Buy 3D printers, filament, parts & tools | lowest prices

Anycubic Kobra 3 Combo 3D Printer Including Ace Pro

Description Bring the most colourful 3D prints to life with the Anycubic Kobra 3 Combo. This 3D printer comes with the Anycubic Ace Pro, which allows you to 3D print with up to 4 colours or types of filament at the same time. The Anycubic Ace Pro will automatically switch between colours or spools, allowing you to also use two spools of the same colour as a backup for each other.

Intelligent
The smart algorithm helps the Anycubic Ace Pro load the right filament within a minute. To prevent the filament from becoming tangled, it is guided through 4 different tubes to the extruder. There is also a constant check to see whether the filament has run out. If this is the case, the screen will provide a real-time reminder, so there is less chance of your print failing. In addition, the algorithm measures the pressure in the nozzle for smooth extrusion, layer by layer. With just the push of a button you can use the vibration compensation. This will make your prints much smoother. The Kobra 3 Combo can also easily resume printing after a power failure or running out of filament.

User friendly
This 3D printer is very easy to set up and is suitable for both beginners and advanced users. Use the automatic bed levelling to always have a perfectly level print bed. You can easily operate the printer with the touchscreen, which you can also rotate 30˚ to 60˚ for extra comfort. The nozzle goes up to 300˚C, making it suitable for many different types of filaments. In addition, it can be replaced easily and without tools. The 32 bit MCU has a silence sensor to reduce noise to a maximum of 50dB. This means you will not be bothered by noise pollution during printing.

Other functionalities
The Kobra 3 has a sturdy frame that is suitable for long-term stable printing, even at high speeds. The stylish design ensures that this printer fits well in almost any interior. With a construction volume of no less than 250mm x 250mm x 260mm and a maximum printing speed of 600mm/s, you can easily make 3D prints of different sizes. The cooling fan spins up to 7,000 rpm, so your 3D models are cooled quickly. The filament can be dried during 3D printing, so it is always in optimal condition for printing. In addition, the filament is also kept dry when you are not printing. Finally, you can easily control your 3D printer via the Anycubic app (Android & iOS)

Specifications

Brand:	Anycubic	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	483 x 505 x 453 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	26 cm
Power rating:	400 W	Max print volume:	16.25
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00263
Has CNC option:	no	Variant:	With ACE Pro
Filament sensor:	yes	Weight:	13.8 kg

€299.00 (coming soon)

€243.09 Excl. 23% VAT

€349.00 Anycubic3D rrp

Creality 3D CR-10 SE 3D printer

Zoom in

Description The Creality 3D CR-10 SE 3D printer brings out the creative in you. With a construction volume of 220mm x 220mm x 265mm, you have enough space to bring your ideas to life. This printer also has the option of high-speed printing with a maximum print speed of 600mm/s. The flexible PEI building plate ensures that you can easily remove your print when it is ready.

The perfect first layer
Choose convenience with the accurate hands-free bed levelling system that automatically adjusts the build plate. The CR Touch and a voltage sensor work together to level the build plate and set the z-offset. This makes it easy to get the perfect first layer. The first print layer of the CR-10 SE is sleek, sturdy and uniform. This way you take your print quality and success rate to a new level.

Better prints
The CR-10 SE uses advanced algorithms. The 'Input Shaping' significantly reduces the vibration of the printer, so you experience less ringing and ghosting. The 'Motion Advance' optimises the supply of filament so that there are fewer extrusion problems. It also has a dedicated fan to cool the just printed part of your model from 3 sides. This way you can print improved bridges and overhangs and details will look better. The linear rails on the x and y axes use ball bearings. These ensure that every movement is accurate and smooth. Even after prolonged use, they will continue to function optimally.

Different filaments
The hotend with 60W ceramic heater makes it possible to print without blockages. The hard steel nozzle gives you the option to print with many different types of filaments, such as PLA-CF, PA and HP-ASA. This Creality 3D printer has a 'Sprite' direct drive extruder with two gears. Filament feed and retraction are precise and uniform, even with flexible filaments.

Other functionalities
The CR-10 SE 3D printer can be monitored via your phone (using the Creality Cloud app) and via the PC. Use the printer in combination with the Creality Print slicer to get even more out of your printer. Multiple printers can be controlled simultaneously with both the Creality Cloud and Creality Print.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	work ethernet WiFi	Has laser option:	no
Dimensions:	62.5 x 49 x 47 cm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	110 °C
Nozzle diameter:	0.4 mm	Max print depth:	22 cm
Nozzle type:	MK8	Max print height:	26.5 cm
Power rating:	350 W	Max print volume:	12.826
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00199
Has CNC option:	no	Weight:	6.9 kg

€309.00 (coming soon)

€251.22 Excl. 23% VAT

Creality 3D Ender 3 V3 3D printer

Zoom in

2
1
0

Description You can get started with your Creality 3D Ender 3 V3 3D printer within 10 minutes. With this printer you choose a stable and fast 3D printer. The metal frame has die-cast parts, making this 3D printer extra stable. The CoreXZ technology ensures that the 3D printer can easily achieve speeds of 600mm/s.

Reliable extrusion & powerful cooling
Thanks to the reliable, clog-free extruder kit, this 3D printer can deliver exceptional performance. For a firm grip on the filament, the direct-drive extruder of the Ender 3 V3 is reinforced with a support spring and a ball control. The 60W ceramic heater can heat up to a maximum of 300°C within 75 seconds. This means that filaments that work with high temperatures, such as ABS and PETG, can be printed without problems. In addition, the two powerful fans provide excellent cooling during extrusion. Dripping and deformation are a thing of the past thanks to the fast and even cooling.

Choose convenience
The quick nozzle swap system makes it easy to change your tri-metal nozzle. The automatic bed leveling and the flexible, textured PEI building board make the 3D printing process even easier. The convenient 4.3-inch HD touchscreen makes it easy to control your 3D printer. You can also find other information here, such as the temperature, the leveling process and a preview of the model you want to print.

Creality OS
This 3D printer works with the open-source Creality OS, which is based on Klipper. Take advantage of the many features that come with this software or customize it to your liking. Choose Creality print, which allows you to use smart cooling, optimal retraction and smart tree supports.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	WiFi	Has laser option:	no
Dimensions:	498 x 358 x 374 mm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	110 °C
Nozzle diameter:	0.4 mm	Max print depth:	22 cm
Nozzle type:	M6H23	Max print height:	25 cm
Power rating:	350 W	Max print volume:	12.1
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00250
Has CNC option:	no	Weight:	7.38 kg

€319.00 (coming soon)

€259.35 Excl. 23% VAT

Anycubic Kobra S1 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600mm/s, you can create the coolest projects in no time. In addition, this 3D printer has handy functions that make it even easier for you.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320˚C full metal hotend, a 120˚C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic leveling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odors.

Other functionalities
The 4.3 inch touchscreen has an intuitive UI, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	490 x 400 x 410 mm	Max print depth:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Nozzle diameter:	0.4 mm	Max print volume:	15.625
Power rating:	1,500 W	Max print width:	25 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	320 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	yes	Our item no:	DKI00318
Has CNC option:	no	Variant:	Without ACE Pro
Filament sensor:	yes	Weight:	15.5 kg
Heated bed included:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€399.00 (coming soon)

€324.39 Excl. 23% VAT

Anycubic Kobra S1 Combo 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600mm/s, you can create the coolest projects in no time. In addition, this 3D printer has handy functions that make it even easier for you. With this combo you also immediately receive the Ace Pro multi-material system.

Ace Pro
The Ace Pro allows you to use up to 4 colours or materials in one print. This allows you to easily create colourful 3D prints or prints with multiple materials. By connecting multiple Ace Pro units, you can even increase this number to 8 colours or materials. This unit also actively dries the filament during 3D printing, giving you 3D prints of the best possible result.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320˚C full metal hotend, a 120˚C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic leveling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odors.

Other functionalities
The 4.3 inch touchscreen has an intuitive UI, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Brand:	Anycubic	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	120 °C
Dimensions:	490 x 400 x 410 mm	Max print depth:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Nozzle diameter:	0.4 mm	Max print volume:	15.625
Power rating:	1,500 W	Max print width:	25 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	320 °C	Printer voltage:	24 v/°c
3D print option:	yes	Max print speed:	600 mm/s
Camera included:	yes	Our item no:	DKI00319
Has CNC option:	no	Variant:	With ACE Pro
Filament sensor:	yes	Weight:	15.5 kg
Heated bed included:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€459.00 (coming soon)

€373.17 Excl. 23% VAT

€599.00 Anycubic3D rrp

Creality 3D K2 Combo 3D Printer

Zoom in

Description The Creality K2 Combo is a fast and compact CoreXY 3D printer with high-quality features for both demanding hobbyists and professional makers. With a print speed of up to 600mm/s, silent step-servo motors, a closed-loop design, and the Creality Filament System (CFS), this 3D printer offers excellent performance in a surprisingly compact size. With support for various filament types and automatic bed levelling, the K2 Combo is ready for modern printing challenges.

Key Features:

Building volume : 260mm × 260mm × 260mm
Print speed : up to 600mm/s
Hot end temperature : up to 300°C
CFS System: For multi-colour prints

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	573 x 445 x 477 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	26 cm
Printer bed levelling:	automatic	Max print volume:	16.95
Printer extruder:	direct	Max print width:	26 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Weight:	23.7 kg
Filament sensor:	yes

€539.00 (coming soon)

€438.21 Excl. 23% VAT

€659.00 Creality3D rrp

Creality 3D K2 Plus Combo 3D Printer

Zoom in

2
1
0

Description Create amazing, multi-coloured 3D prints with the K2 Plus Combo 3D printer from Creality. This printer has a build volume of no less than 350mm x 350mm x 350mm, allowing you to easily create large 3D prints. The maximum print speed is up to 600mm/s with an acceleration of 30,000mm/s². Thanks to the active print chamber heating, the chamber is heated to 60˚C. This allows you to work with many types of materials and the possibilities are endless.

Smart features
This 3D printer comes with automatic anti-tilt bed leveling and a 4.3 inch colour touchscreen. The flexible build plate makes it easy to remove 3D prints after printing. In addition, the K2 Plus has a direct drive extruder, which allows for stable printing. Smart functions make printing even easier. For example, the filament run-out sensor lets you know when the filament is empty, the automatic filament backup can load other filament and the filament tangle sensor gives a message when the filament is tangled.

Other functionalities
The K2 Plus Combo comes with an AI camera, which allows you to monitor the 3D printing process. This printer also has an air purification, so you do not suffer from toxic substances and unpleasant odours. You can send files via Ethernet, WiFi or with a USB stick. Print up to 4 colours or materials simultaneously or use the system for a backup spool of a colour or material that you use often.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	120 °C
Dimensions:	72.5 x 49.5 x 51.5 cm	Max print depth:	35 cm
Input voltage:	110-220V	Max print height:	35 cm
Nozzle diameter:	0.4 mm	Max print volume:	42.875
Printer bed levelling:	automatic	Max print width:	35 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	350 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00283
Has CNC option:	no	Variant:	With CFS
Filament sensor:	yes	Weight:	38.5 kg
Heated bed included:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€1,249.00 (coming soon)

€1,015.45 Excl. 23% VAT

€1,499.00 Creality3D rrp

Voxelab Aquila X2 3D Printer

Zoom in

Description The Voxelab Aquila X2 3D Printer is equipped with a 32-bit whisper-quiet motherboard with TMC2208 stepper drivers and a high-quality power supply. The build plate is made of sturdy, super-flat carborundum glass. The printer has a large print volume of 220mm x 220mm x 250mm and is equipped with a sensor that sees when the filament is almost empty. The 4.3" coloured LCD screen is easy to read and very easy to use.

Specifications

Brand:	Voxelab	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	100 °C
Dimensions:	47.3 x 47.3 x 48 cm	Max print depth:	22 cm
Input voltage:	115-230V	Max print height:	25 cm
Printer bed levelling:	manual	Max print volume:	12.1
Printer extruder:	bowden	Max print width:	22 cm
Extruder max temp:	250 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00104
Filament sensor:	no	Weight:	8.2 kg
Heated bed included:	yes

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Assembly manual (video)

€167.00 (coming soon)

€135.77 Excl. 23% VAT

Creality 3D Ender-3 Neo 3D printer

Zoom in

Description The Ender-3 Neo is an FDM printer from Creality with a build volume of 220mm x 220mm x 250mm and a size of 440mm x 440mm x 465mm. The printer has a number of advanced features that contribute to an excellent print result, including a silicon carbide bed that heats evenly and can be automatically calibrated, an all-metal extruder that feeds filament at a higher pressure, and steel alloy springs for better stability.

In addition, the Creality Ender-3 Neo works a lot more efficiently and less disturbing. A 32-bit silent mainboard minimizes printing noise, and a corrugated heatsink provides more surface area for cooling. And is there something wrong with the power supply to the printer? The printer automatically stops the printing process in the event of a power failure, so you can resume it yourself when the printer is working again, and so you don't waste any filament.

Finally, this Creality FDM printer can be customized as desired. The design is modular and components can be easily modified or expanded with additional options, allowing you to tailor the printer to specific tasks.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	465 x 440 x 440 mm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	22 cm
Nozzle type:	MK8	Max print height:	25 cm
Power rating:	350 W	Max print volume:	12.1
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00133
Has CNC option:	no	Weight:	7 kg
Filament sensor:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€167.00 (coming soon)

€135.77 Excl. 23% VAT

Creality 3D Ender-3 v3 SE 3D printer ⭐ Our choice for a budget plug & play printer

Creality 3D Ender-3 v3 SE 3D printer DKI00192

Zoom in

Description Open up a world of infinite creative possibilities with the Ender-3 V3 SE printer from Creality. Within 20 minutes you have assembled the printer and it is ready for use. With the easy auto bed-levelling system you can always start printing quickly. The CR Touch sensor easily levels the build plate and the tension sensor provides an automatic z-offset. The Ender-3 V3 SE is perfect for making all kinds of prints: from home accessories to gadgets, this printer can do it all and has a maximum print speed of 250mm per second.

The reliable 'Sprite' extruder of the Ender-3 V3 SE can handle many different materials, such as PLA, PETG and the flexible TPU. The filament is automatically loaded and unloaded for even more ease of use. With the 'extrude' function, the filament will flow smoothly from the nozzle. The 'retract' function will quickly retract the filament, after which you can remove and replace it effortlessly. Thanks to the sturdy double z-axis, the printer wobbles less. The 8mm thick y-axis shafts are designed to guide the build plate smoothly and last for a long time. Together these ensure that every print is printed perfectly. The printer is particularly easy to operate by means of the 3.2 inch colour display, which can be operated with the rotary knob. The UI uses motion graphics to display the leveling process, among other things. This way you can see at a glance what the printer is doing and what the progress is. Finally, the Ender-3 V3 SE has a stylish and compact design, making it perfect for any interior.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	490 x 364 x 364 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	Creality Spider / Ender-7	Max print volume:	12.1
Power rating:	350 W	Max print width:	22 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	direct	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00192
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	7.12 kg
Filament sensor:	no

€169.00 (coming soon)

€137.40 Excl. 23% VAT

Creality 3D Ender-3 V2 3D Printer

Zoom in

Description The Creality Ender-3 V2 is a reliable, compact 3D printer that is even more stable, faster and safer than its predecessor, the Ender-3! This FDM printer has a medium-sized print surface (220mm x 220mm x 250mm) and is easy and quick to assemble thanks to its smart design. The ultra-conductive and even heated bed has a glass plate with a carborundum coating for better adhesion of your 3D prints. In addition, the heated bed reaches a temperature of 100°C within just 5 minutes, so that you can get started with your 3D design almost immediately.

The printer is easy to operate via the high-quality rotary knob and virtually silent thanks to the high-quality V-slot profile and renewed motherboard. The sturdy steel frame has an integrated tool storage box and a handy gear wheel to adjust the XY axis. The power supply is incorporated in the metal frame for extra safety and if voltage drop unexpectedly, the resume function will automatically resume your print. Although the Creality Ender-3 V2 has been specially developed for printing with PLA filament, the presence of the heated bed also makes it possible to print with TPU and PETG. With a print precision of 0.1mm, this 3D printer is the right choice for the most detailed designs.

The printer has the following features:

Improved manual bed levelling function
Automatically resume after power failure
Stable power supply
Improved user interface

The printer comes with a standard tool kit (for assembly) and a test piece of PLA filament.

Tip: Do you want to get started with the 3D printer right away? Then it is wise to order filament separately.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	62 x 47.5 x 47 cm	Heatbed max temp:	100 °C
Input voltage:	230-115V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	MK8	Max print volume:	12.1
Printer bed levelling:	manual	Max print width:	22 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	250 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00039
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	7.8 kg

Order extras

3DLAC Plus adhesive spray (100ml) €7.75

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Instructional video

€199.00 (coming soon)

€161.79 Excl. 23% VAT

Creality 3D Ender 3 V3 KE 3D printer

Zoom in

Description The Creality 3D Ender 3 V3 KE is one of the new printers from Creality. The printer has a compact design and is easy to assemble. Although it weighs little, it has the same functionalities as other printers. This gives you more freedom to get creative.

Make larger prints quickly
This printer has a Sprite Direct Drive extruder and can print super fast. With a maximum print speed of 500 mm/s, you can print a Benchy in no less than 15 minutes and 8 seconds. The build volume of 220mm x 220mm x 240mm gives you enough space to make larger prints.

Touchscreen operation
The Ender 3 V3 KE has a touchscreen with an intuitive UI. A smart self-test makes it possible to control the z-offset, auto levelling and more at the touch of a button. You also have a real-time preview of the model you are printing and vivid motion graphics showing the printing parameters.

Smart algorithms
The smart Creality operating system uses algorithms that ensure better quality of your print. For example, you can use the 'Input shaping' option, which reduces the vibration of the printer. You also have the option to use the 'motion advance' option, which optimizes the supply of filament. This ensures less ghosting and bumps.

Filaments at higher temperatures
This printer has a hot end with a 60W ceramic heater that can completely melt filaments for high-speed printing. This comes with a copper nozzle, allowing you to print at 300°C. This opens up a world of filaments you can print with, such as PLA, PETG, ABS and TPU.

Remote printing
Control and monitor the progress of your print wherever you are through LAN and Cloud printing. You can control your entire 3D printer via a WiFi network and your PC (Creality Print) or your smartphone (Creality Cloud APP, available for Apple and Android). If you own multiple printers, you can control them all online at the same time.

Other functionalities
The x-axis with linear rails ensure smooth movements and better precision. The cooling fans on two sides ensure super-fast cooling. This will cause the parts just printed to cool down quickly, which ensures a tight print.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	WiFi	Has laser option:	no
Dimensions:	490 x 364 x 364 mm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	100 °C
Nozzle diameter:	0.4 mm	Max print depth:	22 cm
Nozzle type:	M6H23	Max print height:	24 cm
Power rating:	350 W	Max print volume:	11.616
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00200
Has CNC option:	no	Weight:	7.12 kg

€239.00 (coming soon)

€194.31 Excl. 23% VAT

Elegoo Neptune 4 Plus 3D printer

Zoom in

Description Bring your creative ideas to life with the Elegoo Neptune 4 Plus 3D printer. Print larger models with a build volume of 320mm x 320mm x 385mm. The efficient cooling system, auto bed leveling at 11 x 11 points and the magnetic PEI build plate make it even easier for you. You can transfer your files quickly and easily via WIFI, WLAN or USB.

Fast and accurate printing
The Neptune 4 Plus comes with the powerful Klipper firmware already installed, allowing your print speed to increase to 500mm/s. The ARM 64-bit 1.5 G quad-core processor also helps with this. The acceleration sensors on the x and y axes calibrate automatically and thus improve the print quality. The dual-gear direct extruder ensures fast and precise extrusion, resulting in accurately printed models.

Different filaments
The nozzle heats up to 300℃. This also allows you to easily use materials that need to be printed at a higher temperature, such as ABS, TPU and Nylon. Using these materials gives you many more possibilities for models and prints.

Specifications

Brand:	Elegoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	110 °C
Dimensions:	638 x 533 x 517 mm	Max print depth:	32 cm
Input voltage:	100-240V	Max print height:	38.5 cm
Printer bed levelling:	semi-automatic	Max print volume:	39.424
Printer extruder:	direct	Max print width:	32 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00212
Filament sensor:	yes	Weight:	17.1 kg
Heated bed included:	yes

€249.99 (coming soon)

€203.24 Excl. 23% VAT

€339.00 Elegoo rrp

Creality 3D CR-200B 3D Printer

Zoom in

Description The Creality 3D CR-200B is a 3D printer with a print volume of 200mm x 200mm x 200mm and a completely closed housing. Thanks to this housing, your prints are less affected by external factors and you can print more accurately. The parts are resistant to high temperatures, making it possible to work with many different materials, including ABS.

Create high-quality prints using the updated hot end and metal extruder, which provide excellent thermal conductivity and an even filament flow. A handy addition is the smart filament sensor, which automatically interrupts the printing process when the filament runs out or breaks. The carborundum glass plate heats up quickly and is known for its good adhesion.

As soon as you get started with the Creality printer, you will experience its ease of use. Operation is simple and clear thanks to the large colour touchscreen with a new user interface. The transparent housing, in combination with the LED lighting, ensures that you can keep a close eye on the progress of prints. In addition, the motherboard produces little noise, so that you and others can work and live comfortably around the 3D printer.

The 3D printer is delivered almost completely assembled: within a few minutes you'll have installed the individual parts and you can adjust the settings to your preference. How exactly does this process work? Check it out in the product video (pop up).

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	100 °C
Dimensions:	50.3 x 41.1 x 43.5 cm	Max print depth:	20 cm
Input voltage:	115-235V	Max print height:	20 cm
Nozzle diameter:	0.4 mm	Max print volume:	8
Printer bed levelling:	manual	Max print width:	20 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00050
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	yes	Weight:	16 kg
Heated bed included:	yes

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Instructional video

€257.00 (coming soon)

€208.94 Excl. 23% VAT

Creality 3D Ender-3 S1 3D Printer

Zoom in

Description The Ender 3 S1 3D Printer is a high-quality FDM 3D printer from Creality. The printer distinguishes itself with the simplicity of installation and assembly (it can be prepared for use in just 6 steps), the 'Sprite' Direct Extruder that feeds very precise and constant filament, and the CR Touch process that automatically calibrates the print bed.

In addition, this 3D printer is virtually silent; less than 50dB of noise is produced during printing, so that you will not be disturbed by printing at night. For example, does the print stop due to a power failure or a fully unwound filament roll? Then the printing process will automatically resume as soon as the problem is solved.

The printer features dual Z-axes for smooth movement of the x-axis. When a print is ready, it can be easily removed due to the magnetic and flexible bed.

Tip: Do you want to get started with the 3D printer right away? Then it is wise to order filament separately.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	62.2 x 45.3 x 48.7 cm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	27 cm
Nozzle type:	MK8	Max print volume:	13.068
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00096
Has CNC option:	no	Weight:	9.1 kg
Filament sensor:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€240.30 (coming soon)

€195.37 Excl. 23% VAT

GEEETECH A10T 3 Colour Mixing 3D Printer

Zoom in

Description With the Geeetech A10T 3D printer you can easily combine different colours of filament. The printer has space for three colours or types, which you can alternate or combine in one print. Mixing the colours is easy with the Colour Mixer software.

Thanks to its modular design, the A10T is easy to assemble, so you can start printing quickly. The printer has a reset button that resets the settings to the ones in the G-code and thanks to the 'resume printing' option, a print is automatically resumed after a power failure.

The 3D printer has an accuracy of 0.1mm and a build volume of 220mm x 220mm x 250mm, making printing details excellently visible. The designs can be seen even better through the extruder hood with 360° ventilation design, which also ensures good heat dissipation.

The rails are made of strong, wear-resistant aluminium and, in combination with the V-shaped wheels, ensure less noise during printing. The 3-in-1 hotend is designed to significantly reduce the risk of clogging or leaks.

Specifications

Brand:	Geeetech	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	48.5 x 47.8 x 41.3 cm	Heatbed max temp:	110 °C
Input voltage:	115-230V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	manual	Max print volume:	12.1
Printer extruder:	bowden	Max print width:	22 cm
Extruder max temp:	250 °C	No of extruders:	3
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00065
Filament sensor:	yes	Weight:	7.8 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€267.50 (coming soon)

€217.48 Excl. 23% VAT

Creality 3D Ender-5 Pro 3D Printer

Zoom in

Description With the Creality 3D Ender 5 Pro 3D printer kit you can easily and quickly build your own 3D printer. This model has a medium print area (220mm x 220mm x 300mm) and a clear LCD screen to operate the printer. The transparent cube-like construction ensures you have a good view of the prints from all angles.

The heated print bed heats up quickly to a maximum of 125°C. The magnetic bonding platform makes it easy to remove your prints as soon as they are ready. The print platform is very stable thanks to the double guide. Furthermore, you never have to worry about power outages again. This printer has a smart "Resume Print" function, which automatically resumes printing as soon as there is power again.

The Creality 3D Ender-5 Pro has a metal extruder and Capricorn PTFE tube, which ensures good throughput of the filament.

The V4.2.2 Silent Mainboard with TMC2208 step drivers allows precise printing performance and quiet operation. Marlin 1.1.8 and Bootloader are installed by default. In addition, this model can handle Gcode files from the well-known slicers such as Cura, Slic3r, Repetier and Simplify3d.

Included with this printer kit:

Accessories kit
PLA test filament
Spare parts
Spatula

Note: for printing with ABS we recommend a glass plate.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	51 x 55.2 x 48.5 cm	Heatbed max temp:	125 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Nozzle type:	MK8	Max print volume:	14.52
Power rating:	270 W	Max print width:	22 cm
Printer bed levelling:	manual	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00030
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	11.8 kg
Filament sensor:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Assembly manual (video)

€299.00 (coming soon)

€243.09 Excl. 23% VAT

Creality 3D Sermoon V1 3D Printer

Zoom in

Description Immediately start with 3D printing, without having to assemble or adjust parts? Then the Creality Sermoon V1 is a perfect choice.

The Sermoon V1 is a compact, closed 3D printer that is immediately ready for use. All you need to do is take the printer out of the box and plug it into the power outlet. The printer is ready to start within seconds! In addition, the one-button operation makes it ideal for novice users.

The most important features:

A build space of 175mm x 175mm x 165mm.
No leveling required.
A direct dual gear extruder.
Maximum nozzle temperature of 250°C.
Maximum bed temperature of 80°C.
Intelligent one-button control for automatic input and output.
A filament sensor and resume printing function.
A fully enclosed chassis for extra stable and secure printing.

Excellent prints
The patented direct drive dual gear extruder contains two chrome gears. These ensure a firm filament grip, even execution of the filament and accurate prints. The simple design allows you to quickly install, remove and maintain the 0.4mm nozzle. The compact cube-shaped printer has an intelligent control - the filament is inserted or removed with one click.

Intelligent sensors
The sensors of the Creality Sermoon V1 detect an unexpected power failure and then save the current printer status. Once the printer starts up again, it will automatically continue at the correct point. In addition, the printer detects running or broken filament. The 3D printer will then automatically pause and restart once the filament has been replaced.

Effortlessly remove prints
The metal, magnetic circuit board provides stability during printing. The flexible metal makes it easy to remove rounded prints.

Other specifications
You can easily operate the Creality Sermoon V1 with the 4.3 inch touchscreen. The printer can be connected via Wi-Fi and with the Creality Cloud app you can access the printer from anywhere. Thanks to the super-quiet fans and the silent IC mainboard, the printer is so quiet that you hardly notice it. The built-in, environmentally friendly LED lighting not only saves energy, but also makes it possible to monitor prints even in the evening and at night.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	no
Dimensions:	43 x 40 x 38 cm	Heatbed max temp:	80 °C
Input voltage:	100-240V	Max print depth:	17.5 cm
Nozzle type:	MK8	Max print height:	16.5 cm
Printer bed levelling:	automatic	Max print volume:	5.053
Printer extruder:	direct	Max print width:	17.5 cm
Extruder max temp:	250 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00102
Filament sensor:	yes	Weight:	11.5 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€299.00 (coming soon)

€243.09 Excl. 23% VAT

Elegoo Centauri Carbon 3D printer

Zoom in

3
2
1
0

Description Unleash your creativity with the Elegoo Centauri Carbon 3D printer. This powerful CoreXY printer combines speed, precision, and reliability in a sleek design, and is suitable for home users, makers, schools, and professionals. With a build volume of 25.6cm x 25.6cm x 25.6cm and support for a wide range of filaments, including carbon-reinforced material, you can make the most of your design ideas.

Print with speed and accuracy
Equipped with custom firmware and a powerful processor, the Centauri Carbon enables blazing fast prints of up to 500mm/s, without compromising on detail. The CoreXY structure with its stable build enables high speeds with minimal vibration, keeping your prints razor-sharp, even with complex models.

Professional choice of materials
Thanks to the robust hotend and heated bed, the Centauri is suitable for a wide variety of filaments, including PLA, PETG, ABS, ASA, TPU, PET, PC and PA. Want to print even stronger and more durable? Then use Carbon or Glass Fiber Reinforced filaments for industrial applications or technical parts.

Smart features for a smooth printing process
The Centauri Carbon is equipped with all the conveniences you would expect from a modern 3D printer. A filament run-out sensor prevents your print from failing when the spool is empty, while power loss recovery automatically resumes your print after a power failure. The built-in camera allows you to monitor your printing process remotely, ideal for longer or complex prints. You can easily operate it via the intuitive touchscreen.

For every user, from beginner to expert
Whether you’re a hobbyist experimenting at home, a 3D technology teacher, or a professional printing functional prototypes, the Centauri Carbon adapts to your needs. The combination of ease of use and advanced settings makes this printer suitable for all levels.

Specifications

Brand:	Elegoo	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	490 x 398 x 404 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	25.6 cm
Nozzle diameter:	0.4 mm	Max print height:	25.6 cm
Printer bed levelling:	automatic	Max print volume:	16.777
Printer extruder:	direct	Max print width:	25.6 cm
Extruder max temp:	320 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00326
Filament sensor:	yes	Weight:	17.5 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€299.99 (coming soon)

€243.89 Excl. 23% VAT

€349.00 Elegoo rrp

Creality 3D K1 SE 3D printer

Zoom in

Description Choose the Creality K1 SE for a fast, reliable, and user-friendly FDM 3D printing experience. This CoreXY 3D printer offers a build volume of 220mm x 220mm x 250mm and boasts impressive speeds of up to 600mm/s, with an acceleration of 20000mm/s². Thanks to its advanced input shaping algorithm and G-sensor, the K1 SE optimises motor movements to prevent vibration and reduce ghosting, ensuring high-quality prints every time. With a single click, the printer automatically calibrates, making it ready for use and allowing you to bring your creative ideas to life effortlessly.

User-Friendly Features
The K1 SE is equipped with the same flagship-level extruder kit as the K1C, ensuring smooth filament supply. Its durable tri-metal nozzle, composed of copper with a steel tip and a titanium alloy heat break, changes quickly and prevents heat creep. The filament runout sensor alerts you when filament is low, allowing for quick resolution, while the power loss recovery function lets you resume prints seamlessly after a power outage.

Advanced Functionalities
The Creality K1 SE features a 4.3-inch colour touchscreen for intuitive operation. Files can be transferred easily via USB stick or WiFi. Customise your printer by 3D printing additional components like side panels or a spool holder. The USB ports also enable easy connectivity for accessories such as webcams.

Enhance your 3D printing projects with the Creality K1 SE, combining speed, reliability, and user-friendly features in one powerful machine.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	48.2 x 35.5 x 35.5 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	automatic	Max print volume:	12.1
Printer extruder:	direct	Max print width:	22 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00272
Filament sensor:	yes	Weight:	10.24 kg

€329.00 (coming soon)

€267.48 Excl. 23% VAT

Kywoo 3D Tycoon Slim 3D Printer

Zoom in

Description The Kywoo 3D Tycoon Slim 3D Printer is a compact Cartesian FDM printer with a maximum build volume of 240mm x 240mm x 300mm. Using a direct drive extruder increases the consistency of the extrusion. The use of Linear rails in dual configuration increases stability and the printer is equipped with a belt tensioner to control the tension on the drive belts. Bed calibration is easy via a factory-built autolevel kit and the printer can be controlled via a 3.5-inch HD colour touchscreen. The interface can be set in five different languages (EN-FR-GE-SP-IT).

In the event of a power loss, the Tycoon Slim has a built-in resume function. This significantly reduces the chance of failed prints.

Specifications

Brand:	Kywoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	no
Network:	no	Heatbed max temp:	110 °C
Dimensions:	522 x 464 x 552 mm	Max print depth:	24 cm
Input voltage:	115-230V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	17.28
Printer bed levelling:	automatic	Max print width:	24 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00128
Has CNC option:	no	Weight:	9 kg
Filament sensor:	yes	XY precision:	0.1 mm
Heated bed included:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€235.90 (coming soon)

€191.79 Excl. 23% VAT

Creality 3D Ender-3 S1 Pro 3D Printer

Zoom in

Description The Creality 3D Ender 3 S1 Pro 3D printer is equipped with a "Sprite" direct dual gear extruder, so you can use the printer in combination with many different types of filament. In addition, the printer has a double Z-axis for more stability and safety. Lines and edges on the sides of the printed object are reduced by the Z-axis with double lead screw and double motor. The PEI magnetic print bed made of PC spring steel ensures smooth adhesion and easy removal of your print.

The printer has a 32-bit silent motherboard, making printing whisper-quiet. The 4.3 inch touchscreen ensures easy operation. The printer is already 96% pre-assembled, so you can get started quickly.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	62.5 x 45.5 x 49 cm	Heatbed max temp:	110 °C
Input voltage:	115-230V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	27 cm
Nozzle type:	MK8	Max print volume:	13.068
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00113
Has CNC option:	no	Weight:	8.6 kg
Filament sensor:	yes

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€339.00 (coming soon)

€275.61 Excl. 23% VAT

GEEETECH A20T 3 Colour Mixing 3D Printer

Zoom in

Description With the Geeetech A20T 3D printer you can easily combine different colours of filament. The printer has space for three colours or types, which you can alternate or combine in one print. It is also possible to add a colour gradient to your design. Mixing the colours is easy with the Colour Mixer software. In addition, multiple extruders also create PVA prints, making prints with difficult dimensions easier to print.

The modular design of the printer means you can set it up in three simple steps. A filament detector gives a signal when the filament is almost empty, so that you can replace it in time. Thanks to the 'resume printing' option, a print is automatically resumed after a power failure. The printer also features a reset button that resets the settings to the settings in the G-code.

The printer has a build volume of 250mm x 250mm x 250mm. The V-shaped rails are made of strong aluminium and create less noise during printing. The printer has an accuracy of 0.1mm~0.2mm, making the texture of your prints delicate. The nozzle has a diameter of 0.4mm.

Specifications

Brand:	Geeetech	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	48 x 44.2 x 44.7 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	manual	Max print volume:	15.625
Printer extruder:	bowden	Max print width:	25 cm
Extruder max temp:	250 °C	No of extruders:	3
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00059
Filament sensor:	yes	Weight:	9 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€347.00 (coming soon)

€282.11 Excl. 23% VAT

Elegoo Neptune 4 Max 3D printer

Zoom in

Description Realise your grand 3D printing plans with the Elegoo Neptune 4 Max 3D printer. At 420mm x 420mm x 480mm, this printer has the largest construction volume within the Elegoo Neptune 4 family. The efficient cooling system, the auto bed levelling at 11 x 11 points and the magnetic PEI building plate make it even easier for you. You can transfer your files quickly and easily via WIFI, WLAN or USB.

Fast and accurate printing
The Neptune 4 Plus comes with the powerful Klipper firmware already installed, allowing your print speed to increase to 500mm/s. The ARM 64-bit 1.5 G quad-core processor also helps with this. The acceleration sensors on the x and y axes automatically calibrate and thus improve print quality. The dual-gear direct extruder ensures fast and precise extrusion, resulting in accurately printed models.

Different filaments
The nozzle heats up to 300℃. This also allows you to easily use materials that need to be printed at a higher temperature, such as ABS, TPU and Nylon. Using these materials gives you many more options for models and prints.

Specifications

Brand:	Elegoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	80 °C
Dimensions:	740 x 658 x 632 mm	Max print depth:	42 cm
Input voltage:	100-240V	Max print height:	48 cm
Printer bed levelling:	semi-automatic	Max print volume:	84.672
Printer extruder:	direct	Max print width:	42 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00213
Filament sensor:	yes	Weight:	22.2 kg
Heated bed included:	yes

€349.99 (coming soon)

€284.54 Excl. 23% VAT

€439.00 Elegoo rrp

Quantity	Product
No products
Total: €0.00

Filament 3D Printers

Popular products