Buy 3D printers, filament, parts & tools | lowest prices

1
0

Description Make the most beautiful 3D prints with the Hi 3D printer from Creality. This 3D printer has a maximum print speed of 500mm/s and a maximum acceleration of 12,000mm/s², allowing you to print in no time. This printer is expandable with a CFS, allowing you to print up to 4 colours simultaneously.

User friendly
Because this 3D printer is delivered 95% pre-assembled with a handy boot-up quick guide, you can get started even faster. The movable 3.2 inch touchscreen makes it easy to operate the printer and with the camera you can easily make videos of your 3D prints and time lapse videos. In addition, the camera comes with a privacy slider, which protects your privacy. There are also no problems with noise pollution due to the noise level of ≤ 48 dB.

Useful features
Thanks to automatic bed leveling and x-axis tilt reduction, where two individual leadscrews adjust the x-axis position, you are assured of a perfect first layer every time. The 1000W heatbed can heat up to 60˚C in 30 seconds or to 100˚C in 90 seconds, so you can get started quickly. The Creality Hi indicates its status with sound. For example, a sound will be played when the printer unexpectedly pauses or has finished printing. The 3D printer uses a proprietary algorithm that actively neutralizes vibrations, allowing you to quickly create prints with a smooth surface.

Sturdy design
The Creality Hi has an all-metal design that is cast from aluminum alloy, making it very sturdy. The advanced extruder has wear-resistant metal gears that last a long time. In addition, the 'run-out' sensor monitors if the filament is broken or empty.

Multi material system upgrade
The Creality Hi can be used in combination with the Creality Filament System, or CFS. This allows you to use up to 4 colours or materials in the same 3D print, without having to change them manually. This is ideal for making vibrant prints or for making complicated prints with supports of solvent material. It is also possible to connect 4 CFS units together, so the possibilities go up to 16 colours.

Specifications

Brand:	Creality 3D	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	WiFi	Heatbed max temp:	100 °C
Dimensions:	47.7 x 40.9 x 39.2 cm	Max print depth:	26 cm
Input voltage:	110-220V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	20.28
Printer bed levelling:	automatic	Max print width:	26 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00332
Has CNC option:	no	Variant:	Without CFS
Filament sensor:	yes	Weight:	8.75 kg
Heated bed included:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€259.00 (coming soon)

€210.57 Excl. 23% VAT

Creality 3D Ender-3 S1 3D Printer

Zoom in

Description The Ender 3 S1 3D Printer is a high-quality FDM 3D printer from Creality. The printer distinguishes itself with the simplicity of installation and assembly (it can be prepared for use in just 6 steps), the 'Sprite' Direct Extruder that feeds very precise and constant filament, and the CR Touch process that automatically calibrates the print bed.

In addition, this 3D printer is virtually silent; less than 50dB of noise is produced during printing, so that you will not be disturbed by printing at night. For example, does the print stop due to a power failure or a fully unwound filament roll? Then the printing process will automatically resume as soon as the problem is solved.

The printer features dual Z-axes for smooth movement of the x-axis. When a print is ready, it can be easily removed due to the magnetic and flexible bed.

Tip: Do you want to get started with the 3D printer right away? Then it is wise to order filament separately.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	62.2 x 45.3 x 48.7 cm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	27 cm
Nozzle type:	MK8	Max print volume:	13.068
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00096
Has CNC option:	no	Weight:	9.1 kg
Filament sensor:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€240.30 (coming soon)

€195.37 Excl. 23% VAT

GEEETECH A10T 3 Colour Mixing 3D Printer

Zoom in

Description With the Geeetech A10T 3D printer you can easily combine different colours of filament. The printer has space for three colours or types, which you can alternate or combine in one print. Mixing the colours is easy with the Colour Mixer software.

Thanks to its modular design, the A10T is easy to assemble, so you can start printing quickly. The printer has a reset button that resets the settings to the ones in the G-code and thanks to the 'resume printing' option, a print is automatically resumed after a power failure.

The 3D printer has an accuracy of 0.1mm and a build volume of 220mm x 220mm x 250mm, making printing details excellently visible. The designs can be seen even better through the extruder hood with 360° ventilation design, which also ensures good heat dissipation.

The rails are made of strong, wear-resistant aluminium and, in combination with the V-shaped wheels, ensure less noise during printing. The 3-in-1 hotend is designed to significantly reduce the risk of clogging or leaks.

Specifications

Brand:	Geeetech	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	48.5 x 47.8 x 41.3 cm	Heatbed max temp:	110 °C
Input voltage:	115-230V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	manual	Max print volume:	12.1
Printer extruder:	bowden	Max print width:	22 cm
Extruder max temp:	250 °C	No of extruders:	3
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00065
Filament sensor:	yes	Weight:	7.8 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€267.50 (coming soon)

€217.48 Excl. 23% VAT

Creality 3D CR-6SE 3D Printer

Zoom in

Description The Creality CR-6SE 3D printer is easy to assemble thanks to its modular design and is now even quieter due to the Trinamic controller with ATmega-2560 chip.

The printer has a build surface of 235mm x 235mm x 250mm and is equipped with the latest 'Free-Levelling' technology, which makes manual bed leveling unnecessary! You can also easily replace and customise parts, including the nozzle, heat block and nozzle tip. The heated bed is equipped with a glass print bed for excellent heat conduction and adhesion of your 3D prints. Because the print bed can be heated to 110°C, it is also possible to print with filaments such as ABS.

The CR-6 SE has a clear 4.3" colour LCD touchscreen display and a sturdy metal frame with a double Z-axis for extra stability during printing. If there is a possible accident, such as a filament breakage, the sensors force the machine to suspend printing, and can easily be resumed as soon as the problem is fixed. In addition, this 3D printer is equipped with a filament sensor, a flexible spool holder and a handy tool box so that you always have your tools at hand.

Tip: Do you want to get started with your 3D printer right away? Then simply order filament alongside your printer.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	54 x 44.2 x 46.2 cm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	23.5 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Power rating:	350 W	Max print volume:	13.806
Printer bed levelling:	automatic	Max print width:	23.5 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00043
Has CNC option:	no	Weight:	9.5 kg
Filament sensor:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€287.50 (coming soon)

€233.74 Excl. 23% VAT

Creality 3D Ender-5 Pro 3D Printer

Zoom in

Description With the Creality 3D Ender 5 Pro 3D printer kit you can easily and quickly build your own 3D printer. This model has a medium print area (220mm x 220mm x 300mm) and a clear LCD screen to operate the printer. The transparent cube-like construction ensures you have a good view of the prints from all angles.

The heated print bed heats up quickly to a maximum of 125°C. The magnetic bonding platform makes it easy to remove your prints as soon as they are ready. The print platform is very stable thanks to the double guide. Furthermore, you never have to worry about power outages again. This printer has a smart "Resume Print" function, which automatically resumes printing as soon as there is power again.

The Creality 3D Ender-5 Pro has a metal extruder and Capricorn PTFE tube, which ensures good throughput of the filament.

The V4.2.2 Silent Mainboard with TMC2208 step drivers allows precise printing performance and quiet operation. Marlin 1.1.8 and Bootloader are installed by default. In addition, this model can handle Gcode files from the well-known slicers such as Cura, Slic3r, Repetier and Simplify3d.

Included with this printer kit:

Accessories kit
PLA test filament
Spare parts
Spatula

Note: for printing with ABS we recommend a glass plate.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	51 x 55.2 x 48.5 cm	Heatbed max temp:	125 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Nozzle type:	MK8	Max print volume:	14.52
Power rating:	270 W	Max print width:	22 cm
Printer bed levelling:	manual	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00030
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	11.8 kg
Filament sensor:	no

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Assembly manual (video)

€299.00 (coming soon)

€243.09 Excl. 23% VAT

Creality 3D Sermoon V1 3D Printer

Zoom in

Description Immediately start with 3D printing, without having to assemble or adjust parts? Then the Creality Sermoon V1 is a perfect choice.

The Sermoon V1 is a compact, closed 3D printer that is immediately ready for use. All you need to do is take the printer out of the box and plug it into the power outlet. The printer is ready to start within seconds! In addition, the one-button operation makes it ideal for novice users.

The most important features:

A build space of 175mm x 175mm x 165mm.
No leveling required.
A direct dual gear extruder.
Maximum nozzle temperature of 250°C.
Maximum bed temperature of 80°C.
Intelligent one-button control for automatic input and output.
A filament sensor and resume printing function.
A fully enclosed chassis for extra stable and secure printing.

Excellent prints
The patented direct drive dual gear extruder contains two chrome gears. These ensure a firm filament grip, even execution of the filament and accurate prints. The simple design allows you to quickly install, remove and maintain the 0.4mm nozzle. The compact cube-shaped printer has an intelligent control - the filament is inserted or removed with one click.

Intelligent sensors
The sensors of the Creality Sermoon V1 detect an unexpected power failure and then save the current printer status. Once the printer starts up again, it will automatically continue at the correct point. In addition, the printer detects running or broken filament. The 3D printer will then automatically pause and restart once the filament has been replaced.

Effortlessly remove prints
The metal, magnetic circuit board provides stability during printing. The flexible metal makes it easy to remove rounded prints.

Other specifications
You can easily operate the Creality Sermoon V1 with the 4.3 inch touchscreen. The printer can be connected via Wi-Fi and with the Creality Cloud app you can access the printer from anywhere. Thanks to the super-quiet fans and the silent IC mainboard, the printer is so quiet that you hardly notice it. The built-in, environmentally friendly LED lighting not only saves energy, but also makes it possible to monitor prints even in the evening and at night.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	no
Dimensions:	43 x 40 x 38 cm	Heatbed max temp:	80 °C
Input voltage:	100-240V	Max print depth:	17.5 cm
Nozzle type:	MK8	Max print height:	16.5 cm
Printer bed levelling:	automatic	Max print volume:	5.053
Printer extruder:	direct	Max print width:	17.5 cm
Extruder max temp:	250 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00102
Filament sensor:	yes	Weight:	11.5 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€299.00 (coming soon)

€243.09 Excl. 23% VAT

Anycubic Kobra 3 Combo 3D Printer Including Ace Pro

Zoom in

Description Bring the most colourful 3D prints to life with the Anycubic Kobra 3 Combo. This 3D printer comes with the Anycubic Ace Pro, which allows you to 3D print with up to 4 colours or types of filament at the same time. The Anycubic Ace Pro will automatically switch between colours or spools, allowing you to also use two spools of the same colour as a backup for each other.

Intelligent
The smart algorithm helps the Anycubic Ace Pro load the right filament within a minute. To prevent the filament from becoming tangled, it is guided through 4 different tubes to the extruder. There is also a constant check to see whether the filament has run out. If this is the case, the screen will provide a real-time reminder, so there is less chance of your print failing. In addition, the algorithm measures the pressure in the nozzle for smooth extrusion, layer by layer. With just the push of a button you can use the vibration compensation. This will make your prints much smoother. The Kobra 3 Combo can also easily resume printing after a power failure or running out of filament.

User friendly
This 3D printer is very easy to set up and is suitable for both beginners and advanced users. Use the automatic bed levelling to always have a perfectly level print bed. You can easily operate the printer with the touchscreen, which you can also rotate 30˚ to 60˚ for extra comfort. The nozzle goes up to 300˚C, making it suitable for many different types of filaments. In addition, it can be replaced easily and without tools. The 32 bit MCU has a silence sensor to reduce noise to a maximum of 50dB. This means you will not be bothered by noise pollution during printing.

Other functionalities
The Kobra 3 has a sturdy frame that is suitable for long-term stable printing, even at high speeds. The stylish design ensures that this printer fits well in almost any interior. With a construction volume of no less than 250mm x 250mm x 260mm and a maximum printing speed of 600mm/s, you can easily make 3D prints of different sizes. The cooling fan spins up to 7,000 rpm, so your 3D models are cooled quickly. The filament can be dried during 3D printing, so it is always in optimal condition for printing. In addition, the filament is also kept dry when you are not printing. Finally, you can easily control your 3D printer via the Anycubic app (Android & iOS)

Specifications

Brand:	Anycubic	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	483 x 505 x 453 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	26 cm
Power rating:	400 W	Max print volume:	16.25
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00263
Has CNC option:	no	Variant:	With ACE Pro
Filament sensor:	yes	Weight:	13.8 kg

€299.00 (coming soon)

€243.09 Excl. 23% VAT

€349.00 Anycubic3D rrp

Creality 3D CR-10 SE 3D printer

Zoom in

Description The Creality 3D CR-10 SE 3D printer brings out the creative in you. With a construction volume of 220mm x 220mm x 265mm, you have enough space to bring your ideas to life. This printer also has the option of high-speed printing with a maximum print speed of 600mm/s. The flexible PEI building plate ensures that you can easily remove your print when it is ready.

The perfect first layer
Choose convenience with the accurate hands-free bed levelling system that automatically adjusts the build plate. The CR Touch and a voltage sensor work together to level the build plate and set the z-offset. This makes it easy to get the perfect first layer. The first print layer of the CR-10 SE is sleek, sturdy and uniform. This way you take your print quality and success rate to a new level.

Better prints
The CR-10 SE uses advanced algorithms. The 'Input Shaping' significantly reduces the vibration of the printer, so you experience less ringing and ghosting. The 'Motion Advance' optimises the supply of filament so that there are fewer extrusion problems. It also has a dedicated fan to cool the just printed part of your model from 3 sides. This way you can print improved bridges and overhangs and details will look better. The linear rails on the x and y axes use ball bearings. These ensure that every movement is accurate and smooth. Even after prolonged use, they will continue to function optimally.

Different filaments
The hotend with 60W ceramic heater makes it possible to print without blockages. The hard steel nozzle gives you the option to print with many different types of filaments, such as PLA-CF, PA and HP-ASA. This Creality 3D printer has a 'Sprite' direct drive extruder with two gears. Filament feed and retraction are precise and uniform, even with flexible filaments.

Other functionalities
The CR-10 SE 3D printer can be monitored via your phone (using the Creality Cloud app) and via the PC. Use the printer in combination with the Creality Print slicer to get even more out of your printer. Multiple printers can be controlled simultaneously with both the Creality Cloud and Creality Print.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	work ethernet WiFi	Has laser option:	no
Dimensions:	62.5 x 49 x 47 cm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	110 °C
Nozzle diameter:	0.4 mm	Max print depth:	22 cm
Nozzle type:	MK8	Max print height:	26.5 cm
Power rating:	350 W	Max print volume:	12.826
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00199
Has CNC option:	no	Weight:	6.9 kg

€309.00 (coming soon)

€251.22 Excl. 23% VAT

Creality 3D Ender 3 V3 3D printer

Zoom in

2
1
0

Description You can get started with your Creality 3D Ender 3 V3 3D printer within 10 minutes. With this printer you choose a stable and fast 3D printer. The metal frame has die-cast parts, making this 3D printer extra stable. The CoreXZ technology ensures that the 3D printer can easily achieve speeds of 600mm/s.

Reliable extrusion & powerful cooling
Thanks to the reliable, clog-free extruder kit, this 3D printer can deliver exceptional performance. For a firm grip on the filament, the direct-drive extruder of the Ender 3 V3 is reinforced with a support spring and a ball control. The 60W ceramic heater can heat up to a maximum of 300°C within 75 seconds. This means that filaments that work with high temperatures, such as ABS and PETG, can be printed without problems. In addition, the two powerful fans provide excellent cooling during extrusion. Dripping and deformation are a thing of the past thanks to the fast and even cooling.

Choose convenience
The quick nozzle swap system makes it easy to change your tri-metal nozzle. The automatic bed leveling and the flexible, textured PEI building board make the 3D printing process even easier. The convenient 4.3-inch HD touchscreen makes it easy to control your 3D printer. You can also find other information here, such as the temperature, the leveling process and a preview of the model you want to print.

Creality OS
This 3D printer works with the open-source Creality OS, which is based on Klipper. Take advantage of the many features that come with this software or customize it to your liking. Choose Creality print, which allows you to use smart cooling, optimal retraction and smart tree supports.

Specifications

Brand:	Creality 3D	Filament sensor:	yes
Filament diameter:	1.75 mm	Heated bed included:	yes
Network:	WiFi	Has laser option:	no
Dimensions:	498 x 358 x 374 mm	Printer has USB:	yes
Input voltage:	100-240V	Heatbed max temp:	110 °C
Nozzle diameter:	0.4 mm	Max print depth:	22 cm
Nozzle type:	M6H23	Max print height:	25 cm
Power rating:	350 W	Max print volume:	12.1
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00250
Has CNC option:	no	Weight:	7.38 kg

€319.00 (coming soon)

€259.35 Excl. 23% VAT

Creality 3D Halot Mage CL-103L 3D printer

Zoom in

Description The Creality 3D Halot Mage CL-103L 3D printer is a professional UV LCD 3D printer with a large build volume of 228mm x 128mm x 230mm. The printer has an 8K mono LCD, which ensures high resolution and detailed prints. The printer has an XY resolution of 29.7µm and a Z resolution of 10-100µm, enabling it to achieve high precision and detail.

To extract and clean the dirty air from the resin, the printer has a smart air cleaner. It also has a double linear rail for the Z-axis, an exchangeable carbon filter and self-developed slicer software called HALOT BOX. The printer is compatible with various types of resin with a wavelength of 405nm.

Specifications

Brand:	Creality 3D	Filament sensor:	no
UV wavelength:	405 nm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	60.8 x 33.3 x 27 cm	Max print depth:	12.8 cm
Input voltage:	100-240V	Max print height:	23 cm
Light source:	UV LCD	Max print volume:	6.712
Power rating:	100 W	Max print width:	22.8 cm
Printer bed levelling:	manual	Printing technique:	SLA DLP
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00165
Has CNC option:	no	Weight:	12 kg

Add a smart plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

€327.00 (coming soon)

€265.85 Excl. 23% VAT

Creality 3D K1 SE 3D printer

Zoom in

Description Choose the Creality K1 SE for a fast, reliable, and user-friendly FDM 3D printing experience. This CoreXY 3D printer offers a build volume of 220mm x 220mm x 250mm and boasts impressive speeds of up to 600mm/s, with an acceleration of 20000mm/s². Thanks to its advanced input shaping algorithm and G-sensor, the K1 SE optimises motor movements to prevent vibration and reduce ghosting, ensuring high-quality prints every time. With a single click, the printer automatically calibrates, making it ready for use and allowing you to bring your creative ideas to life effortlessly.

User-Friendly Features
The K1 SE is equipped with the same flagship-level extruder kit as the K1C, ensuring smooth filament supply. Its durable tri-metal nozzle, composed of copper with a steel tip and a titanium alloy heat break, changes quickly and prevents heat creep. The filament runout sensor alerts you when filament is low, allowing for quick resolution, while the power loss recovery function lets you resume prints seamlessly after a power outage.

Advanced Functionalities
The Creality K1 SE features a 4.3-inch colour touchscreen for intuitive operation. Files can be transferred easily via USB stick or WiFi. Customise your printer by 3D printing additional components like side panels or a spool holder. The USB ports also enable easy connectivity for accessories such as webcams.

Enhance your 3D printing projects with the Creality K1 SE, combining speed, reliability, and user-friendly features in one powerful machine.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	48.2 x 35.5 x 35.5 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	automatic	Max print volume:	12.1
Printer extruder:	direct	Max print width:	22 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00272
Filament sensor:	yes	Weight:	10.24 kg

€329.00 (coming soon)

€267.48 Excl. 23% VAT

Kywoo 3D Tycoon Slim 3D Printer

Zoom in

Description The Kywoo 3D Tycoon Slim 3D Printer is a compact Cartesian FDM printer with a maximum build volume of 240mm x 240mm x 300mm. Using a direct drive extruder increases the consistency of the extrusion. The use of Linear rails in dual configuration increases stability and the printer is equipped with a belt tensioner to control the tension on the drive belts. Bed calibration is easy via a factory-built autolevel kit and the printer can be controlled via a 3.5-inch HD colour touchscreen. The interface can be set in five different languages (EN-FR-GE-SP-IT).

In the event of a power loss, the Tycoon Slim has a built-in resume function. This significantly reduces the chance of failed prints.

Specifications

Brand:	Kywoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	no
Network:	no	Heatbed max temp:	110 °C
Dimensions:	522 x 464 x 552 mm	Max print depth:	24 cm
Input voltage:	115-230V	Max print height:	30 cm
Nozzle diameter:	0.4 mm	Max print volume:	17.28
Printer bed levelling:	automatic	Max print width:	24 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00128
Has CNC option:	no	Weight:	9 kg
Filament sensor:	yes	XY precision:	0.1 mm
Heated bed included:	yes

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€235.90 (coming soon)

€191.79 Excl. 23% VAT

Creality 3D Ender-3 S1 Pro 3D Printer

Zoom in

Description The Creality 3D Ender 3 S1 Pro 3D printer is equipped with a "Sprite" direct dual gear extruder, so you can use the printer in combination with many different types of filament. In addition, the printer has a double Z-axis for more stability and safety. Lines and edges on the sides of the printed object are reduced by the Z-axis with double lead screw and double motor. The PEI magnetic print bed made of PC spring steel ensures smooth adhesion and easy removal of your print.

The printer has a 32-bit silent motherboard, making printing whisper-quiet. The 4.3 inch touchscreen ensures easy operation. The printer is already 96% pre-assembled, so you can get started quickly.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	62.5 x 45.5 x 49 cm	Heatbed max temp:	110 °C
Input voltage:	115-230V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	27 cm
Nozzle type:	MK8	Max print volume:	13.068
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00113
Has CNC option:	no	Weight:	8.6 kg
Filament sensor:	yes

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€339.00 (coming soon)

€275.61 Excl. 23% VAT

Elegoo Neptune 4 Plus 3D printer

Zoom in

Description Bring your creative ideas to life with the Elegoo Neptune 4 Plus 3D printer. Print larger models with a build volume of 320mm x 320mm x 385mm. The efficient cooling system, auto bed leveling at 11 x 11 points and the magnetic PEI build plate make it even easier for you. You can transfer your files quickly and easily via WIFI, WLAN or USB.

Fast and accurate printing
The Neptune 4 Plus comes with the powerful Klipper firmware already installed, allowing your print speed to increase to 500mm/s. The ARM 64-bit 1.5 G quad-core processor also helps with this. The acceleration sensors on the x and y axes calibrate automatically and thus improve the print quality. The dual-gear direct extruder ensures fast and precise extrusion, resulting in accurately printed models.

Different filaments
The nozzle heats up to 300℃. This also allows you to easily use materials that need to be printed at a higher temperature, such as ABS, TPU and Nylon. Using these materials gives you many more possibilities for models and prints.

Specifications

Brand:	Elegoo	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	110 °C
Dimensions:	638 x 533 x 517 mm	Max print depth:	32 cm
Input voltage:	100-240V	Max print height:	38.5 cm
Printer bed levelling:	semi-automatic	Max print volume:	39.424
Printer extruder:	direct	Max print width:	32 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00212
Filament sensor:	yes	Weight:	17.1 kg
Heated bed included:	yes

€339.00 (coming soon)

€275.61 Excl. 23% VAT

GEEETECH A20T 3 Colour Mixing 3D Printer

Zoom in

Description With the Geeetech A20T 3D printer you can easily combine different colours of filament. The printer has space for three colours or types, which you can alternate or combine in one print. It is also possible to add a colour gradient to your design. Mixing the colours is easy with the Colour Mixer software. In addition, multiple extruders also create PVA prints, making prints with difficult dimensions easier to print.

The modular design of the printer means you can set it up in three simple steps. A filament detector gives a signal when the filament is almost empty, so that you can replace it in time. Thanks to the 'resume printing' option, a print is automatically resumed after a power failure. The printer also features a reset button that resets the settings to the settings in the G-code.

The printer has a build volume of 250mm x 250mm x 250mm. The V-shaped rails are made of strong aluminium and create less noise during printing. The printer has an accuracy of 0.1mm~0.2mm, making the texture of your prints delicate. The nozzle has a diameter of 0.4mm.

Specifications

Brand:	Geeetech	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	48 x 44.2 x 44.7 cm	Heatbed max temp:	100 °C
Input voltage:	110-220V	Max print depth:	25 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Printer bed levelling:	manual	Max print volume:	15.625
Printer extruder:	bowden	Max print width:	25 cm
Extruder max temp:	250 °C	No of extruders:	3
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00059
Filament sensor:	yes	Weight:	9 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€347.00 (coming soon)

€282.11 Excl. 23% VAT

Flashforge Adventurer 3 3D Printer

Zoom in

Description The Flashforge Adventurer 3 is a Plug and Print 3D printer. This 3D printer is ready assembled and can be used immediately. The Flashforge Adventurer 3 is compact and rounded corners has a surprisingly large build area of 150mm x 150mm x 150mm. No leveling is required during printing, which prevents errors.

The Flashforge is equipped with an improved extruder with a detachable nozzle. This eliminates the need to disassemble the entire extruder for maintenance. The presence of the turbo fan provides better air circulation that helps to improve the quality of the prints.

The built-in spool holder is able to detect inserted filament and automatically load and unload the filament. The Adventurer 3 also features a built-in camera, which allows you to monitor the progress of your prints. Thanks to the removable and flexible heated bed, printed objects are easy to remove. The heated print bed makes it possible to experiment with different materials, such as PLA and PETG.

The 3D printer works with the FlashPrint software and can be connected to Wi-Fi or Ethernet. Printing via 3D Cloud or USB stick is also possible. Operation is easy via the colour touchscreen.

The printer kit comes with the following:

PLA test filament
Power cable
Screwdriver
Allen key
Unblocker tool

Specifications

Brand:	Flashforge	Has laser option:	no
Filament diameter:	1.75 mm	Printer has USB:	yes
Network:	work ethernet WiFi	Heatbed max temp:	100 °C
Dimensions:	40.5 x 34 x 38.8 cm	Max print depth:	15 cm
Input voltage:	100-240V	Max print height:	15 cm
Nozzle diameter:	0.4 mm	Max print volume:	3.375
Printer bed levelling:	semi-automatic	Max print width:	15 cm
Printer extruder:	bowden	No of extruders:	1
Extruder max temp:	240 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DKI00020
Has CNC option:	no	Weight:	9 kg
Filament sensor:	yes	XY precision:	0.011 mm
Heated bed included:	yes	Z precision:	0.0025 mm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Promotion video

€357.00 (coming soon)

€290.24 Excl. 23% VAT

AnkerMake M5C 3D Printer

Zoom in

Description Push your creative boundaries with the AnkerMake M5C 3D printer. This printer is easy to use and achieves high speeds. This makes it an ideal choice for both beginners and advanced users.

Enjoy convenience
The M5C 3D printer can be assembled in just 15 minutes and the 7x7 auto bed levelling system is easy to activate. This way you can quickly start printing. The LED indicator allows you to see the status of your printing process. The bendable and scratch-free build plate with PEI coating allows you to remove your print smoothly. In the event of a power failure, the print will automatically resume as soon as the power comes back on.

Fast and detailed
With the AnkerMake M5C you can print quickly and in detail. This printer supports high-speed printing, up to 500 mm/s when using the 'Fast Mode'. This allows you to print high-quality models in a short time. For example, a Benchy can be printed in 17 minutes. For very detailed models it is better to use the 'Precision Mode'. The S-Smoothing algorithm ensures a smooth print, even at high speed.

Printing with different materials
The printing temperature can reach up to 300°C. In addition, the M5C has a fully metal hotend, so it lasts longer. The combination ensures that you can also print with more advanced materials, such as ABS, TPU and PA-CF.

Ultra-direct extruder
The ultra-direct extruder is smaller, but just as powerful. The weight and volume of the nozzle have been greatly reduced, providing greater control over movements. The all-metal extruder hotend heats at 60 W. This makes the melting process more efficient than with other printers and filament melts faster. Double cooling has also been used, so that your print remains in perfect shape.

Other functionalities
The construction volume is 220mm x 220mm x 250mm, giving you enough space to bring your ideas to life. The software that comes with it is intuitive. You can send G-code/A-code to your printer via your phone or personal Cloud so you can start printing quickly. With the AnkerMake app you can easily set functions such as printing, leveling or pausing. You can use this to connect to your printer via Bluetooth. You can also connect and control multiple printers with this app and the AnkerMake slicer software on the PC. The frame is constructed from stable and durable aluminum alloy parts. In addition to the very good quality, it also looks stylish.

Specifications

Brand:	AnkerMake	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	48 x 46.6 x 38.4 cm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	25 cm
Nozzle type:	MK8	Max print volume:	12.1
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00198
Has CNC option:	no	Weight:	9.6 kg
Filament sensor:	yes

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€358.50 (coming soon)

€291.46 Excl. 23% VAT

Flashforge Adventurer 3 Pro 2 3D printer

Zoom in

Description With the Adventurer 3 Pro 2 from Flashforge you get a versatile 3D printer. The 265°C hardened nozzle makes it possible to print filament with carbon particles as desired. In addition, PLA, ABS and PETG can also be printed effortlessly.

Automatic bed levelling
The automatic levelling sensor is very user-friendly and levels at 9 points. The distance between the nozzle and the build plate is measured by the extruder levelling sensor and it adjusts the distance during printing. This reduces the chance that the print will fail.

New cooling system
The extruder has 3 fans and 2 pipes that lead the air to the nozzle. This specific design accelerates the cooling process during printing, which ensures better quality of the print.

Fast & silent
The Adventurer 3 Pro 2 prints at an average of 200mm per second. This can even be increased to 300mm per second when using a 0.4-240°C nozzle. The printer is equipped with a HEPA 13 air filter and prints silently, which ensures a comfortable printing experience.

Other specifications
The printer can be connected to a WiFi network, making it easy to print from the cloud. You also have the option to control multiple machines online.

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	40.5 x 34 x 38.8 cm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	15 cm
Nozzle diameter:	0.4 mm	Max print height:	15 cm
Printer bed levelling:	automatic	Max print volume:	3.375
Printer extruder:	bowden	Max print width:	15 cm
Extruder max temp:	265 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00172
Filament sensor:	yes	Weight:	9 kg

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€363.00 (coming soon)

€295.12 Excl. 23% VAT

Creality 3D Ender-3 S1 Plus 3D Printer

Zoom in

Description The Creality 3D Ender 3 S1 Plus is the big brother of the Ender 3 S1 and features a Sprite Full-metal Dual-gear direct drive extruder. This makes the printer ideal for printing flexible filaments such as TPU. The S1 Plus partly owes its name to the robust construction volume of 300mm x 300mm x 300mm. This is more than twice the volume of the Ender 3 S1.

For improved Z-axis Stability, the S1 Plus has also chosen to use two axes. This allows a layer thickness precision of 0.1mm to be achieved. The printer also contains a filament run-out sensor and auto bed level function. The interface is easy to operate via the LCD touchscreen and the X and Y axes are equipped with a belt tensioner. The printer comes with a PC magnetic flexible print bed.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	65.5 x 55.7 x 53.5 cm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	30 cm
Nozzle type:	MK8	Max print volume:	27
Printer bed levelling:	automatic	Max print width:	30 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	260 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00131
Has CNC option:	no	Weight:	10.25 kg
Filament sensor:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€367.00 (coming soon)

€298.37 Excl. 23% VAT

Creality 3D CR-6 Max 3D Printer

Zoom in

Description The Creality CR-6 MAX is a 3D printer with a modular design and an impressive build surface.

The printer is suitable for printing high objects as the construction area of 400mm x 400mm x 400mm. The robust frame with double Z-axes, diagonal support and parallel timing belts provides extra stability, limiting vibrations. Due to the modular design, all parts from nozzle to heat block can be replaced more easily, for example with the supplied spare parts.

The automatic levelling system adjusts the bed for you. The printer uses a pressure sensor on the nozzle to read and calibrate the position of the nozzle relative to the print bed. This print bed is made of silicon carbide, which ensures good heat conduction and makes it easy to remove the prints from the bed. The bed can be heated up to 90°C and is suitable for PLA and PETG filament, among other things. The integrated filament sensor timely detects a possible filament break or a problem with feeding.

The CR-6 MAX features automatic print resumption. If the printing process is interrupted by a power loss, it will automatically resume when the printer is turned on again. Finally, the printer has an integrated toolbox and a flexible spool holder.

Tip: Do you want to get started with your 3D printer right away? Then simply order 3D filament with us.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	no
Dimensions:	69.1 x 72.5 x 64 cm	Heatbed max temp:	90 °C
Input voltage:	100-240V	Max print depth:	40 cm
Nozzle diameter:	0.4 mm	Max print height:	40 cm
Nozzle type:	MK8	Max print volume:	64
Power rating:	500 W	Max print width:	40 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	260 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00052
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	15 kg
Filament sensor:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

€295.60 (coming soon)

€240.33 Excl. 23% VAT

Creality 3D Ender-5 S1 3D printer

Zoom in

Description Realize your creative ideas with the Ender 5 S1 3D printer from Creality 3D. The device has a print speed of up to 250mm/s, a motion system for 2000mm/s² acceleration and a layer height of 0.2mm. Each X/Y/Z axis is driven by the high-precision stepper motor. The full metal direct extruder has double gears and a gear ratio of 1:3.5. This makes it ideal for printing with flexible filaments such as TPU. The 3D printer is also suitable for heat-resistant technical plastic filaments such as PC, HIPS, ASA and ABS. You can also use standard filaments such as PETG and PLA. The printer has a 50 mm³ melting chamber surrounded by a large 4000 mm³ heating block. Level the printer's bed with the CR Touch auto leveler. The 3D printer is equipped with a user-friendly 4.3-inch touchscreen.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	570 x 425 x 460 mm	Heatbed max temp:	110 °C
Input voltage:	110-220V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	28 cm
Nozzle type:	Creality Spider / Ender-7	Max print volume:	13.552
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00134
Has CNC option:	no	Weight:	12.1 kg
Filament sensor:	yes

€375.00 (coming soon)

€304.88 Excl. 23% VAT

GEEETECH A30 Pro 3D Printer

Zoom in

Description The Geeetech A30 Pro 3D printer ensures high-quality prints time and time again with an accuracy of 0.1mm. The printer is equipped with a 32-bit motherboard and thanks to the 'resume printing' option, a print is automatically resumed after a power failure.

The modular design of the printer ensures that it can be set up in three simple steps. A filament run-out sensor monitors your filament and prevents unfinished prints. The printer is easy to operate using the touchscreen. Print from a computer or directly from a TF card.

The printer has a build volume of 320mm x 320mm x 420mm. The V-shaped rails are made of strong aluminium and ensure less noise during printing. The 360° ventilation ensures good cooling performance. The nozzle has a diameter of 0.4mm.

Specifications

Brand:	Geeetech	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	65.7 x 50.8 x 54.5 cm	Heatbed max temp:	100 °C
Input voltage:	115-230V	Max print depth:	32 cm
Nozzle diameter:	0.4 mm	Max print height:	42 cm
Printer bed levelling:	manual	Max print volume:	43.008
Printer extruder:	bowden	Max print width:	32 cm
Extruder max temp:	250 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	no	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00060
Filament sensor:	yes	Weight:	13.5 kg

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items

€387.00 (coming soon)

€314.63 Excl. 23% VAT

Creality 3D K2 3D printer Pre-Order

Zoom in

Description Pre-Order: This item is expected in February.

The Creality K2 is a fast and compact CoreXY 3D printer with high-quality features for both demanding hobbyists and professional makers. With a print speed of up to 600mm/s, quiet step-servo motors, and an enclosed design, this 3D printer offers excellent performance in a surprisingly compact size. With support for various filament types and automatic bed levelling, the K2 is ready for modern printing challenges.

Key Features:

Building volume: 260mm × 260mm × 260mm
Print speed: up to 600mm/s
Hot end temperature: up to 300°C

*Please note that all pre-order delivery dates are subject to change without warning.
You can cancel your order for a refund at any time prior to delivery.

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	WiFi	Printer has USB:	yes
Dimensions:	545 x 436 x 404 mm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	26 cm
Nozzle diameter:	0.4 mm	Max print height:	26 cm
Printer bed levelling:	automatic	Max print volume:	16.95
Printer extruder:	direct	Max print width:	26 cm
Extruder max temp:	300 °C	No of extruders:	1
3D print option:	yes	Printing technique:	TFDM FFF
Camera included:	yes	Printer voltage:	24 v/°c
Has CNC option:	no	Our item no:	DKI00369
Filament sensor:	yes	Weight:	18.3 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€389.00 (coming soon)

€316.26 Excl. 23% VAT

Flashforge Adventurer 5M 3D printer

Zoom in

Description The Flashforge Adventurer 5M 3D printer is ideal for bringing your creative ideas to life. The construction volume of 220mm x 220mm x 220mm offers enough space for making larger prints. The print speed can reach up to 600mm/s, meaning your prints will be ready faster. The printed circuit board has a PEI coating on both sides for easy removal of your prints.

Convenience first
The automatic bed leveling system can be activated at the touch of a button. In addition, the printer has vibration compensation to get the perfect first layer. The filament run-out sensor will stop the print before your spool of filament runs out and the 'power loss recovery' allows you to resume the print after a power failure. Both ensure that the chance of your print failing is greatly reduced.

The printer is equipped with a 4.3-inch touchscreen, with which you can control the printer. Connect the printer to the FlashPrint slicing software to prepare your model for printing. With FlashCloud it is also possible to control your printer remotely.

Improved parts
The Adventurer 5M has a new direct drive extruder and fast-heating nozzle. The nozzle can be heated to a maximum temperature of 280°C. This allows you to print different types of filament, even flexible filament, without any problems. You can change the nozzle within 3 seconds using the simple click system. The improved cooling system has a strong fan and double air ducts, which ensure more effective cooling.

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	448 x 363 x 376 mm	Heatbed max temp:	110 °C
Input voltage:	100-240V	Max print depth:	22 cm
Nozzle diameter:	0.4 mm	Max print height:	22 cm
Power rating:	350 W	Max print volume:	10.648
Printer bed levelling:	automatic	Max print width:	22 cm
Printer extruder:	direct	No of extruders:	1
Extruder max temp:	280 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	no	Our item no:	DKI00210
Has CNC option:	no	Weight:	10.8 kg
Filament sensor:	yes

€389.50 (coming soon)

€316.67 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

All 3D printers

Popular products