Home
3D resin

3D resin

Order SLA resin for an affordable price. SLA resin is resin that is used by resin printers and can be divided into different curing methods. In our range you will find daylight resin, resin for DLP printers, resin for printers with laser, and washable resin. You can also buy resin from us from brands such as BASF and Wanhao. In addition, our range includes FEP films and curing chambers.

121 - 144 of 170

BASF Ultracur3D RG 50 transparent resin, 5kg

Zoom in

Description BASF Ultracur3D RG 50 is a resin suitable for making prints with a high level of detail. In the curing process, RG 50 has a significantly smaller shrinkage factor. This is especially useful when a print has thin shapes or needs to fall within narrow margins. Also, the small shrink factor ensures that there is less loss of detail with miniatures.

Specifications

Amount:	5 kg	Hardness:	85D
Brand:	BASF	Our item no:	DLQ04033
Colour:	transparent	Resin specialty:	Standard
UV wavelength:	405 nm	Resin tensile strength:	-
Download SDS:	Download	Water washable:	no
Download TDS:	Download (PDF)

This product has an adjusted delivery time.

€427.00

€347.15 Excl. 23% VAT

EU warehouse

BASF Ultracur3D RG 1100 neutral resin, 5kg

Zoom in

Description BASF Ultracur3D RG 1100 is a neutral resin perfect for prints that are under a lot of stress for a long time. RG 1100 has the same material properties as molded plastic and repels heat and UV radiation extra well. This allows you to print more complex shapes. These could be D&D or Warhammer models, for example. However, RG 1100 is so strong that you can even print the propeller of model airplanes.

Specifications

Amount:	5 kg	Hardness:	85D
Brand:	BASF	Our item no:	DLQ04050
Colour:	neutral	Resin specialty:	Standard
UV wavelength:	385-405 nm	Resin tensile strength:	-
Download SDS:	Download	Water washable:	no
Download TDS:	Download (PDF)

€575.00

€467.48 Excl. 23% VAT

EU warehouse

BASF Ultracur3D DM 2505 beige resin, 1kg

Zoom in

Description BASF Ultracure3D DM2505 is a beige coloured hard polymer resin suitable for high detail prints. The material requires reduced finishing and can be easily cleaned with water instead of special cleaning agents. BASF Ultracur3D DM2505 has a shore durometer hardness rating of 73D. This makes the material ideal for products that are otherwise made of high-quality polyethylene (HDPE). Examples of this are moulds and housings for small electronics, but is also very suitable for figurines or action figures from D&D and Warhammer.

Specifications

Amount:	1 kg	Hardness:	73D
Brand:	BASF	Our item no:	DLQ04000
Colour:	beige	Resin specialty:	Standard
UV wavelength:	385-405 nm	Resin tensile strength:	-
Download SDS:	Download	Water washable:	no
Download TDS:	Download (PDF)

€99.50

€80.89 Excl. 23% VAT

EU warehouse

BASF Ultracur3D DM 2505 beige resin, 5kg

Zoom in

Description BASF Ultracure3D DM2505 is a beige coloured hard polymer resin suitable for high detail prints. The material requires reduced finishing and can be easily cleaned with water instead of special cleaning agents. BASF Ultracur3D DM2505 has a shore hardness rating of 73D. This makes the material ideal for products that are otherwise made of high-quality polyethylene (HDPE). Examples of this are moulds and housings for small electronics, but it's also very suitable for figurines or action figures for D&D and Warhammer.

Specifications

Amount:	5 kg	Hardness:	73D
Brand:	BASF	Our item no:	DLQ04001
Colour:	beige	Resin specialty:	Standard
UV wavelength:	385-405 nm	Resin tensile strength:	-
Download SDS:	Download	Water washable:	no
Download TDS:	Download (PDF)

This product has an adjusted delivery time.

€527.00

€428.46 Excl. 23% VAT

EU warehouse

Wanhao transparent UV resin, 500ml

Zoom in

Description This transparent Wanhao UV resin is suitable for various SLA 3D printers. The curing wavelength is 405nm. It is suitable for UV LCD, UV DLP and UV laser SLA 3D printers.

The exposure time per layer depends on the exposure source and will vary between 8 and 16 seconds. The resin comes in a resealable bottle.

Always read the instructions and safety information before use.

Specifications

Amount:	0.5 kg	Safety datasheet:	Safety Information
Brand:	Wanhao	Our item no:	DLQ02011
Colour:	transparent	Resin specialty:	Standard
UV wavelength:	405 nm	Resin type:	UV
Download SDS:	Download	Water washable:	no

€35.50

€28.86 Excl. 23% VAT

EU warehouse

Wanhao red UV resin, 250ml

Zoom in

Description This red Wanhao UV resin is suitable for various SLA 3D printers. The curing wavelength is 405nm. It is suitable for UV LCD, UV DLP and UV laser SLA 3D printers.

The exposure time per layer depends on the exposure source and will vary between 8 and 16 seconds. The resin comes in a resealable bottle.

Always read the instructions and safety information before use.

Specifications

Amount:	0.25 kg	Safety datasheet:	Safety Information
Brand:	Wanhao	Our item no:	DLQ02006
Colour:	red	Resin specialty:	Standard
UV wavelength:	405 nm	Resin type:	UV
Density:	1.1	Volume:	250 ml
Download SDS:	Download	Water washable:	no

€20.50

€16.67 Excl. 23% VAT

EU warehouse

Wanhao orange UV resin, 250ml

Zoom in

Description This orange Wanhao UV resin is suitable for various SLA 3D printers. The curing wavelength is 405nm. It is suitable for UV LCD, UV DLP and UV laser SLA 3D printers.

The exposure time per layer depends on the exposure source and will vary between 8 and 16 seconds. The resin comes in a resealable bottle.

Always read the instructions and safety information before use.

Specifications

Amount:	0.25 kg	Safety datasheet:	Safety Information
Brand:	Wanhao	Our item no:	DLQ02000
Colour:	orange	Resin specialty:	Standard
UV wavelength:	405 nm	Resin type:	UV
Density:	1.1	Volume:	250 ml
Download SDS:	Download	Water washable:	no

€20.50

€16.67 Excl. 23% VAT

EU warehouse

Wanhao orange UV resin, 500ml

Zoom in

Specifications

Amount:	0.5 kg	Safety datasheet:	Safety Information
Brand:	Wanhao	Our item no:	DLQ02008
Colour:	orange	Resin specialty:	Standard
UV wavelength:	405 nm	Resin type:	UV
Density:	1.1	Volume:	500 ml
Download SDS:	Download	Water washable:	no

€35.50

€28.86 Excl. 23% VAT

EU warehouse

Photocentric grey UV-DLP high tensile resin, 1kg

Zoom in

Description This high tensile UV polymer has been developed to achieve a very high tensile strength. It cures very quickly and has a low shrinkage factor. Objects made of this type of resin can handle a very high tensile force. The material can be rinsed with water and comes in a bottle with a non-drip cap.

This type of resin has been specially developed for printers that use a DLP/beamer for exposure.

Hardness	⋆⋆ ⋆⋆⋆
Flexibility	⋆ ⋆⋆⋆⋆

Always read the instructions and safety information before use.

Data Sheet (PDF)
Important Safety Information (PDF)

Specifications

Amount:	1 kg	Hardness:	80D
Brand:	Photocentric	Our item no:	DLQ00024
Colour:	grey	Resin specialty:	High tensile strength
UV wavelength:	385-405 nm	Resin type:	UV DLP
Download SDS:	Download	Water washable:	no
Download TDS:	Download

€87.50

€71.14 Excl. 23% VAT

EU warehouse

Photocentric HD black UV resin, 1kg

Zoom in

Description Photocentrics black HD UV resin enables the production of highly precise prints. It is gentle on the skin and emits minimal odour, facilitating its application across diverse projects. Once printed, your 3D models exhibit the same strength as conventional plastic models. Compatible with a range of UV LCD and DLP 3D printers, this resin offers versatility in manufacturing.

Specifications

Amount:	1 kg	Download TDS:	Download
Brand:	Photocentric	Hardness:	75D
Colour:	black	Our item no:	DAR01366
UV wavelength:	385-405 nm	Resin type:	UV LCD DLP
Download SDS:	Download	Water washable:	no

€43.95

€35.73 Excl. 23% VAT

EU warehouse

Photocentric black UV-LCD hard resin, 1kg

Zoom in

Description Bring your designs to life in no time with this PhotoCentric UV-LCD hard 3D resin in black.

This ultra-strong UV polymer has been specially developed for UV-LCD printers and is ideal for printing objects that require a lot of force. This high-quality 3D resin cures very quickly without shrinking and does not deform even under extreme conditions. Both large and small objects made of this type of resin are extremely strong, but not flexible.

Are you ready with your 3D print? Remove the sticky layer that remains with soap and water and let your design cure for at least 20 minutes in a container with water and UV light. Remove the 3D print from the water and allow your 3D design to cure for at least another hour under direct UV light. The remaining resin can be reused, but must first be filtered to remove hard pieces.

Always store this strong and durable material in a dry and dark place without exposure to UV light to ensure durability and quality. This way your 3D resin creations will always be of top quality!

Hardness	⋆⋆⋆⋆⋆
Flexibility	⋆⋆⋆⋆⋆

Specifications

Amount:	1 kg	Safety datasheet:	Safety Information
Brand:	Photocentric	Hardness:	80D
Colour:	black	Our item no:	DLQ00044
UV wavelength:	385-405 nm	Resin specialty:	Hard
Download SDS:	Download	Resin type:	UV LCD
Download TDS:	Download	Water washable:	no

€82.50

€67.07 Excl. 23% VAT

EU warehouse

Photocentric black UV-DLP UV80 resin, 1kg

Zoom in

Description The UV resin DLP UV80 resin from Photocentric is a versatile material. It can withstand shock, compression and bending without breaking or deforming. This Photocentric resin is widely used for cover plates, housings, fasteners, tools and couplings. It has a smooth surface finish and is known for its strength and durability. This resin is black.

Specifications

Amount:	1 kg	Hardness:	84D
Brand:	Photocentric	Our item no:	DAR00788
Colour:	black	Resin specialty:	Standard
UV wavelength:	385-405 nm	Resin type:	UV DLP
Download SDS:	Download	Water washable:	no
Download TDS:	Download

€152.50

€123.98 Excl. 23% VAT

EU warehouse

Photocentric black UV-DLP hard resin, 1kg

Zoom in

Description This hard UV resin polymer is ideal for making very hard objects. It cures very quickly and has a low shrinkage factor. Objects made from this type of resin will not bend or warp when force is applied to them. The material can be rinsed with water and comes in a bottle with a non-drip cap.
This type of resin has been specially developed for SLA printers that use a DLP for exposure.

Hardness	⋆⋆⋆⋆⋆
Flexibility	⋆⋆⋆⋆⋆

Always read the instructions and safety information before use.

Data Sheet (PDF)
Important Safety Information (PDF)

Specifications

Amount:	1 kg	Hardness:	80D
Brand:	Photocentric	Our item no:	DLQ00013
Colour:	black	Resin specialty:	Hard
UV wavelength:	385-405 nm	Resin type:	UV DLP
Download SDS:	Download	Water washable:	no
Download TDS:	Download

€89.50

€72.76 Excl. 23% VAT

EU warehouse

Zortrax Inkspire white/ivory BASIC resin

Zoom in

Description Zortrax white BASIC resin is an ivory/white Epoxy based resin specially formulated for prints that have a high level of detail or sharp edges. Zortrax BASIC offers a soft texture and can be cured using UV Light. Thanks to its chemical composition, Zortrax resin BASIC has a significantly smaller shrinkage after printing. This makes it ideal for small models such as mini figures from D&D or Warhammer, among others.

Specifications

Amount:	0.5 kg	Our item no:	DFP00170
Brand:	Zortrax	Resin specialty:	Standard
Colour:	white	Volume:	500 ml
UV wavelength:	405 nm	Water washable:	no
Download SDS:	Download

€75.50

€61.38 Excl. 23% VAT

EU warehouse

3DMaterials SuperFast 8K Gray 3D Printer Resin, 5kg

Zoom in

Description SuperFast is an advanced high speed resin engineered for creators who demand rapid curing exceptional detail and long print reliability. With extremely low viscosity and next generation photosensitisation technology it delivers ultra fast layer times clean surface quality and stable performance even during long continuous prints. SuperFast is ideal for high volume printing farms professional prototyping and makers who want maximum speed without sacrificing precision.

Fast Printing with 0.5 Second Layer Cure
SuperFast uses a unique photosensitisation system developed by 3DMaterials that cures a 50 micron layer in only 0.5 seconds on monochrome LCD printers. This dramatically reduces print times and enables true high speed production.

Save Time and Electricity
The ultra fast curing speed reduces overall print duration and lowers energy consumption. This improves workflow efficiency and increases the productivity of any 3D printing setup from home studios to large print farms.

Low Viscosity for Precision 8K Printing
Optimised for 4K and 8K LCD systems SuperFast flows smoothly and levels instantly. Its very low viscosity supports extremely high resolution printing with crisp details down to 22 microns even at high speeds.

Minimized Burr Formation for Long Prints
SuperFast prints faster than even SuperFast 018L while being less sensitive to stray LCD light. This prevents burrs thin films and unwanted cured residue even during continuous prints lasting up to 50 hours.

Water Washable for Easy Cleanup
Based on revolutionary water washable oligomer technology SuperFast allows printed parts build platforms and resin tanks to be cleaned easily using warm tap water and soap. No harsh chemicals are required.

Compatible with All LCD 3D Printers
Thanks to its advanced photosensitization chemistry SuperFast works with all regular and monochrome LCD printers including 4K and 8K models. No special settings or hardware modifications are needed.

Low Shrinkage with Added Toughness
SuperFast is formulated using low shrinkage oligomers synthesised in house along with monomers that enhance toughness. This results in dimensionally stable prints that resist cracking and deformation.

Specifications

Amount:	5 kg	Colour:	grey
Brand:	3DMaterials	Our item no:	DLQ06080

€155.00

€126.02 Excl. 23% VAT

EU warehouse

3DMaterials SuperPCS Toughest 1.8Gpa Fast Gray 3D Printer Resin, 1kg

Zoom in

Description SuperPCS is a high performance engineering resin designed for creators who need exceptional stiffness durability and ultra fine detail. With high modulus values reliable elongation and extremely low viscosity it is ideal for precision prototypes mechanical components and high resolution 8K printing. SuperPCS delivers the perfect balance of strength accuracy and speed for demanding engineering applications.

High Modulus with High Elongation at Break
SuperPCS provides a tensile modulus of 1.8GPa and a flexural modulus of 2.8GPa combined with 15 percent elongation at break. This rare combination of stiffness and flexibility makes it suitable for functional parts that must withstand stress without cracking.

Fast Printing with 1.5 Second Layer Cure
Thanks to advanced photosensitisation technology developed by 3DMaterials SuperPCS cures a 50 micron layer in only 1.5 seconds on monochrome LCD printers. This significantly reduces print times and supports high throughput production.

Save Time and Electricity
The rapid curing speed reduces overall print duration and lowers energy consumption. This increases productivity for both individual users and large 3D printing farms.

Low Viscosity for Precision 8K Printing
Optimised for 4K and 8K LCD systems SuperPCS has very low viscosity which supports extremely high resolution printing down to 22 microns. This ensures crisp details smooth surfaces and excellent dimensional accuracy even at high speeds.

Tough and Durable Engineering Performance
SuperPCS is formulated using revolutionary oligomers synthesised by 3DMaterials. This allows printed parts to achieve stiffness and durability at the same time making it ideal for functional prototypes and end use components.

Compatible with All LCD 3D Printers
SuperPCS works with all regular and monochrome LCD printers including 4K and 8K systems. No special hardware or modifications are required.

Ideal Applications
SuperPCS is perfect for printing
• precision engineering components
• functional prototypes
• snap fit parts
• brackets and fixtures
• high resolution mechanical parts
• durable consumer product models

Its combination of stiffness toughness and ultra fine detail makes it suitable for both industrial and design applications.

Specifications

Amount:	1 kg	Colour:	grey
Brand:	3DMaterials	Our item no:	DLQ06105

€42.00

€34.15 Excl. 23% VAT

EU warehouse

3DMaterials SuperPCS Toughest 1.8Gpa Fast Gray 3D Printer Resin, 5kg

Zoom in

Specifications

Amount:	5 kg	Colour:	grey
Brand:	3DMaterials	Our item no:	DLQ06108

€198.00

€160.98 Excl. 23% VAT

EU warehouse

3DMaterials SuperFast 8K Black 3D Printer Resin, 5kg

Zoom in

Specifications

Amount:	5 kg	Colour:	black
Brand:	3DMaterials	Our item no:	DLQ06081

€155.00

€126.02 Excl. 23% VAT

EU warehouse

3DMaterials SuperPCS Toughest 1.8Gpa Fast Black 3D Printer Resin, 1kg

Zoom in

Specifications

Amount:	1 kg	Colour:	black
Brand:	3DMaterials	Our item no:	DLQ06107

€42.00

€34.15 Excl. 23% VAT

EU warehouse

3DMaterials SuperPCS Toughest 1.8Gpa Fast Black 3D Printer Resin, 5kg

Zoom in

Specifications

Amount:	5 kg	Colour:	black
Brand:	3DMaterials	Our item no:	DLQ06110

€198.00

€160.98 Excl. 23% VAT

EU warehouse

3DMaterials SuperFast 8K White 3D Printer Resin, 5kg

Zoom in

Specifications

Amount:	5 kg	Colour:	white
Brand:	3DMaterials	Our item no:	DLQ06083

€155.00

€126.02 Excl. 23% VAT

EU warehouse

3DMaterials SuperPCS Toughest 1.8Gpa Fast White 3D Printer Resin, 1kg

Zoom in

Specifications

Amount:	1 kg	Colour:	white
Brand:	3DMaterials	Our item no:	DLQ06106

€42.00

€34.15 Excl. 23% VAT

EU warehouse

3DMaterials SuperPCS Toughest 1.8Gpa Fast White 3D Printer Resin, 5kg

Zoom in

Specifications

Amount:	5 kg	Colour:	white
Brand:	3DMaterials	Our item no:	DLQ06109

€198.00

€160.98 Excl. 23% VAT

EU warehouse

3DMaterials SuperRigid 6.0GPa 40% Nano Ceramic White 3D Printer Resin, 0.5kg

Zoom in

Description SuperRigid is a high performance ceramic reinforced engineering resin designed for creators who need extremely stiff durable and dimensionally stable parts. With a high ceramic powder content and exceptional mechanical strength it is ideal for functional prototypes tooling components and applications that require the rigidity of industrial ceramics.

Forty Percent Nano Micro Ceramic Powder Filled
SuperRigid contains forty percent nano micro ceramic powder giving printed parts a strong ceramic like character. This reinforcement provides exceptional stiffness hardness and surface quality similar to ceramic filled thermoplastics used in industrial manufacturing.

High Modulus Ceramic Like Performance
SuperRigid delivers a tensile modulus of 6.0GPa and a flexural modulus of 8.0GPa simulating the rigidity of technical ceramics. This makes it suitable for demanding engineering applications where minimal flex and maximum structural stability are required.

Low Shrinkage for Dimensional Accuracy
Formulated with low shrinkage oligomers synthesised in house SuperRigid maintains excellent dimensional stability after post curing. This ensures accurate precise prints even for complex geometries and tight tolerance components.

ISO 10993 5 Tested After Post Cure
When properly processed and fully post cured SuperRigid passes ISO 10993 5 2009 testing providing confidence for applications where material safety and reliability are essential.

Compatible with All LCD 3D Printers
Thanks to advanced photosensitisation technology SuperRigid works with all regular and monochrome LCD printers including 4K and 8K systems. No special hardware or modifications are required.

Ideal Applications
SuperRigid is perfect for printing
• ultra stiff engineering components
• tooling fixtures and jigs
• precision housings and enclosures
• structural prototypes
• ceramic like functional parts
• components requiring minimal flex

Its combination of extreme rigidity ceramic reinforcement and dimensional stability makes it suitable for industrial engineering and high performance prototyping.

Specifications

Amount:	0.5 kg	Colour:	white
Brand:	3DMaterials	Our item no:	DLQ06100

€60.00

€48.78 Excl. 23% VAT

EU warehouse

Anycubic

BASF

Daylight resin

Elegoo

ESun

REAL

UV resin DLP

UV resin laser

Wanhao

Water washable

Zortrax

B-Choice Resin

FEP sheets

SLA build plates

Curing chambers

3D resin

Order cheap SLA resin online

In our range you will find a large number of different types of SLA resin. We offer resin for different curing methods, washable resin, various accessories for the printing process and brands of a number of specific brands.

Our SLA resin range

Different curing methods

There are various types of resin printers. Depending on which resin printer you have, a different curing method is used. That is why you will find the right resins for different curing methods in our range. For example, you can easily buy resin for printers that use an LCD with visible daylight, printers that use a UV light, or printers that use a resin laser.

Water washable resin

Water washable resin makes it possible to make supports for your prints that can then be easily dissolved in water. This makes it easy to print even complex SLA prints properly, with sufficient support.

Accessories for SLA resin
In our range you will find a wide range of accessories to use in combination with an SLA printer. Think of disposable gloves, FEP film, safety glasses and curing chambers. This way you can use your SLA printer in a safe and efficient way.

Common questions

What is SLA resin?

SLA resin is a resin used by SLA printers; printers that use a photochemical process to convert the liquid resin into a solid print. Depending on the resin and the printer, there are different photochemical processes, ranging from the use of a laser to a UV light.

How do I use SLA resin safely?

It is not wise to touch SLA resin in its liquid form with bare skin. In addition, certain substances and particles are released when working with SLA resin. These particles can cause harm if they are inhaled or come into contact with your eyes. It is therefore important to protect your hands and face when working with SLA resin and to work in a sufficiently ventilated area to minimise potential hazards.

Is SLA resin food safe?

No, SLA resin is not food safe. Resin particles may be released upon contact with foodstuffs. Even after treatment with a coating, it is not guaranteed that SLA resin is food safe. Do you want to print food-safe? Then it is convenient to print with PLA, PETG, PP or nylon. Note: A filament must indicate whether it is food safe.

Do you have questions about the information on this page? Or would you like to know more about our range of SLA resin? Contact us! We like to help.

Hide text...

Quantity	Product
No products
Total: €0.00 (Incl. 0% VAT)

3D resin

Anycubic

BASF

Daylight resin

Elegoo

ESun

REAL

UV resin DLP

UV resin laser

Wanhao

Water washable

Zortrax

B-Choice Resin

FEP sheets

SLA build plates

Curing chambers

3D resin

Order cheap SLA resin online

Our SLA resin range

What is SLA resin?

How do I use SLA resin safely?

Is SLA resin food safe?

Popular products