ESUN

1 - 24 of 147

eSun solid green PETG filament 1.75mm, 1kg

Description The solid green PETG filament from eSun is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE00068
Colour:	green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

eSun blue ABS filament 2.85mm, 1kg

Zoom in

Description eSun's blue ABS filament has good toughness and impact resistance. The material is therefore ideal for strong and durable objects. The filament has a high thermal deformation temperature and can be used in some outdoor and high temperature applications. This eSun ABS filament has a diameter of 2.85mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20009
Colour:	blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun neutral ABS filament 2.85mm, 1kg

Zoom in

Description eSun's neutral ABS filament has good toughness and impact resistance. The material is therefore ideal for strong and durable objects. The filament has a high thermal deformation temperature and can be used in some outdoor and high temperature applications. This eSun ABS filament has a diameter of 2.85mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20010
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun red ABS filament 2.85mm, 1kg

Zoom in

Description eSun's red ABS filament has good toughness and impact resistance. The material is therefore ideal for strong and durable objects. The filament has a high thermal deformation temperature and can be used in some outdoor and high temperature applications. This eSun ABS filament has a diameter of 2.85mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20011
Colour:	red	Inner diameter:	Ø 5.0 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun white ABS filament 2.85mm, 1kg

Zoom in

Description eSun's white ABS filament has good toughness and impact resistance. The material is therefore ideal for strong and durable objects. The filament has a high thermal deformation temperature and can be used in some outdoor and high temperature applications. This eSun ABS filament has a diameter of 2.85mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20012
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS

Colour:

Filament diameter:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun blue ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's blue ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20014
Colour:	blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this tomorrow!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun yellow ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's yellow ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20016
Colour:	yellow	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this tomorrow!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun grey ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's grey ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20018
Colour:	grey	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun green ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's green ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20019
Colour:	green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun light blue ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's light blue ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20021
Colour:	light blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this tomorrow!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun neutral ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20023
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this tomorrow!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun neon green ABS+ filament 1.75mm, 1kg

Zoom in

Description The neon green ABS+ filament from eSun has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20024
Colour:	peak green	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun orange ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's orange ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20025
Colour:	orange	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun purple ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's purple ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20026
Colour:	purple	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun red ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's red ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75 mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20027
Colour:	red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Order now, we can ship this tomorrow!

€25.50

€20.73 Excl. 23% VAT

In stock

eSun silver ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's silver ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20030
Colour:	silver	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Filament diameter:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun black ABS+ filament 1.75mm, 1kg

Zoom in

Description eSun's black ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20031
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun white ABS+ filament 2.85mm, 1kg

Zoom in

Description eSun's white ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 2.85mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 270 °C
Brand:	eSun	Our item no:	DFE20035
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	95 - 110 °C	Spool width:	6.5 cm
Material:	ABS+

Colour:

Filament diameter:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun black eABS MAX filament 1.75mm, 1kg

Zoom in

Description eSun's black eABS MAX filament has excellent mechanical properties, flame retardancy, high toughness and impact resistance. The material is ideal for printing parts for cars, machines and electronics. Use the filament when printing at high temperatures. This eSun eABS MAX filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 240 °C
Brand:	eSun	Our item no:	DFE20037
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 100 °C	Spool width:	6.5 cm
Material:	eABS Max

Order now, we can ship this tomorrow!

€35.50

€28.86 Excl. 23% VAT

In stock

eSun neutral ePA filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ePA Nylon filament has been developed on the basis of 6/66 copolymer. It has a high toughness and impact resistance. In addition, it hardly shrinks or breaks. ePA filament is ideal for printing objects that require high break resistance. It is possible to print the filament. This eSun ePA Nylon filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	eSun	Our item no:	DFE20038
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	ePA

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun neutral ePA-CF filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ePA-CF Nylon filament has been developed on the basis of 6/66 copolymer. It consists of 20% carbon fibre which ensures high strength, stiffness and toughness. This allows the filament to replace metal materials in many cases. This ePA-CF Nylon filament has excellent printability. Your prints get a matte surface with this filament. The material has a heat forming temperature of up to 155℃. In addition, it hardly shrinks, does not warp and does not crack. This eSun ePA-CF Nylon with carbon fibre filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 300 °C
Brand:	eSun	Our item no:	DFE20040
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePA-CF

€55.50

€45.12 Excl. 23% VAT

EU warehouse

eSun neutral ePC filament 1.75mm, 0.5kg

Zoom in

Description eSun's neutral ePC filament has a high toughness and impact resistance and is heat resistant. The material has a heat distortion temperature of up to 115 °C and has a long service life. Use the filament for car parts and electronic, electrical and mechanical objects. This eSun ePC filament has a diameter of 1.75mm.

Specifications

Amount:	0.5 kg	Nozzle temp range:	240 - 270
Brand:	eSun	Our item no:	DFE20042
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 120 °C	Spool width:	6.5 cm
Material:	PCL

Order extras:

KWB Putty knife, 40mm -

€3.95

3DLAC Plus adhesive spray, 100ml -

€7.75

Modifi3D repair/modification tool -

€34.75

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) -

€74.50

€42.50

€34.55 Excl. 23% VAT

EU warehouse

eSun solid red PETG filament 1.75mm, 1kg

Zoom in

Description The plain red PETG filament from eSun is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20043
Colour:	even red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€30.50

€24.80 Excl. 23% VAT

In stock

eSun solid black PETG filament 1.75mm, 1kg

Zoom in

Description eSun's solid black PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20044
Colour:	solid black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG	Variant:	Spool