Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

ESUN

121 - 144 of 173

eSun gold-silver ePLA-Silk Magic filament 1.75mm, 1kg

eSun gold-silver ePLA-Silk Magic filament 1.75mm, 1kg DFE20222

Description Create a dreamy effect with the two-colour gold-silver ePLA-Silk Magic filament from eSun. The filament changes colour when viewed from a different angle. This gives your prints a surprising and playful effect. Compared to other materials, ePLA Silk Magic is easier to remove. In addition, it gives the print a smooth appearance. This Magic PLA filament is an upgrade from standard PLA and can therefore be printed very easily.

Dreamy two-tone effect
Silky, shiny texture
Slippery surface
Easy to remove
Easy to print
Not easy to break

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20222
Colour:	gold/silver	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA

€28.00

€22.76 Excl. 23% VAT

EU warehouse

eSun red-blue ePLA-Silk Magic filament 1.75mm, 1kg

eSun red-blue ePLA-Silk Magic filament 1.75mm, 1kg DFE20223

Description Create a dreamy effect with the two-colour red-blue ePLA-Silk Magic filament from eSun. The filament changes colour when viewed from a different angle. This gives your prints a surprising and playful effect. Compared to other materials, ePLA Silk Magic is easier to remove. In addition, it gives the print a smooth appearance. This Magic PLA filament is an upgrade from standard PLA and can therefore be printed very easily.

Dreamy two-tone effect
Silky, shiny texture
Slippery surface
Easy to remove
Easy to print
Not easy to break

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20223
Colour:	red blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA

€28.00

€22.76 Excl. 23% VAT

EU warehouse

eSun ePLA-GF natural filament 1.75mm, 1kg

eSun ePLA-GF natural filament 1.75mm, 1kg DFE20224

Description Create impact-resistant 3D prints with eSun ePLA GF. This is a PLA filament to which glass fibre particles have been added, which makes the filament more impact-resistant and still easy to print. This makes this filament suitable for, among other things, printing prototypes for mechanical parts that require high stiffness and impact resistance. This filament has a neutral colour, a diameter of 1.75mm and comes on a spool of 1kg.

Please note: eSun ePLA GF is not easy to bend and this should therefore be prevented as much as possible. In addition, it is recommended to work with a hardened steel or ruby nozzle and a hardened steel extruder.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20224
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA

Order now, we can ship this today!

€32.50

€26.42 Excl. 23% VAT

In stock

eSun natural ePLA-LW filament 1.75mm, 1kg

eSun natural ePLA-LW filament 1.75mm, 1kg DFE20225

Description eSun ePLA-LW Natural is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.

The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers.

Density from 0.54 grams per cm3
Foaming volume ratio of 220%
Manually adjust the strength and foaming ratio
Matte surface
Good adhesion between layers
Easy to dye
Easy to print

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 270 °C
Brand:	eSun	Our item no:	DFE20225
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePLA-LW

€38.00

€30.89 Excl. 23% VAT

EU warehouse

eSun black ePLA-LW filament 1.75mm, 1kg

eSun black ePLA-LW filament 1.75mm, 1kg DFE20226

Description eSun ePLA-LW Black is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.

The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers.

Density from 0.54 grams per cm3
Foaming volume ratio of 220%
Manually adjust the strength and foaming ratio
Matte surface
Good adhesion between layers
Easy to dye
Easy to print

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 270 °C
Brand:	eSun	Our item no:	DFE20226
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA Light weight

€38.00

€30.89 Excl. 23% VAT

EU warehouse

eSun galaxy black eStars PLA filament 1.75mm, 1kg

eSun galaxy black eStars PLA filament 1.75mm, 1kg DFE20227

Description Take a trip to space with eSun eStars-PLA filament Galaxy Black. This environmentally friendly filament is easy to print with and has a beautiful luminous effect reminiscent of a starry sky. e-Stars PLA can glow in the dark after exposure to light thanks to the glow-in-the-dark property of this filament.

The luminous effect is related to the intensity of the light and how long the print is in contact with the light source. The longer the print is exposed to the light, the better the effect is visible. You can achieve even better results if you expose your print to ultraviolet light instead of direct sunlight.

Note: We recommend using a steel or ruby nozzle with this filament in combination with a hard steel extruder. The luminous grains in this filament can lead to faster wear of the printer.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20227
Colour:	galaxy black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	eStars-PLA

€32.50

€26.42 Excl. 23% VAT

EU warehouse

eSun rainbow Luminous PLA filament 1.75mm, 1kg

eSun rainbow Luminous PLA filament 1.75mm, 1kg DFE20228

Description This rainbow Luminous PLA filament from eSun is a modified, multi-coloured PLA filament with a beautiful rainbow effect. It is made of environmentally friendly material and easy to print with. The blending colours guarantee a striking and unique print. This makes it a perfect filament for decorative prints, toys, sculptures and clothing, for example.

The luminous effect is related to the intensity of the light and how long the print is in contact with the light source. The longer the print is exposed to the light, the better the effect is visible.

Note: We recommend using a steel or ruby nozzle with this filament in combination with a hard steel extruder. The luminous grains in this filament can lead to faster wear of the printer.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20228
Colour:	rainbow	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	Luminous PLA

Order now, we can ship this today!

€32.50

€26.42 Excl. 23% VAT

In stock

eSun black eASA filament 1.75mm, 1kg

eSun black eASA filament 1.75mm, 1kg DFE20231

Description eSun eASA filament has mechanical properties equal to those of ABS. In addition, eASA is more resistant to bad weather conditions and UV radiation. The strength and stiffness, in combination with the high impact resistance, make this filament ideal for outdoor prints.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 270 °C
Brand:	eSun	Our item no:	DFE20231
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 110 °C	Spool width:	6.5 cm
Material:	eASA

€28.50 (coming soon)

€23.17 Excl. 23% VAT

eSun black ePA12 Nylon filament 1.75mm, 1kg

eSun black ePA12 Nylon filament 1.75mm, 1kg DFE20234

Description This black eSun ePA12 filament is ideal for making durable prints. ePA12 prints very well and is more resistant to wear. It is based on PA12 and absorbs less moisture than other filaments, meaning your print is less affected by humidity and temperature changes. The filament shrinks little, is not easy to deform and does not break during printing.

This filament is strong, has a high impact resistance and is very resistant to higher temperatures. Prints from ePA12 will only deform at 100°C, which makes it ideal for printing parts that have to perform at higher temperatures.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 290 °C
Brand:	eSun	Our item no:	DFE20234
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Spool width:	6.5 cm
Material:	ePA12

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this today!

€92.50

€75.20 Excl. 23% VAT

In stock

eSun white ePA12 Nylon filament 1.75mm, 1kg

eSun white ePA12 Nylon filament 1.75mm, 1kg DFE20235

Description This white eSun ePA12 filament is ideal for making durable prints. ePA12 prints very well and is more resistant to wear. It is based on PA12 and absorbs less moisture than other filaments, meaning your print is less affected by humidity and temperature changes. The filament shrinks little, is not easy to deform and does not break during printing.

This filament is strong, has a high impact resistance and is very resistant to higher temperatures. Prints from ePA12 will only deform at 100°C, which makes it ideal for printing parts that have to perform at higher temperatures.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 290 °C
Brand:	eSun	Our item no:	DFE20235
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Spool width:	6.5 cm
Material:	ePA12

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€92.50

€75.20 Excl. 23% VAT

EU warehouse

eSun natural ePA12-CF Nylon filament 1.75mm, 1kg

eSun natural ePA12-CF Nylon filament 1.75mm, 1kg DFE20236

Description This ePA12-CF filament from eSun is based on PA12 with the additional addition of 15% carbon fibres. These enhance the severity and strength of the nylon and even make it possible to use this filament as a replacement for metal in many situations. Because it absorbs little moisture, prints made from this material are more resistant to humidity and temperature changes. This filament is ideal for printing parts such as gears, because it is self-lubricating and can withstand frequent use.

For long-term use, ePA12-CF can function well at temperatures up to 120°C. For short-term use it can withstand a temperature of up to 160°C. The filament shrinks little, is not easy to deform and does not break during printing. It is refined and has a matte appearance.

Specifications

Amount:	1 kg	Nozzle temp range:	270 - 300 °C
Brand:	eSun	Our item no:	DFE20236
Colour:	natural	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePA12-CF

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€99.50

€80.89 Excl. 23% VAT

EU warehouse

eSun natural ePAHT-CF Nylon filament 1.75mm, 0.75kg

eSun natural ePAHT-CF Nylon filament 1.75mm, 0.75kg DFE20238

Description This eSun ePAHT-CF filament is based on PA6 with an addition of 15% carbon fibres. The high strength, stiffness, mechanical and thermal properties are even better than other nylon filaments from eSun. In many cases, ePAHT-CF can be used as a replacement for metal. This makes it perfect for printing robot, drone and aviation parts.

For long-term use, ePAHT-CF can function well at temperatures up to 150°C. For short-term use it can withstand a temperature of up to 180°C. The filament shrinks little, is not easy to deform and does not break during printing. It is refined and has a matte appearance.

Please note:

For best results, dry ePAHT-CF at 70°C/>12H and print with a skirt around your model.
Because it is not easy to bend, it is advisable to avoid excessive bending of the wire as much as possible.
The added carbon fibres in ePAHT-CF ensure that you can better print this filament with a hard steel nozzle or a ruby nozzle. We also recommend a hard steel extruder.

Specifications

Amount:	0.75 kg	Nozzle temp range:	260 - 300 °C
Brand:	eSun	Our item no:	DFE20238
Colour:	natural	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.3 cm
Material:	ePAHT-CF

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€91.50

€74.39 Excl. 23% VAT

EU warehouse

eSun ePC black filament 1.75mm, 0.5kg

eSun ePC black filament 1.75mm, 0.5kg DFE20239

Description The black ePC filament from eSun has a high toughness and impact resistance and is heat resistant. The material has a heat distortion temperature of up to 115°C and has a long service life. Use the filament for car parts and electronic, electrical and mechanical objects. This eSun ePC filament has a diameter of 1.75mm.

Specifications

Amount:	0.5 kg	Nozzle temp range:	260 - 300 °C
Brand:	eSun	Our item no:	DFE20239
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePC

€40.50

€32.93 Excl. 23% VAT

EU warehouse

eSun deep black ePLA-Matte filament 1.75mm, 1kg

eSun deep black ePLA-Matte filament 1.75mm, 1kg DFE20249

Description This eSun ePLA-Matte filament in the colour Deep Black is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20249
Colour:	deep black	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm

€24.00

€19.51 Excl. 23% VAT

EU warehouse

eSun light blue ePLA-Matte filament 1.75mm, 1kg

eSun light blue ePLA-Matte filament 1.75mm, 1kg DFE20250

Description This eSun ePLA-Matte filament in the colour Light Blue is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20250
Colour:	light blue	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm

€24.00

€19.51 Excl. 23% VAT

EU warehouse

eSun mint green ePLA-Matte filament 1.75mm, 1kg

eSun mint green ePLA-Matte filament 1.75mm, 1kg DFE20251

Description This eSun ePLA-Matte filament in the colour Mint Green is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20251
Colour:	mint green	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm

€24.00

€19.51 Excl. 23% VAT

EU warehouse

eSun dark grey ePLA-Matte filament 1.75mm, 1kg

eSun dark grey ePLA-Matte filament 1.75mm, 1kg DFE20252

Description This eSun ePLA-Matte filament in the colour Dark Gray is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20252
Colour:	dark grey	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm

Order now, we can ship this today!

€24.00

€19.51 Excl. 23% VAT

In stock

eSun light khaki ePLA-Matte filament 1.75mm, 1kg

eSun light khaki ePLA-Matte filament 1.75mm, 1kg DFE20253

Description This eSun ePLA-Matte filament in the colour Light Khaki is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20253
Colour:	light khaki	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm

€24.00

€19.51 Excl. 23% VAT

EU warehouse

eSun rainbow ePLA-Matte filament 1.75mm, 1kg

eSun rainbow ePLA-Matte filament 1.75mm, 1kg DFE20254

Description Dream away with the rainbow ePLA-Matte filament from eSun. This filament has a matte effect, which provides a refined surface and less visible layer lines. Printing with ePLA is very simple, as you do not need a closed enclosure. It also shrinks little, does not deform or tear the filament, so printing larger models is no problem at all. This colourful filament is ideal for making prototypes or decorative items.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20254
Colour:	rainbow	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun peach pink ePLA-Matte filament 1.75mm, 1kg

eSun peach pink ePLA-Matte filament 1.75mm, 1kg DFE20255

Description This eSun ePLA-Matte filament in the colour Peach Pink is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20255
Colour:	peach pink	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm

€24.00

€19.51 Excl. 23% VAT

EU warehouse

eSun milky white ePLA-Matte filament 1.75mm, 1kg

eSun milky white ePLA-Matte filament 1.75mm, 1kg DFE20256

Description This eSun ePLA-Matte filament in the colour Milky White is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20256
Colour:	milky white	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm

Order now, we can ship this today!

€24.00

€19.51 Excl. 23% VAT

In stock

eSun almond yellow ePLA-Matte filament 1.75mm, 1kg

eSun almond yellow ePLA-Matte filament 1.75mm, 1kg DFE20257

Description This eSun ePLA-Matte filament in the colour Almond Yellow is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20257
Colour:	almond	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm

Order now, we can ship this today!

€24.00

€19.51 Excl. 23% VAT

In stock

eSun black ePLA-ST filament 1.75mm, 1kg

eSun black ePLA-ST filament 1.75mm, 1kg DFE20258

Description This black eSun ePLA-ST filament has high impact resistance, stretches before breaking, is strong and can be printed very accurately. It is a strong PLA filament that has better hardness than PETG and can be printed as smoothly as PLA. This makes this filament suitable for making mechanical parts that need to be printed strongly and accurately.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 230 °C
Brand:	eSun	Our item no:	DFE20258
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePLA-ST

Order now, we can ship this today!

€29.50

€23.98 Excl. 23% VAT

In stock

eSun grey ePLA-ST filament 1.75mm, 1kg

eSun grey ePLA-ST filament 1.75mm, 1kg DFE20259

Description This grey eSun ePLA-ST filament has high impact resistance, stretches before breaking, is strong and can be printed very accurately. It is a strong PLA filament that has better hardness than PETG and can be printed as smoothly as PLA. This makes this filament suitable for making mechanical parts that need to be printed strongly and accurately.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 230 °C
Brand:	eSun	Our item no:	DFE20259
Colour:	grey	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePLA-ST

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

Hot end copper cleaning brush

Hot end copper cleaning brush

€3.95

© 2025 - 123-3d.ie