Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Customer reviews

Official Reviews.io

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Creality 3D Ender-3 upgrades

Creality 3D BLTouch auto bed levelling kit v1

Creality 3D BLTouch auto bed levelling kit v1 DAR00014

Description The Creality 3D BLTouch kit is specially composed for the Creality printers. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.
The Creality BLTouch sensor is suitable for various print bed surfaces, such as metal, glass, wood and tape.

Note: 123-3D.ie does not offer support when installing this kit. Before installing, make sure the polarisation and connectors match your motherboard. The installation video is for the Ender-3, please download the correct firmware for your printer type.

Specifications

Brand:	Creality 3D	Video instructions:	Instructional video
Our item no:	DAR00014	Voltage VDC:	5 v/°c

€55.50

€45.12 Excl. 23% VAT

In stock

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Antclabs BLTouch Auto Bed Levelling Sensor v3.1 DAR00016

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Brand:	ANTCLABS	Our item no:	DAR00016
Cable length:	15 cm	Voltage VDC:	5 v/°c
Manual:	Download	Weight:	0.01 kg

€39.50

€32.11 Excl. 23% VAT

In stock

Print bed upgrade kit

Print bed upgrade kit DAR00223

Description Improve the adhesion of your 3D print with this specially developed print bed kit for your Ender-3 (pro/V2) 3D printer.

The kit consists of:

1x Glass plate with ultrabase coating (235mm x 235mm x 4mm)
1x 3DLAC adhesive spray (400ml)
1x Heated bed clamps (set of 4)

The glass plate is easy to clean with water and made of toughened glass with an ultrabase coating. The 3DLAC adhesive spray ensures even better adhesion and thanks to the clamps you can mount or remove the glass plate in no time! Also compatible with the Creality 3D CR-20 (pro), the CP-01 and the Ender-5 (pro).

Note: We recommend that you let your bed cool down before removing the print. Extreme adhesion of PETG filament can damage the glass.

Specifications

Brand:	123-3D	Our item no:	DAR00223
Dimensions:	235 x 235 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€36.50 (coming soon)

€29.67 Excl. 23% VAT

Bowden hotend kit for Creality 3D Printers

Bowden hotend kit for Creality 3D Printers DAR00225

Description Give your Creality 3D printer an upgrade with this Bowden hotend kit!

The hot end kit consists of:

1 x Aluminium MK8 Bowden Extruder Upgrade kit red right
1 x Capricorn TL 1 Meter transparent PTFE tube 1.75mm
1 x Micro Swiss All Metal Hotend Kit for Creality CR-10 / Ender 3D Printers

The Bowden extruder is made of durable, red aluminium and suitable for filament with a diameter of 1.75mm. With the PTFE tube you can easily connect the whole to the metal Micro Swiss hotend kit, which consists of an aluminium cooling block, a titanium heatbreak, an aluminium heater block, a brass-coated nozzle of 0.4mm, a silicone sock and various mounting parts.

Suitable for the following 3D printers:

Creality CR-10
Creality CR-10 Mini
Creality CR-10S
Creality CR-10 S4
Creality CR-10 S5
Creality CR-20
Creality CR-20 Pro
Creality Ender-3
Creality Ender-3 Pro
Creality Ender-5
Creality Ender-5 Plus

Specifications

Brand:

123-3D

Our item no:

DAR00225

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€117.50 (coming soon)

€95.53 Excl. 23% VAT

Creality 3D Printer housing, 480mm x 600mm x 720mm

Creality 3D Printer housing, 480mm x 600mm x 720mm DAR00261

Description The Creality 3D printer housing (S) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapors and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. Measuring 480mm x 600mm x 720mm, it is suitable for open frame printers such as the Ender-3, Ender-3 Pro, Ender-3 V2, CP-01, and others.

Specifications

Brand:	Creality 3D	Our item no:	DAR00261
Colour:	black	Size:	S
Dimensions:	720 x 480 x 600 mm

Size:

Extra information

€80.50

€65.45 Excl. 23% VAT

In stock

Creality 3D Printer housing, 760mm x 650mm x 720mm

Creality 3D Printer housing, 760mm x 650mm x 720mm DAR00262

Description The Creality 3D printer housing (M) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapors and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. Measuring 760mm x 650mm x 720mm, it is suitable for open frame printers such as the Ender-3 series, Ender-5 (Pro) CP-01, CR-X, CR-6 SE, CR-10 (S/Pro/ Mini/V2/V3), CR-20 series and others.

Specifications

Brand:	Creality 3D	Our item no:	DAR00262
Colour:	black	Size:	M
Dimensions:	720 x 760 x 650 mm

Size:

Extra information

€85.50

€69.51 Excl. 23% VAT

In stock

Creality 3D Printer housing, 700mm x 750mm x 900mm

Creality 3D Printer housing, 700mm x 750mm x 900mm DAR00263

Description The Creality 3D printer housing (L) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapors and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. With dimensions of 700mm x 750mm x 900mm, it is suitable for open frame printers such as the Ender-3 series, Ender-5 (Pro/Plus) CP-01, CR-X (Pro), CR-6 SE, CR-10 (S/Pro/Mini/V2/V3), CR-20 series and others.

Specifications

Brand:	Creality 3D	Our item no:	DAR00263
Colour:	black	Size:	L
Dimensions:	900 x 700 x 750 mm

Size:

Extra information

€93.50

€76.02 Excl. 23% VAT

In stock

E3D Revo CR upgrade kit | 24V | 1.75mm (0.4mm nozzle)

E3D Revo CR upgrade kit | 24V | 1.75mm (0.4mm nozzle) DAR00758

Description With the E3D Revo CR upgrade kit you'll be able to change the nozzle without tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300ᵒC. The set includes a 24V Revo CR hot end with an interchangeable 0.4mm nozzle.

The E3D Revo nozzle has its own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Compatible with the following printers:
	●	CR-20	●	Ender-5
	●	CR-20 Pro	●	Ender-5 Pro
	●	Ender-3	●	Ender-5 Plus
	●	Ender-3 Pro	●	Ender-6
	●	Ender-3 V2

Specifications

Brand:	E3D	Power rating:	40 W
Max temp:	300 °C	Our item no:	DAR00758
Nozzle diameter:	0.4 mm	Voltage:	24 v

€99.00

€80.49 Excl. 23% VAT

EU warehouse

E3D Revo CR upgrade kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

E3D Revo CR upgrade kit | 24V | 1.75mm (0.25/0.4/0.6/0.8mm nozzles) DAR00760

Description With the E3D Revo CR upgrade kit you can change the nozzle without tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300ᵒC. The set includes a 24V Revo CR hot end with four interchangeable 0.25mm, 0.4mm, 0.6mm and 0.8mm diameter nozzles.

The E3D Revo nozzles are equipped with their own heat break. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hot end.

Compatible with the following printers:
	●	CR-20	●	Ender-5
	●	CR-20 Pro	●	Ender-5 Pro
	●	Ender-3	●	Ender-5 Plus
	●	Ender-3 Pro	●	Ender-6
	●	Ender-3 V2

Specifications

Brand:	E3D	Power rating:	40 W
Filament diameter:	1.75 mm	Our item no:	DAR00760
Max temp:	300 °C	Voltage:	24 v

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€149.00 (coming soon)

€121.14 Excl. 23% VAT

E3D Revo CR HeaterCore 24V

E3D Revo CR HeaterCore 24V DAR00762

Description The E3D Revo CR HeaterCore is a 40W 24V heating element that can be easily exchanged with the E3D tool-free exchange system. The heater core is connected to the cold end via a spring and comes with a spring and a sock.

Specifications

Brand:	E3D	Our item no:	DAR00762
Max temp:	300 °C	Voltage:	24 v
Power rating:	40 W

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D Revo CR heatsink

E3D Revo CR heatsink DAR00763

Description The E3D Revo CR heatsink is designed to be used with Creality printers. The extra light construction provides improved, faster performance. The aluminium heatsink is anodised in black and therefore a nice addition to the other Creality parts.

Specifications

Brand:	E3D	Material:	Aluminum
Colour:	black	Our item no:	DAR00763

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€30.50 (coming soon)

€24.80 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Steelmans 3dB noise reduction feet pads DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Brand:	Steelmans3D	Quantity:	4 Quantity
Our item no:	DAR00265	Video promo:	Promotion video

€17.00

€13.82 Excl. 23% VAT

In stock

BigTreeTech RRF E3 v1.1 32-bit mainboard

BigTreeTech RRF E3 v1.1 32-bit mainboard DAR00450

Description

With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The RRF E3 v1.1 is equipped with a USB connection and four motor driver interfaces: XM, YM, ZAM, ZBM, EM. You can easily expand the interface to include a filament detection function, a resume printing function, BLTouch for automatic bed leveling and RGB light. In addition, you can connect the automatic shutdown module so that your 3D printer turns off automatically after the print is completed.

The mainboard has a size of 103.75mm x 75.25mm and is compatible with the Ender 3, Ender 3 Pro, Ender 5 and CR10.

Specifications

Brand:	BigTreeTech	Operating volt logic:	-
Network:	WiFi	Printer has USB:	yes
Input voltage:	12-24V	Processor:	ARM CORTEX M4
Dimensions:	100.75 x 70.25 mm	Our item no:	DAR00450
On-board stepper drivers:	5

€63.50

€51.63 Excl. 23% VAT

In stock

Bondtech DDX V3 Creality Ender & CR-10(S) direct drive extruder

Bondtech DDX V3 Creality Ender & CR-10(S) direct drive extruder DBO00049

Description This Bondtech DDX Extruder is suitable for 3D printers of the Creality Ender and CR-10(S). This copy is a very powerful dual drive extruder based on the BMG Bondtech Mini Geared. It gives you all kinds of options to, for example, print with different materials, use wider nozzles and create super detailed 3D prints. The housing provides effective cooling of the hot end. Thanks to the transmission ratio of 3:1 you can achieve high resolution prints with narrow nozzles or high flow prints with larger nozzles. The kit replaces the original Bowden extruder of your 3D printer. Tools are required to assemble the kit (Allen and screwdrivers).

Specifications

Brand:

Bondtech

Our item no:

DBO00049

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€169.50 (coming soon)

€137.80 Excl. 23% VAT

Capricorn TL Creality 3D kit transparent including pneufit couplings and cutter, 1m

Capricorn TL Creality 3D kit transparent including pneufit couplings and cutter, 1m DBW00052

Description The Capricorn TL Creality Kit is specially composed for the Creality 3D printers (CR-10, CR-10S, Ender-3, Ender-3 Pro).

This kit contains the following parts:

1 Metre 1.75mm Fluorescent PTFE Tubing
PC4-M6 Extruder Pneufit for Creality
PC4-M10 Hotend Pneufit for Creality
Premium Ultra-Sharp PTFE Cutter

Specifications

Brand:	Capricorn	Length:	1 m
Colour:	transparent blue	Material:	PTFE
Filament diameter:	1.75 mm	Outer diameter:	4 mm
Inner diameter:	2 mm	Our item no:	DBW00052

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Capricorn XS Creality 3D kit incl. pneufit couplings and cutter, 1m

Capricorn XS Creality 3D kit incl. pneufit couplings and cutter, 1m DBW00053

Description The Capricorn XS Creality Kit is specially composed for the Creality 3D printers (CR-10, CR-10S, Ender-3, Ender-3 Pro).

The kit contains the following parts:

1 Meter 1.75mm XS PTFE Tubing
PC4-M6 Extruder Pneufit for Creality
PC4-M10 Hotend Pneufit for Creality
Premium Ultra-Sharp PTFE Cutter

Specifications

Brand:	Capricorn	Length:	1 m
Colour:	dark blue	Material:	PTFE
Filament diameter:	1.75 mm	Outer diameter:	4 mm
Inner diameter:	1.9 mm	Our item no:	DBW00053

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Aluminium MK8 Bowden red right extruder upgrade kit

Aluminium MK8 Bowden red right extruder upgrade kit DEX00011

Description This red aluminium MK8 Extruder Upgrade Kit replaces the original plastic extruder which is less durable and can lead to extrusion problems in the long run.

The Extruder is suitable for filament with a diameter of 1.75mm.

Compatible with the following printers:
	●	Creality CR-10	●	Creality Ender-3
	●	Creality CR-10S	●	Creality Ender-3 Pro
	●	Creality CR-10S4	●	Creality CR-20
	●	Creality CR-10S5	●	Creality CR-20 Pro
	●	Creality CR-10 MINI	●	Creality Ender 5
	●	Creality Ender 5 Plus

Specifications

Brand:	123-3D	Material:	Aluminum
Colour:	red	Our item no:	DEX00011
Filament diameter:	1.75 mm

€23.50

€19.11 Excl. 23% VAT

In stock

Aluminium MK8 Bowden black right extruder upgrade kit

Aluminium MK8 Bowden black right extruder upgrade kit DEX00013

Description This black aluminium MK8 Extruder Upgrade Kit replaces the original plastic extruder which is less durable and can lead to extrusion problems in the long run.

The Extruder is suitable for filament with a diameter of 1.75mm.

Compatible with the following printers:
	●	Creality CR-10	●	Creality Ender-3
	●	Creality CR-10S	●	Creality Ender-3 Pro
	●	Creality CR-10S4	●	Creality CR-20
	●	Creality CR-10S5	●	Creality CR-20 Pro
	●	Creality CR-10 MINI	●	Creality Ender 5
	●	Creality Ender 5 Plus

Specifications

Brand:	123-3D	Material:	Aluminum
Colour:	black	Our item no:	DEX00013
Filament diameter:	1.75 mm

€23.50

€19.11 Excl. 23% VAT

In stock

Aluminium MK8 Bowden gold right extruder upgrade kit

Aluminium MK8 Bowden gold right extruder upgrade kit DEX00015

Description This gold Aluminium MK8 extruder upgrade kit replaces the original plastic extruder which is less durable and can lead to extrusion problems in the long run.

The extruder is suitable for filament with a diameter of 1.75mm.

Compatible with the following printers:
	●	Creality CR-10	●	Creality Ender-3
	●	Creality CR-10S	●	Creality Ender-3 Pro
	●	Creality CR-10S4	●	Creality CR-20
	●	Creality CR-10S5	●	Creality CR-20 Pro
	●	Creality CR-10 MINI	●	Creality Ender 5
	●	Creality Ender 5 Plus

Specifications

Brand:	123-3D	Material:	Aluminum
Colour:	gold	Our item no:	DEX00015
Filament diameter:	1.75 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€23.50 (coming soon)

€19.11 Excl. 23% VAT

Heated bed spring, 25mm (4-pack)

Heated bed spring, 25mm (4-pack) DME00139

Description These heated bed springs are suitable as an upgrade or replacement of the original springs of your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be leveled less often.

Specifications

Brand:	123-3D	Length:	25 mm
Colour:	orange	Outer diameter:	8 mm
Inner diameter:	5 mm	Our item no:	DME00139

€5.75

€4.67 Excl. 23% VAT

In stock

Belt Tensioner 2020 X-axis for Ender 3 Pro

Belt Tensioner 2020 X-axis for Ender 3 Pro DME00223

Description With this handy belt tensioner kit you can easily tension the belts of your 3D printer.

The belt tensioner is made of aluminium and suitable for tensioning the x-axis of your Ender 3 Pro to prevent printing problems.

Specifications

Brand:	123-3D	Our item no:	DME00223
Material:	Aluminum

€9.95

€8.09 Excl. 23% VAT

In stock

Heated bed spring, 30mm (4-pack)

Heated bed spring, 30mm (4-pack) DME00298

Description These heated bed springs are suitable as an upgrade or replacement of the original springs for your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be leveled less often.

Specifications

Brand:	123-3D	Length:	30 mm
Colour:	orange	Outer diameter:	8 mm
Inner diameter:	5 mm	Our item no:	DME00298

€5.75

€4.67 Excl. 23% VAT

In stock

Micro Swiss all metal Hotend Kit for CR-10 Ender 3D Printers

Micro Swiss all metal Hotend Kit for CR-10 Ender 3D Printers DMS00021

Description This all-metal hot-end set from Micro Swiss for the Creality 3D Printers is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and therefore ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost x3 lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heat break
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
silicone sock
Fastening parts

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
		Creality CR-10		Creality CR-20		Creality Ender-5
		Creality CR-10 Mini		Creality CR-20 Pro		TronXY X5S
		Creality CR-10S		Creality Ender-2		Tevo Tornado
		Creality CR-10S4		Creality Ender-3
		Creality CR-10S5		Creality Ender-3 Pro

NOTE: Not suitable for the Creality CR-10 V2

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00021

€75.50

€61.38 Excl. 23% VAT

In stock

Micro Swiss Heater Block with silicone sock for CR-10 Printers

Micro Swiss Heater Block with silicone sock for CR-10 Printers DMS00101

Description The Micro Swiss Heater Block with silicone sock is an upgrade for various Creality printers, among others.

Aluminium Heater Block
Silicone Sock
Allen key

Compatible with the following printers:
		Creality CR-10-S5		Ender 2
		Creality CR-10-S4		Ender 3
		Creality CR-10S		TronXY X5S
		Creality CR-10 MINI		MK7, MK8, MK9 Hotends

Specifications

Brand:	Micro Swiss	Our item no:	DMS00101
Material:	Aluminum

€14.00

€11.38 Excl. 23% VAT

In stock

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack)

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack) DMS00102

Description With these silicone socks you ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, is more favorable for overhangs, bridges and ensures more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block. One sock lasts at least 100 printing hours.

Compatible with the following printers:
		Creality CR-10		MakerBot Replicator 1
		Creality CR-10S		MakerBot Replicator 2
		Creality CR-10S4		MakerBot Replicator 2x
		Creality CR-10S5		MakerBot Replicator 5th Gen
		Creality CR-10 MINI		MakerBot Replicator Mini
		Creality Ender-2		MakerBot Replicator z18
		Creality Ender-3		CraftBot 2
		Creality Ender-3 Pro		CraftBot PLUS
		Creality CR-20		BQ White box
		Creality CR-20 Pro		BQ Prusa I3 Hephestos
		Anet A6		TronXY X5S
		Anet A8		Tevo Tornado
		Alfawise U20		Micro Swiss All Metal Hotend for CR-10
		Alfawise U30		Micro Swiss All Metal Hotend for CR-10s Pro
		Prusa i3 MK2		anycubic
		Prusa i3 MK2S		Printers with a E3D V4 / V5 / V6 1.75 mm Hotend
		Prusa i3 MK3

Specifications

Brand:	Micro Swiss	Our item no:	DMS00102
Material:	Silicone	Quantity:	3

€12.50

€10.16 Excl. 23% VAT

In stock

Creality 3D Silent Mainboard v4.2.7

Creality 3D Silent Mainboard v4.2.7 DRW00068

Description With this motherboard you can easily upgrade your Creality 3D printer. You only replace the motherboard within a few minutes, after which you can immediately start working with your improved 3D printer!

This upgrade improves the following performance:

The motherboard with TMC2225 driver makes your printer run a lot quieter
+50% printing precision
-40% power consumption

Other characteristics:

MCU 32 bit
Easy installation of your Antclabs BLTouch Leveling Sensor
Bootloader installed (ISP/USB Arduino)
Firmware 4.2.7 is preinstalled on this board
The board is pre-installed for the Ender-3, but also suitable for the Ender-3 V2, Ender-3 Pro and Ender 5.

CAUTION: Always install the latest firmware for your printer.

Specifications

Brand:	Creality 3D	Our item no:	DRW00068
On-board stepper drivers:	4

€67.50

€54.88 Excl. 23% VAT

In stock

Creality 3D Ender-3 v2 aluminum stepper motor block

Creality 3D Ender-3 v2 aluminum stepper motor block DAR00435

Description Elevate your Creality 3D printing experience with our original upgrade kit. Enjoy enhanced heat dissipation and significantly improved reliability for your Z-axis motor. Make every print smoother and more precise than ever before.

Specifications

Brand:

Creality 3D

Our item no:

DAR00435

€4.50

€3.66 Excl. 23% VAT

In stock

Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers DAR00798

Description The NG Direct Drive Extruder from Micro Swiss is suitable for Creality CR-10 and Ender 3 printers. Thanks to the Bevel Gear design, the extruder has a short filament path of less than 41 mm. The placement of the motor allows for a very compact design with little overhang. This increases the rigidity of the system.

Further highlights:

Dual-gear drive made of hardened steel
3:1 gear ratio
Lightweight
Integrated with an all-metal hotend

This product contains:

Screws and wrenches
1x mounting plate
1x hot end
1x extension cable
1x Stepper Motor
1x Extruder Assembly
1x fan shroud

Specifications

Brand:	Micro Swiss	Filament diameter:	1.75 mm
Manual:	Manual	Our item no:	DAR00798

€127.50

€103.66 Excl. 23% VAT

EU warehouse

Creality 3D Pad mini 4.3" touchscreen

Creality 3D Pad mini 4.3" touchscreen DAR00817

Description The Creality 3D pad mini allows you to visualise and track the progress of your 3D print. With a better view of the print model, you prevent errors earlier and the printing process becomes more intuitive. Combine the Pad mini with the 3D Digital Spool-C for real-time monitoring of filament weight. This way you can immediately see whether there is still enough filament available for your 3D print.

The 4.3 inch HD screen has a resolution of 480 x 272 pixels. On the side you will find a USB connection, so that the 3D printer can read Gcode files directly. The intelligent interface allows for a lot of personalisation, such as setting your own screensaver. The interface is also available in 11 languages.

The Creality 3D Pad mini is compatible with the following printers with a 32-bit mainboard:
Ender-3, Ender-3 Pro and the Ender-3 v2.

Specifications

Brand:	Creality 3D	Our item no:	DAR00817
Colour:	black	Voltage:	5 v
Dimensions:	21.2 x 124 x 108.2 mm	Weight:	0.27 kg

€51.50

€41.87 Excl. 23% VAT

EU warehouse

Creality 3D Pad 5" HD touchscreen

Creality 3D Pad 5" HD touchscreen DAR00818

Description The Creality 3D pad allows you to visualise and track the progress of your 3D print. With a better view of the print model, you prevent errors earlier and the printing process becomes more intuitive. The 5 inch HD screen has 854 x 480 ppi and has a very high sensitivity. The touchscreen is suitable for all FDM 3D printers with Marlin firmware. Thanks to the Plug and Print principle, you can easily connect the Creality 3D pad to your 3D printer.

Properties:

Print effects: create texture with one click, e.g. with 3D prints of animals
Power Loss Resume: Keeping the Design
Filament Run-out Detection: no more blank prints
11+ languages available

The Creality Pad 5" is compatible with the following printers:
CR-10S, CR-10S Pro, CR-5 Pro, CR-5 Pro H, CP-01, Ender-3 Max, Ender-3, Ender-3 Pro, Ender-3 S1, Ender-3 V2, Ender-5 Pro, Ender-5 Plus, Ender-7, CR-10 V3, CR-10 V2, CR-10 Max, CR-6 SE, CR-6 Max, CR-30, CR-X Pro and the CR-200B.

Specifications

Brand:	Creality 3D	Our item no:	DAR00818
Colour:	black	Weight:	0.295 kg
Dimensions:	13.5 x 133.5 x 76.2 mm

€67.50

€54.88 Excl. 23% VAT

In stock

Creality 3D Sprite extruder pro kit, 300℃ high temperature

Creality 3D Sprite extruder pro kit, 300℃ high temperature DAR00820

Description This Creality 3D Sprite extruder pro kit can be used to replace the original extruder pro kit if it is damaged or old. It is compatible with Creality 3D Sprite printers.

Specifications

Brand:	Creality 3D	Dimensions:	64.3 x 54 x 50 mm
Current rating:	0.8 A	Nozzle temp range:	0 - 300 °C
Filament diameter:	1.75 mm	Our item no:	DAR00820

€102.00

€82.93 Excl. 23% VAT

EU warehouse

Creality 3D Spider high-temperature and high-speed hotend

Creality 3D Spider high-temperature and high-speed hotend DAR00823

Description With the Spider high-temperature and high-speed hotend from Creality 3D you can print up to 250mm/s. The hotend can reach a maximum temperature of 500°C and is suitable for various filaments such as PLA, ABS, PETG, TPU, PP, PC and nylon.

This part is easy to install in your CR-10, CR-10 Mini, CR-10 V3, CR-10S, CR-10S4, CR-10S5, CR-20, CR-20 Pro, Ender-2, Ender-2 Pro, Ender-3, Ender-3 Max, Ender-3 Pro, Ender-3 S1, Ender-3 V2, Ender-4, Ender-5, Ender-5 Plus, Ender-5 Pro, Ender-6 and Ender-7 printers.

Specifications

Brand:	Creality 3D	Max temp:	500 °C
Colour:	black	Our item no:	DAR00823
Filament diameter:	1.75 mm	Weight:	70 grams

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€40.50 (coming soon)

€32.93 Excl. 23% VAT

Creality 3D Dual lead screw upgrade kit

Creality 3D Dual lead screw upgrade kit DAR00825

Description With this upgrade kit for the Creality Ender-3 series printers, you can quickly and easily give the printer an extra Z-axis to achieve even better print precision. This upgrade kit contains all necessary parts to connect and mount the kit.

Compatible with the following Creality Printers: Ender-3, Ender-3 Pro, Ender-3 v2, Ender-3 Neo and the Ender-3 v2 Neo.

Specifications

Brand:	Creality 3D	Weight:	0.83 kg
Our item no:	DAR00825

€31.50

€25.61 Excl. 23% VAT

In stock

Mintion Beagleprint 3D Printer Camera (32GB)

Mintion Beagleprint 3D Printer Camera (32GB) DAR00873

Description Monitor and remotely control your 3D printer? The Mintion Beagleprint 3D Printer Camera makes it possible. The camera allows you to monitor and control printing processes remotely and in real time. If something goes wrong, you'll know right away. You can then simply stop printing using the app. This prevents a print from completely failing and filament being lost unnecessarily. Because the camera has a night mode, no extra lighting is needed when filming in the dark – useful if your printer also works overtime at night. So you save on energy!

An image is also made after printing each layer. And without any setting or command, the camera then generates a beautiful Time-lapse video. You can download this via the app or your PC. The camera is suitable for a large number of 3D printers.

Check here whether your printer is compatible.

Specifications

Brand:	Mintion	Storage:	32GB
Network:	WiFi	Weight:	0.15 kg
Our item no:	DAR00873

€85.50

€69.51 Excl. 23% VAT

EU warehouse

Creality 3D Sonic Pad

Creality 3D Sonic Pad DAR00885

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Brand:	Creality 3D	Our item no:	DAR00885
Colour:	black	Voltage:	12 v
Standard WiFi connection:	802.11 b/g/n	Weight:	0.46 kg
Dimensions:	40 x 222 x 128 mm

€159.50

€129.67 Excl. 23% VAT

€180.00 Creality3D rrp

In stock

Creality 3D Laser module 1.6W | 24V

Creality 3D Laser module 1.6W | 24V DAR00961

Description Open up a world of extra possibilities by converting your 3D printer into a laser engraving machine with the Creality 3D Laser module 1.6W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration, you can use the focus lens and the lever. Gently push this lever down to focus accurately. When you are done focusing, you can lift the lever back up to store it safely.

Other functionalities
You can engrave up to 0.06mm accurately thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05mm balsa wood plate. In addition, this laser module offers the possibility to work with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engraving and laser cutting, or pause the current action. By using a TF card/MicroSD card, you can also make beautiful creations without connecting the 3D printer to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Brand:	Creality 3D	Our item no:	DAR00961
Power rating:	1,600 mw	Voltage:	24 v

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€87.50 (coming soon)

€71.14 Excl. 23% VAT

Creality 3D Laser module 5W | 24V

Creality 3D Laser module 5W | 24V DAR00962

Description Open a world of extra possibilities by converting your 3D printer into a laser engraving machine with this Creality 3D Laser module 5W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration you can use the focus lens and lever. Gently push this lever down to focus accurately. When you have finished focusing, you can raise the lever again for safe storage.

Other functionalities
You can engrave accurately up to 0.06mm thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05mm sheet of balsa wood. In addition, this laser module offers the possibility of working with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engrave and cut, or pause the current action. By using a TF card/MicroSD card you can also make beautiful creations without the 3D printer being connected to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Brand:	Creality 3D	Our item no:	DAR00962
Power rating:	5 W	Voltage:	24 v

€149.00

€121.14 Excl. 23% VAT

EU warehouse

Creality 3D E-Fit Dual drive extruder kit

Creality 3D E-Fit Dual drive extruder kit DAR00963

Description The E-Fit kit is the perfect extruder upgrade for various models of Creality 3D printers. This powerful module is compact and suitable for both bowden and direct drive applications. The quick release design makes replacing filament a breeze, while the dual drive gears ensure perfect throughput.

The Creality E-Fit extruder kit is suitable for the following models of 3D printers:

Ender-3
Ender-3 V2
Ender-3 Pro
Ender-3 S
CR-10S
CR-10
CR-10 S5
CR-10 S4
CR-10 Mini
CR-20
CR-20 Pro

Contents of the package:

Back plate
Fan adapter plate
Tie wraps
Allen keys
Air passage
Screws
Connector
Silicone pad
PTFE tube
Motor cable

Specifications

Brand:	Creality 3D	Filament diameter:	1.75 mm
Extruder Gear Ratio:	3:1	Our item no:	DAR00963

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Creality 3D CR Touch Auto levelling kit

Creality 3D CR Touch Auto levelling kit DAR01045

Description The Creality 3D CR Touch Auto levelling kit is a solution for automatically leveling your 3D printer. It performs multi-point detection on the bed and records the height of each detection point.

The CR Touch has a metal probe that reduces wear and significantly extends its life. It works with PEI, glass, metal, magnetic circuit boards, carborundum glass and other 3D printing platform materials.

It is easy to install and use. You just need to download firmware from Creality official website and copy it to TF/SD card. Insert the card directly into the card slot on the 3D printer. The program can be updated after power on.

The CR Touch only works on 3D printers with a 32-bit motherboard.

Specifications

Brand:	Creality 3D	Our item no:	DAR01045
Dimensions:	39.3 x 27 x 17.5 mm	Weight:	0.05 kg

€51.50

€41.87 Excl. 23% VAT

EU warehouse

Creality 3D PEI bonding platform kit, 235mm x 235mm x 2mm

Creality 3D PEI bonding platform kit, 235mm x 235mm x 2mm DAR01100

Description This magnetic PEI bonding platform kit from Creality is suitable for the following Creality printers:

Ender-3
Ender 3 Pro
Ender-3 V2

Ender-3 S1
Ender-5
Ender-5 S1

Ender-5 Pro
CR-20
CP-01

Use this set as a replacement for your current bonding platform or as an extra build plate to continue printing as quickly as possible after your print is ready.

Specifications

Brand:	Creality 3D	Our item no:	DAR01100
Dimensions:	2 x 235 x 235 mm

€35.50

€28.86 Excl. 23% VAT

In stock

BigTreeTech Panda PWR

BigTreeTech Panda PWR DAR01858

1
0

Description Make it easy on yourself with the Panda PWR from Bigtreetech. This smart power management module can be controlled remotely via wifi, allowing you to monitor and switch off the power at any time. The ability to monitor your power consumption and costs in real time also makes the Panda PWR ideal for print farms. This module is suitable for Creality Ender/K1, Anycubic Kobra and Bambu Lab 3D printers.

User friendly
You can easily control the Panda PWR via your mobile or the Panda Touch. Connect the Panda PWR to your 3D printer and the power outlet. When the blue indicator light starts to shine, you can connect to the 'PandaPWR' network and the default password is 987654321. It is recommended to change this password after the first time logging in. After the setup page is opened, you can select your own network. The Panda PWR has 3 USB ports for enhanced support. USB1 is controllable, which makes it most suitable for devices that do not need constant power, such as USB light strips and USB fans. USB2 is always on and is therefore ideal for devices that need constant power.

Combine with the Panda Touch
The Panda PWR can also be used in combination with the Panda Touch, allowing you to work even more efficiently. By connecting 3D printers individually to a Panda PWR, you can control the flow of up to 10 3D printers with the Panda Touch, allowing you to streamline your process. To connect your Panda PWR to your Panda Touch, click the '+' on your Panda Touch and hold the Panda PWR close to it. Press the 'bind' button until the light turns blue. You will get a confirmation pop-up on the Panda Touch and the indicator light will turn green.

Other functionalities
The Panda PWR is made of high-quality materials. The full copper heat sink and the robust protection against overvoltage, overcurrent and short circuits. This makes this product very safe and delivers exceptional performance. This module is approved and contains CE and FCC certifications.

Specifications

Brand:	BigTreeTech	Our item no:	DAR01858
Input voltage:	100-240V

€48.50

€39.43 Excl. 23% VAT

EU warehouse

Creality 3D Sprite Extruder SE

Creality 3D Sprite Extruder SE DAR01244

1
0

Description Push your creative boundaries with the Creality 3D Sprite Extruder SE, specially designed for the DIY enthusiast. This modular extruder is compact, without sacrificing power. The modular design makes it possible to easily adapt the extruder and upgrade it to a direct drive extruder. The dual gear drive structure ensures reliable and stable guidance of filament without damaging it. With the tensioner you can determine the pressure of the drive gear on the filament. This way you can fully customise this to your wishes and get the most out of your project.

The Sprite Extruder SE can work with various filaments, including PLA, PETG, ABS, TPU. This increases your creative possibilities even further. This extruder can be used with the Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5, Ender-5 Pro, Ender-5 Plus and the CR-10.

Specifications

Brand:	Creality 3D	Max current:	0.8 A
Extruder Dual Gear:	yes	Printer extruder:	direct
Extruder Gear Ratio:	3.5:1	Our item no:	DAR01244
Filament diameter:	1.75 mm	Voltage:	1.4 v

€54.50

€44.31 Excl. 23% VAT

EU warehouse

Creality 3D Creality Wifi Box 2.0 (With MicroSD Card)

Creality 3D Creality Wifi Box 2.0 (With MicroSD Card) DAR01274

3
2
1
0

Description Increase your 3D printing fun with the Creality WiFi box 2.0 from Creality 3D. By connecting to this you can control your 3D printer remotely in real time and monitor the status of your print via the Creality Cloud app. The box can be configured quickly and easily via Bluetooth. Finally, the printing history of the WiFi box can be uploaded to the cloud with just one click.

Specifications

Brand:	Creality 3D	Dimensions:	20 x 90 x 64 mm
Colour:	black	Material:	ABS
Standard bluetooth connection:	4.0	Our item no:	DAR01274
Current consumption:	2.4 A	USB version:	USB 2.0
Manual:	Download	Voltage:	5 v
Network:	work ethernet WiFi

€43.50

€35.37 Excl. 23% VAT

In stock

Creality 3D Spider Speedy Ceramic Hotend

Creality 3D Spider Speedy Ceramic Hotend DAR01400

2
1
0

Description Upgrade your 3D printer with this Spider Speedy Ceramic Hotend from Creality 3D. The hotend heats up quickly and is specially designed for printing with a high flow. The hotend is resistant to high temperatures up to 300 °C and very easy to install. This hotend is compatible with the following 3D printers from Creality 3D:

CR-10	Ender-2	Ender-4
CR-10 Mini	Ender-2 Pro	Ender-5
CR-10 S4	Ender-3	Ender-5 Plus
CR-10 S5	Ender-3 Max	Ender-5 Pro
CR-10S	Ender-3 Pro	Ender-6
CR-20	Ender-3 V2
CR-20 Pro	Ender-3 S

Specifications

Brand:	Creality 3D	Weight:	0.05 kg
Our item no:	DAR01400

€89.50 (coming soon)

€72.76 Excl. 23% VAT

Bondtech DDX V3 Creality direct drive extruder

Bondtech DDX V3 Creality direct drive extruder DBO00054

Description This extruder has a double drive and therefore delivers high-quality prints. The extruder is suitable for Creality 3D printers and is compatible with hotends of almost any Creality model, but can also be upgraded to a Copperhead or Mosquito hotend. With this extruder you have more options for materials, higher flow and wider nozzles and thinner layers to achieve a higher print quality.

Specifications

Brand:

Bondtech

Our item no:

DBO00054

€109.50

€89.02 Excl. 23% VAT

EU warehouse

Micro Swiss high temperature MK8 heater block upgrade

Micro Swiss high temperature MK8 heater block upgrade DMS00122

Description The Micro Swiss heating block upgrade is made of a high-temperature copper-chrome-zirconium alloy allows you to reach temperatures of up to 500°C. This special alloy retains its strength at much higher temperatures compared to a normal copper alloy.

It is compatible with 100K thermistor, cartridge-style thermistors, thermocouple, PT100 and PT1000 sensors.

Specifications

Brand:	Micro Swiss	Our item no:	DMS00122
Dimensions:	10 x 21 x 20 mm	Screwthread type:	M6
Material:	Copper

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 (Pro) mainboard v4.2.2

Creality 3D Ender-3 (Pro) mainboard v4.2.2 DRW00033

Description Can also be used for the following printers:
- Creality 3D Ender-5

Specifications

Brand:	Creality 3D	Our item no:	DRW00033
On-board stepper drivers:	4

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€55.50 (coming soon)

€45.12 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

© 2026 - 123-3d.ie