Bondtech

25 - 48 of 117

Bondtech DDX V3 Creality direct drive extruder

Description This extruder has a double drive and therefore delivers high-quality prints. The extruder is suitable for Creality 3D printers and is compatible with hotends of almost any Creality model, but can also be upgraded to a Copperhead or Mosquito hotend. With this extruder you have more options for materials, higher flow and wider nozzles and thinner layers to achieve a higher print quality.

Specifications

Brand:

Bondtech

Our item no:

DBO00054

€109.50

€89.02 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 CR-10 V2 & V3 mounting plate

Zoom in

Description The DDX V3 mounting plate is an easy to install spare part made from Nylon (PA12).

Compatible with the following printers:
	●	Creality 3D CR-10 V2	●	Creality 3D CR-10 V3

Specifications

Brand:	Bondtech	Material:	Nylon
Colour:	black	Our item no:	DBO00047

€26.00

€21.14 Excl. 23% VAT

EU warehouse

Bondtech LGX Shortcut Copperhead Printhead

Zoom in

Description

The Bondtech LGX Shortcut Copperhead printhead consists of a hotend and an extruder.

Hotend
With the hotend you can print all kinds of filaments at temperatures up to 450°C. With the LGX Shortcut Copperhead hotend (previous name: LGX For Flexibles Set) you can process all kinds of 1.75mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 27mm shorter than the standard Copperhead screw-on hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in various ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This pack contains:

Copperhead™ LGX™ Heatbreak
Copperhead™ Hot Block
Black anodized LGX™ aluminum cooling basin
Air-cooled black anodized LGX™ aluminum heat sink
Air-cooled LGX™ Cold Block mounting hardware
Bondtech M6x1x7.5 coated brass mouthpiece 0.4mm (V6)
Bag of silver-based thermal paste

The hotblock supplied with this product is compatible with the RepRap nozzle standard.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: The nozzle is not included.

Extruder
The LGX Large Gears eXtruder is Bondtech's first 1.75mm filament feeder with the new Dual Drive technology. This item is designed to be compact, lightweight and symmetrical for better performance and compatibility. You install and clean it easily. The filament preload lever ensures consistent results. Thanks to the larger drive gears, you have more grip on the filament.

The multifunctional interface connection allows you to quickly change tools or applications. The housing is professionally 3D printed with nylon, for maximum strength, precision and higher temperature resistance. In the context of sustainability, no bleaching agents and coatings have been used.

This extruder comes with:

LGX® input
Custom Nema17 25mm pancake stepper motor
Bowden interface plug (incl. threaded metal push-fit)
Direct Drive Interface Plug (for Slice Engineering hotends)
2mm Allen key
Information brochure

The supplied studs can be used to replace the stepper motor screws and as additional mounting points. They have an M3 thread with a depth of 4mm.

Specifications

Brand:	Bondtech	Our item no:	DBO00087
Filament diameter:	1.75 mm	Weight:	0.27 kg

€179.50

€145.93 Excl. 23% VAT

EU warehouse

Bondtech LGX Shortcut Copperhead Accessories For MK3S

Zoom in

Description These Bondtech LGX Shortcut Copperhead accessories fit the LGX Shortcut Copperhead Hotend and are suitable for the Prusa MK3S.

The accessory set contains:

LGX PA12 holder
LGX PA12 Peanut container
LGX PA12 fan cover
LGX PA12 filament sensor box
Mounting accessories
Stepper motor cable

Specifications

Brand:	Bondtech	Our item no:	DBO00092
Material:	Nylon PA12

€51.50

€41.87 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 PA12 fan shroud for CR-10(S) Pro & Max

Zoom in

Description The Bondtech DDX V3 PA12 fan shroud provides improved air distribution at the nozzle.

Compatible with the following printers:
	●	Creality 3D CR-10S Pro	●	Creality 3D CR-10S Pro V2
	●	Creality 3D CR-10 Max

Specifications

Brand:	Bondtech	Material:	Nylon
Colour:	black	Our item no:	DBO00046

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 PA12 fan shroud for Ender & CR-10(S)

Zoom in

Description The Bondtech DDX V3 PA12 fan shroud provides improved air distribution at the nozzle.

Compatible with the following printers:
	●	Ender-3	●	Ender-6
	●	Ender-3 v2	●	CR-10
	●	Ender-3 Pro	●	CR-10 Mini
	●	Ender-5	●	CR-10S
	●	Ender-5 Pro	●	CR-10 S4
	●	Ender-5 Plus	●	CR-10 S5

Specifications

Brand:	Bondtech	Material:	Nylon
Colour:	black	Our item no:	DBO00045

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech LGX Shortcut Copperhead Hotend

Zoom in

Description With the Bondtech LGX Shortcut Copperhead hotend you can print all kinds of filaments at temperatures of up to 450°C. This product is suitable for use with the LGX Extruder (not included). With the LGX Shortcut Copperhead hotend (former name: LGX For Flexibles Set) you can process all kinds of 1.75 mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 27mm shorter than the standard Copperhead screw-on hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in several ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This package contains:

a Copperhead™ LGX™ Heatbreak
a Copperhead™ Hot Block
a black anodized LGX™ aluminum cooling pool
an air-cooled black anodized LGX™ aluminum heat sink
an air-cooled LGX™ Cold Block mounting hardware
a Bondtech M6x1x7.5 coated brass nozzle 0.4 mm (V6)
a sachet of silver-based thermal paste

The heater block supplied with this product is compatible with the RepRap nozzle standard.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: the nozzle is not included.

Specifications

Brand:	Bondtech	Our item no:	DBO00086
Filament diameter:	1.75 mm	Weight:	0.056 kg

€79.50

€64.63 Excl. 23% VAT

EU warehouse

Bondtech LGX Shortcut Mosquito Printhead

Zoom in

Description

The Bondtech LGX Shortcut Mosquito printhead consists of a hotend and an extruder.

Hotend
With the Bondtech LGX Shortcut Mosquito hotend you can print all kinds of filaments at temperatures up to 450°C. With the LGX Shortcut Mosquito hotend you can process all kinds of 1.75mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 23mm shorter than the standard Mosquito hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in various ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This pack contains:

Mosquito Hotend (without Heatsink)
Black anodized LGX™ aluminum cooling basin
Air-cooled black anodized LGX™ aluminum heat sink
Air-cooled LGX™ Cold Block mounting hardware
Bondtech M6x1x7.5 coated brass mouthpiece 0.4 mm (V6)
Bag of silver-based thermal paste

The hotblock supplied with this product is compatible with the RepRap nozzle standard. You can change the nozzle with one hand.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: The nozzle is not included.

Extruder

The LGX Large Gears eXtruder is Bondtech's first 1.75mm filament feeder with the new Dual Drive technology. This item is designed to be compact, lightweight and symmetrical for better performance and compatibility. You install and clean it easily. The filament preload lever ensures consistent results. Thanks to the larger drive gears, you have more grip on the filament.

The multifunctional interface connection allows you to quickly change tools or applications. The housing is professionally 3D printed with nylon, for maximum strength, precision and higher temperature resistance. In the context of sustainability, no bleaching agents and coatings have been used.

This extruder comes with:

LGX® input
Custom Nema17 25mm pancake stepper motor
Bowden interface plug (incl. threaded metal push-fit)
Direct Drive Interface Plug (for Slice Engineering hotends)
2mm Allen key
Information brochure

The supplied studs can be used to replace the stepper motor screws and as additional mounting points. They have an M3 thread with a depth of 4mm.

Specifications

Brand:	Bondtech	Max temp:	450 °C
Filament diameter:	1.75 mm	Our item no:	DBO00089

€251.50

€204.47 Excl. 23% VAT

EU warehouse

Bondtech DDX V3 PH1 for Creality CR-10 (S) Pro & Max

Zoom in

Description Bondtech's DDX V3 PH1 replaces the original Bowden extruder with a direct drive extruder setup. The model is suitable for Creality 3D printers and is compatible with hot ends of almost every Creality model. You can also upgrade the hotend to Copperhead or Mosquito.

With this powerful 1.75mm Dual Drive extruder you achieve a higher print quality and you have more options, such as thinner layers, higher resolution prints with small nozzles, high flow prints with larger nozzles and a wider choice of materials.

Further highlights:

Effective hot end cooling
3:1 gear ratio
Housing parts made of polyamide (PA12) with SLS technology for maximum strength and precision

Please Note: A Bondtech DDX Adapter Kit is required to use this product.

Specifications

Brand:	Bondtech	Our item no:	DBO00050
Filament diameter:	1.75 mm

€147.50

€119.92 Excl. 23% VAT

EU warehouse

Bondtech LGX Shortcut X-carriage

Zoom in

Description You need this Bondtech LGX Shortcut X carriage to install the "Bondtech LGX Shortcut Copperhead for Prusa MK3S" and "Bondtech LGX Shortcut Mosquito for Prusa MK3S" upgrade kits. The X-carriage reduces the distance between the nozzle and the x-axis.

This part is professionally 3D printed with nylon for maximum strength, precision and higher temperature resistance. The operating temperature limit for the stepper motor is max. 70°C and the maximum operating temperature is 90°C. The X-carriage itself can withstand temperatures up to 100°C. For durability, this part is supplied unpainted. It has the natural colour of the material and a wax coating.

The LGX Shortcut X-carriage for MK3S(+) comes with:

SLS X-carriage front
SLS X-carriage rear
5 x M3 x 10 screws
5 x M3 square nut
1 x M3 nut
2 x 100mm black cable ties

Specifications

Brand:	Bondtech	Our item no:	DBO00090
Material:	Nylon

€39.50

€32.11 Excl. 23% VAT

EU warehouse

Bondtech drivegear kit, 1.75mm (5mm shaft)

Zoom in

Description The drivegear kit consists of 2 gears, bearings and a shaft. This set is suitable for 1.75mm filament and has a 5mm shaft.

By using a little bit of grease between the gears, the whole is more wear-resistant for a longer life.

Specifications

Brand:	Bondtech	Material:	Steel
Filament diameter:	1.75 mm	Our item no:	DBO00057

€31.50

€25.61 Excl. 23% VAT

EU warehouse

Bondtech LGX Shortcut Mosquito Accessories For MK3S

Zoom in

Description These Bondtech LGX Shortcut Mosquito Accessories fit the LGX Shortcut Mosquito Hotend and are suitable for the Prusa MK3S.

The accessory set contains:

LGX PA12 holder
LGX PA12 Peanut container
LGX PA12 fan cover
LGX PA12 filament sensor box
mounting accessories
stepper motor cable

Specifications

Brand:	Bondtech	Our item no:	DBO00091
Material:	Nylon PA12	Weight:	0.09 kg

€51.50

€41.87 Excl. 23% VAT

EU warehouse

Bondtech drivegear kit, 1.75mm (8mm shaft)

Zoom in

Description The drivegear kit consists of 2 gears, bearings and a shaft. This set is suitable for 1.75mm filament and has an 8mm shaft.

By using a little bit of grease between the gears, the whole is more wear-resistant for a longer life.

Specifications

Brand:	Bondtech	Material:	Steel
Filament diameter:	1.75 mm	Our item no:	DBO00055

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Bondtech drivegear kit, 2.85mm (8mm shaft)

Zoom in

Description The drivegear kit consists of 2 gears, bearings and a shaft. This set is suitable for 2.85mm filament and has an 8mm shaft.

By using a little bit of grease between the gears, the whole is more wear-resistant for a longer life.

Specifications

Brand:	Bondtech	Material:	Steel
Filament diameter:	2.85 mm	Our item no:	DBO00056

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Bondtech LGX Shortcut Mosquito Hotend

Zoom in

Description

With the Bondtech LGX Shortcut Mosquito hotend you can print all kinds of filaments at temperatures up to 450°C. This product is suitable for use with the LGX Extruder. With the LGX Shortcut Mosquito hotend you can process all kinds of 1.75mm filament quickly and easily, but especially the softer and flexible variants. The filament path is 23mm shorter than the standard Mosquito hotend. This hotend keeps the print head small and light.

The hotend is easy to assemble in various ways. The reversible cooling basin can be attached to the left or right side of the cooling block. The product is designed so that you can attach a 40mm x 40mm fan to it.

This pack contains:

a Mosquito Hotend (without Heatsink)
a black anodized LGX™ aluminum cooling basin
an air-cooled black anodized LGX™ aluminum heat sink
an air-cooled LGX™ Cold Block mounting hardware
a Bondtech M6x1x7.5 coated brass mouthpiece 0.4 mm (V6)
a bag of silver-based thermal paste

The hotblock supplied with this product is compatible with the RepRap nozzle standard. You can change the nozzle with one hand.

The hotend is compatible with the following nozzles:

Bondtech: brass and coated nozzles
Slice Engineering: copper and vanadium nozzles

Note: The nozzle is not included.

Specifications

Brand:	Bondtech	Our item no:	DBO00088
Filament diameter:	1.75 mm	Weight:	0.061 kg

€149.50

€121.54 Excl. 23% VAT

EU warehouse

Bondtech LGX® Lite Front Plate BeeHive

Zoom in

Description Spare part for the Bondtech LGX® Lite. Honeycomb pattern front plate made of grey polyamide without colouring. Features a protective wax coating and the LGX® Lite Bondtech sticker.

Specifications

Brand:	Bondtech	Our item no:	DBO00100
Dimensions:	20 x 50 x 100 mm	Weight:	0.02 kg

€7.75

€6.30 Excl. 23% VAT

EU warehouse

Bondtech LGX® Lite Front Plate Cubes

Zoom in

Description Spare part for the Bondtech LGX® Lite. Cube pattern front plate made of grey polyamide without colouring. Features a protective wax coating and the LGX® Lite Bondtech sticker.

Specifications

Brand:	Bondtech	Our item no:	DBO00101
Dimensions:	20 x 50 x 100 mm	Weight:	0.02 kg

€7.75

€6.30 Excl. 23% VAT

EU warehouse

Bondtech LGX® Lite Front Plate Desert

Zoom in

Description Spare part for the Bondtech LGX® Lite. Desert pattern front plate in grey polyamide without coloring. Features a protective wax coating and the LGX® Lite Bondtech sticker.

Specifications

Brand:	Bondtech	Our item no:	DBO00102
Dimensions:	20 x 50 x 100 mm	Weight:	0.02 kg

€7.75

€6.30 Excl. 23% VAT

EU warehouse

Bondtech LGX® Lite Front Plate Annular

Zoom in

Description Spare part for the Bondtech LGX® Lite. Ring pattern front plate made of grey polyamide without colouring. Features a protective wax layer LGX® Lite Bondtech sticker.

Specifications

Brand:	Bondtech	Our item no:	DBO00103
Dimensions:	20 x 50 x 100 mm	Weight:	0.02 kg

€7.75

€6.30 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Creality3D CR-10(S)/Ender-3

Zoom in

Description This Bondtech extruder upgrade kit for the Creality CR-10(S) and Ender-3 replaces the original extruder. This set can also be used on the CR-10S printer from Creality, only the mounting bracket has no attachment for the filament detection sensor of the CR-10S printer.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting: 415 (1.75mm) steps/mm

Reverse the direction of rotation, refer to the installation manual.

Instruction manual
Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00014
Filament diameter:	1.75 mm

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Creality3D CR-10S

Zoom in

Description The Bondtech extruder upgrade kit for the Creality CR-10S (and other printers that use the same type of mounting plate) replaces the original extruder.

The unique dual drive ensures trouble-free material feeding, high performance, reliability and precision. The filament will no longer slip or show signs of wear. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

E-step setting : 415 (1.75mm) steps/mm

Reverse the direction of rotation, refer to the installation manual.

Instruction manual
Data sheet (PDF)

Specifications

Brand:	Bondtech	Our item no:	DBO00010
Filament diameter:	1.75 mm

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Creality3D CR-10 V2

Zoom in

Bondtech extruder upgrade kit for Creality3D CR-10 V2 With the Bondtech extruder upgrade kit for the Creality CR-10 V2 (and other printers that use the same type of mounting plate) you can now print even faster with both rigid and flexible filament types, without filament jamming!

The unique dual drive ensures trouble-free material feeding, high performance, greater reliability and a higher degree of precision. The filament will no longer jam or show signs of wear thanks to the minimal space of 0.1mm and the shortened PTFE tube between the extruder and the filament sensor.

This upgrade kit contains the latest version of the Bondtech Mini Geared extruder, fitted with a brass motor gear, Pneufit coupling and black housing. The housing parts are professionally SLS printed in nylon for maximum strength and precision.

To use this upgrade kit, you must make the following adjustments:

E-steps : 415 (1.75mm) steps/mm
Gear ratio : 3:1
Slicer Machine Settings: Maximum Z-height to 390mm

Note: Use the original motor during assembly, no separate motor is included.

Instruction manual
Data sheet (PDF)

Specifications

Brand:

Bondtech

Our item no:

DBO00017

€95.50

€77.64 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Prusa I3 MK2 - MK2S

Zoom in

Description This Bondtech extruder upgrade kit is suitable for the Prusa I3 MK2 and the MK2S and already has gears. This kit includes parts to convert the extruder to a 3:1 gear ratio, which provides greater precision, higher resolution, optimised geometry for the heatsink and many other improvements. In addition, the weight is reduced, which reduces vibrations and ghosting.

This set comes with a 25mm pancake stepper, with a torque of 18 Ncm for a lightweight yet powerful extrusion and a new cable for connecting the motor. Use the part cooling fan (50mm x 15mm) of the current printer, it is not included with this item.

The E steps should be updated to 415 for MK2, MK2s and MK2.5. Follow Prusa/Bondtech guide for E steps calibration for MK2s and MK2.5.

The weight is reduced by 121 grams.

Installation files
Firmware (MK3S 3.7.0.)

Specifications

Brand:

Bondtech

Our item no:

DBO00012

€123.50

€100.41 Excl. 23% VAT

EU warehouse

Bondtech extruder upgrade kit for Prusa I3 MK2.5 - MK3

Zoom in

Description The Bondtech extruder upgrade kit is suitable for the Prusa I3 MK2.5 and the MK3 and already have gears. This kit includes parts to convert the extruder to a 3:1 gear ratio, which provides greater precision, higher resolution, optimised geometry for the heatsink and many other improvements. In addition, the weight is reduced, which reduces vibrations and ghosting.

This set comes with a 25mm pancake stepper, with a torque of 18 Ncm for a lightweight yet powerful extrusion and a new cable for connecting the motor. Use the part cooling fan (50mm x 15mm) and original (40mm x 40mm x 10mm) of the current printer, these are not included in this article, as well as the filament sensor.

The E steps should be updated to 415 for MK2, MK2s and MK2.5. Follow Prusa/Bondtech guide for E steps calibration for MK2.5 and MK3.

The weight is reduced by 121 grams.

Installation files
Firmware (MK3S 3.7.0.)

Specifications

Brand:

Bondtech

Our item no:

DBO00011