Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

Creality 3D Ender-5 S1 3D printer DKI00134

Description Realize your creative ideas with the Ender 5 S1 3D printer from Creality 3D. The device has a print speed of up to 250mm/s, a motion system for 2000mm/s² acceleration and a layer height of 0.2mm. Each X/Y/Z axis is driven by the high-precision stepper motor. The full metal direct extruder has double gears and a gear ratio of 1:3.5. This makes it ideal for printing with flexible filaments such as TPU. The 3D printer is also suitable for heat-resistant technical plastic filaments such as PC, HIPS, ASA and ABS. You can also use standard filaments such as PETG and PLA. The printer has a 50 mm³ melting chamber surrounded by a large 4000 mm³ heating block. Level the printer's bed with the CR Touch auto leveler. The 3D printer is equipped with a user-friendly 4.3-inch touchscreen.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	570 x 425 x 460 mm	Heatbed max temp:	110 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	28 cm
Nozzle type:	Creality Spider / Ender-7	Max print volume:	13.552
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00134
Has CNC option:	no	Weight:	12.1 kg
Filament sensor:	yes

€375.00 (coming soon)

€304.88 Excl. 23% VAT

GEEETECH A30 Pro 3D Printer

Zoom in

Description The Geeetech A30 Pro 3D printer ensures high-quality prints time and time again with an accuracy of 0.1mm. The printer is equipped with a 32-bit motherboard and thanks to the 'resume printing' option, a print is automatically resumed after a power failure.

The modular design of the printer ensures that it can be set up in three simple steps. A filament run-out sensor monitors your filament and prevents unfinished prints. The printer is easy to operate using the touchscreen. Print from a computer or directly from a TF card.

The printer has a build volume of 320mm x 320mm x 420mm. The V-shaped rails are made of strong aluminium and ensure less noise during printing. The 360° ventilation ensures good cooling performance. The nozzle has a diameter of 0.4mm.

Specifications

Brand:	Geeetech	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	65.7 x 50.8 x 54.5 cm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	32 cm
Nozzle diameter:	0.4 mm	Max print height:	42 cm
Printer bed levelling:	manual	Max print volume:	43.008
Printer extruder:	bowden	Max print width:	32 cm
Extruder max temp:	250 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00060
Filament sensor:	yes	Weight:	13.5 kg

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€387.00 (coming soon)

€314.63 Excl. 23% VAT

Flashforge Adventurer 5M 3D printer

Zoom in

Description The Flashforge Adventurer 5M 3D printer is ideal for bringing your creative ideas to life. The construction volume of 220mm x 220mm x 220mm offers enough space for making larger prints. The print speed can reach up to 600mm/s, meaning your prints will be ready faster. The printed circuit board has a PEI coating on both sides for easy removal of your prints.

Convenience first
The automatic bed leveling system can be activated at the touch of a button. In addition, the printer has vibration compensation to get the perfect first layer. The filament run-out sensor will stop the print before your spool of filament runs out and the 'power loss recovery' allows you to resume the print after a power failure. Both ensure that the chance of your print failing is greatly reduced.

The printer is equipped with a 4.3-inch touchscreen, with which you can control the printer. Connect the printer to the FlashPrint slicing software to prepare your model for printing. With FlashCloud it is also possible to control your printer remotely.

Improved parts
The Adventurer 5M has a new direct drive extruder and fast-heating nozzle. The nozzle can be heated to a maximum temperature of 280°C. This allows you to print different types of filament, even flexible filament, without any problems. You can change the nozzle within 3 seconds using the simple click system. The improved cooling system has a strong fan and double air ducts, which ensure more effective cooling.

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	448 x 363 x 376 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Power rating:	350 W	Max print volume:	10.648
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	280 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00210
Has CNC option:	no	Weight:	10.8 kg
Filament sensor:	yes

€389.50 (coming soon)

€316.67 Excl. 23% VAT

Creality 3D Sermoon V1 Pro 3D Printer

Zoom in

Description Do you want to immediately start with 3D printing, without having to assemble or adjust parts? Then the Creality Sermoon V1 Pro is a perfect choice.

The Sermoon V1 Pro is a compact, closed 3D printer that is immediately ready for use. All you need to do is take the printer out of the box and plug it into the power outlet. The printer is ready to start within seconds! In addition, the one-button operation makes it ideal for novice users.

The most important features

A build space of 175mm x 175mm x 165mm
No levelling required
A direct dual gear extruder
Maximum nozzle temperature of 250°C
Maximum bed temperature of 80°C
Intelligent one-button control for automatic input and output
A filament sensor and resume printing function
A fully enclosed chassis for extra stable and secure printing

Additional features of the Creality Sermoon V1 Pro
The Sermoon V1 Pro has two extra features compared to the normal Sermoon V1:

An HD camera for real-time print control
A door with a safety sensor

Excellent prints
The patented direct drive dual gear extruder contains two chrome gears. These ensure a firm filament grip, even execution of the filament and accurate prints. The simple design allows you to quickly install, remove and maintain the 0.4mm nozzle. The compact cube-shaped printer has an intelligent control - the filament is inserted or removed with one click.

Intelligent sensors
The sensors of the Creality Sermoon V1 Pro detect an unexpected power failure and then save the current printer status. Once the printer starts up again, it will automatically continue at the correct point. In addition, the printer detects ending or broken filament. The 3D printer will then automatically pause and restart once the filament has been replaced. When you open the door, the safety sensor is activated. The printing process then pauses and the device cools down quickly to protect, among other things, curious children's hands.

Effortlessly remove prints
The metal, magnetic circuit board provides stability during printing. The flexible metal makes it easy to remove rounded prints.

Other specifications
You can easily operate the Creality Sermoon V1 Pro with the 4.3-inch touchscreen. The printer can be connected via Wi-Fi and with the Creality Cloud app you can access the printer from anywhere. Thanks to the wide-angle HD camera, you can always monitor your prints in real time. The super quiet fans and the silent IC mainboard ensure a printer that is so quiet that you hardly notice it. The built-in, environmentally friendly LED lighting not only saves energy, but also makes it possible to monitor prints even in the evening and at night.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	no
Dimensions:	43 x 40 x 38 cm	Heatbed max temp:	80 °C
Input voltage:	100-240V	Max print depth:	17.5 cm
Nozzle type:	MK8	Max print height:	16.5 cm
Printer bed levelling:	automatic	Max print volume:	5.053
Printer extruder:	direct	Max print width:	17.5 cm
Extruder max temp:	250 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00103
Filament sensor:	yes	Weight:	11.5 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Assembly manual (video)

€399.50 (coming soon)

€324.80 Excl. 23% VAT

XYZprinting da Vinci 2.0 A Duo 3D Printer

Zoom in

Description The XYZprinting da Vinci 2.0 A Duo is a handy and compact desktop printer that you can place anywhere. Thanks to the double nozzle, you can easily print with two filaments at the same time. This allows you to create complex 3D objects in different colours and materials in no time at all.

Use the 3D printer in combination with PLA, ABS, PLA Tough and PVA filament. You can create prints in a format of 200mm x 200mm x 150mm with a print speed of 150mm/s. Take a look at the extensive XYZgallery app where you will find thousands of designs that you can print immediately.

Specifications

Brand:	XYZprinting	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	70 °C
Dimensions:	51 x 45.8 x 55.8 mm	Max print depth:	20 cm
Input voltage:	100-240V	Max print height:	15 cm
Nozzle diameter:	0.4 mm	Max print volume:	6
Printer bed levelling:	manual	Max print width:	20 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	210 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	12 v/°c
Camera included:	no	Our item no:	DKI00075
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	25 kg
Heated bed included:	yes

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Instructional video

€417.50 (coming soon)

€339.43 Excl. 23% VAT

GEEETECH A30T 3 Colour Mixing 3D Printer

Zoom in

Description The Geeetech A30T 3 Colour Mixing 3D printer supports ABS, PVA and PLA filament, among other things. The printer has room for three colours of filament, which you can alternate or combine in one print. It is also possible to add a colour gradient to your design. Mixing the colours is easy with the Colour Mixer software. The printer is equipped with a 32-bit motherboard and thanks to the 'resume printing' option, a print is automatically resumed after a power failure.

Thanks to the modular design, the printer can be built in three simple steps. The printer has a build volume of no less than 320mm x 320mm x 420mm and the open design allows you to view the print from 360°. The nozzles print with an accuracy of 0.1mm, enabling smooth surface finish and strong structure. In addition, A30T comes with a filament run-out sensor. A filament run-out sensor monitors your filament and prevents unfinished prints.

Specifications

Brand:	Geeetech	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	65.7 x 50.8 x 54.5 cm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	32 cm
Nozzle diameter:	0.4 mm	Max print height:	42 cm
Printer bed levelling:	manual	Max print volume:	43.008
Printer extruder:	bowden	Max print width:	32 cm
Extruder max temp:	250 °C	No of extruders:	3
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00061
Filament sensor:	yes	Weight:	14.3 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€427.00 (coming soon)

€347.15 Excl. 23% VAT

Flashforge Creator Pro 3D Printer

Zoom in

Description The Flashforge Creator Pro is a direct drive dual extruder 3D printer, with two independently configurable hotends. This makes it possible to print easily and quickly with two different materials, such as PLA and PVA.

Thanks to the sturdy metal frame, closed print chambers and heatbed that can be heated up to 120°C, the Creator Pro is extremely suitable for filaments that require high heatbed temperatures.

The printer is easy to operate with the clear LCD screen. In addition, it is possible to print directly from SD card, or directly from your PC via a USB connection. During printing, the print area can be illuminated with the built-in LED lighting.

The printer comes standard with Flashforge's FlashPrint software, but the printer is also compatible with other well-known slicing software.

Included with this printer:

2 spools of filament of any colour (1kg per spool)
Accessory and tool set
Acrylic cover set
4GB SD card with software and manual
USB cable

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	55 x 36 x 52.6 cm	Heatbed max temp:	120 °C
Input voltage:	100-240V	Max print depth:	22.7 cm
Nozzle diameter:	0.4 mm	Max print height:	15 cm
Power rating:	320 W	Max print volume:	5.039
Printer bed levelling:	manual	Max print width:	14.8 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	240 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DCP00049
Has CNC option:	no	Weight:	14.8 kg
Filament sensor:	yes

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€493.00 (coming soon)

€400.81 Excl. 23% VAT

Creality 3D Ender-5 Plus 3D Printer

Zoom in

Description With the Creality 3D Ender-5 Plus 3D printer kit you can easily and quickly build your own 3D printer. This model has a large print surface (350mm x 350mm x 400mm) and a clear 4.3 inch touchscreen with which you can operate the printer.

The heated print bed heats up quickly and heats up to a maximum of 110°C. The glass plate allows you to print as soon as they are ready. The print platform is very stable thanks to the double guide. Furthermore, you never have to worry about power outages again. This printer has a smart "Resume Print" function, which automatically resumes printing as soon as there is power again.

The Creality 3D Ender-5 Plus has automatic bed leveling with the BL Touch. This means that you no longer have to adjust the printer yourself and this is done completely automatically. Finally, the double Z-axis ensures firmness and a stable movement.

Included with this printer kit:

Accessories kit
Power cable
PLA test filament
Spare parts
Spatula
Nippers

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	61.9 x 63.2 x 66.6 cm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	35 cm
Nozzle diameter:	0.4 mm	Max print height:	40 cm
Nozzle type:	MK8	Max print volume:	49
Power rating:	550 W	Max print width:	35 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00031
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	18.2 kg
Filament sensor:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items
Assembly manual (video)

€493.00 (coming soon)

€400.81 Excl. 23% VAT

XYZprinting da Vinci Junior Pro X+ 3D Printer

Zoom in

Description The da Vinci Jr. Pro X+ 3D printer from XYZprinting is a reliable and versatile model. It gives you complete freedom in every creation process. In addition, the printer has useful functions and delivers high-quality 3D prints. The LCD screen provides user-friendly operation. There are two fans on the extruder that provide good cooling. This gives prints a smooth and beautiful surface.

This 3D printer has a maximum print temperature of 260°C and a build surface of 175mm x 175mm x 175mm. You can easily send print jobs via the wireless network. Thanks to the safety sensor, print jobs are automatically interrupted when the cover is open. The open filament system allows you to print with materials from other brands.

Specifications

Brand:	XYZprinting	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	80 °C
Dimensions:	38 x 42 x 43 mm	Max print depth:	17.5 cm
Input voltage:	100-240V	Max print height:	17.5 cm
Nozzle diameter:	0.4 mm	Max print volume:	5.359
Printer bed levelling:	automatic	Max print width:	17.5 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00082
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	13 kg
Heated bed included:	yes

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€495.00 (coming soon)

€402.44 Excl. 23% VAT

XYZprinting da Vinci 1.0 Pro 3D Printer

Zoom in

Description The da Vinci 1.0 Pro is a professional 3D printer that allows you to make detailed prints. This 3D printer comes with an aluminium print bed of 200mm x 200mm x 200mm. The print bed spreads heat quickly and evenly, so prints are less likely to warp. The print area ensures consistent and impressive print quality.

You can print with various filaments such as PLA, ABS, PETG and HIPS. You also connect wirelessly to the printer. You print in a resolution of 20 to 400 microns with a maximum speed of 120 mm/s. Thanks to the open filament system, you can also print with materials from other brands.

Specifications

Brand:	XYZprinting	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	90 °C
Dimensions:	51 x 46.8 x 55.8 mm	Max print depth:	20 cm
Input voltage:	100-240V	Max print height:	20 cm
Nozzle diameter:	0.4 mm	Max print volume:	8
Printer bed levelling:	automatic	Max print width:	20 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	240 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	12 v/°c
Camera included:	no	Our item no:	DKI00083
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	23 kg
Heated bed included:	yes

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Instructional video

€517.50 (coming soon)

€420.73 Excl. 23% VAT

Creality 3D CR-X Pro 3D Printer

Zoom in

Description The Creality 3D CR-X Pro is a dual-colour printer. It creates fantastic 3D prints with two filaments from one nozzle. This allows you to print with two different colours or two different filaments (for example with PLA and PVA).

The printer has a sleek design and the electronic components are well protected in a metal frame. In addition, this model has a auto bed level sensor and a silent motherboard with TMC2208 stepper drivers. With a print size of 300mm x 300mm x 400mm, you have plenty of room to let creative ideas run wild. The Z-axis is equipped with double screws, so that printing is very stable and precise. Thanks to the 480W Mean Well power supply, it quickly reaches the right temperature. Your creations will adhere well to the carborundum glass plate and are easy to remove. Use the two fans on the print head to instantly cool your 3D prints. Take a break while printing? That is possible with this model! You can save the printing process and resume it at a later time.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	650 x 550 x 400 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	40 cm
Nozzle type:	CRX	Max print volume:	36
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	bowden	No of extruders:	2
Extruder max temp:	250 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00053
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	15 kg

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€587.50 (coming soon)

€477.64 Excl. 23% VAT

Flashforge Adventurer 4 3D Printer

Zoom in

Description

Meet the Flashforge Adventurer 4 3D printer. It is the successor to the Flashforge Adventurer 3 and has a larger build area of 220mm x 200mm x 250mm. This 3D printer is suitable for use at home, in the office or at school.

The heated print bed quickly heats up to a maximum of 110°C. You can use this 3D printer in combination with PLA, ABS, PC, PETG, PLA-CF and PETG-CF filament. Thanks to the flexible build plate, you can quickly and easily remove 3D prints from the magnetic print bed. The nozzle heats up to 200°C within 60 seconds, so you can get started quickly. In addition, this printer has a built-in coil holder for up to 1kg and a handy filament detection sensor. Thanks to Ethernet and Wi-Fi, you can easily print remotely. You can monitor the printing process with the built-in camera.

The printer kit comes with the following:

Memory card
PLA filament
Accessories kit

Specifications

Brand:	Flashforge	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	110 °C
Dimensions:	54 x 50 x 47 cm	Max print depth:	22 cm
Input voltage:	100-240V	Max print height:	25 cm
Printer bed levelling:	semi-automatic	Max print volume:	11
Printer extruder:	bowden	Max print width:	20 cm
Extruder max temp:	265 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00074
Filament sensor:	yes	Weight:	20.1 kg
Heated bed included:	yes

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€613.00 (coming soon)

€498.37 Excl. 23% VAT

Flashforge Adventurer 4 Pro 3D printer

Zoom in

Description The Flashforge Adventurer 4 Pro 3D is the latest addition to the Adventurer series. The Plug and Print 3D printer is delivered assembled and can be used immediately. This compact printer with a build volume of 220mm x 200mm x 250mm easily prints larger objects. The Adventurer 4 Pro also has auto-leveling at 30 points, which makes the printing process easier. Very suitable for private and educational users.

This 3D printer is equipped with:

Extruder upgrade
- 3 fans and two-way air ducts for better cooling
Flexible building board with PEI coating
HEPA 13 air filter

What sets the Adventurer 4 Pro apart from its predecessors is that the print speed is 4x faster. This makes it easy to create intricate or large prints in a fraction of the time an Adventurer 4 would. It also prints with a noise level of up to 50db, which is quieter than most printers. The printer is equipped with a heated bed that allows you to effortlessly print different materials, such as PLA, ABS and PETG. A filament sensor indicates when the filament is empty and pauses the print. The built-in camera makes it possible to monitor the progress of your prints.

The 3D printer works with the FlashPrint 5 software and other common slicers (Cura, PrusaSlicer, Simplify3D, etc.) and can be connected to Wi-Fi. The 3D model can be easily printed using a USB stick. Operation is easy via the touchscreen display with a clear and intuitive interface.

The printer kit comes with the following:

0.4mm-240℃ high speed nozzle & 0.6mm-265℃ high strength nozzle
2 pipe connections
power cable
USB
Tools such as a plunger tool, screwdriver & Allen key
Leveling map

Specifications

Brand:	Flashforge	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	110 °C
Dimensions:	54 x 50 x 47 cm	Max print depth:	22 cm
Input voltage:	100-240V	Max print height:	25 cm
Printer bed levelling:	automatic	Max print volume:	11
Printer extruder:	bowden	Max print width:	20 cm
Extruder max temp:	265 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00171
Filament sensor:	yes	Weight:	20.1 kg
Heated bed included:	yes

€699.00 (coming soon)

€568.29 Excl. 23% VAT

AnkerMake M5 3D Printer

Zoom in

Description The Ankermake M5 3D printer can print up to 5 x faster than with comparable printers. This saves you time and energy. The printer has a die-cast aluminum frame that makes it easy to install and has a stable structure that enables accurate printing at high speed (250mm/s).

The M5 has a built-in AI camera. With this camera, printing errors are detected in time and reported, so that timely intervention is possible. You can also watch live via the camera and recordings can be made, such as 1080p Full HD timelapses. In addition, the camera is equipped with IR LEDs for night vision.

The print volume of this 3D printer is 235mm x 235mm x 250mm. Due to the scratch-resistant magnetic PEI print surface, prints can be easily detached. Adjusting the print bed is also easy thanks to the 7x7 auto bed leveling function.

The operation of the printer is quick and easy via the 4.3” touchscreen, but print jobs can also be started via the PC or smartphone. In addition, the status of the print job can be requested via Amazon Alexa. Thanks to the Ultra-Direct Extruder with Multi-Stage Gear Ratio transmission, the 60-watt heating element and the double part cooling, PLA , PETG , ABS and Flexible filament can be printed efficiently.

Specifications

Brand:	AnkerMake	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	47 x 50.2 x 43.8 cm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	23.5 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	MK8	Max print volume:	13.806
Printer bed levelling:	automatic	Max print width:	23.5 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00162
Has CNC option:	no	Weight:	12.6 kg
Filament sensor:	yes

€723.00 (coming soon)

€587.80 Excl. 23% VAT

Creality 3D CR-5 Pro high temperature 3D Printer

Zoom in

Description

This CR-5 Pro H is a plug-and-print 3D printer from Creality. This reliable model is ideal for both personal and professional use. What makes this printer different from its predecessor (Creality CR-5 Pro)? The heat resistance! This model can withstand temperatures of up to 300°C thanks to the powerful fan and excellent heat dissipation.

This single extruder 3D printer has an extra large print volume of 300mm x 225mm x 380mm. The stable metal frame ensures accurate and high-quality 3D prints. The renewed Bowden extruder ensures a smooth and reliable filament supply and is equipped with a nozzle with a maximum temperature of 300°C. The high-quality heated bed (with carborundum glass) and the powerful fan ensure excellent heat dissipation. This makes the CR-5 Pro H suitable for almost any filament type.

The 3D printer has the following features:

Extra quiet printing thanks to the ATMEGA 2560 master chip.
Printing in very high temperatures.
Automatic levelling with the BLTouch.
Automatically resume printing after power failure.
Filament detection sensor.
Aluminium heated bed with a glass print bed.
MeanWell power supply.
Led lamps.
4.3" touchscreen for easy operation.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	61.2 x 53 x 48.7 cm	Heatbed max temp:	110 °C
Input voltage:	230CV	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	38 cm
Nozzle type:	MK8	Max print volume:	25.65
Printer bed levelling:	automatic	Max print width:	22.5 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00058
Has CNC option:	no	Weight:	32.5 kg
Filament sensor:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€550.90 (coming soon)

€447.89 Excl. 23% VAT

Creality 3D CR-30 Printmill 3D Printer

Zoom in

Description The Creality CR-30 Printmill is the world's first Creality 3D printer with a special conveyor belt that creates an infinite Z-axis. The conveyor belt ensures your prints last as long as you want. You can count on high productivity and time savings: the rotating, wear-resistant belt moves your complete print so that the printer can already start on the next one. This makes mass production easy.

But that's not the only special thing about this 3D printer. With a solid XY core structure and triangular shape, you can enjoy a stable, effective printing experience. The nozzle maintains an angle of 45°, eliminating the limitations of a vertical nozzle structure. You also benefit from the quiet main board and the fans.

The 3D printer is optimised and has built-in extras. If the voltage is accidentally lost, the print can easily be resumed as soon as the power is back on. A smart sensor has also been thought of, which detects it immediately if the filament is used up or breaks. The printer will then stop and automatically resume printing as soon as new filament is fed.

Finally, the Printmill is equipped with exclusive, user-friendly printer software and handy slicer software, called Crealitybelt.

Click here for a video explanation of the assembly.
Click here for a video explanation about levelling.
Click here for a video explanation about maintenance.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Safety datasheet:	Extra information	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	41 x 53.5 x 65.6 cm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	999 cm
Nozzle diameter:	0.4 mm	Max print height:	17 cm
Nozzle type:	MK8	Max print volume:	339.66
Power rating:	350 W	Max print width:	20 cm
Printer bed levelling:	manual	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	240 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00051
Camera included:	no	Weight:	16.5 kg
Has CNC option:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€869.00 (coming soon)

€706.50 Excl. 23% VAT

Snapmaker 2.0 F250 3D Printer

Zoom in

Description The Snapmaker 2.0 F250 printer is a modular 3D printer with a large construction area of 230mm x 250mm x 235mm. The magnetic heated bed is equipped with a removable print sheet, so that the prints are easy to remove. The cooling system has been upgraded to combine speed and accuracy. This allows you to print very quickly without the quality of the prints deteriorating. With an average noise of 50 dB(A), the printer is very quiet, so you can also place it next to you to monitor the print in real time. In addition, the printer is equipped with a 5" smart touchscreen.

With this printer you get everything you need to start with 3D printing, but you can also expand the printer with various Snapmaker modules or addons for a personal touch.

Specifications

Brand:	Snapmaker	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	49 x 40.5 x 42.4 cm	Max print depth:	23 cm
Input voltage:	100-240V	Max print height:	23.5 cm
Printer bed levelling:	automatic	Max print volume:	13.512
Printer extruder:	direct	Max print width:	25 cm
Extruder max temp:	275 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00092
Filament sensor:	yes	Weight:	20.6 kg
Heated bed included:	yes

Order filament

Snapmaker 2.0 A250 double-sided magnetic 3D printing platform voor €25.50

Extra Information

3D Filament
Print bed accessories
Cleaning items

€627.90 (coming soon)

€510.49 Excl. 23% VAT

Snapmaker J1 3D Printer

Zoom in

Description Snapmaker's J1 is an easy-to-use 3D printer with an ultra-fast print speed. The device has a print speed of 350 mm/s and an acceleration of up to 10000 mm/s². Thanks to the copy and mirror mode, you can significantly double your productivity. The breakaway and dissolvable mounts make for effortless removal. Print jobs are easily initiated via the intuitive 5-inch touchscreen. With this 3D printer you can print objects with nylon, reinforced nylon, PC, TPU and PA-CF filament. The Snapmaker J1 features an independent dual extruder (IDEX).

Specifications

Brand:	Snapmaker	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	464 x 539 x 401 mm	Max print depth:	20 cm
Input voltage:	100-240V	Max print height:	20 cm
Printer bed levelling:	manual	Max print volume:	12
Printer extruder:	direct	Max print width:	30 cm
Extruder max temp:	300 °C	No of extruders:	2
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00144
Filament sensor:	yes	Weight:	25 kg
Heated bed included:	yes

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€997.00 (coming soon)

€810.57 Excl. 23% VAT

XYZprinting da Vinci Colour Mini 3D Printer

Zoom in

Description The da Vinci Colour Mini is a professional full-colour 3D printer. It prints objects and colours them with PLA filament. This makes endless colour variations possible!

The printer has a stylish black design and weighs only 24.5kg. Thanks to its compact design, this item fits easily on your desk. Connect wirelessly to the printer and send remote jobs. You create 3D prints in a format of 130mm x 130mm x 130mm at a speed of 170mm/s. The colour touchscreen provides user-friendly operation. The automatic print bed calibration ensures even faster prints. Thanks to the NFC chip, the material profile is automatically set and you know how much filament is left.

Specifications

Brand:	XYZprinting	Heated bed included:	no
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	541 x 507 x 447 mm	Heatbed max temp:	0 °C
Input voltage:	100-240V	Max print depth:	13 cm
Nozzle diameter:	0.4 mm	Max print height:	13 cm
Power rating:	240 W	Max print volume:	2.197
Printer bed levelling:	automatic	Max print width:	13 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	250 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00090
Has CNC option:	no	Weight:	24 kg
Filament sensor:	no

Extra Information

3D Filament
Print bed accessories
Cleaning items

€805.00 (coming soon)

€654.47 Excl. 23% VAT

Cubicon 3D Optimus C23Z 3D Printer

Zoom in

Description The Cubicon Optimus is a housed FDM printer with a build volume of 230mm x 210mm x 300mm. The printer uses a Direct Drive Extruder and has a built-in auto bed level function. For improved Z-axis stability, the printer uses two lead screws and four vertical axes. Control is via a 5 inch LCD color touchscreen and you can load models via Wi-Fi or USB port.

The Hotend has a maximum temperature of 260°C and the heated bed can be heated to 110°C. Nozzles are easy to replace and the housing has a built-in air filter. The printer is also equipped with a power outage recovery function that allows you to resume printing after a power failure.

Specifications

Brand:	Cubicon	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	58 x 48 x 48 cm	Max print depth:	23 cm
Input voltage:	100-240V	Max print height:	30 cm
Printer bed levelling:	automatic	Max print volume:	14.49
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	260 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00106
Filament sensor:	yes	Weight:	30 kg
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€836.50 (coming soon)

€680.08 Excl. 23% VAT

Snapmaker J1s 3D Printer

Zoom in

Description The Snapmaker J1s 3D printer is an ultra-fast and easy-to-use 3D printer that offers everything you need to start printing quickly. The J1s has a print speed of 350 mm/s and an acceleration of up to 10,000 mm/s².

Be more productive
The independent dual extruder (IDEX) makes it possible to print soluble or easy-to-break supports that can be easily removed later. Copy and mirror mode helps you be more productive. After printing, simply remove the model from the glass, double-sided PEI build plate.

Many different materials
This direct drive 3D printer has hot ends that can handle up to 300℃ and a heated bed of 100℃. This also allows materials such as PC, Nylon/PA and TPU to be printed effortlessly. The built-in nozzle sweeper ensures that the nozzle always remains clean, preventing blockages.

Other specifications
You can easily operate the J1s via the intuitive 5-inch touchscreen. The enhanced cooling system regulates the ambient temperature inside the printer and provides cooling during high-speed printing. Due to the sturdy housing of the printer, the expected lifespan is more than 10 years.

Differences between the Snapmaker J1 and the J1s:

The J1s has an additional fan and the top panel does not need to be removed to print with PLA.
The doors and side panels are already installed on the J1s, so you can start right away.
If you would like to purchase a J1 model and you need extra cooling, you can choose a J1 with an upgrade kit or a J1s.

Specifications

Brand:	Snapmaker	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	464 x 539 x 401 mm	Max print depth:	20 cm
Input voltage:	100-240V	Max print height:	20 cm
Printer bed levelling:	manual	Max print volume:	12
Printer extruder:	direct	Max print width:	30 cm
Extruder max temp:	300 °C	No of extruders:	2
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00173
Filament sensor:	yes	Weight:	25 kg
Heated bed included:	yes

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€1,475.00 (coming soon)

€1,199.19 Excl. 23% VAT

Snapmaker 2.0 A350T Modular 3-in-1 3D Printer & enclosure

Zoom in

Description This bundle consists of a Snapmaker 2.0 A350T 3-in-1 printer, and the housing. The printer is fully modular, making it possible to quickly and easily switch between modules for 3D printing, CNC milling, laser engraving and laser cutting. The frame of the printer is made of aluminium and very stable.

The A350T has a print volume of 320mm x 350mm x 330mm and is equipped with a 5-inch touchscreen with WiFi capabilities. This allows you to easily import designs and settings, for example from Snapmaker Luban, Snapmaker's 3-in-1 printing software.

In addition, the printer and the various modules have the following properties:

3D printer with auto-leveling
Filament recovery for stopping printing process when spool is empty
Power loss recovery for resuming printing process after power failure
1600 mW laser for engravings in wood, leather and plastic
CNC module for 6000 - 12.000 RPM and bits from 0.5 - 6.35mm

The housing combines a robust aluminium frame with acrylic panels and folding doors. The housing is also dust-proof and equipped with an extraction system. The laser or CNC process is also automatically stopped when one of the folding doors is opened. As a result, the housing keeps the temperature stable during 3D printing, makes laser engraving a lot safer, and stops the dust and noise that is released during CNC milling. The housing of the A350T measures 626mm x 820mm x 603mm.

Specifications

Brand:	Snapmaker	Has laser option:	yes
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	80 °C
Dimensions:	58 x 49.5 x 50.6 cm	Max print depth:	32 cm
Input voltage:	100-240V	Max print height:	33 cm
Printer bed levelling:	automatic	Max print volume:	36.96
Printer extruder:	direct	Max print width:	35 cm
Extruder max temp:	275 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	yes	Our item no:	DKI00095
Filament sensor:	yes	Video promo:	Promotional video
Heated bed included:	yes	Weight:	44.8 kg

Order filament

Poplar wood plates, 300mm x 300mm x 4mm (5-pack) for €37.50

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€1,575.00 (coming soon)

€1,280.49 Excl. 23% VAT

Dremel Digilab 3D45 3D Printer

Zoom in

Description Unleash your creativity with the Dremel Idea Builder 3D45-02 3D printer. Suitable for both beginners and experts!

With this plug-and-print 3D printer you can start printing immediately. You will not receive a complicated DIY kit, but a complete 3D printer that is ready for use! In addition, thanks to the built-in HD camera and Wi-Fi connectivity, you can start and monitor your print remotely. No computer at your disposal? Then you can also start your 3D print via the supplied USB stick with slicer software.

The Dremel 3D45-02 has a medium print area of 25.4cm x 15.2cm x 17cm and an excellent layer resolution of 50 microns for extremely detailed prints. In addition, the closed construction and heated bed reduce the risk of warping of large objects. This 3D printer is equipped with a semi-automated bed levelling function and one extruder. Suitable for prints of PLA, Nylon, Eco-ABS and PETG filament with a diameter of 1.75mm.

This FFF 3D printer comes with:

1x Dremel 3D Eco-ABS filament in black
1x Dremel 3D PETG filament in transparent
1x USB cable
1x USB stick with slicer software
1x Power cable
1x Object removal tool
1x Glue stick for improved bed adhesion
1x Cleaning tool

TIP: Make sure you don't run out of material and order filament in different colours right away!

Specifications

Brand:	Dremel	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	100 °C
Dimensions:	404 x 406 x 645 mm	Max print depth:	25.4 cm
Input voltage:	230CV	Max print height:	17.7 cm
Printer bed levelling:	semi-automatic	Max print volume:	6.834
Printer extruder:	direct	Max print width:	15.2 cm
Extruder max temp:	280 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	12 v/°c
Has CNC option:	no	Our item no:	DCP00172
Filament sensor:	yes	Weight:	19.4 kg
Heated bed included:	yes

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€1,775.00 (coming soon)

€1,443.09 Excl. 23% VAT

XYZprinting da Vinci Super 3D Printer

Zoom in

Description With the da Vinci Super 3D printer from XYZprinting you can create large format prints. You can print objects with dimensions of 300mm x 300mm x 300mm and a speed of 180mm/s. The extruder prints at temperatures up to a maximum of 260℃ and you can easily heat the print bed up to 100℃.

Stick to traditional filaments such as ABS, PLA and PETG or opt for special materials such as nylon, TPE and HIPS: the possibilities are endless! This printer stores your last print layer, so you don't have to worry about unexpected power failures. You simply resume the printing process afterwards. In addition, if you pause the printing process, you can easily change the colour of the filament during the process. The open filament system allows you to print with materials from other brands.

Specifications

Brand:	XYZprinting	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	73.3 x 60.4 x 60.5 mm	Max print depth:	30 cm
Input voltage:	100-240V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	27
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00084
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	35.5 kg
Heated bed included:	yes

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€1,875.00 (coming soon)

€1,524.39 Excl. 23% VAT

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Filament 3D Printers

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Filament 3D Printers