Buy 3D printers, filament, parts & tools | lowest prices

Original Prusa XL Semi-Assembled, Single-toolhead 3D printer

Description With the Original Prusa XL you can easily make large 3D prints. This printer has a large construction volume of 360mm x 360mm x 360mm, so you no longer have to print large prints in multiple parts. The Original Prusa XL comes semi-assembled, so you have to partly assemble it yourself.

Possibility to expand
Easily expand this 3D printer with additional print heads to work with multiple colors and materials at the same time. You can connect up to 5 print heads at the same time and easily switch between them. Use multiple colors or print the supports with a soluble filament: endless possibilities.

Other functionalities
Thanks to the 32-bit MCU, input shaper and 'pressure advance', super-fast printing is possible. The Nextruder ensures that the first layer is always printed perfectly, even when printing with multiple print heads. This ensures you of a good basis for your 3D prints. For better quality and reliability during printing, this 3D printer has a modular, segmented heatbed. Because the 16 tiles of the heatbed can be controlled individually, the bed can be precisely adapted to your model. You can easily operate the Original XL 3D printer via the Prusa Connect network or offline.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00265
Has CNC option:	no	Variant:	Semi-Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

Order now, we can ship this on Monday!

€2,049.00

€1,665.85 Excl. 23% VAT

In stock

Original Prusa XL Assembled, Single-toolhead 3D printer

Zoom in

Description Create large, fantastic 3D prints with the Original XL 3D printer from Prusa. The Original Prusa XL has a construction volume of no less than 360mm x 360mm x 360mm, making it easy to make larger prints in one go. This printer comes fully assembled, so you no longer have to assemble it yourself and you can immediately start making 3D prints.

Possibility to expand
Would you like to work with multiple materials or colors in one print? Then you can expand this printer with additional print heads. Connect up to 5 print heads and easily switch between them. Use multiple colors or print your supports with a soluble filament: the possibilities are endless.

Other functionalities
The 32 bit MCU, input shaper and pressure advance ensure super-fast printing. In addition, the Nextruder ensures that a perfect first layer is always printed, even when working with multiple print heads. This ensures you have a good basis for your 3D prints. The modular segmented heatbed improves quality and reliability during printing. The 16 tiles of the heatbed can be controlled individually and thus precisely adapted to your model. You can easily operate the Original XL 3D printer via the Prusa Connect network or offline.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00264
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Order now, we can ship this on Monday!

€2,349.00

€1,909.76 Excl. 23% VAT

In stock

Original Prusa XL Semi-assembled 2-toolhead 3D Printer

Zoom in

Description The Original Prusa XL is a unique large-scale CoreXY 3D printer with a build volume of 36cm×36cm×36cm (14.17''×14.17''×14.17'') and an optional toolchanger to operate up to 5 independent toolheads. This allows you to print massive objects quickly and with little to no waste.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00276
Has CNC option:	no	Variant:	Semi-Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Order now, we can ship this on Monday!

€2,499.00

€2,031.71 Excl. 23% VAT

In stock

Original Prusa XL Assembled 5-toolhead 3D Printer

Zoom in

3
2
1
0

Description

Introducing the Original Prusa XL Assembled 5-toolhead 3D Printer, the ultimate solution for multi-material and multi-color 3D printing. Fully assembled and ready to use right out of the box, this advanced printer features five independent toolheads, enabling complex and precise prints with ease. Its large build volume and top-tier components ensure exceptional print quality and reliability, making it perfect for both professional and enthusiast applications. Experience the convenience of a pre-assembled machine combined with the innovation and performance that Prusa is renowned for. Transform your 3D printing projects with the Original Prusa XL’s cutting-edge technology and superior craftsmanship.

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	720 x 700 x 900 mm	Max print depth:	36 cm
Input voltage:	230CV	Max print height:	36 cm
Nozzle diameter:	0.4 mm	Max print volume:	46.656
Printer bed levelling:	automatic	Max print width:	36 cm
Printer extruder:	direct	No of extruders:	5
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00274
Has CNC option:	no	Variant:	Assembled
Filament sensor:	yes	Weight:	27.9 kg
Heated bed included:	yes

No of extruders:

Variant:

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

Order now, we can ship this on Monday!

€3,999.00

€3,251.22 Excl. 23% VAT

In stock

Creality 3D Ender 3 V3 Plus

Zoom in

1
0

Description Bring your creative ideas to life with the Ender 3 V3 Plus 3D printer from Creality. With the large construction volume of 300mm x 300mm x 330mm you can print life-size objects in one go or print several small objects in one go. It is also possible to print up to 600mm/s with the CoreXZ system. You can easily assemble the printer, making it easy to use even for novice users. Thanks to the automatic calibration, your build plate is always perfectly level, without having to put in any extra effort yourself.

Powerful and stable performance
The Ender 3 V3 Plus delivers fantastic performance due to its reliable and robust clog-free extruder. The printer has a simple quick swap tri-metal nozzle, so you can change it easily and quickly. In addition, the 60W hotend heater ensures smooth extrusion at full power. The part cooling fans at the front and back cool the newly printed part quickly and evenly, making dripping and deformation a thing of the past. Thanks to the two powerful motors on the y-axis, the print bed is moved quickly and stably, even when larger and heavier 3D prints are made. The z-axis has 2 supporting beams on the side, making it less vibrating and very accurate. Easily print different materials such as PLA, ABS, PETG, PLA-CF and the flexible TPU (95A).

User friendly
The new metal design is very stable and takes up significantly less space than other printers with the same build volume. This makes this printer a perfect fit for almost any setup. The Ender 3 V3 Plus has two different speed modes, including a silent mode with a noise level of ≤55 decibels. The handy 800px x 480px touchscreen shows you all the information you need, such as a preview of the model and its progress. The flexible, textured build plate ensures that 3D models remain in place during printing and that they can be easily removed afterwards. Finally, you can easily connect the printer to a LAN connection or WiFi.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	WiFi	Has laser option:	no
Dimensions:	577 x 410 x 445 mm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	100 °C
Nozzle diameter:	0.4 mm	Max print depth:	30 cm
Nozzle type:	M6H23	Max print height:	30 cm
Power rating:	350 W	Max print volume:	27
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00258
Has CNC option:	no	Weight:	11.5 kg

€399.00

€324.39 Excl. 23% VAT

€519.00 Creality3D rrp

EU warehouse

Anycubic Kobra 3 Max 3D printer

Zoom in

1
0

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420mm x 420mm x 500mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600mm/s and an acceleration of 10,000mm/s², you never have to wait long for your 3D prints to be ready.

User friendly
The LeviQ 3.0 automatic leveling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolour 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can continue your 3D print after a power failure, so it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60˚C. The hotend can heat up to a temperature of 300˚C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	90 °C
Dimensions:	753 x 706 x 640 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print height:	50 cm
Nozzle diameter:	0.4 mm	Max print volume:	88.2
Power rating:	300 W	Max print width:	42 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	no	Our item no:	DKI00315
Has CNC option:	no	Variant:	Without ACE Pro
Filament sensor:	yes	Weight:	19 kg
Heated bed included:	yes

€459.00

€373.17 Excl. 23% VAT

EU warehouse

Anycubic Kobra 3 Max Combo 3D printer

Zoom in

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420mm x 420mm x 500mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600mm/s and an acceleration of 10,000mm/s², you never have to wait long for your 3D prints to be ready. This combo also comes with an Ace Pro multi-material system.

Ace Pro
Thanks to the Ace Pro, you can 3D print with 4 colours or materials at the same time. By connecting an extra unit, this number can even be increased to 8. Changing spools will be fully automatic, allowing you to spend time on other things. The intelligent drying function of the Ace Pro makes it possible to dry filament, both before and during printing. This will make your 3D prints of even higher quality. In addition, the Ace Pro can automatically switch to a new spool of the same colour when the old one is empty and the printing is paused when blockages or filament tangles are detected.

User friendly
The LeviQ 3.0 automatic levelling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolour 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can resume your 3D print after a power failure, so that it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60˚C. The hotend can heat up to a temperature of 300˚C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	90 °C
Dimensions:	753 x 706 x 640 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print height:	50 cm
Nozzle diameter:	0.4 mm	Max print volume:	88.2
Power rating:	300 W	Max print width:	42 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	no	Our item no:	DKI00316
Has CNC option:	no	Variant:	With ACE Pro
Filament sensor:	yes	Weight:	23.6 kg
Heated bed included:	yes

€599.00

€486.99 Excl. 23% VAT

EU warehouse

Creality 3D K2 Plus 3D printer

Zoom in

1
0

Description Create fantastic 3D prints with the K2 Plus 3D printer from Creality. This printer has a build volume of no less than 350mm x 350mm x 350mm, allowing you to easily create large 3D prints. The maximum print speed is up to 600mm/s with an acceleration of 30,000mm/s². Thanks to the active print chamber heating, the chamber is heated to 60˚C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed levelling and a 4.3 inch colour touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty and the filament tangle sensor gives a notification when the filament is tangled.

Other functionalities
The K2 Plus comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you don't have to worry about toxins and unpleasant odours. You can send files via Ethernet, WiFi or with a USB stick.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	72.5 x 49.5 x 51.5 cm	Max print depth:	35 cm
Input voltage:	110-220V	Max print height:	35 cm
Nozzle diameter:	0.4 mm	Max print volume:	42.875
Printer bed levelling:	automatic	Max print width:	35 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	350 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00331
Has CNC option:	no	Variant:	Without CFS
Filament sensor:	yes	Weight:	38.5 kg
Heated bed included:	yes

€1,099.00

€893.50 Excl. 23% VAT

EU warehouse

Kywoo 3D Tycoon Max 3D Printer

Zoom in

Description The Kywoo Tycoon Max 3D printer is a Cartesian FDM 3D printer. The printer is the enlarged version of the Kywoo Tycoon and has a maximum build volume of 300mm x 300mm x 230mm. The print head is equipped with a direct drive kit and autolevel is built in from the factory. A handy feature of the Tycoon Max is that files are easily transferred through a WiFi connection.

Thanks to the filament runout sensor and the print resume function, the risk of a failed print is significantly reduced. The printer is easy to control via a 3.5-inch HD colour screen. The ergonomic interface can set the printer to five different languages (EN-FR-DE-SP-IT).

Specifications

Brand:	Kywoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	no
Network:	WiFi	Heatbed max temp:	110 °C
Dimensions:	475 x 485 x 525 mm	Max print depth:	30 cm
Input voltage:	115-230V	Max print height:	32 cm
Nozzle diameter:	0.4 mm	Max print volume:	28.8
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00127
Has CNC option:	no	Weight:	12.3 kg
Filament sensor:	yes	XY precision:	0.1 mm
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€487.00 30% discount:

€340.90

€277.15 Excl. 23% VAT

EU warehouse

Creality 3D CR-200B Pro 3D printer

Zoom in

Description The Creality 3D CR-200B Pro is a 3D printer with a print volume of 200mm x 200mm x 200mm and a fully enclosed housing. Thanks to this housing, your prints are less affected by external factors and you can print more accurately. The parts are resistant to high temperatures, making it possible to work with many different materials, including ABS. The 3D printer is delivered almost fully assembled: within a few minutes you have placed the few loose parts and you can adjust the settings to your preference.

The Creality 3D CR-200B Pro distinguishes itself with the simplicity of installation and assembly, the 'Sprite' Direct Extruder with which very precise and constant filament is fed, the PC Spring steel print bed and the CR-Touch process with which the print bed automatically calibrates. In addition, you can easily print with the CR-200B Pro thanks to Cloud Printing.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	50.3 x 41.1 x 43.5 cm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	20 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer bed levelling:	automatic	Max print volume:	8.8
Printer extruder:	direct	Max print width:	20 cm
Extruder max temp:	260 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00158
Filament sensor:	yes	Weight:	16.5 kg

€493.00

€400.81 Excl. 23% VAT

EU warehouse

Flsun T1 Delta 3D printer

Zoom in

2
1
0

Description The Flsun T1 is an ultra-high speed 3D printer with a maximum speed of no less than 1000mm/s. The acceleration of 30000mm/s² and the maximum flow rate of 90mm³/s help this printer to achieve this speed. The frame is made entirely of metal to ensure stable printing at this speed. This super-fast printer has a powerful stepper motor with unparalleled precision and a CPAP turbofan provides cooling at 30,000 rpm. Easily print PLA, PETG, ABS and more thanks to the closed housing.

Smart assisted system
This printer uses a smart-assisted system, allowing you to make excellent quality prints. For example, the auto-bed levelling and vibration compensation ensure that the layer lines of your project can be printed perfectly. The power loss function makes it possible to resume your print after a power failure, without your print failing or having to start over. The filament detection closely monitors the status of the filament and stops the print if a problem is detected.

Useful functions
The Flsun T1 is equipped with a HEPA and carbon filter, which filters the air as best as possible. In addition, the printer automatically goes into sleep mode when it has not been used for a while and the printer will automatically stop heating once the print is finished. The built-in camera is ideal for monitoring your print in real time or for making timelapses.

Other functionalities
The construction volume is 260mm x 330mm and the maximum bed temperature is 110℃. The dual gear direct drive extruder is ultra-lightweight and has a nozzle that can handle a maximum of 300℃. Finally, this printer works with the familiar Flsun OS.

Specifications

Brand:	Flsun	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	836 x 436 x 490 mm	Heatbed max temp:	110 °C
Input voltage:	110-240V	Max print depth:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	33 cm
Printer bed levelling:	automatic	Max print volume:	17.52
Printer extruder:	direct	Max print width:	26 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00219
Filament sensor:	yes	Weight:	16.8 kg

€599.00

€486.99 Excl. 23% VAT

EU warehouse

Flsun T1 Delta 3D printer + Silent module

Zoom in

2
1
0

Description The Flsun T1 is an ultrahigh speed 3D printer with a maximum speed of 1000 mm/s. The acceleration of 30000 mm/s² and the maximum flow rate of 90 mm³/s help this printer to reach this speed. The frame is made entirely of metal to be able to print stably at this speed. This super fast printer has a powerful stepper motor with unmatched precision and a CPAP turbofan provides cooling with 30,000 rpm. Easily print PLA, PETG, ABS and more thanks to the closed housing.

Included accessory
The Flsun T1 comes standard with the Flsun T1 Silent Module. This module ensures quieter operation of the printer, making the printing process more comfortable in noise-sensitive environments.

Smart-assisted system
This printer uses a smart-assisted system, which allows you to produce excellent quality prints. For example, the auto-bed leveling and vibration compensation ensure that the layer lines of your project can be printed perfectly. The power loss function allows you to resume your print after a power failure, without your print failing or having to start over. The filament detection accurately monitors the status of the filament and stops the print if a problem is detected.

Useful features
The Flsun T1 is equipped with a HEPA and carbon filter, which filters the air as well as possible. In addition, the printer automatically goes into sleep mode when it has not been used for a while and the printer will automatically stop heating when the print is finished. The built-in camera is ideal for monitoring your print in real time or for making timelapses.

Other functionalities
The build volume is 260mm x 330mm and the maximum bed temperature is 110℃. The dual gear direct drive extruder is ultra-lightweight and has a nozzle that can handle a maximum of 300℃. Finally, this printer works with the trusted Flsun OS.

Specifications

Brand:	Flsun	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	836 x 436 x 490 mm	Heatbed max temp:	110 °C
Input voltage:	110-240V	Max print depth:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	33 cm
Printer bed levelling:	automatic	Max print volume:	17.52
Printer extruder:	direct	Max print width:	26 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00368
Filament sensor:	yes	Weight:	16.8 kg

€599.50

€487.40 Excl. 23% VAT

EU warehouse

Kywoo 3D Tycoon IDEX 3D Printer

Zoom in

Description The Kywoo Tycoon IDEX 3D Printer is a cartesian multi-material FDM printer. Thanks to the two print heads, the printer is able to process two different materials as well as two different colours in a print. The printer can operate in four different modes.

With the single print head mode, the printer offers a build volume of 260mm x 300mm x 350mm. When the printer operates with two print heads, the effective build volume is 220mm x 300mm x 350mm. In the third mode, one print head copies the work from the other. The work is therefore printed twice at the same time. The fourth mode is a mirror mode. In this one print head mirrors the work of the other.

The printer is controlled via an HD colour touchscreen with an ergonomic interface. The system can be set in five different languages. To increase the stability of the construction, the complete design consists of a double frame. All axles (XYZ) are also equipped with double drive and guides.

The use of photoelectric boundary switches instead of mechanical switches makes the printer calibration more accurate. To further increase the precision, slider blocks with linear rails have been chosen instead of a V-slot chassis. The slider blocks with linear rails provide a 30% increase in precision.

Specifications

Brand:	Kywoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	no
Network:	WiFi	Heatbed max temp:	110 °C
Dimensions:	760 x 671 x 514 mm	Max print depth:	26 cm
Input voltage:	110-240V	Max print height:	35 cm
Nozzle diameter:	0.4 mm	Max print volume:	27.3
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00126
Has CNC option:	no	Weight:	16 kg
Filament sensor:	yes	XY precision:	0.1 mm
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€637.00

€517.89 Excl. 23% VAT

EU warehouse

Creality 3D K1 Max 3D printer ⭐ Our choice for a fast and large printer

Zoom in

Description The Creality 3D K1 Max is an FDM 3D printer that is distinguished by its high printing speed and large build volume. The printer has a CoreXY structure and a lightweight print head that can reach speeds of up to 600 mm/s. The printer also has many smart features that simplify and improve the printing process. It has an AI LiDAR scanner that automatically scans the first layer and detects any errors. It also has an AI camera that monitors the print status and alerts you to any problems, such as spaghetti errors or foreign objects. It also has an RTC (real-time clock) that records the time accurately, even when the printer is turned off.

In addition, the K1 Max uses the smart Creality OS, which has a simple UI and synchronizes data and commands with PC, phone, cloud and add-on modules. The Creality 3D K1 Max is a versatile and powerful FDM 3D printer suitable for various projects and applications. It has a build volume of 300 x 300 x 300 mm, which is ideal for prototyping and design verification.

You can use the following filaments on the K1 Max:

PLA
ABS
PETG
TPU
PA
PC

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	work ethernet WiFi	Has laser option:	no
Dimensions:	52.6 x 43.5 x 46.2 cm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	120 °C
Nozzle diameter:	0.4 mm	Max print depth:	30 cm
Nozzle type:	-	Max print height:	30 cm
Power rating:	1,000 W	Max print volume:	27
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00164
Has CNC option:	no	Weight:	18 kg

€699.00

€568.29 Excl. 23% VAT

EU warehouse

Original Prusa MK4S 3D Printer Kit

Zoom in

3
2
1
0

Description Starting with 3D printing has never been easier! With automatic calibration, always-perfect first layer, one-click printing and many other useful features, the MK4S is the best choice for your home, workshop, or company. All print profiles and configurations are in-house tested ensuring that the MK4S effortlessly delivers top-quality 3D prints at a press of a single button from the very start.

With an optional enclosure (available also in bundle with printer) and multi-material upgrade, you can expand your experience as you go, and print with advanced materials or create beautiful multi-coloured prints!

Build area: 250mm × 210mm × 220mm (WxDxH)
Layer height: 0.05mm - 0.30mm
1.75mm filaments: Not vendor-locked
0.4mm nozzle: Easy-to-swap
Removable print sheets
Open-source community-friendly

Please note: This is a kit version and requires assembly

Specifications

Brand:	Prusa	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	120 °C
Dimensions:	400 x 500 x 550 mm	Max print depth:	21 cm
Input voltage:	230CV	Max print height:	22 cm
Nozzle diameter:	0.4 mm	Max print volume:	11.55
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	290 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00288
Has CNC option:	no	Variant:	Kit
Filament sensor:	yes	Weight:	7 kg
Heated bed included:	yes

€719.00

€584.55 Excl. 23% VAT

€819.00 Prusa rrp

EU warehouse

Creality 3D Sermoon D3 3D printer

Zoom in

Description With the Sermoon D3 from 3D Creality you get an advanced and super-fast 3D printer. The device allows you to create industrial objects of 300mm x 250mm x 300mm. This printer also makes detailed delicate prints with an accuracy of 0.1mm. This way you can easily create various objects of amazing quality. Microsteps of 1/256 are possible, allowing designs to be printed up to 5 times faster. Once your printer is connected to Wi-Fi or the Internet, you can easily print remotely. This way you can easily send print jobs from your PC with the Creality Print software or smartphone with the Creality Cloud app to the printer. Thanks to the built-in webcam, you can monitor the progress of your prints from a distance.

Batch print objects with multiple Sermoon D3 printers. Connect the printers to the internet and print your objects with the Creality Print software. Do you want to print a large object? Users can divide a model into small parts and print them with multiple printers. This 3D Creality printer is equipped with 2 built-in HEPA air filters so that toxic substances and PM0.3 particles are purified during printing. If the door is opened during printing, the safety sensor is activated. The printing process then pauses and the machine cools down quickly to protect you from burns.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	65.6 x 55.3 x 57.6 cm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	30 cm
Nozzle type:	MK8	Max print height:	30 cm
Printer bed levelling:	automatic	Max print volume:	22.5
Printer extruder:	direct	Max print width:	25 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00140
Filament sensor:	yes	Weight:	45 kg

€759.80 30% discount:

€531.86

€432.41 Excl. 23% VAT

EU warehouse

Creality 3D Ender-5 Max 3D printer

Zoom in

1
0

Description The Creality Ender-5 Max is a powerful CoreXY 3D printer with an impressive build volume of 400mm x 400mm x 400mm. With a print speed of up to 700mm/s and a robust, all-metal frame, this printer is ideal for both large projects and batch production. The automatic 64-point bed levelling and direct extruder ensure consistent, high-quality prints, even for complex models.

Key Features:

Huge build volume of 400mm x 400mm x 400mm for large or multiple prints simultaneously
Ultra-fast print speed up to 700mm/s with acceleration up to 20,000mm/s²
Supports various filaments such as PLA, PETG, TPU, ABS, ASA and more

NOTE: The printer is shipped on a pallet.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	85 x 64.9 x 72.1 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	40 cm
Nozzle diameter:	0.4 mm	Max print height:	40 cm
Power rating:	1,250 W	Max print volume:	64
Printer bed levelling:	automatic	Max print width:	40 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00350
Has CNC option:	no	Weight:	25.9 kg
Filament sensor:	yes

€789.50

€641.87 Excl. 23% VAT

EU warehouse

Original Prusa MK4 3D Printer KIT Self-assembly kit

Original Prusa MK4 3D Printer KIT DKI00231

Zoom in

3
2
1
0

Description A fully assembled version of the Original Prusa MK4 is also available via 123-3D.

Introducing the latest version of the 3D printing powerhouse from Prusa, the Original Prusa MK4. This powerful 3D printer includes all the safety and reliability features of its predecessor but also sports fast performance, allowing you to print more in less time.

New features include quick-swap nozzles, remote printing, one-click printing and a Loadcell sensor. This sensor ensures a consistently smooth first layer without the need for manual adjustment. The Original Prusa MK4 also prints up to 70% faster than the MK3 thanks to Pressure Advance and Input shaper technology.

The potential of this printer is supported by an impressively spacious build volume of 250 x 210 x 220mm, allowing you to print large-scale projects. Additionally, with a maximum heatbed temperature of 120°C and a maximum nozzle temperature of 290°C, the MK4 can work with PLA, ASA, PETG filament and more. Finally, the colour LCD screen with an intuitive UI supports QR codes and G-code thumbnails, for greater ease of use.

Please note: this product is a kit version of the Original Prusa MK4 and requires assembly.

Perfect for schools, universities and all educational environments.

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	400 x 500 x 550 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer bed levelling:	automatic	Max print volume:	11.55
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	290 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00231
Filament sensor:	yes	Weight:	7 kg

€914.50

€743.50 Excl. 23% VAT

EU warehouse

Creality 3D CR-M4 3D printer

Zoom in

Description Are you looking for a printer with which you can print really large objects? Then the Creality CR-M4 is the perfect printer for you. The CR-M4 has a huge build volume of 450mm x 450mm x 470mm and is equipped with CR-Touch 25 point auto bed leveling, all metal "Sprite" direct dual gear extruder and a vulcano style hotend.

Thanks to an 800 watt power supply combined with a 42-60 Y axis stepper motor, the CR-M4 can handle up to 30kg on the build plate. In addition, the construction of the CR-M4 is very robust thanks to the linear rails made of layered steel. You can easily connect to the CR-M4 using Wi-Fi, LAN, USB-C, RJ45 cable or via a micro SD card.

With the CR-M4 3D Printer you can print the following filaments:

PLA
PETG
ABS
TPU
Nylon

The printer comes with a standard tool kit (for assembly) and a test piece of PLA filament.

Tip : Do you want to get started with the 3D printer right away? Then it is wise to order a separate filament.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	865 x 655 x 700 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	45 cm
Nozzle diameter:	0.4 mm	Max print height:	47 cm
Printer bed levelling:	automatic	Max print volume:	95.175
Printer extruder:	direct	Max print width:	45 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00157
Filament sensor:	yes	Weight:	22.48 kg

€925.00

€752.03 Excl. 23% VAT

EU warehouse

Snapmaker 2.0 F350 3D Printer

Zoom in

Description The Snapmaker 2.0 F350 printer is a modular 3D printer with a very large construction area of 320mm x 350mm x 330mm. The magnetic heated bed is equipped with a removable print sheet, so that the prints are easy to remove. The cooling system has been upgraded to combine speed and accuracy. This allows you to print very quickly without the quality of the prints deteriorating. With an average noise of 50 dB(A), the printer is very quiet, so you can also place it next to you to monitor the print in real time. In addition, the printer is equipped with a 5" smart touchscreen.

With this printer you get everything you need to start with 3D printing, but you can also expand the printer with various Snapmaker modules or addons for a personal touch.

Specifications

Brand:	Snapmaker	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	80 °C
Dimensions:	58 x 49.5 x 50.6 cm	Max print depth:	32 cm
Input voltage:	100-240V	Max print height:	33 cm
Printer bed levelling:	automatic	Max print volume:	36.96
Printer extruder:	direct	Max print width:	35 cm
Extruder max temp:	275 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00093
Filament sensor:	yes	Weight:	24.2 kg
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€975.00 30% discount:

€682.50

€554.88 Excl. 23% VAT

EU warehouse

Flashforge Guider II 3D Printer

Zoom in

Description The Flashforge Guider II is a large format 3D printer and can handle various types of filament. With the large 5 inch colour screen, the printer is easy to operate and thanks to the 'resume printing' option, a print is automatically resumed after a power failure.

The printer features a large build volume, allowing you to give free rein to your creativity. Realise the most beautiful designs on an area of 280mm x 250mm x 300mm. Thanks to the heated print bed, you can experiment with filament types such as ABS and PLA. The innovative extruder with air circulation ensures neat and even prints.

FlashPrint software is used, which is ideal for both beginners and experts. Polar Cloud allows you to control the printer remotely. The Flashforge printer has the following connections: Wi-Fi, USB cable and USB stick.

Specifications

Brand:	Flashforge	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	56.1 x 49 x 54.9 cm	Max print depth:	28 cm
Input voltage:	100-240V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	21
Power rating:	500 W	Max print width:	25 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	240 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DCP00046
Camera included:	no	Weight:	30 kg
Has CNC option:	no	XY resolution:	11 um
Filament sensor:	yes	Z resolution:	2-5 um
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items
Instruction manual (video)

€1,047.00

€851.22 Excl. 23% VAT

EU warehouse

Original Prusa MK4 3D Printer

Zoom in

3
2
1
0

Description Introducing the Original Prusa MK4 3D printer, a powerful machine capable of creating high-quality prints with intricate details. The Prusa MK4 prioritises safety and durability and is great for both manufacturing and home use.

This 3D printer from Prusa means that high-speed printing is made effortless, as Pressure Advance and Input Shaper technology is included in the firmware of the MK4. This is used to accurately predict the filament’s flow and prevent any resonance in prints. Print time is thereby decreased by up to 70% when compared with the MK3.

With a build volume of 250 x 210 x 220mm, the expansive build area of the Original Prusa MK4 allows you to print large-scale projects without having to worry about running out of space.

Designed to prevent inconvenience, the precision of the Loadcell sensor, for example, enables you to print a smooth first layer consistently and automatically, without needing any input from the user.

Giving you even more flexibility when it comes to choosing what to 3D print, the Prusa MK4 supports an extensive range of filaments (PLA, PETG, ASA, flexible filament, Polycarbonate and Polypropylene).

Simple to use, the Original Prusa MK4 3D printer features a 3.5” graphic 65k colour screen with a user-friendly interface that supports QR codes. For added convenience, the footer panel of the display can even be customised. The RGB status bar allows you to be more in control of your prints too. The self-developed multiplatform slicer, PrusaSlicer, streamlines the slicing process, enabling you to get printing faster.

Perfect for schools, universities and all educational environments.

Specifications

Brand:	Prusa	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	400 x 500 x 550 mm	Heatbed max temp:	120 °C
Input voltage:	230CV	Max print depth:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Printer bed levelling:	automatic	Max print volume:	11.55
Printer extruder:	direct	Max print width:	21 cm
Extruder max temp:	290 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00230
Filament sensor:	yes	Weight:	7 kg

Did you know? We are an official Prusa reseller and provide Irish based warranty support for printers via 123-3D Ireland. All items are shipped to you from Ireland.

€1,237.00

€1,005.69 Excl. 23% VAT

EU warehouse

Anycubic Kobra 3 V2 (Combo) 3D printer

Zoom in

Description The Anycubic Kobra 3 V2 Combo combines lightning-fast 3D printing with impressive multi-colour functionality. Thanks to the included ACE Pro module, you can print up to 8 colours in a single model. Advanced features like AI detection, filament drying, and an integrated camera make this printer a powerful and versatile all-rounder.

Key Features:

Building volume: 255mm × 255mm × 260mm
Print speed: up to 600mm/s, recommended 300mm/s
Supported filaments: PLA, PETG, TPU, ABS, ASA, PA, PC, PP, HIPS

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	110 °C
Dimensions:	483 x 505 x 453 mm	Max print depth:	25.5 cm
Input voltage:	100-240V	Max print height:	26 cm
Nozzle diameter:	0.4 mm	Max print volume:	16.9
Power rating:	400 W	Max print width:	25.5 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	300 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	yes	Our item no:	DKI00396
Has CNC option:	no	Variant:	With ACE Pro
Filament sensor:	yes	Weight:	14 kg
Heated bed included:	yes

Variant:

With ACE Pro

Without ACE Pro

€329.00

€267.48 Excl. 23% VAT

EU warehouse

Creality 3D K1C 3D printer (2025 Edition)

Zoom in

Description The Creality K1C (2025 edition) is a blazing-fast, fully enclosed Core XY 3D printer with industrial-grade capabilities and ease of use for hobbyists and professionals alike. Thanks to its powerful metal hot end, AI camera, and air filter, it delivers high-quality prints on engineered materials with unmatched efficiency.

Key Features:

Maximum print speed up to 600mm/s for lightning-fast production
Fully enclosed Core XY structure + active air filtration for stable, safe prints
CFS Compatible

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	48 x 35.5 x 35.5 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	-	Max print volume:	12.1
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00397
Has CNC option:	no	Weight:	12.5 kg
Filament sensor:	yes

€399.00

€324.39 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00

Filament 3D Printers

Popular products