Buy 3D printers, filament, parts & tools | lowest prices

Creality 3D Sermoon V1 Pro 3D Printer DKI00103

Description Do you want to immediately start with 3D printing, without having to assemble or adjust parts? Then the Creality Sermoon V1 Pro is a perfect choice.

The Sermoon V1 Pro is a compact, closed 3D printer that is immediately ready for use. All you need to do is take the printer out of the box and plug it into the power outlet. The printer is ready to start within seconds! In addition, the one-button operation makes it ideal for novice users.

The most important features

A build space of 175mm x 175mm x 165mm
No levelling required
A direct dual gear extruder
Maximum nozzle temperature of 250°C
Maximum bed temperature of 80°C
Intelligent one-button control for automatic input and output
A filament sensor and resume printing function
A fully enclosed chassis for extra stable and secure printing

Additional features of the Creality Sermoon V1 Pro
The Sermoon V1 Pro has two extra features compared to the normal Sermoon V1:

An HD camera for real-time print control
A door with a safety sensor

Excellent prints
The patented direct drive dual gear extruder contains two chrome gears. These ensure a firm filament grip, even execution of the filament and accurate prints. The simple design allows you to quickly install, remove and maintain the 0.4mm nozzle. The compact cube-shaped printer has an intelligent control - the filament is inserted or removed with one click.

Intelligent sensors
The sensors of the Creality Sermoon V1 Pro detect an unexpected power failure and then save the current printer status. Once the printer starts up again, it will automatically continue at the correct point. In addition, the printer detects ending or broken filament. The 3D printer will then automatically pause and restart once the filament has been replaced. When you open the door, the safety sensor is activated. The printing process then pauses and the device cools down quickly to protect, among other things, curious children's hands.

Effortlessly remove prints
The metal, magnetic circuit board provides stability during printing. The flexible metal makes it easy to remove rounded prints.

Other specifications
You can easily operate the Creality Sermoon V1 Pro with the 4.3-inch touchscreen. The printer can be connected via Wi-Fi and with the Creality Cloud app you can access the printer from anywhere. Thanks to the wide-angle HD camera, you can always monitor your prints in real time. The super quiet fans and the silent IC mainboard ensure a printer that is so quiet that you hardly notice it. The built-in, environmentally friendly LED lighting not only saves energy, but also makes it possible to monitor prints even in the evening and at night.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	no
Dimensions:	43 x 40 x 38 cm	Heatbed max temp:	80 °C
Input voltage:	100-240V	Max print depth:	17.5 cm
Nozzle type:	MK8	Max print height:	16.5 cm
Printer bed levelling:	automatic	Max print volume:	5.053
Printer extruder:	direct	Max print width:	17.5 cm
Extruder max temp:	250 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00103
Filament sensor:	yes	Weight:	11.5 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Assembly manual (video)

€399.50 (coming soon)

€324.80 Excl. 23% VAT

Anycubic 3D Photon Mono X 3D Printer

Zoom in

Description The Anycubic 3D Photon Mono X printer is ideal for creating razor-sharp and detailed prints. This SLA 3D printer has a 4K LCD screen and a solid Z-axis. Thanks to this stable Z-axis, printed layers do not shift. This large model creates prints up to 190mm x 120mm x 240mm and is known for its very high print speed of 60mm per hour.

Create your designs using the Anycubic slicer software. Thanks to new features, you can easily add text and cut or split designs in no time at all. This item has a UV-blocking and transparent top cover. You can set the printing process to stop immediately when you open the cover. The cooling system ensures perfect printing performance. Install the Anycubic app and easily control your 3D printer from your phone.

This printer comes with the following parts:

SD card and card reader
Rubber gloves
Spatula
Tools

The printer is delivered without resin.
View our range of resin: Wanhao resin / Photocentric resin

Specifications

Brand:	Anycubic	Filament sensor:	no
UV wavelength:	405	Heated bed included:	no
Network:	no	Has laser option:	no
Dimensions:	47.5 x 27 x 29 cm	Printer has USB:	yes
Input voltage:	110-220V	Max print depth:	12 cm
Max. Light Intensity:	7	Max print height:	24.5 cm
Light source:	UV LED	Max print volume:	5.645
Output current:	6 A	Max print width:	19.2 cm
Power rating:	120 W	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DCP00193
Camera included:	no	Weight:	10.8 kg
Has CNC option:	no

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

Extra Information

3D Resin
Print bed accessories
Cleaning items

€413.00 (coming soon)

€335.77 Excl. 23% VAT

XYZprinting da Vinci 2.0 A Duo 3D Printer

Zoom in

Description The XYZprinting da Vinci 2.0 A Duo is a handy and compact desktop printer that you can place anywhere. Thanks to the double nozzle, you can easily print with two filaments at the same time. This allows you to create complex 3D objects in different colours and materials in no time at all.

Use the 3D printer in combination with PLA, ABS, PLA Tough and PVA filament. You can create prints in a format of 200mm x 200mm x 150mm with a print speed of 150mm/s. Take a look at the extensive XYZgallery app where you will find thousands of designs that you can print immediately.

Specifications

Brand:	XYZprinting	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	70 °C
Dimensions:	51 x 45.8 x 55.8 mm	Max print depth:	20 cm
Input voltage:	100-240V	Max print height:	15 cm
Nozzle diameter:	0.4 mm	Max print volume:	6
Printer bed levelling:	manual	Max print width:	20 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	210 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	12 v/°c
Camera included:	no	Our item no:	DKI00075
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	25 kg
Heated bed included:	yes

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Instructional video

€417.50 (coming soon)

€339.43 Excl. 23% VAT

GEEETECH A30T 3 Colour Mixing 3D Printer

Zoom in

Description The Geeetech A30T 3 Colour Mixing 3D printer supports ABS, PVA and PLA filament, among other things. The printer has room for three colours of filament, which you can alternate or combine in one print. It is also possible to add a colour gradient to your design. Mixing the colours is easy with the Colour Mixer software. The printer is equipped with a 32-bit motherboard and thanks to the 'resume printing' option, a print is automatically resumed after a power failure.

Thanks to the modular design, the printer can be built in three simple steps. The printer has a build volume of no less than 320mm x 320mm x 420mm and the open design allows you to view the print from 360°. The nozzles print with an accuracy of 0.1mm, enabling smooth surface finish and strong structure. In addition, A30T comes with a filament run-out sensor. A filament run-out sensor monitors your filament and prevents unfinished prints.

Specifications

Brand:	Geeetech	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	65.7 x 50.8 x 54.5 cm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	32 cm
Nozzle diameter:	0.4 mm	Max print height:	42 cm
Printer bed levelling:	manual	Max print volume:	43.008
Printer extruder:	bowden	Max print width:	32 cm
Extruder max temp:	250 °C	No of extruders:	3
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00061
Filament sensor:	yes	Weight:	14.3 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€427.00 (coming soon)

€347.15 Excl. 23% VAT

Creality 3D Ender-7 3D Printer

Zoom in

Description

With the Creality3D Ender 7 you can print faster than ever! It achieves a maximum print speed of 250mm/s and at the same time continues to print with very high precision. This allows you to create perfect prints on the building surface of 250mm x 250mm x 300mm in no time.

The heated print bed quickly rises to a maximum temperature of 100°C. The fast fans provide good cooling and the customised nozzle ensures perfect printing precision. The linear rail technology provides a stable printing experience. This printer has a core XY structure. This means that two parallel motors work together, allowing you to print at even higher speed and precision.

The Creality3D Ender 7 has a robust, customised motor and a super sleek design in the colour black. The design is inspired by ancient Roman columns and is a perfect mix of classic and modern.

The printer kit comes with the following:

Memory card
Accessories kit
PLA test filament
Tie wraps
Spatula
Filament holder

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	no	Heatbed max temp:	100 °C
Dimensions:	57 x 43 x 46 cm	Max print depth:	25 cm
Input voltage:	100-240V	Max print height:	30 cm
Nozzle type:	Creality Spider / Ender-7	Max print volume:	18.75
Printer bed levelling:	manual	Max print width:	25 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00073
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	17.2 kg
Heated bed included:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items
Instructional video

€437.00 (coming soon)

€355.28 Excl. 23% VAT

Creality 3D K1C 3D printer

Zoom in

Description With the K1C 3D printer from Creality 3D you can print easier and faster than ever before. The printer comes fully assembled and calibrated, so you can start printing almost immediately. Experience unparalleled printing speeds thanks to the stable CoreXY structure and lightweight print head. With an acceleration of 20,000mm/s², the Creality K1 runs up to 600mm/s in just 0.03 seconds, making it print up to 12 times faster than other FDM printers on the market. The high-quality titanium alloy hot end allows you to easily print up to 300°C. In combination with the dual-gear direct drive extruder, which has an extrusion force of 50N, you can use PLA, ABS, PETG, TPU, PA and PC, among others, on the K1C. Effortlessly switch to a hardened stainless steel nozzle to print abrasive filaments, such as PA-CF, without any problems.

This printer has all the advantages of the Creality K1 with additional functions. The K1C is equipped with an AI camera, with which you can monitor your print in real-time or make time-lapse videos. The silent fans significantly reduce noise and the air filter ensures that no harmful substances enter the air. With the improved filament detection sensor and feed, you are assured of smoothly guiding your filament and noticing any filament problems. The K1C 3D printer has a medium size with a print volume of 220mm x 220mm x 250mm. You can easily print remotely via the Creality Cloud.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	48 x 35.5 x 35.5 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	-	Max print volume:	12.1
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00220
Has CNC option:	no	Weight:	12.5 kg
Filament sensor:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€449.00 (coming soon)

€365.04 Excl. 23% VAT

Anycubic Photon Mono M5s Pro 3D printer

Zoom in

2
1
0

Description The Anycubic Photon Mono M5s Pro 3D printer is a pioneer among resin 3D printers with a stunning 10.1 inch 14K LCD screen. The screen has a resolution of 13312 x 5120 and an xy resolution of 16.8 x 24.8 µm. This allows you to see the smallest details and sharp edges in your printed model. This 3D printer has an average printing speed of 105mm/s, allowing you to produce a new 3D print very quickly. The Photon Mono M5s Pro has a high-speed ACF film with reduced peel force, giving you a higher chance of successful 3D printing.

Heat & filter module
This 3D printer is equipped with a module that heats the air and filters the air. This module can heat the air to a maximum of 40°C and keep the resin temperature above 20°C. This means you can produce high-quality prints even in a cold environment. The air filter has a carbon filter that effectively absorbs unpleasant odours released when printing with resin. This gives you a comfortable printing environment.

Smart, simple and efficient
The Photon Mono M5s Pro can detect remnants of a previous print and provide an error, so you can clean your tank before starting a new print. In addition, this 3D printer can perform a self-check, which detects whether there are hardware problems. The resin level is also monitored, so you can be sure that there is enough resin in your tank to make your 3D print.

Other functionalities
This 3D printer uses a completely new solution that makes leveling unnecessary. The platform and internal sensors will automatically make the necessary adjustments to ensure that the 3D print is uniform. Take advantage of the new version of the Anycubic app (Android & iOS), where you can find a large number of popular 3D prints that you can make.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	460 x 290 x 270 mm	Max print depth:	12.6 cm
Input voltage:	110-240V	Max print height:	20 cm
Light source:	UV LED	Max print volume:	5.619
Power rating:	110 W	Max print width:	22.3 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00248
Has CNC option:	no	Weight:	9.4 kg
Filament sensor:	no

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€459.50 (coming soon)

€373.58 Excl. 23% VAT

Creality 3D K1C 3D printer + 123-3D black & white PLA filament 1.75mm, 1kg

Zoom in

Description This pack includes the following:

Creality 3D K1C 3D printer - €449.00
123-3D black PLA filament 1.75mm, 1kg - €19.95
123-3D white PLA filament 1.75mm, 1kg - €19.95

Normally €488.90, now only €468.95 !!

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	48 x 35.5 x 35.5 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	automatic	Max print volume:	12.1
Printer extruder:	direct	Max print width:	22 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00253
Filament sensor:	yes	Weight:	12.5 kg

€468.95 (coming soon)

€381.26 Excl. 23% VAT

Flashforge Creator Pro 3D Printer

Zoom in

Description The Flashforge Creator Pro is a direct drive dual extruder 3D printer, with two independently configurable hotends. This makes it possible to print easily and quickly with two different materials, such as PLA and PVA.

Thanks to the sturdy metal frame, closed print chambers and heatbed that can be heated up to 120°C, the Creator Pro is extremely suitable for filaments that require high heatbed temperatures.

The printer is easy to operate with the clear LCD screen. In addition, it is possible to print directly from SD card, or directly from your PC via a USB connection. During printing, the print area can be illuminated with the built-in LED lighting.

The printer comes standard with Flashforge's FlashPrint software, but the printer is also compatible with other well-known slicing software.

Included with this printer:

2 spools of filament of any colour (1kg per spool)
Accessory and tool set
Acrylic cover set
4GB SD card with software and manual
USB cable

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	55 x 36 x 52.6 cm	Heatbed max temp:	120 °C
Input voltage:	100-240V	Max print depth:	22.7 cm
Nozzle diameter:	0.4 mm	Max print height:	15 cm
Power rating:	320 W	Max print volume:	5.039
Printer bed levelling:	manual	Max print width:	14.8 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	240 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DCP00049
Has CNC option:	no	Weight:	14.8 kg
Filament sensor:	yes

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€493.00 (coming soon)

€400.81 Excl. 23% VAT

Creality 3D Ender-5 Plus 3D Printer

Zoom in

Description With the Creality 3D Ender-5 Plus 3D printer kit you can easily and quickly build your own 3D printer. This model has a large print surface (350mm x 350mm x 400mm) and a clear 4.3 inch touchscreen with which you can operate the printer.

The heated print bed heats up quickly and heats up to a maximum of 110°C. The glass plate allows you to print as soon as they are ready. The print platform is very stable thanks to the double guide. Furthermore, you never have to worry about power outages again. This printer has a smart "Resume Print" function, which automatically resumes printing as soon as there is power again.

The Creality 3D Ender-5 Plus has automatic bed leveling with the BL Touch. This means that you no longer have to adjust the printer yourself and this is done completely automatically. Finally, the double Z-axis ensures firmness and a stable movement.

Included with this printer kit:

Accessories kit
Power cable
PLA test filament
Spare parts
Spatula
Nippers

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	61.9 x 63.2 x 66.6 cm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	35 cm
Nozzle diameter:	0.4 mm	Max print height:	40 cm
Nozzle type:	MK8	Max print volume:	49
Power rating:	550 W	Max print width:	35 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00031
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	18.2 kg
Filament sensor:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items
Assembly manual (video)

€493.00 (coming soon)

€400.81 Excl. 23% VAT

XYZprinting da Vinci Junior Pro X+ 3D Printer

Zoom in

Description The da Vinci Jr. Pro X+ 3D printer from XYZprinting is a reliable and versatile model. It gives you complete freedom in every creation process. In addition, the printer has useful functions and delivers high-quality 3D prints. The LCD screen provides user-friendly operation. There are two fans on the extruder that provide good cooling. This gives prints a smooth and beautiful surface.

This 3D printer has a maximum print temperature of 260°C and a build surface of 175mm x 175mm x 175mm. You can easily send print jobs via the wireless network. Thanks to the safety sensor, print jobs are automatically interrupted when the cover is open. The open filament system allows you to print with materials from other brands.

Specifications

Brand:	XYZprinting	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	80 °C
Dimensions:	38 x 42 x 43 mm	Max print depth:	17.5 cm
Input voltage:	100-240V	Max print height:	17.5 cm
Nozzle diameter:	0.4 mm	Max print volume:	5.359
Printer bed levelling:	automatic	Max print width:	17.5 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00082
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	13 kg
Heated bed included:	yes

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€495.00 (coming soon)

€402.44 Excl. 23% VAT

Anycubic 3D Photon Mono X 6K 3D Printer

Zoom in

Description The Anycubic 3D Photon Mono X 6K 3D printer has a print volume of no less than 197mm x 122mm x 245mm and can print an average 12cm model in just one and a half hours.

The screen has a contrast ratio of 350:1, so you can print sharp edges and corners. The anti-aliasing process methods have also been optimised.

With this printer you can add a lot of detail to your prints thanks to a resolution of no less than 5760 by 3600 pixels.

The printer is equipped with a 9.25" monochrome screen, with 40 bright LEDs arranged in a matrix for a powerful, parallel light source.

Specifications

Brand:	Anycubic	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	475 x 270 x 290 mm	Max print depth:	12.2 cm
Input voltage:	110-220V	Max print height:	24.5 cm
Light source:	UV LED	Max print volume:	5.888
Output current:	6 A	Max print width:	19.7 cm
Power rating:	120 W	Printing technique:	SLA DLP
Printer bed levelling:	manual	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DCP00216
Camera included:	no	Video promo:	Promotional video
Has CNC option:	no	Weight:	11 kg
Filament sensor:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Resin
Print bed accessories
Cleaning items
Instructional video

€497.00 (coming soon)

€404.07 Excl. 23% VAT

Flashforge Adventurer 5M Pro 3D printer

Zoom in

Description Your Flashforge Adventurer 5M Pro 3D printer will be ready to print within 10 minutes. This super fast printer easily achieves a print speed of up to 600mm/s. Most prints can be printed in just a few hours. The double-sided, flexible, steel build plate with PEI coating allows you to easily remove your model after printing. The construction volume is 220mm x 220mm x 220mm.

Convenience first
The automatic bed levelling system can be activated at the touch of a button. This ensures you get the perfect first layer. The 'run-out' alert indicates when the spool of filament is low and pauses the print. The 'power loss recovery' pauses the print in the event of a power failure. Both ensure that the chance of your print failing is greatly reduced.

The printer is equipped with a camera, which allows you to monitor the progress of your print from a distance. It is also possible to set the Adventurer 5M Pro to turn itself off after the print is finished. The printer makes little noise and has a maximum noise level of only 50 dB.

The printer has a 4.3-inch touchscreen with a user-friendly UI, so you can easily control the printer. Connect the printer to the FlashPrint slicing software to prepare your model for printing. With FlashCloud it is also possible to control your printer remotely.

Different materials
The direct extruder and nozzle are easy to detach. The printing temperature can reach up to 280°C. This allows many different materials to be printed, such as PLA, ABS, PETG, PL-CF and PETG-CF. This opens up a world of possibilities for your 3D prints.

A consistent, professional quality
This Flashforge printer delivers professional quality in many areas. For example, it is built with a sturdy, all-metal frame. The air purification system has double air filters for even better filtering, and the print chamber is also actively cooled. Finally, the vibration-canceling technology ensures smooth prints.

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	453 x 380 x 400 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Power rating:	350 W	Max print volume:	10.648
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	280 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00211
Has CNC option:	no	Weight:	14.6 kg
Filament sensor:	yes

€499.50 (coming soon)

€406.10 Excl. 23% VAT

XYZprinting da Vinci 1.0 Pro 3D Printer

Zoom in

Description The da Vinci 1.0 Pro is a professional 3D printer that allows you to make detailed prints. This 3D printer comes with an aluminium print bed of 200mm x 200mm x 200mm. The print bed spreads heat quickly and evenly, so prints are less likely to warp. The print area ensures consistent and impressive print quality.

You can print with various filaments such as PLA, ABS, PETG and HIPS. You also connect wirelessly to the printer. You print in a resolution of 20 to 400 microns with a maximum speed of 120 mm/s. Thanks to the open filament system, you can also print with materials from other brands.

Specifications

Brand:	XYZprinting	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	90 °C
Dimensions:	51 x 46.8 x 55.8 mm	Max print depth:	20 cm
Input voltage:	100-240V	Max print height:	20 cm
Nozzle diameter:	0.4 mm	Max print volume:	8
Printer bed levelling:	automatic	Max print width:	20 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	240 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	12 v/°c
Camera included:	no	Our item no:	DKI00083
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	23 kg
Heated bed included:	yes

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Instructional video

€517.50 (coming soon)

€420.73 Excl. 23% VAT

Elegoo Saturn 4 Ultra 16K 3D printer

Zoom in

2
1
0

Description Create stunning 3D prints with the plug-and-play Saturn 4 Ultra 16K 3D printer from Elegoo. Thanks to the 16K resolution, details are sharper than ever before. This printer has a build volume of 211.68mm x 118.37mm x 220mm, a resolution of 15120 x 6230 and a 14 x 19 µm XY resolution. With a printing speed of 150mm/h, 3D prints are quickly brought to life.

Handy & smart
The smart heating system heats the resin tank to 30˚C. This results in better layer adhesion and fluidity, which increases the quality of 3D prints. Thanks to the automatic bed levelling, the Saturn 4 Ultra is even easier to use. In addition, the 10 inch 16K Mono LCD screen offers unprecedented precision and an excellent level of detail. This means that even complicated models are printed perfectly. The screen has a robust 9H tempered glass protector, which protects it from scratches and damage. To prevent damage to the LCD screen, this 3D printer uses a smart mechanical sensor with residue detection. The sensor also gives a notification when there is a shortage of resin and when the bed is not level, so that incorrect 3D prints are prevented.

User friendly
The quick release design makes it easy to remove and replace parts. Replaceable retaining screws ensure a clog-free design, and dual pouring troughs make it even easier to pour resin from the tank. Use the reliable draining rack to work cleanly and safely. Switch between fast and slow print modes in an instant to match your printing speed to your needs.

Easily monitor the printing process in real time with the improved camera. The built-in light makes it possible to monitor your 3D print during the day and in the evening or to make time-lapse videos. In addition, a notification is given when the print deforms or when the build plate is empty. The exposure time of the different sections can be set separately, so that the optimal settings can be found, and PFA release film does not stick.

Safety
For added safety, the 3D printer automatically pauses and alerts when the LED temperature exceeds 80˚C. It is also possible to resume 3D printing after a power failure and the Saturn 4 Ultra can perform a quick self-test to ensure everything is working properly.

Other functionalities
It is possible to control multiple 3D printers, which makes workflows even more streamlined. Thanks to the laser-engraved build plate, there is a strong bed adhesion, which makes 3D prints less likely to deform or detach. However, 3D prints can be easily removed when they are finished.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Specifications

Brand:	Elegoo	Has laser option:	no
UV wavelength:	405 nm	Printer has USB:	yes
Network:	WiFi	Max print depth:	11.83 cm
Dimensions:	54.8 x 32.74 x 32.92 cm	Max print height:	22 cm
Input voltage:	100-240V	Max print volume:	5.507
Light source:	UV LCD	Max print width:	21.16 cm
Printer bed levelling:	automatic	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00322
Has CNC option:	no	Variant:	Saturn 4 Ultra 16K
Filament sensor:	no	Wavelength:	405 nm
Heated bed included:	no	Weight:	16.1 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€519.00 (coming soon)

€421.95 Excl. 23% VAT

Creality 3D K2 Combo 3D Printer

Zoom in

Description The Creality K2 Combo is a fast and compact CoreXY 3D printer with high-quality features for both demanding hobbyists and professional makers. With a print speed of up to 600mm/s, silent step-servo motors, a closed-loop design, and the Creality Filament System (CFS), this 3D printer offers excellent performance in a surprisingly compact size. With support for various filament types and automatic bed levelling, the K2 Combo is ready for modern printing challenges.

Key Features:

Building volume : 260mm × 260mm × 260mm
Print speed : up to 600mm/s
Hot end temperature : up to 300°C
CFS System: For multi-colour prints

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	573 x 445 x 477 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	26 cm
Printer bed levelling:	automatic	Max print volume:	16.95
Printer extruder:	direct	Max print width:	26 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00370
Filament sensor:	yes	Weight:	23.7 kg

€559.00 (coming soon)

€454.47 Excl. 23% VAT

Creality 3D CR-X Pro 3D Printer

Zoom in

Description The Creality 3D CR-X Pro is a dual-colour printer. It creates fantastic 3D prints with two filaments from one nozzle. This allows you to print with two different colours or two different filaments (for example with PLA and PVA).

The printer has a sleek design and the electronic components are well protected in a metal frame. In addition, this model has a auto bed level sensor and a silent motherboard with TMC2208 stepper drivers. With a print size of 300mm x 300mm x 400mm, you have plenty of room to let creative ideas run wild. The Z-axis is equipped with double screws, so that printing is very stable and precise. Thanks to the 480W Mean Well power supply, it quickly reaches the right temperature. Your creations will adhere well to the carborundum glass plate and are easy to remove. Use the two fans on the print head to instantly cool your 3D prints. Take a break while printing? That is possible with this model! You can save the printing process and resume it at a later time.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	650 x 550 x 400 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	40 cm
Nozzle type:	CRX	Max print volume:	36
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	bowden	No of extruders:	2
Extruder max temp:	250 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00053
Has CNC option:	no	Video instructions:	Instructional video
Filament sensor:	no	Weight:	15 kg

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€587.50 (coming soon)

€477.64 Excl. 23% VAT

Flashforge Adventurer 4 3D Printer

Zoom in

Description

Meet the Flashforge Adventurer 4 3D printer. It is the successor to the Flashforge Adventurer 3 and has a larger build area of 220mm x 200mm x 250mm. This 3D printer is suitable for use at home, in the office or at school.

The heated print bed quickly heats up to a maximum of 110°C. You can use this 3D printer in combination with PLA, ABS, PC, PETG, PLA-CF and PETG-CF filament. Thanks to the flexible build plate, you can quickly and easily remove 3D prints from the magnetic print bed. The nozzle heats up to 200°C within 60 seconds, so you can get started quickly. In addition, this printer has a built-in coil holder for up to 1kg and a handy filament detection sensor. Thanks to Ethernet and Wi-Fi, you can easily print remotely. You can monitor the printing process with the built-in camera.

The printer kit comes with the following:

Memory card
PLA filament
Accessories kit

Specifications

Brand:	Flashforge	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	110 °C
Dimensions:	54 x 50 x 47 cm	Max print depth:	22 cm
Input voltage:	100-240V	Max print height:	25 cm
Printer bed levelling:	semi-automatic	Max print volume:	11
Printer extruder:	bowden	Max print width:	20 cm
Extruder max temp:	265 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00074
Filament sensor:	yes	Weight:	20.1 kg
Heated bed included:	yes

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€613.00 (coming soon)

€498.37 Excl. 23% VAT

Phrozen Sonic Mighty 8K 3D printer

Zoom in

Description Does it take you a lot of time to assemble printed pieces into one large model? And do you prefer to print everything in one go, without sacrificing details? Then the Phrozen Sonic Mighty 8K 3D Printer, including a durable 10-inch monochrome LCD screen, is the printer you need. With this printer you can also print large models in detail in one go in stunning 8K resolution, with a layer thickness of 0.01mm-0.30mm. Print speeds of up to 70mm per hour are easily achieved.

The Phrozen Sonic Mighty 8K 3D Printer has a resolution of 28 micrometers and a print volume of 218mm x 123mm x 235mm and has a thick build plate on which your large and heavy 3D objects stand firmly. The linear projection of the LED module improves the light uniformity, allowing you to create beautiful and sharp models. Thanks to its compact size, you can easily store the printer. In addition, the printer is very user-friendly, which makes it suitable for everyone. So also for beginners!

Specifications

Brand:	Phrozen	Heated bed included:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	516 x 337 x 337 mm	Max print depth:	12.3 cm
Input voltage:	100-240V	Max print height:	23.5 cm
Light source:	UV LED	Max print volume:	6.301
Printer bed levelling:	manual	Max print width:	21.8 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00147
Filament sensor:	no	Weight:	14.3 kg

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€717.00 (coming soon)

€582.93 Excl. 23% VAT

Uniformation GK3 3D Printer

Zoom in

2
1
0

Description Always super sharp 3D prints with the Uniformation GK3 3D printer. The fantastic 16K 9.6 inch mono LCD screen has a resolution of 15120 x 6230 and a pixel size of 14 x 19 µm. The build volume of 211mm x 118mm x 240mm offers enough space for medium to large 3D prints. The printer comes with 3 print modes: 'precision', 'speed' and 'ultra' mode. So there is a suitable option for every 3D print.

Smart & high precision
The smart automatic resin supply system monitors the resin level and ensures that there is enough resin for making the 3D print. In addition, not only the resin level in the barrel is monitored, but also that in the cartridge so that you can replace it in time. This 3D printer uses an automatic heating system for even heating of the resin. It comes with preheating and automatic temperature detection. It also heats up to 25˚C within 25 minutes. The collimating Fresnel lens refines the 405 nm light of the COB, which makes the light refract very precisely. This improves precision and detail level in 3D prints.

User friendly
The quick release design of the build plate and resin vat make it easier to clean and replace parts. The drip tray helps to drain excess resin from the print before it cures. In addition, the touchscreen can be rotated 90˚ for easy operation. The built-in camera can be used to monitor the printing process and create time lapse videos.

Please note: LCD screens have a limited warranty. If you have any problems, check the warranty period.

Specifications

Brand:	Uniformation	Heated bed included:	no
UV wavelength:	-	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	520 x 392 x 332 mm	Max print depth:	21.1 cm
Input voltage:	110-220V	Max print height:	24 cm
Light source:	UV-COB	Max print volume:	5.975
Printer bed levelling:	manual	Max print width:	11.8 cm
3D print option:	yes	Printing technique:	SLA DLP
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00321
Filament sensor:	no	Weight:	16.5 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€755.50 (coming soon)

€614.23 Excl. 23% VAT

Creality 3D CR-5 Pro high temperature 3D Printer

Zoom in

Description

This CR-5 Pro H is a plug-and-print 3D printer from Creality. This reliable model is ideal for both personal and professional use. What makes this printer different from its predecessor (Creality CR-5 Pro)? The heat resistance! This model can withstand temperatures of up to 300°C thanks to the powerful fan and excellent heat dissipation.

This single extruder 3D printer has an extra large print volume of 300mm x 225mm x 380mm. The stable metal frame ensures accurate and high-quality 3D prints. The renewed Bowden extruder ensures a smooth and reliable filament supply and is equipped with a nozzle with a maximum temperature of 300°C. The high-quality heated bed (with carborundum glass) and the powerful fan ensure excellent heat dissipation. This makes the CR-5 Pro H suitable for almost any filament type.

The 3D printer has the following features:

Extra quiet printing thanks to the ATMEGA 2560 master chip.
Printing in very high temperatures.
Automatic levelling with the BLTouch.
Automatically resume printing after power failure.
Filament detection sensor.
Aluminium heated bed with a glass print bed.
MeanWell power supply.
Led lamps.
4.3" touchscreen for easy operation.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	61.2 x 53 x 48.7 cm	Heatbed max temp:	110 °C
Input voltage:	230CV	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	38 cm
Nozzle type:	MK8	Max print volume:	25.65
Printer bed levelling:	automatic	Max print width:	22.5 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00058
Has CNC option:	no	Weight:	32.5 kg
Filament sensor:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€550.90 (coming soon)

€447.89 Excl. 23% VAT

Creality 3D CR-30 Printmill 3D Printer

Zoom in

Description The Creality CR-30 Printmill is the world's first Creality 3D printer with a special conveyor belt that creates an infinite Z-axis. The conveyor belt ensures your prints last as long as you want. You can count on high productivity and time savings: the rotating, wear-resistant belt moves your complete print so that the printer can already start on the next one. This makes mass production easy.

But that's not the only special thing about this 3D printer. With a solid XY core structure and triangular shape, you can enjoy a stable, effective printing experience. The nozzle maintains an angle of 45°, eliminating the limitations of a vertical nozzle structure. You also benefit from the quiet main board and the fans.

The 3D printer is optimised and has built-in extras. If the voltage is accidentally lost, the print can easily be resumed as soon as the power is back on. A smart sensor has also been thought of, which detects it immediately if the filament is used up or breaks. The printer will then stop and automatically resume printing as soon as new filament is fed.

Finally, the Printmill is equipped with exclusive, user-friendly printer software and handy slicer software, called Crealitybelt.

Click here for a video explanation of the assembly.
Click here for a video explanation about levelling.
Click here for a video explanation about maintenance.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Safety datasheet:	Extra information	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	41 x 53.5 x 65.6 cm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	999 cm
Nozzle diameter:	0.4 mm	Max print height:	17 cm
Nozzle type:	MK8	Max print volume:	339.66
Power rating:	350 W	Max print width:	20 cm
Printer bed levelling:	manual	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	240 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00051
Camera included:	no	Weight:	16.5 kg
Has CNC option:	no

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€869.00 (coming soon)

€706.50 Excl. 23% VAT

Snapmaker 2.0 F250 3D Printer

Zoom in

Description The Snapmaker 2.0 F250 printer is a modular 3D printer with a large construction area of 230mm x 250mm x 235mm. The magnetic heated bed is equipped with a removable print sheet, so that the prints are easy to remove. The cooling system has been upgraded to combine speed and accuracy. This allows you to print very quickly without the quality of the prints deteriorating. With an average noise of 50 dB(A), the printer is very quiet, so you can also place it next to you to monitor the print in real time. In addition, the printer is equipped with a 5" smart touchscreen.

With this printer you get everything you need to start with 3D printing, but you can also expand the printer with various Snapmaker modules or addons for a personal touch.

Specifications

Brand:	Snapmaker	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	49 x 40.5 x 42.4 cm	Max print depth:	23 cm
Input voltage:	100-240V	Max print height:	23.5 cm
Printer bed levelling:	automatic	Max print volume:	13.512
Printer extruder:	direct	Max print width:	25 cm
Extruder max temp:	275 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00092
Filament sensor:	yes	Weight:	20.6 kg
Heated bed included:	yes

Order filament

Snapmaker 2.0 A250 double-sided magnetic 3D printing platform voor €25.50

Extra Information

3D Filament
Print bed accessories
Cleaning items

€627.90 (coming soon)

€510.49 Excl. 23% VAT

Creality 3D K2 Pro 3D printer Pre-Order

Zoom in

Description Pre-Order.

The Creality K2 Pro is an advanced, fully enclosed CoreXY 3D printer that excels in speed, stability, and material compatibility. With a generous build volume of 300mm × 300mm × 300mm and support for the Creality Filament System (CFS), this printer is ideal for creators who want to produce high-precision multicolour prints. Thanks to its sturdy aluminum frame, servo-step motors, and active heated print chamber, the K2 Pro delivers professional print results, even with demanding materials.

Key Features:

Building volume: 300mm × 300mm × 300mm
Print speed: up to 600mm/s
Hot end temperature: up to 300°C

*Please note that all pre-order delivery dates are subject to change without warning.
You can cancel your order for a refund at any time prior to delivery.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	850 x 505 x 445 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Printer bed levelling:	automatic	Max print volume:	27
Printer extruder:	direct	Max print width:	30 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00371
Filament sensor:	yes	Weight:	23.7 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€899.00 (coming soon)

€730.89 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

All 3D printers

Popular products