Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

Anycubic3D Anycubic Photon Mono M7 Max 3D printer DKI00317

1
0

Description The Anycubic Photon Mono M7 Max is a large 3D printer equipped with a 7.6-inch LCD screen and a 4K resolution (3840 x 2400 pixels) that delivers sharp and detailed prints. It supports large-scale printing with a build volume of 218mm x 123mm x 235mm. Utilising UV resin printing technology and faster processing, the Mono LCD system enables quicker printing and extends the lifespan of the screen. Additionally, it comes with an easy-to-use control system and automatic calibration features that make it convenient for users of all levels.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	652 x 425 x 362 mm	Max print depth:	16.4 cm
Input voltage:	110-240V	Max print height:	30 cm
Light source:	UV LED	Max print volume:	14.661
Printer bed levelling:	automatic	Max print width:	29.8 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00317
Filament sensor:	no	Weight:	24 kg

€749.00 (Incl. 23% VAT)
(€608.94 Excl. 23% VAT)

EU warehouse

Uniformation GK3 Pro 3D Printer Pre-Order

Uniformation GK3 Pro 3D Printer DKI00325

Zoom in

2
1
0

Description Pre-Order

Get high-precision 3D printing with Uniformation's GK3 Pro 3D printer. The 16K 9.6-inch high-transmissivity display has a resolution of 15120 x 6230 and a pixel size of 14 x 19 µm. In addition, the display has a painted polariser for better performance and durability. The build volume of 211mm x 118mm x 240mm offers enough space for medium to large 3D prints. The printer comes with 3 print modes: 'precision', 'speed' and 'ultra mode'. This means there is a suitable option for every 3D print.

Smart & automatic
The smart automatic resin supply system monitors the resin level and ensures that there is enough resin for making the 3D print. In addition, not only the resin level in the barrel is monitored, but also that in the cartridge so that you can replace it in time. This 3D printer uses an automatic heating system for even heating of the resin. It comes with preheating and automatic temperature detection. It also heats up to 25˚C within 25 minutes.

Precision
This 3D printer has a shorter UV wavelength of 385nm, which allows for more precise control over curing. The collimating Fresnel lens refines the light from the COB, allowing for very precise refraction of light. This improves precision and detail in 3D prints.

User friendly
The quick release design of the build plate and resin vat make it easier to clean and replace parts. The drip tray helps to drain excess resin from the print before it cures. In addition, the touchscreen can be rotated 90˚ for easy operation. The built-in camera can be used to monitor the printing process and create time lapse videos.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

*Please note that all pre-order delivery dates are subject to change without warning.
You can cancel your order for a refund at any time prior to delivery.

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	-	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	520 x 392 x 332 mm	Max print depth:	21.1 cm
Input voltage:	110-220V	Max print height:	24 cm
Light source:	UV-COB	Max print volume:	5.975
Printer bed levelling:	manual	Max print width:	11.8 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00325
Filament sensor:	no	Weight:	17 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€759.00 (Incl. 23% VAT)
(€617.07 Excl. 23% VAT)

EU warehouse

Uniformation GK3 Ultra 16K 3D printer

Zoom in

2
1
0

Description Create stunning resin 3D prints with the GK3 Ultra 16K 3D printer from Uniformation. This printer has a maximum build volume of 300mm x 160mm x 300mm, an XY resolution of 15120 x 6230 and a pixel pitch of 20 x 26 µm. The 13.5 inch 16K mono LCD screen is 302.4mm x 161.98mm. This allows you to create large 3D prints with sharp details.

User friendly
Thanks to its convenient features, this 3D printer is very user-friendly. The lid opens upwards and the parts are easy to remove for maintenance or replacement. You can easily detach the build plate and place it on the drip hanger to let the excess resin drain before you let your 3D print cure. This prevents resin drips from curing, which can cause unevenness in the surface of your 3D print.

Smart features
The GK3 Ultra is equipped with an automatic resin supply system. This means you no longer have to worry about adding resin yourself. You place the resin bottle in the tank and it will automatically be guided to the barrel, even during 3D printing. This way, there is always enough resin available to make your 3D print. In addition, this system monitors whether there is any leftover resin. The smart auto-detection heat system constantly ensures the right temperature, so that your 3D prints can be printed even better.

Other functionalities
The GK3 is designed to be very sturdy. The dual linear rails ensure that the machine wobbles less. This creates tighter 3D prints and increases the quality of your prints. The printer uses 200W and the vat can hold 1100ml of resin. You can easily control this 3D printer via the 5 inch touchscreen and slice files with the UniFormation Slicer, Chitubox or Lychee. Send files via wifi, ethernet or use a USB stick.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Included with the GK3 Ultra:

Construction sheet
Resin barrel
Charging cable
USB stick
Screen protector
nFEP film
USB wifi
Tools (such as pliers, metal scraper, and a funnel)

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	575 x 455 x 400 mm	Max print depth:	16 cm
Input voltage:	110-220V	Max print height:	30 cm
Light source:	UV-COB	Max print volume:	14.4
Printer bed levelling:	automatic	Max print width:	30 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00289
Filament sensor:	no	Weight:	30 kg

€1,210.00 (Incl. 23% VAT)
(€983.74 Excl. 23% VAT)

EU warehouse

Original Prusa MK4S 3D Printer Kit

Zoom in

3
2
1
0

Description Starting with 3D printing has never been easier! With automatic calibration, always-perfect first layer, one-click printing and many other useful features, the MK4S is the best choice for your home, workshop, or company. All print profiles and configurations are in-house tested ensuring that the MK4S effortlessly delivers top-quality 3D prints at a press of a single button from the very start.

With an optional enclosure (available also in bundle with printer) and multi-material upgrade, you can expand your experience as you go, and print with advanced materials or create beautiful multi-coloured prints!

Build area: 250mm × 210mm × 220mm (WxDxH)
Layer height: 0.05mm - 0.30mm
1.75mm filaments: Not vendor-locked
0.4mm nozzle: Easy-to-swap
Removable print sheets
Open-source community-friendly

Please note: This is a kit version and requires assembly

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	400 x 500 x 550 mm	Max print depth:	21 cm
Input voltage:	230CV	Max print height:	22 cm
Nozzle diameter:	0.4 mm	Max print volume:	11.55
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00288
Has CNC option:	no	Variant:	Kit
Filament sensor:	yes	Weight:	7 kg
Heated bed included:	yes

€910.00 (Incl. 23% VAT)
(€739.84 Excl. 23% VAT)

EU warehouse

Original Prusa MK4 3D Printer KIT Self-assembly kit

Prusa Original Prusa MK4 3D Printer KIT DKI00231

Zoom in

3
2
1
0

Description A fully assembled version of the Original Prusa MK4 is also available via 123-3D.

Introducing the latest version of the 3D printing powerhouse from Prusa, the Original Prusa MK4. This powerful 3D printer includes all the safety and reliability features of its predecessor but also sports fast performance, allowing you to print more in less time.

New features include quick-swap nozzles, remote printing, one-click printing and a Loadcell sensor. This sensor ensures a consistently smooth first layer without the need for manual adjustment. The Original Prusa MK4 also prints up to 70% faster than the MK3 thanks to Pressure Advance and Input shaper technology.

The potential of this printer is supported by an impressively spacious build volume of 250 x 210 x 220mm, allowing you to print large-scale projects. Additionally, with a maximum heatbed temperature of 120°C and a maximum nozzle temperature of 290°C, the MK4 can work with PLA, ASA, PETG filament and more. Finally, the colour LCD screen with an intuitive UI supports QR codes and G-code thumbnails, for greater ease of use.

Please note: this product is a kit version of the Original Prusa MK4 and requires assembly.

Perfect for schools, universities and all educational environments.

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	400 x 500 x 550 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer bed levelling:	automatic	Max print volume:	11.55
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	290 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00231
Filament sensor:	yes	Weight:	7 kg

€914.50 (Incl. 23% VAT)
(€743.50 Excl. 23% VAT)

EU warehouse

Original Prusa MK4S Enclosure Bundle

Zoom in

2
1
0

Description The Original Prusa MK4S delivers reliable results for all your projects. Building on the MK4 model loved by hobbyists and big companies alike, it offers even higher accuracy and print speed. Thanks to its new 360° cooling, high-flow nozzle, and numerous firmware optimisations, you’ll get your 3D models fast and with top-notch quality.

The MK4S answers your needs whether you’re just starting or have years of experience. We’ve designed the UI to be easy to use even for complete beginners, yet its reliable performance also makes it a perfect fit for professional workshops. Getting started is super easy: simply take the MK4S out of the box, plug it in, perform a quick calibration, and start printing in 15 minutes!

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	400 x 500 x 550 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	21 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer bed levelling:	automatic	Max print volume:	11.55
Printer extruder:	direct	Max print width:	25 cm
Extruder max temp:	290 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00314
Filament sensor:	yes	Weight:	7 kg

€1,083.87 (Incl. 23% VAT)
(€881.20 Excl. 23% VAT)

EU warehouse

Original Prusa MK4S 3D Printer

Zoom in

3
2
1
0

Description Starting with 3D printing has never been easier! Take the printer out of the box, plug it in, let it run a quick Selftest, and start printing! No assembly required. With automatic calibration, always-perfect first layer, one-click printing and many other useful features, the MK4S is the best choice for your home, workshop, or company. All print profiles and configurations are in-house tested ensuring that the MK4S effortlessly delivers top-quality 3D prints at a press of a single button from the very start.

With an optional enclosure (available also in bundle with printer) and multi-material upgrade, you can expand your experience as you go, and print with advanced materials or create beautiful multi-coloured prints!

Build area: 250mm × 210mm × 220mm (WxDxH)
Layer height: 0.05mm - 0.30mm
1.75mm filaments: Not vendor-locked
0.4mm nozzle: Easy-to-swap
Removable print sheets
Open-source community-friendly

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	400 x 500 x 550 mm	Max print depth:	21 cm
Input voltage:	230CV	Max print height:	22 cm
Nozzle diameter:	0.4 mm	Max print volume:	11.55
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00287
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	7 kg
Heated bed included:	yes

€1,095.00 (Incl. 23% VAT)
(€890.24 Excl. 23% VAT)

EU warehouse

Original Prusa MK4 3D Printer

Zoom in

3
2
1
0

Description Introducing the Original Prusa MK4 3D printer, a powerful machine capable of creating high-quality prints with intricate details. The Prusa MK4 prioritises safety and durability and is great for both manufacturing and home use.

This 3D printer from Prusa means that high-speed printing is made effortless, as Pressure Advance and Input Shaper technology is included in the firmware of the MK4. This is used to accurately predict the filament’s flow and prevent any resonance in prints. Print time is thereby decreased by up to 70% when compared with the MK3.

With a build volume of 250 x 210 x 220mm, the expansive build area of the Original Prusa MK4 allows you to print large-scale projects without having to worry about running out of space.

Designed to prevent inconvenience, the precision of the Loadcell sensor, for example, enables you to print a smooth first layer consistently and automatically, without needing any input from the user.

Giving you even more flexibility when it comes to choosing what to 3D print, the Prusa MK4 supports an extensive range of filaments (PLA, PETG, ASA, flexible filament, Polycarbonate and Polypropylene).

Simple to use, the Original Prusa MK4 3D printer features a 3.5” graphic 65k colour screen with a user-friendly interface that supports QR codes. For added convenience, the footer panel of the display can even be customised. The RGB status bar allows you to be more in control of your prints too. The self-developed multiplatform slicer, PrusaSlicer, streamlines the slicing process, enabling you to get printing faster.

Perfect for schools, universities and all educational environments.

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	400 x 500 x 550 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer bed levelling:	automatic	Max print volume:	11.55
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	290 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00230
Filament sensor:	yes	Weight:	7 kg

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

€1,237.00 (Incl. 23% VAT)
(€1,005.69 Excl. 23% VAT)

EU warehouse

Original Prusa CORE One 3D printer

Zoom in

2
1
0

Description The CORE One is a fully enclosed CoreXY 3D printer with active temperature control designed for top print quality and speed. Easy to set up and made to last, this rugged machine is perfect for beginners and professionals alike. Designed and manufactured in the EU.

Whether you're new to 3D printing or a seasoned expert, Prusa CORE One ticks all the boxes for a reliable all-around machine. Featuring an enclosed chamber and CoreXY design, it combines high-speed printing and maximum print quality with a large 250mm × 220mm × 270mm print area. And there are plenty of clever design choices, e.g., an all-steel exoskeleton frame for maximum firmness and robustness. You’ll be ready to print your first model in minutes thanks to intuitive software and one-click printing.

The CORE One is a 3D printing workhorse engineered in the proven Prusa tradition. Designed with a "made to last" philosophy and made from premium materials, the CORE One offers exceptional reliability with minimal maintenance. The enclosed chamber, capable of reaching up to 55°C, features active temperature control for high-quality printing across a wide range of materials from PLA and PETG (even with the door closed) to more demanding materials like ASA, PC, or Nylon.

Unpack the printer, perform a one-time calibration, and you’re ready to go. Equipped with advanced sensors for hassle-free printing, the CORE One is a true “start and forget” machine. Simply start your print and let the printer handle the rest, from fully automatic first-layer calibration to pausing the print and sending a notification if the filament runs out.

You can be sure that with our internally developed, quality-focused print profiles, your models will turn out exactly the way they were designed, with perfect dimensional accuracy. CORE One takes advantage of the upgraded Nextruder with 360° cooling that enables flawless printing of 75° overhangs, saving both time and material.

The chamber is as compact as possible, with a cleverly designed recess on each side to minimise its volume. This allows the chamber to quickly reach higher temperatures (up to 55°C), enabling you to print ASA, ABS, PC, PA (Nylons), and other advanced materials smoothly, without warping. The automatic ventilation system and active temperature control enable flawless printing of PLA - even with the door completely closed!

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	555 x 415 x 444 mm	Max print depth:	22 cm
Input voltage:	230CV	Max print height:	27 cm
Nozzle diameter:	0.4 mm	Max print volume:	14.85
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:		Our item no:	DKI00313
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	22.5 kg
Heated bed included:	yes

€1,399.00 (Incl. 23% VAT)
(€1,137.40 Excl. 23% VAT)

EU warehouse

Elegoo Neptune 4 Plus 3D printer

Zoom in

Description Bring your creative ideas to life with the Elegoo Neptune 4 Plus 3D printer. Print larger models with a build volume of 320mm x 320mm x 385mm. The efficient cooling system, auto bed leveling at 11 x 11 points and the magnetic PEI build plate make it even easier for you. You can transfer your files quickly and easily via WIFI, WLAN or USB.

Fast and accurate printing
The Neptune 4 Plus comes with the powerful Klipper firmware already installed, allowing your print speed to increase to 500mm/s. The ARM 64-bit 1.5 G quad-core processor also helps with this. The acceleration sensors on the x and y axes calibrate automatically and thus improve the print quality. The dual-gear direct extruder ensures fast and precise extrusion, resulting in accurately printed models.

Different filaments
The nozzle heats up to 300℃. This also allows you to easily use materials that need to be printed at a higher temperature, such as ABS, TPU and Nylon. Using these materials gives you many more possibilities for models and prints.

Specifications

Brand:	Elegoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	110 °C
Dimensions:	638 x 533 x 517 mm	Max print depth:	32 cm
Input voltage:	100-240V	Max print height:	38.5 cm
Printer bed levelling:	automatic	Max print volume:	39.424
Printer extruder:	direct	Max print width:	32 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00212
Filament sensor:	yes	Weight:	17.1 kg
Heated bed included:	yes

€359.00 (Incl. 23% VAT)
(€291.87 Excl. 23% VAT)

EU warehouse

Anycubic Kobra S1 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600mm/s, you can create the coolest projects in no time. In addition, this 3D printer has handy functions that make it even easier for you.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320˚C full metal hotend, a 120˚C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic leveling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odors.

Other functionalities
The 4.3 inch touchscreen has an intuitive UI, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	490 x 400 x 410 mm	Max print depth:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Nozzle diameter:	0.4 mm	Max print volume:	15.625
Power rating:	1,500 W	Max print width:	25 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	320 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	yes	Our item no:	DKI00318
Has CNC option:	no	Variant:	Without ACE Pro
Filament sensor:	yes	Weight:	15.5 kg
Heated bed included:	yes

€399.00 (Incl. 23% VAT)
(€324.39 Excl. 23% VAT)

EU warehouse

Flashforge Adventurer AD5X 3D Printer Pre-Order

Flashforge Adventurer AD5X 3D Printer DKI00305

Zoom in

1
0

Description Pre-Order: This item is expected in June.

Bring your colourful ideas to life with the Adventurer AD5X 3D printer from Flashforge. This user-friendly printer is easy to use and can print at high speed. With a maximum print speed of 600mm/s and an acceleration of 20,000mm/s², you won't have to wait long for your 3D print to be ready. Thanks to the multi-material system, you can print with up to 4 colours simultaneously without manually changing the spool. This saves you time and effort.

User friendly
In just 3 easy steps, the Adventurer AD5X is ready to use and ready to go. The quick release nozzle is easy to change and the multi-material system makes 3D printing with multiple colours even easier. The system automatically switches to the next colour or to a new spool of the same colour in the case of a single-color print. With the help of the 'power outage recovery' function, you can continue your 3D print after a power outage, reducing the chance of a failed 3D print.

Excellent results
The Adventurer AD5X’s CoreXY construction reduces vibrations, ensuring accurate details every time. When changing colours, the nozzle is cleaned to prevent colours from bleeding into each other. In addition, this 3D printer produces high-quality prints with smooth surfaces and sharp edges. The 5X can be used with a wide variety of filaments, including PLA, PETG, ASA, and TPU. This gives you creative freedom during 3D printing.

Other functionalities
This compact 3D printer is 220mm x 220mm x 220mm and comes with a flexible steel build plate. The maximum bed temperature is 110˚C and the extruder temperature can reach 300˚C. The printer is equipped with a 4.3 inch touchscreen and has automatic bed levelling.

*Please note that all pre-order delivery dates are subject to change without warning.
You can cancel your order for a refund at any time prior to delivery.

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	510 x 435 x 435 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer bed levelling:	automatic	Max print volume:	10.648
Printer extruder:	direct	Max print width:	22 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00305
Filament sensor:	yes	Weight:	14 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€419.50 (Incl. 23% VAT)
(€341.06 Excl. 23% VAT)

EU warehouse

Flashforge Adventurer 5M Pro 3D printer

Zoom in

Description Your Flashforge Adventurer 5M Pro 3D printer will be ready to print within 10 minutes. This super fast printer easily achieves a print speed of up to 600mm/s. Most prints can be printed in just a few hours. The double-sided, flexible, steel build plate with PEI coating allows you to easily remove your model after printing. The construction volume is 220mm x 220mm x 220mm.

Convenience first
The automatic bed levelling system can be activated at the touch of a button. This ensures you get the perfect first layer. The 'run-out' alert indicates when the spool of filament is low and pauses the print. The 'power loss recovery' pauses the print in the event of a power failure. Both ensure that the chance of your print failing is greatly reduced.

The printer is equipped with a camera, which allows you to monitor the progress of your print from a distance. It is also possible to set the Adventurer 5M Pro to turn itself off after the print is finished. The printer makes little noise and has a maximum noise level of only 50 dB.

The printer has a 4.3-inch touchscreen with a user-friendly UI, so you can easily control the printer. Connect the printer to the FlashPrint slicing software to prepare your model for printing. With FlashCloud it is also possible to control your printer remotely.

Different materials
The direct extruder and nozzle are easy to detach. The printing temperature can reach up to 280°C. This allows many different materials to be printed, such as PLA, ABS, PETG, PL-CF and PETG-CF. This opens up a world of possibilities for your 3D prints.

A consistent, professional quality
This Flashforge printer delivers professional quality in many areas. For example, it is built with a sturdy, all-metal frame. The air purification system has double air filters for even better filtering, and the print chamber is also actively cooled. Finally, the vibration-canceling technology ensures smooth prints.

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	453 x 380 x 400 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Power rating:	350 W	Max print volume:	10.648
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	280 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00211
Has CNC option:	no	Weight:	14.6 kg
Filament sensor:	yes

€499.50 (Incl. 23% VAT)
(€406.10 Excl. 23% VAT)

EU warehouse

Anycubic Kobra 3 Max 3D printer

Zoom in

1
0

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420mm x 420mm x 500mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600mm/s and an acceleration of 10,000mm/s², you never have to wait long for your 3D prints to be ready.

User friendly
The LeviQ 3.0 automatic leveling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolour 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can continue your 3D print after a power failure, so it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60˚C. The hotend can heat up to a temperature of 300˚C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	90 °C
Dimensions:	753 x 706 x 640 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print height:	50 cm
Nozzle diameter:	0.4 mm	Max print volume:	88.2
Power rating:	300 W	Max print width:	42 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	no	Our item no:	DKI00315
Has CNC option:	no	Variant:	Without ACE Pro
Filament sensor:	yes	Weight:	19 kg
Heated bed included:	yes

€529.50 (Incl. 23% VAT)
(€430.49 Excl. 23% VAT)

EU warehouse

Elegoo Saturn 4 Ultra 16K 3D printer

Zoom in

2
1
0

Description Create stunning 3D prints with the plug-and-play Saturn 4 Ultra 16K 3D printer from Elegoo. Thanks to the 16K resolution, details are sharper than ever before. This printer has a build volume of 211.68mm x 118.37mm x 220mm, a resolution of 15120 x 6230 and a 14 x 19 µm XY resolution. With a printing speed of 150mm/h, 3D prints are quickly brought to life.

Handy & smart
The smart heating system heats the resin tank to 30˚C. This results in better layer adhesion and fluidity, which increases the quality of 3D prints. Thanks to the automatic bed levelling, the Saturn 4 Ultra is even easier to use. In addition, the 10 inch 16K Mono LCD screen offers unprecedented precision and an excellent level of detail. This means that even complicated models are printed perfectly. The screen has a robust 9H tempered glass protector, which protects it from scratches and damage. To prevent damage to the LCD screen, this 3D printer uses a smart mechanical sensor with residue detection. The sensor also gives a notification when there is a shortage of resin and when the bed is not level, so that incorrect 3D prints are prevented.

User friendly
The quick release design makes it easy to remove and replace parts. Replaceable retaining screws ensure a clog-free design, and dual pouring troughs make it even easier to pour resin from the tank. Use the reliable draining rack to work cleanly and safely. Switch between fast and slow print modes in an instant to match your printing speed to your needs.

Easily monitor the printing process in real time with the improved camera. The built-in light makes it possible to monitor your 3D print during the day and in the evening or to make time-lapse videos. In addition, a notification is given when the print deforms or when the build plate is empty. The exposure time of the different sections can be set separately, so that the optimal settings can be found, and PFA release film does not stick.

Safety
For added safety, the 3D printer automatically pauses and alerts when the LED temperature exceeds 80˚C. It is also possible to resume 3D printing after a power failure and the Saturn 4 Ultra can perform a quick self-test to ensure everything is working properly.

Other functionalities
It is possible to control multiple 3D printers, which makes workflows even more streamlined. Thanks to the laser-engraved build plate, there is a strong bed adhesion, which makes 3D prints less likely to deform or detach. However, 3D prints can be easily removed when they are finished.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Specifications

Brand:	Elegoo	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Network:	WiFi	Max print depth:	11.83 cm
Dimensions:	54.8 x 32.74 x 32.92 cm	Max print height:	22 cm
Input voltage:	100-240V	Max print volume:	5.507
Light source:	UV LCD	Max print width:	21.16 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00322
Has CNC option:	no	Variant:	Saturn 4 Ultra 16K
Filament sensor:	no	Wavelength:	405 nm
Heated bed included:	no	Weight:	16.1 kg

€529.50 (Incl. 23% VAT)
(€430.49 Excl. 23% VAT)

EU warehouse

Anycubic Photon Mono M5 (12K) 3D printer

Zoom in

Description With the Anycubic Photon Mono M5 resin printer you can create models with razor-fine details. The 10.1-inch 12K monochrome LCD screen has a resolution of 11520 x 5120 and an XY pixel size of 19 x 24 µm. This way, even the smallest details are captured. The construction volume of 200mm x 218mm x 123mm offers enough space to give free rein to your creativity.

Professional and stable printing
The Photon Mono M5 provides a better printing experience thanks to the laser-engraved build plate. This means the print stays in place better and the chance of the model coming loose during printing is much smaller. The print will also deform less quickly. The z-axis dual linear rails and a POM nut provide highly precise z-axis movements without shaking. This way, the low noise is effectively reduced and details will be clearly visible.

Anycubic app and slicer
Easily use the printer together with the Anycubic app, which allows you to monitor your printing process. The Anycubic Photon Workshop 3.1 has a simplified UI that makes slicing easier. To increase the chance of success of your print, you can use the 'model repairing' function. The new support algorithm improves the stability of your prints, prevents damage to your model and makes it easier to remove supports.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	460 x 290 x 270 mm	Max print depth:	12.3 cm
Input voltage:	110-240V	Max print height:	20 cm
Light source:	UV LED	Max print volume:	5.363
Power rating:	100 W	Max print width:	21.8 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00190
Has CNC option:	no	Weight:	8.6 kg
Filament sensor:	no

€367.00 (Incl. 23% VAT)
(€298.37 Excl. 23% VAT)

EU warehouse

Anycubic Photon Mono M5s 3D printer

Zoom in

Description The Anycubic Photon Mono M5s resin printer is efficient, smart and easy to use. The Photon Mono M5s has a build volume of 200mm x 218mm x 123mm and can achieve an average print speed of up to 105mm per hour. The high-speed film reduces the chance of failed prints. The Photon Mono M5s' monochrome 10.1-inch 12K LCD screen has a resolution of 11520 x 5120 and an XY pixel size of 19 x 24µm. Ideal for printing hair-fine details.

No levelling
This is a levelling-free resin printer, which distinguishes it from other resin printers. A mechanical sensor detects the distance between the build plate and the levelling module. This then adjusts the distance based on the detected results. This means there are no more problems with levelling and your print has a higher chance of success.

Choose convenience
The automatic check quickly detects and resolves various hardware problems, so you can print with peace of mind and without problems. The resin detection indicates when there is insufficient resin in the printer for the model you want to print. This prevents failed prints due to a shortage of resin. The print status function gives you reminders for common errors. This way you save time and resin. This function can also analyse why a print failed and provide effective suggestions to prevent this.

Anycubic app and slicer
Easily use the printer together with the Anycubic app, which allows you to keep an eye on your printing process. The Anycubic Photon Workshop 3.1 has an 'intelligent mode' that reduces the risk of failed prints by looking at different parameters. The new support algorithm improves the stability of your prints, prevents damage to your model and makes it easier to remove supports.

Specifications

Brand:	Anycubic	Filament sensor:	no
UV wavelength:	405 nm	Heated bed included:	no
Network:	WiFi	Has laser option:	no
Dimensions:	460 x 290 x 270 mm	Printer has USB:	yes
Input voltage:	110-240V	Max print depth:	12.3 cm
Max. Light Intensity:	4.5	Max print height:	20 cm
Light source:	UV LED	Max print volume:	5.363
Power rating:	100 W	Max print width:	21.8 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00191
Has CNC option:	no	Weight:	8.9 kg

€399.00 (Incl. 23% VAT)
(€324.39 Excl. 23% VAT)

EU warehouse

Anycubic Photon Mono M5s Pro 3D printer

Zoom in

2
1
0

Description The Anycubic Photon Mono M5s Pro 3D printer is a pioneer among resin 3D printers with a stunning 10.1 inch 14K LCD screen. The screen has a resolution of 13312 x 5120 and an xy resolution of 16.8 x 24.8 µm. This allows you to see the smallest details and sharp edges in your printed model. This 3D printer has an average printing speed of 105mm/s, allowing you to produce a new 3D print very quickly. The Photon Mono M5s Pro has a high-speed ACF film with reduced peel force, giving you a higher chance of successful 3D printing.

Heat & filter module
This 3D printer is equipped with a module that heats the air and filters the air. This module can heat the air to a maximum of 40°C and keep the resin temperature above 20°C. This means you can produce high-quality prints even in a cold environment. The air filter has a carbon filter that effectively absorbs unpleasant odours released when printing with resin. This gives you a comfortable printing environment.

Smart, simple and efficient
The Photon Mono M5s Pro can detect remnants of a previous print and provide an error, so you can clean your tank before starting a new print. In addition, this 3D printer can perform a self-check, which detects whether there are hardware problems. The resin level is also monitored, so you can be sure that there is enough resin in your tank to make your 3D print.

Other functionalities
This 3D printer uses a completely new solution that makes leveling unnecessary. The platform and internal sensors will automatically make the necessary adjustments to ensure that the 3D print is uniform. Take advantage of the new version of the Anycubic app (Android & iOS), where you can find a large number of popular 3D prints that you can make.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	460 x 290 x 270 mm	Max print depth:	12.6 cm
Input voltage:	110-240V	Max print height:	20 cm
Light source:	UV LED	Max print volume:	5.619
Power rating:	110 W	Max print width:	22.3 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00248
Has CNC option:	no	Weight:	9.4 kg
Filament sensor:	no

€459.50 (Incl. 23% VAT)
(€373.58 Excl. 23% VAT)

EU warehouse

Anycubic Photon Mono 4 3D printer

Zoom in

Description Bring your creative ideas to life with the Mono 4 resin 3D printer from Anycubic. The 3D printer has a build volume of 154.4mm x 87.04mm, 165mm and has a maximum print speed of 72mm/h when printing with high speed resin.

Sharp details
The 7 inch 10K monochrome screen has 9024 x 5120 px and comes with a replaceable protective film that is larger than the screen, which prevents resin from leaking onto the screen. You can use the screen for up to 2000 hours. This allows you to make 3D prints with sharp details for a long time. This 3D printer comes with a parallel matrix light source and a touch screen.

Other functionalities
The lid effectively blocks UV radiation, so the resin remains liquid. The aluminum alloy build plate is laser engraved for improved adhesion. This means your 3D prints will not come loose during printing. You can easily send files to the Anycubic Mono 4 with a USB stick via the USB Type-A 2.0 port.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	391 x 235 x 230 mm	Max print depth:	15.34 cm
Input voltage:	110-220V	Max print height:	16.5 cm
Light source:	UV LED	Max print volume:	2.2
Power rating:	54 W	Max print width:	8.704 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00291
Has CNC option:	no	Weight:	4 kg
Filament sensor:	no

€169.50 (Incl. 23% VAT)
(€137.80 Excl. 23% VAT)

EU warehouse

Anycubic Photon Mono 4 Ultra 3D printer Pre-Order

Anycubic3D Anycubic Photon Mono 4 Ultra 3D printer ANY-PM4UBK0A-O DKI00309

Zoom in

1
0

Description Pre-Order: This item is expected in June.

The Anycubic Photon Mono 4 Ultra has a 7 inch 10K display with a pixel size of 17 x 17 µm and a resolution of 9024 x 5120. This allows you to easily bring your creative ideas to life and capture every detail. The 4.3 inch HD touchscreen has a completely new UI design for an extra user-friendly and comfortable design.

Smart system
The smart support system helps you create perfect 3D prints and saves you up to 40% of the original printing time. In addition, the Photon Mono Ultra detects whether there is resin left behind so that you can clean it and the screen does not get damaged. The printer also keeps track of how much resin is left and gives a notification when it is too little. Printing is automatically stopped when a 3D print fails and you will receive a notification for other printing problems, such as cracks and detachment from the print bed.

Other functionalities
The Anycubic Photon is equipped with a new generation of ACF film, which has a positive effect on print time and release height. When this film has printed almost 30,000 layers, you will receive a notification to replace the film. This way you are always assured of the best quality. The advanced COB light source and Fresnel Lens provide precise 3˚ purple light, with which you can achieve an accuracy of approximately 0.01 - 0.05 mm. In combination with high speed resin, a speed of 120 mm can even be achieved. Use the Anycubic app ( iOS & Android ) to easily send print jobs via the cloud.

Please note : LCD screens have a limited warranty. If you have any problems, check the warranty period.

*Please note that all pre-order delivery dates are subject to change without warning.
You can cancel your order for a full refund at any time prior to delivery.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	430 x 236 x 231 mm	Max print depth:	15.34 cm
Input voltage:	110-220V	Max print height:	16.5 cm
Light source:	UV LED	Max print volume:	2.2
Power rating:	72 W	Max print width:	8.704 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00309
Has CNC option:	no	Weight:	5 kg
Filament sensor:	no

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€235.50 (Incl. 23% VAT)
(€191.46 Excl. 23% VAT)

EU warehouse

Elegoo Mars 3 3D Printer

Zoom in

Description The Elegoo Mars 3D printer offers 30% more printing accuracy than its predecessor. The printer also has a larger print surface of no less than 143mm x 89mm x 175mm and the printer has a 50% higher heat dissipation efficiency. This is located on the underside of the printer so that the printer maintains an optimum print temperature.

The printer is equipped with a monochrome LCD screen with 4K resolution. The FEP films help to improve the printing results and the linear rails ensure that the printer does not cause too much noise during printing. The Mars 3 is equipped with a sandblastedbuild plate, which helps the prints adhere better to the surface.

Specifications

Brand:	Elegoo	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Network:	no	Max print depth:	14.3 cm
Dimensions:	43.85 x 22.7 x 22.7 cm	Max print height:	17.5 cm
Input voltage:	100-240V	Max print volume:	2.227
Max. Light Intensity:	4	Max print width:	8.9 cm
Light source:	UV LCD	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00072
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	5.2 kg
Filament sensor:	no

Extra information

3D Filament
Print bed accessories
Cleaning items
Instructional video

€246.00 (Incl. 23% VAT)
(€200.00 Excl. 23% VAT)

EU warehouse

Kywoo 3D Tycoon Slim 3D Printer

Zoom in

Description The Kywoo 3D Tycoon Slim 3D Printer is a compact Cartesian FDM printer with a maximum build volume of 240mm x 240mm x 300mm. Using a direct drive extruder increases the consistency of the extrusion. The use of Linear rails in dual configuration increases stability and the printer is equipped with a belt tensioner to control the tension on the drive belts. Bed calibration is easy via a factory-built autolevel kit and the printer can be controlled via a 3.5-inch HD colour touchscreen. The interface can be set in five different languages (EN-FR-GE-SP-IT).

In the event of a power loss, the Tycoon Slim has a built-in resume function. This significantly reduces the chance of failed prints.

Specifications

Brand:	Kywoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	no
Network:	no	Heatbed max temp:	110 °C
Dimensions:	522 x 464 x 552 mm	Max print depth:	24 cm
Input voltage:	115-230V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	17.28
Printer bed levelling:	automatic	Max print width:	24 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00128
Has CNC option:	no	Weight:	9 kg
Filament sensor:	yes	XY precision:	0.1 mm
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€337.00 30% discount:

€235.90 (Incl. 23% VAT)
(€191.79 Excl. 23% VAT)

EU warehouse

Elegoo Saturn 2 3D printer

Zoom in

Description The Elegoo Saturn 2 is an 8K SLA 3D printer with a large build volume. The printer has a resolution of 7680 x 4320 and a pixel size of 28 micrometres. Thanks to a newly developed light source & mirror, the Saturn 2 is able to print with great precision.

For better Z-axis stability, the printer is equipped with double linear sliders over which the build plate moves by means of a lead screw. The film is tempered, which increases the life of the screen and there is a material peel detection.

Specifications

Brand:	Elegoo	Filament sensor:	no
UV wavelength:	405 nm	Heated bed included:	no
Network:	no	Has laser option:	no
Dimensions:	56.7 x 30.6 x 27.3 cm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	12.31 cm
Max. Light Intensity:	3.8	Max print height:	25 cm
Light source:	UV LCD	Max print volume:	6.733
Power rating:	96 W	Max print width:	21.88 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00121
Has CNC option:	no	Weight:	11 kg

€457.00 (Incl. 23% VAT)
(€371.54 Excl. 23% VAT)

EU warehouse

Kywoo 3D Tycoon Max 3D Printer

Zoom in

Description The Kywoo Tycoon Max 3D printer is a Cartesian FDM 3D printer. The printer is the enlarged version of the Kywoo Tycoon and has a maximum build volume of 300mm x 300mm x 230mm. The print head is equipped with a direct drive kit and autolevel is built in from the factory. A handy feature of the Tycoon Max is that files are easily transferred through a WiFi connection.

Thanks to the filament runout sensor and the print resume function, the risk of a failed print is significantly reduced. The printer is easy to control via a 3.5-inch HD colour screen. The ergonomic interface can set the printer to five different languages (EN-FR-DE-SP-IT).

Specifications

Brand:	Kywoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	no
Network:	WiFi	Heatbed max temp:	110 °C
Dimensions:	475 x 485 x 525 mm	Max print depth:	30 cm
Input voltage:	115-230V	Max print height:	32 cm
Nozzle diameter:	0.4 mm	Max print volume:	28.8
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00127
Has CNC option:	no	Weight:	12.3 kg
Filament sensor:	yes	XY precision:	0.1 mm
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€487.00 30% discount:

€340.90 (Incl. 23% VAT)
(€277.15 Excl. 23% VAT)

EU warehouse

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

All 3D printers

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

All 3D printers