm
Nozzle diameter:	0.4 mm	Max print volume:	14.85
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:		Our item no:	DKI00313
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	22.5 kg
Heated bed included:	yes

Order now, we can ship this today!

€1,349.00

€1,096.75 Excl. 23% VAT

In stock

Original Prusa XL Semi-Assembled, Single-toolhead 3D printer

Zoom in

Description With the Original Prusa XL you can easily make large 3D prints. This printer has a large construction volume of 360mm x 360mm x 360mm, so you no longer have to print large prints in multiple parts. The Original Prusa XL comes semi-assembled, so you have to partly assemble it yourself.

Possibility to expand
Easily expand this 3D printer with additional print heads to work with multiple colors and materials at the same time. You can connect up to 5 print heads at the same time and easily switch between them. Use multiple colors or print the supports with a soluble filament: endless possibilities.

Other functionalities
Thanks to the 32-bit MCU, input shaper and 'pressure advance', super-fast printing is possible. The Nextruder ensures that the first layer is always printed perfectly, even when printing with multiple print heads. This ensures you of a good basis for your 3D prints. For better quality and reliability during printing, this 3D printer has a modular, segmented heatbed. Because the 16 tiles of the heatbed can be controlled individually, the bed can be precisely adapted to your model. You can easily operate the Original XL 3D printer via the Prusa Connect network or offline.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00265
Has CNC option:	no	Variant:	Semi-Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

Order now, we can ship this today!

€2,049.00

€1,665.85 Excl. 23% VAT

In stock

Original Prusa XL Assembled, Single-toolhead 3D printer

Zoom in

Description Create large, fantastic 3D prints with the Original XL 3D printer from Prusa. The Original Prusa XL has a construction volume of no less than 360mm x 360mm x 360mm, making it easy to make larger prints in one go. This printer comes fully assembled, so you no longer have to assemble it yourself and you can immediately start making 3D prints.

Possibility to expand
Would you like to work with multiple materials or colors in one print? Then you can expand this printer with additional print heads. Connect up to 5 print heads and easily switch between them. Use multiple colors or print your supports with a soluble filament: the possibilities are endless.

Other functionalities
The 32 bit MCU, input shaper and pressure advance ensure super-fast printing. In addition, the Nextruder ensures that a perfect first layer is always printed, even when working with multiple print heads. This ensures you have a good basis for your 3D prints. The modular segmented heatbed improves quality and reliability during printing. The 16 tiles of the heatbed can be controlled individually and thus precisely adapted to your model. You can easily operate the Original XL 3D printer via the Prusa Connect network or offline.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00264
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Order now, we can ship this today!

€2,349.00

€1,909.76 Excl. 23% VAT

In stock

Original Prusa XL Semi-assembled 2-toolhead 3D Printer

Zoom in

Description The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36cm×36cm×36cm (14.17''×14.17''×14.17'') and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00276
Has CNC option:	no	Variant:	Semi-Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Order now, we can ship this today!

€2,499.00

€2,031.71 Excl. 23% VAT

In stock

Original Prusa XL Assembled 5-toolhead 3D Printer

Zoom in

3
2
1
0

Description

Introducing the Original Prusa XL Assembled 5-toolhead 3D Printer, the ultimate solution for multi-material and multi-color 3D printing. Fully assembled and ready to use right out of the box, this advanced printer features five independent toolheads, enabling complex and precise prints with ease. Its large build volume and top-tier components ensure exceptional print quality and reliability, making it perfect for both professional and enthusiast applications. Experience the convenience of a pre-assembled machine combined with the innovation and performance that Prusa is renowned for. Transform your 3D printing projects with the Original Prusa XL’s cutting-edge technology and superior craftsmanship.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	5
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00274
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

Order now, we can ship this today!

€3,999.00

€3,251.22 Excl. 23% VAT

In stock

Elegoo Neptune 4 Pro 3D printer

Zoom in

Description The Neptune 4 Pro 3D printer from Elegoo has the fantastic features of the Neptune 4 and more. The extra advantage of this printer is the build plate. In addition to the 11 x 11 auto bed leveling system, this printer has a smart heated bed consisting of segments. During slicing, the slicing software recognizes the size of the model that is going to be printed and activates a secondary heating zone when the model is larger than the heating zone in the center (120mm x 120mm). The two parts can also be switched on and off manually to regulate the temperature more precisely. In addition, the surface of the magnetic PEI sheet is marked.

The Neptune 4 Pro is specially designed for fast and efficient printing. The silent Klipper motherboard and the ARM 64/bit 1.5G frequency quad-core processor, which allows the maximum print speed to reach 500 mm per second, contribute to this. The nozzle can reach a temperature of 300C and supports printing with PLA, PETG, ABS, TPU and Nylon, among others. The extended hot end ensures consistent filament heating and faster extrusion. In addition to the 2 fans on the sides of the print head, which ensure good cooling, there are 4 fans behind the print head. These allow new layers to cool very quickly, even at high printing speeds. The new self-developed dual-gear direct extruder with a reduction ratio of 5.2:1 ensures powerful extrusion and smoother filament guidance.

Furthermore, you can still use functions such as previewing the model, pausing the print and resuming a print after a power outage. You simply send your model to the printer via USB or LAN and you can detach the 4.3'' touchscreen from the printer to operate it remotely. Improve the quality of your print in an instant by using the input shaping and/or pressure advance functions that this printer supports. With the Neptune 4 Pro you always have an optimal printing experience.

Specifications

Brand:	Elegoo	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	ethernet	Printer has USB:	yes
Dimensions:	515 x 475 x 445 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	22.5 cm
Power rating:	250 W	Max print height:	26.5 cm
Printer bed levelling:	semi-automatic	Max print volume:	13.4
Printer extruder:	direct	Max print width:	22.5 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00180
Filament sensor:	yes	Weight:	11 kg

Order now, we can ship this today!

€239.00

€194.31 Excl. 23% VAT

In stock

Anycubic Kobra S1 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600mm/s, you can create the coolest projects in no time. In addition, this 3D printer has handy functions that make it even easier for you.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320˚C full metal hotend, a 120˚C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic leveling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odors.

Other functionalities
The 4.3 inch touchscreen has an intuitive UI, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	490 x 400 x 410 mm	Max print depth:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Nozzle diameter:	0.4 mm	Max print volume:	15.625
Power rating:	1,500 W	Max print width:	25 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	320 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	yes	Our item no:	DKI00318
Has CNC option:	no	Variant:	Without ACE Pro
Filament sensor:	yes	Weight:	15.5 kg
Heated bed included:	yes

Order now, we can ship this today!

€349.00

€283.74 Excl. 23% VAT

In stock

Elegoo Neptune 4 Max 3D printer

Zoom in

Description Realise your grand 3D printing plans with the Elegoo Neptune 4 Max 3D printer. At 420mm x 420mm x 480mm, this printer has the largest construction volume within the Elegoo Neptune 4 family. The efficient cooling system, the auto bed levelling at 11 x 11 points and the magnetic PEI building plate make it even easier for you. You can transfer your files quickly and easily via WIFI, WLAN or USB.

Fast and accurate printing
The Neptune 4 Plus comes with the powerful Klipper firmware already installed, allowing your print speed to increase to 500mm/s. The ARM 64-bit 1.5 G quad-core processor also helps with this. The acceleration sensors on the x and y axes automatically calibrate and thus improve print quality. The dual-gear direct extruder ensures fast and precise extrusion, resulting in accurately printed models.

Different filaments
The nozzle heats up to 300℃. This also allows you to easily use materials that need to be printed at a higher temperature, such as ABS, TPU and Nylon. Using these materials gives you many more options for models and prints.

Specifications

Brand:	Elegoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	80 °C
Dimensions:	740 x 658 x 632 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print height:	48 cm
Printer bed levelling:	semi-automatic	Max print volume:	84.672
Printer extruder:	direct	Max print width:	42 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00213
Filament sensor:	yes	Weight:	22.2 kg
Heated bed included:	yes

Order now, we can ship this today!

€439.00

€356.91 Excl. 23% VAT

In stock

Creality 3D K1 Max 3D printer ⭐ Our choice for a fast and large printer

Zoom in

Description The Creality 3D K1 Max is an FDM 3D printer that is distinguished by its high printing speed and large build volume. The printer has a CoreXY structure and a lightweight print head that can reach speeds of up to 600 mm/s. The printer also has many smart features that simplify and improve the printing process. It has an AI LiDAR scanner that automatically scans the first layer and detects any errors. It also has an AI camera that monitors the print status and alerts you to any problems, such as spaghetti errors or foreign objects. It also has an RTC (real-time clock) that records the time accurately, even when the printer is turned off.

In addition, the K1 Max uses the smart Creality OS, which has a simple UI and synchronizes data and commands with PC, phone, cloud and add-on modules. The Creality 3D K1 Max is a versatile and powerful FDM 3D printer suitable for various projects and applications. It has a build volume of 300 x 300 x 300 mm, which is ideal for prototyping and design verification.

You can use the following filaments on the K1 Max:

PLA
ABS
PETG
TPU
PA
PC

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	work ethernet WiFi	Has laser option:	no
Dimensions:	52.6 x 43.5 x 46.2 cm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	120 °C
Nozzle diameter:	0.4 mm	Max print depth:	30 cm
Nozzle type:	-	Max print height:	30 cm
Power rating:	1,000 W	Max print volume:	27
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00164
Has CNC option:	no	Weight:	18 kg

Order now, we can ship this today!

€699.00

€568.29 Excl. 23% VAT

In stock

Elegoo Mars 4 Ultra 9K 3D printer

Zoom in

Description With the ELEGOO Mars 4 Ultra you can easily print complex models while retaining the smallest details. The 7-inch 9K mono LCD screen with 8520x4320 resolution and 18µm XY resolution ensures that you can make sharp prints in an instant. With the ELEGOO Mars 4 Ultra it is possible to achieve a printing speed of 150 mm per hour. The LCD screen is protected with a tempered glass plate, so that it is not damaged during daily use. With the built-in 4G RAM, you never have to worry about a delay in loading files again. The powerful Linux OS control ensures fast and smooth operation and by connecting to a 2.4G or 5G WiFi network, you can send models to the printer super quickly.

The build area of 153.36mm x 77.76mm x 165mm³ offers enough space to make medium-sized prints. The leveling system, which levels at 4 points, ensures that you can quickly start printing. The laser engraved surface of the build plate provides better layer adhesion and thus reduces the chance of the print failing. With the brand new ACF film you are assured of a successful print, even with a high print speed. The plug-in air filter has a new carbon filter that removes the unpleasant smell of printing with resin. Not only does this improve the printing experience, but you also print in a cleaner environment for yourself with less chance of ingesting toxic substances. Easily find your way via the user-friendly 4'' HD IPS touchscreen with a resolution of 800x480 pixels, which supports no fewer than 12 different languages.

The ELEGOO Mars 4 Ultra has a full metal machine housing, making the printer very stable and easy to use frequently. The modern design is also aesthetically pleasing to look at. The printer's internal components are protected from resin by a raised center plate.

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	44.35 x 22.7 x 22.7 mm	Max print depth:	15.636 cm
Input voltage:	100-240V	Max print height:	16.5 cm
Max. Light Intensity:	4	Max print volume:	2.006
Light source:	UV-COB	Max print width:	7.776 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00182
Has CNC option:	no	Weight:	17.3 kg
Filament sensor:	no

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

Order now, we can ship this today!

€239.99

€195.11 Excl. 23% VAT

In stock

Elegoo Saturn 3 12K 3D printer

Zoom in

Description The Elegoo Saturn 3 resin printer has a 10'' 12K mono LCD screen with a tempered glass plate, which protects the screen from scratches and damage caused by resin leakage. The large build volume opens up a world of possibilities and is perfect for creating larger models and more ambitious projects. The COB (chip-on-board) light source and collimating Fresnel lens work together to create a uniform beam of light that shines onto the resin from the perfect angle. This creates very accurate prints with an exceptional level of detail.

The Saturn 3 12K also has a laser-engraved build plate for better adhesion of the first layer, allowing you to effortlessly print highly detailed and complicated models. The USB air purification filter ensures an odorless printing environment. This allows you to print without worries. You can also choose to use this printer in combination with the Elegoo Mars Mate. This resin printer uses the Voxeldance Tango software, which offers 3 options: static mode and dynamic mode (including smooth mode and high-speed mode).

The most important features:

LCD screen resolution of 11520x5120, XY resolution of 19x24 µm
218.88mm x 122.88mm x 250mm construction volume
COB light source with collimating Fresnel lens
Laser engraved building plate
USB air purification filter

Specifications

Brand:	Elegoo	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	56.73 x 30.59 x 27.3 cm	Max print depth:	12.3 cm
Input voltage:	100-240V	Max print height:	25 cm
Max. Light Intensity:	4.4	Max print volume:	6.703
Light source:	UV LCD	Max print width:	21.8 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00179
Has CNC option:	no	Wavelength:	405 nm
Filament sensor:	no	Weight:	15.2 kg

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

Order now, we can ship this today!

€397.00

€322.76 Excl. 23% VAT

In stock

Flsun Q5 Delta 3D Printer

Zoom in

Description The Flsun Q5 3D printer is a compact printer and is perfect if you are printing at high speed or printing something that requires high level of detail. The delta design reduces weight on the print head, allowing for smoother and faster control. With a cylindrical build volume of 200mm x 200mm, Titan extruder and a handy 2.4-inch touchscreen, the Flsun Q5 is equipped with many upgrades and therefore stands out above other printers in this class.

The main features

High print speed 70mm/s-120mm/s.
Easy assembly.
Powerful 32-Bit Motherboard.
TMC2208 silent steps drivers

Construction
The Flsun Q5 consists of a sturdy triangular aluminium frame with a matte black coating and yellow slot covers. The stepper motors that drive the sliders via a belt are located in the upper part. Thanks to the use of TMC2208 Drivers, the printer is quieter. The power supply and motherboard are located in the upper part of the printer. In general, delta printers are more difficult to calibrate than cartesian printers, but calibration of the Flsun Q5 comes with a handy calibration tool to facilitate this process. This tool has a magnetic strip, which makes it easy to apply and remove. The printer is also equipped with thermal runaway protection.

Specifications

Brand:	Flsun	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	650 x 300 x 300 mm	Heatbed max temp:	110 °C
Input voltage:	115-230V	Max print depth:	20 cm
Nozzle diameter:	0.4 mm	Max print height:	20 cm
Printer bed levelling:	automatic	Max print volume:	6.28
Printer extruder:	bowden	Max print width:	20 cm
Extruder max temp:	270 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00116
Filament sensor:	no	Weight:	7 kg

Extra Information

3D Filament
Print bed accessories
Cleaning items

Order now, we can ship this today!

€229.00

€186.18 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

All 3D printers

Popular products