Bondtech

97 - 105 of 105

Bondtech CHT® BiMetal MK8 coated nozzle, 1.75mm x 1.00mm

Description The Bondtech CHT® BiMetal MK8 coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your RepRap M6 heat block (or similar) by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

bq Hephestos
Hephestos 2
bq Prusa i3 Hephestos
bq Witbox
bq Witbox 2
Creality CR-10
Creality CR-10-S4
Creality CR-10-S5
Creality CR-10S
MakerBot Replicator
Maker Bot Replicator 2
MakerBot Replicator 2X
Creality Ender 2
Creality Ender 3 Pro
Creality CR-20 Pro
Creality Ender 5
Craft bot family
Creality CR-10 V2
Creality CR-6 SE
Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Copper	Our item no:	DAR00957
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€48.00

€39.02 Excl. 23% VAT

EU warehouse

Bondtech Raise3D Pro2 Upgrade Bundle

Zoom in

Description Would you like to get the most out of your 3D printer? The Bondtech Raise3D Pro2 Upgrade Bundle makes it possible. You can prevent common problems such as under extrusion and clogging with this Slice Engineering upgrade. The result: higher resolution and less downtime and failed prints. You also waste less filament. It makes printing easier and more fun.

The set consists of the following products:

2 x Copperhead™ Hotend – Standard – G2
2 x Vanadium™ Nozzle – 0.4mm
1 x Boron Nitride Paste 2x Custom Industrial Heater – 50W 24V / 300mm / bare leads
2 x Custom Thermocouple – Type K / 285mm / Bare Leads

The bundle is suitable for the following printers:

Raise3D Pro2
Raise3D Pro2 Plus

Specifications

Brand:	Bondtech	Our item no:	DAR00979
Filament diameter:	1.75 mm	Voltage:	24 v
Nozzle diameter:	0.4 mm

€327.00

€265.85 Excl. 23% VAT

EU warehouse

Bondtech FDM X-Carriage kit for Prusa i3 MK3S

Zoom in

Description The Bondtech FDM X-Carriage kit is required to install the Bondtech upgrade kit for the Prusa i3 MK3S. This FDM version is suitable for use at room temperature.

This kit contains:

FDM X-Carriage front
FDM X-Carriage rear
5x M3x10 screws
5x M3 square nut
1x M3 nut

The SLS X-Carrige higher temperature kit can be found here.

Specifications

Brand:

Bondtech

Our item no:

DBO00018

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€10.50 (coming soon)

€8.54 Excl. 23% VAT

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.40mm

Zoom in

Description Increase the quality of your prints with the CHT Spider Coated Brass Nozzle from Bondtech. This nozzle provides more melting capacity, allowing you to print faster and save time. You can also make stronger prints due to the improved layer adhesion. The CHT Spider nozzle is compatible with the Creality Spider hotend (V1) and can be used with many different filaments, including PLA, TPU, Nylon and HIPS. The nozzle size is 0.40mm and is suitable for 1.75mm filament.

Specifications

Brand:	Bondtech	Nozzle diameter:	0.4 mm
Download TDS:	Download	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01372
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.60mm

Zoom in

Specifications

Brand:	Bondtech	Nozzle diameter:	0.6 mm
Download TDS:	Download	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01373
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 0.80mm

Zoom in

Specifications

Brand:	Bondtech	Nozzle diameter:	0.8 mm
Download TDS:	Download	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01374
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech CHT® Spider Coated brass nozzle, 1.75mm x 1.00mm

Zoom in

Specifications

Brand:	Bondtech	Nozzle diameter:	1 mm
Download TDS:	Download	Nozzle type:	Creality Spider / Ender-7
Filament diameter:	1.75 mm	Our item no:	DAR01375
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6

Nozzle diameter:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Bondtech SLS DDX Adapter for Mosquito hotends

Zoom in

Description This adapter can be used for the Bondtech DDX Direct Drive eXtruder for Creality. The adapter is necessary before the Mosquito hotend can be installed in a DDX Upgrade Kit.

Specifications

Brand:

Bondtech

Our item no:

DAR01433

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€11.50 (coming soon)

€9.35 Excl. 23% VAT

Bondtech LGX Lite V2 extruder

Zoom in

Description The LGX Lite V2 extruder from Bondtech uses a new dual drive technology that uses larger drive gears. These larger drive gears provide a better grip on the filament and are easy to maintain due to the maintenance windows. The filament tension lever comes with 3 settings: open, tight and flexible. The LGX Lite V2 is a lightweight extruder with improved heat resistance, tighter tolerances and a micro form factor. The extra mounting holes ensure easy mounting with multiple options. The extruder is compatible with round Nema14 stepper motors and has the classic, black Bondtech appearance.

Specifications

Brand:

Bondtech

Our item no:

DBO00108