Bambu Lab A1

Bambu Lab AMS Lite - Automatic Material System

Description Discover a world of possibilities with the AMS lite, the multi-material system from Bambu Lab. This allows printing with multiple colours or materials at the same time. The system can also serve as an automatic filament backup.

User friendly
The automatic filament backup loads a new spool when the old spool is empty. This way the printing process is not interrupted and the spool does not have to be changed manually. Since more different materials can be used at the same time, it is also possible to print supports with a different material. This can make it easier to remove supports, for example by using a soluble filament.

The improved compatibility makes it possible to use not only Bambu Lab coils, but also cardboard coils or coils from other brands. The design makes it easy to work with the AMS lite. The transparent housing makes it extra easy to detect and solve problems.

Please note: Filaments that are too soft, brittle or abrasive cannot be used with the AMS lite.

Specifications

Brand:	Bambu Lab	Our item no:	DAR02070
Filament diameter:	1.75 mm	Weight:	1.6 kg
Dimensions:	342 x 208 x 397 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this tomorrow!

€289.50

€235.37 Excl. 23% VAT

In stock

BigTreeTech Panda Branch

Zoom in

Description Expand your possibilities with the BIQU Bigtreetech Panda Branch. You can easily connect it to the AMS of your X1/P1/A1 3D printer from Bambu Lab. This way you are protected against reverse connection and overcurrent. The red indicator light turns on immediately when detecting overcurrent, so you can quickly solve this. The handy design is easy to install. You can also 3D print a protective cover. You can use the DIP switch to switch between 1 A, 2 A and 2.7 A for 5 V outputs, so you can protect your devices well against too high current. The Panda Branch has 4 type A USB ports with a 5 V output that you can use for fans, for example. The MX3.0 2x2 pin interface can be used to connect the AMS. Connect the AMS to 1 of these ports, the other ports are redundant and only designed for AMS connection. You cannot use these ports to supply power to other devices.

Specifications

Brand:	BigTreeTech	Our item no:	DAR01859
Input voltage:	24V

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BIQU Honeycomb and Houndstooth Designer build plate for Bambu Lab printers

Zoom in

Description Add a special effect to your 3D prints with this BIQU designer build plate for Bambu Lab X1/P1/A1 3D printers. This flexible plate is made of spring steel and has a special polymer coating for improved adhesion during printing. After printing, you can easily remove your 3D print by bending the plate. The plate is printed on both sides with a honeycomb pattern on one side and a pied-de-poule pattern on the other. This way you can choose the perfect pattern for your project.

Specifications

Brand:	BIQU	Our item no:	DAR01857
Dimensions:	257 x 257 mm

€23.50

€19.11 Excl. 23% VAT

EU warehouse

BIQU CryoGrip build plate for Bambu Lab

Zoom in

Description This BIQU CryoGrip buildplate for Bambu Lab uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specifically designed to print PLA at room temperature, preventing the extruder from overheating and preventing clogging. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the plate's adhesion, simply wipe it with water. Your 3D prints can be easily removed by slightly bending the plate. The plate is 257mm x 257mm and is suitable for Bambu Lab's X1/P1/A1 3D printers. Please note: Frostbite is not suitable for ABS & TPU

Specifications

Brand:	BIQU	Our item no:	DAR01860
Dimensions:	257 x 257 mm

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Modefine 3D High temp gold PEI build plate for X1, P1, A1 series

Zoom in

Description This gold PEI building board is textured on both sides for better first layer adhesion. This means that 3D prints stay in place better during printing and you do not have to use adhesives for all materials. When the plate has cooled, prints can be easily removed. You can also bend the plate slightly to release the model. The building plate can be used for different filaments such as PLA, TPU and PC, or for materials that require a high temperature such as ABS and Nylon. This PEI is suitable for the X1, P1 and A1 series of Bambu Lab.

Specifications

Brand:	Modefine 3D	Our item no:	DAR01641
Dimensions:	0.575 x 256 x 256 mm	Weight:	0.276 kg

€27.50

€22.36 Excl. 23% VAT

EU warehouse

Bambu Lab A1 Series hot end with hardened steel nozzle, 0.4mm

Zoom in

Description This hot end with hardened steel nozzle is ideal for everyday use and has an excellent balance between print speed and quality. This makes this size a good choice for 3D printing toys, mechanical parts and decorative objects. The nozzle is 0.4mm and is suitable for the A1 series 3D printers from Bambu Lab.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01863
Material:	Steel	Screwthread type:	-

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this tomorrow!

€15.50

€12.60 Excl. 23% VAT

In stock

Bambu Lab A1 Series hot end with hardened steel nozzle, 0.6mm

Zoom in

Description This hot end with hardened steel nozzle is ideal for printing with more specialised materials, such as filaments with added glass or carbon fibres. Your printing time is also reduced because the diameter is larger than the standard 0.4mm nozzle. This makes this size a good choice for 3D printing larger parts, functional parts and industrial parts. The nozzle is 0.6mm and is suitable for the A1 series 3D printers from Bambu Lab.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR01864
Material:	Steel	Screwthread type:	-

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€15.50

€12.60 Excl. 23% VAT

EU warehouse

Bambu Lab A1 Series hot end with hardened steel nozzle, 0.8mm

Zoom in

Description This hot end with hardened steel nozzle is ideal for printing with filaments that have added particles, such as glass or carbon fibres. In addition, the printing time is reduced because the diameter is larger than the standard 0.4mm nozzle. This makes this size a good choice for 3D printing larger parts, functional parts, industrial parts and 3D models that need to be strong. The nozzle is 0.4mm and is suitable for the A1 series 3D printers from Bambu Lab.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR01865
Material:	Steel	Screwthread type:	-

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€15.50

€12.60 Excl. 23% VAT

EU warehouse

Bambu Lab A1 Series hot end with stainless steel nozzle, 0.2mm

Zoom in

Description This hot end with stainless steel nozzle is ideal for printing small and fine models. Due to the small diameter, it can be printed very precisely and details will be clearly visible. However, this can increase the printing time. This makes this size suitable for 3D printing miniatures, complex logos, text and molds. The nozzle is 0.2mm and is suitable for the A1 series 3D printers from Bambu Lab.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR01866
Material:	Stainless steel	Screwthread type:	-

Nozzle diameter:

0.2 mm

0.4 mm

Order now, we can ship this tomorrow!

€15.50

€12.60 Excl. 23% VAT

In stock

Bambu Lab A1 Series hot end with stainless steel nozzle, 0.4mm

Zoom in

Description This hot end with stainless steel nozzle is ideal for everyday use and has an excellent balance between print speed and quality. This makes this size a good choice for 3D printing toys, mechanical parts and decorative objects. The nozzle is 0.4mm and is suitable for the A1 series 3D printers from Bambu Lab.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01867
Material:	Stainless steel	Screwthread type:	-

Nozzle diameter:

0.2 mm

0.4 mm

Order now, we can ship this tomorrow!

€15.50

€12.60 Excl. 23% VAT

In stock

Bambu Lab A1 Series Silicone Hotend Sock

Zoom in

Description This silicone hotend sock from Bambu Lab is made of high-quality materials and can withstand temperatures of up to 300˚C. Thanks to this sock, the hotend has a consistent temperature during 3D printing and there is less chance of filament sticking. This product is suitable for the A1 series from Bambu Lab and contains the following parts:

3 x Hotend Silicone Sock

Specifications

Brand:

Bambu Lab

Our item no:

DAR01976

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€4.95

(coming soon)

€4.02 Excl. 23% VAT

Bambu Lab A1 Heatbed Nozzle Wiper

Zoom in

Description This heatbed nozzle wiper from Bambu Lab is ideal for cleaning your nozzle before starting a new 3D print. This way your nozzle is always in optimal condition for making fantastic 3D prints. This product is suitable for the A1 from Bambu Lab and contains the following parts:

3 x Heatbed Nozzle Wiper – A1

Specifications

Brand:

Bambu Lab

Our item no:

DAR01977

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€4.95

(coming soon)

€4.02 Excl. 23% VAT

Bambu Lab A1 Series Hardened Steel Extruder Gear Assembly

Zoom in

Description This Bambu Lab Hardened Steel Extruder Gear Assembly is an internal part of the extruder unit. The materials are of high quality and specially designed for long term use. In case of wear or blockage this assembly can be easily replaced, so the entire extruder does not have to be replaced. This product consists of a driven gear and an active gear and is suitable for the A1 series of Bambu Lab and contains the following parts:

1 x Extruder Gear Assembly
1 x Ball Bearing

Specifications

Brand:

Bambu Lab

Our item no:

DAR01979

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.50

(coming soon)

€10.98 Excl. 23% VAT

Bambu Lab A1 Series Purge Wiper

Zoom in

Description This Purge Wiper from Bambu Lab is perfect for efficiently removing waste that is emitted by the hotend of the 3D printer. Leftover filament or filament during colour changes are collected so that the printing process runs seamlessly. This product is suitable for the A1 series from Bambu Lab.

1 x Purge Wiper

Specifications

Brand:

Bambu Lab

Our item no:

DAR01981

Order now, we can ship this tomorrow!

€8.50

€6.91 Excl. 23% VAT

In stock

Bambu Lab A1 Series Filament Sensor

Zoom in

Description This filament sensor from Bambu Lab monitors the status of the filament supply, preventing printing errors and increasing efficiency. When printing with an AMS Lite, the input and output of filaments can be recognised. Blockages can also be detected. This product is suitable for the A1 series from Bambu Lab and contains the following components:

1 x Filament Sensor
2 x BT2-5 screws

Specifications

Brand:

Bambu Lab

Our item no:

DAR01982

€7.95

€6.46 Excl. 23% VAT

EU warehouse

Bambu Lab A1 Series Part Cooling Fan

Zoom in

Description This Part Cooling Fan from Bambu Lab cools filament quickly after it has been extruded. This way, layers are properly cooled before a new layer is added on top. This product is suitable for the A1 series from Bambu Lab and contains the following parts:

1 x Part Cooling Fan
2 x BT2-5 screws
1 x BT2-4 screws
2 x M2-2 screws

Specifications

Brand:

Bambu Lab

Our item no:

DAR01983

€14.50

€11.79 Excl. 23% VAT

EU warehouse

Bambu Lab A1 Series Extruder Unit

Zoom in

Description This Bambu Lab Extruder Unit has double gears to guide the filament to the hotend. Thanks to the hardened steel gears, there is a higher extrusion force, improved wear resistance and less filament slippage. This also allows for printing more special filaments, such as nylon with carbon or glass fibers. This product is suitable for the A1 series of Bambu Lab and contains the following parts:

1 x Extruder Unit (including filament cutter and extruder motor)
2 x M2-2 screws
2 x BT2-3 screws
2 x M3-10 screws

Specifications

Brand:

Bambu Lab

Our item no:

DAR01984

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€43.50

(coming soon)

€35.37 Excl. 23% VAT

Bambu Lab A1 Series Print Head Front Cover

Zoom in

Description This Print Head Front Cover from Bambu Lab protects the front of the print head. This product is suitable for the A1-series from Bambu Lab and contains the following parts:

1 x Print Head Front Cover

Specifications

Brand:

Bambu Lab

Our item no:

DAR01985

€5.95

€4.84 Excl. 23% VAT

EU warehouse

Bambu Lab A1 Series Hotend Cooling Fan

Zoom in

Description This Bambu Lab Hotend Cooling Fan is an original replacement part and cools both the hotend heating assembly and the hotend. This product is suitable for the A1-series of Bambu Lab and contains the following parts:

1 x Hotend Cooling Fan
2 x BT2-4 screws

Specifications

Brand:

Bambu Lab

Our item no:

DAR01986

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€16.50

(coming soon)

€13.41 Excl. 23% VAT

Bambu Lab A1 Y-axis belt

Zoom in

Description This Bambu Lab Y-axis belt connects the y-axis motor to the heatbed, allowing it to move smoothly in the y-direction. When worn out due to prolonged use, it is important to replace this belt for optimal operation of the 3D printer. This product is suitable for the Bambu Lab A1 and contains the following parts:

1 x y-axis belt

Specifications

Brand:

Bambu Lab

Our item no:

DAR01987

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€10.50

(coming soon)

€8.54 Excl. 23% VAT

Bambu Lab A1 X-axis belt

Zoom in

Description This Bambu Lab X Belt connects the x-axis motor to the tool head, allowing it to move smoothly in the x-direction. When worn out due to prolonged use, it is important to replace this belt for optimal operation of the 3D printer. This product is suitable for the Bambu Lab A1 and contains the following parts:

1 x x-axis belt

Specifications

Brand:

Bambu Lab

Our item no:

DAR01988

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€10.50

(coming soon)

€8.54 Excl. 23% VAT

Bambu Lab A1 Z-axis belt

Zoom in

Description This Bambu Lab Z-axis belt drives the lead screws for consistent movement on the z-axis. When worn out due to prolonged use, it is important to replace this belt for optimal operation of the 3D printer. This product is suitable for the Bambu Lab A1 and contains the following parts:

1 x Z-axis belt

Specifications

Brand:

Bambu Lab

Our item no:

DAR01989

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€6.95

(coming soon)

€5.65 Excl. 23% VAT

Bambu Lab A1 Series Filament Cutter Lever

Zoom in

Description This Bambu Lab Filament Cutter Lever holds the filament cutter and the detection magnet in place. When the filament is cut, the lever automatically jumps back to the right place. Check the lever if you have problems cutting filament or if the lever shows defects. This product is suitable for the Bambu Lab A1 series and contains the following parts:

1 x Filament Cutter Lever

Specifications

Brand:

Bambu Lab

Our item no:

DAR01992

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€5.50

(coming soon)

€4.47 Excl. 23% VAT

Bambu Lab A1 Series and AMS lite Screws Kit

Zoom in

Description This Bambu Lab Screws Kit contains the most common screws for the A1 series 3D printers and AMS lite from Bambu Lab. This product contains the following parts:

10 x M2x2.5 FHCS (Machine Screw)
10 x M2.5x5 FHCS (Machine Screw)
20 x BT2x5 SHCS (Self Tapping Screw)
10 x BT2.6x5 SHCS (Self Tapping Screw)
20 x BT2.3x7 SHCS (Self Tapping Screw)
10 x BT2x8 SHCS (Self Tapping Screw)
5 x BT2.6x14 SHCS (Self Tapping Screw)
10 x Stainless Steel Flat Washer
10 x BT2.6x8 SHCS (Self Tapping Screw)
10 x BT3x8 SHCS (Self Tapping Screw)
10 x BT3x12 SHCS (Self Tapping Screw)
5 x M3x12 FHCS (Machine Screw)
20 x BT2x13 SHCS (Self Tapping Screw)
5 x 0.9x11 mm Helical Compression Spring

Specifications

Brand:

Bambu Lab

Our item no:

DAR01993

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this tomorrow!

€12.50

€10.16 Excl. 23% VAT

In stock

Bambu Lab A1 PTFE Tube Connector

Zoom in

Description This PTFE Tube Connector is an original replacement part from Bambu Lab. It is connected to the x-axis motor housing and can be removed together with the pneumatic connector. This product is suitable for the A1 from Bambu Lab and contains the following parts:

1 x PTFE Tube Connector

Specifications

Brand:

Bambu Lab

Our item no:

DAR01994

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€8.50

(coming soon)

€6.91 Excl. 23% VAT

Bambu Lab A1 Supportive Footpad

Zoom in

Description This Supportive Footpad supports the 3D printer and reduces vibrations. This product is suitable for the A1 from Bambu Lab and contains the following parts:

4 x Supportive Footpad

Specifications

Brand:

Bambu Lab

Our item no:

DAR01995

€6.95

€5.65 Excl. 23% VAT

EU warehouse

Bambu Lab A1 Spool Holder

Zoom in

Description This Bambu Lab Spool Holder can be used when the A1 is used for 3D printing without the AMS Lite. This product is suitable for the A1 from Bambu Lab and contains the following parts:

1 x Spool Holder

Specifications

Brand:

Bambu Lab

Our item no:

DAR01997

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.50

(coming soon)

€10.98 Excl. 23% VAT

Bambu Lab A1 Series Toolhead Board

Zoom in

Description This Toolhead Board is an original replacement part from Bambu Lab. This product is suitable for the A1 series from Bambu Lab and contains the following parts:

1 x Toolhead Board
4 x M2-2 Screws

Specifications

Brand:

Bambu Lab

Our item no:

DAR02000

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.50

(coming soon)

€21.54 Excl. 23% VAT

Bambu Lab Bambu A1 USB-C cable

Zoom in

Description This Bambu USB-C cable is an original replacement part from Bambu Lab. This product is suitable for the A1 from Bambu Lab and contains the following parts:

1 x Bamboo USB-C Cable

Specifications

Brand:

Bambu Lab

Our item no:

DAR02001

€10.50

(coming soon)

€8.54 Excl. 23% VAT

Bambu Lab A1 Live View Camera

Zoom in

Description This Bambu Lab Live View Camera is an original replacement part from Bambu Lab. The low-FPS camera can be used for remote livestreams or timelapse videos. This product is suitable for the A1 from Bambu Lab and contains the following parts:

1 x Live View Camera

Specifications

Brand:

Bambu Lab

Our item no:

DAR02002

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€41.50

(coming soon)

€33.74 Excl. 23% VAT

Bambu Lab A1 Series Toolhead Rear Housing

Zoom in

Description This Bambu Lab Toolhead Rear Housing protects the back of the printhead. This product is suitable for the A1-series of Bambu Lab and contains the following parts:

1 x Toolhead Rear Housing
1 x Left Wire Cover
1 x Right Wire Cover

Specifications

Brand:

Bambu Lab

Our item no:

DAR02005

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Bambu Lab A1 Touch Screen

Zoom in

Description This Touch Screen is an original replacement part from Bambu Lab. This product is suitable for the A1 from Bambu Lab and contains the following parts:

1 x Touch Screen

Specifications

Brand:

Bambu Lab

Our item no:

DAR02015

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€42.50

(coming soon)

€34.55 Excl. 23% VAT

Bambu Lab A1 Series Toolhead Block

Zoom in

Description This Toolhead Block is an original replacement part from Bambu Lab. This product is suitable for the A1 series from Bambu Lab and contains the following parts:

1 x Toolhead Block

Specifications

Brand:

Bambu Lab

Our item no:

DAR02017

€10.50

(coming soon)

€8.54 Excl. 23% VAT

Bambu Lab A1 Series Extruder Motor

Zoom in

Description This Extruder Motor is an original replacement part from Bambu Lab. This product is suitable for the A1-series from Bambu Lab and contains the following parts:

1 x Extruder Motor

Specifications

Brand:

Bambu Lab

Our item no:

DAR02018

€48.50

(coming soon)

€39.43 Excl. 23% VAT

Bambu Lab A1 Series Filament Sensor Base

Zoom in

Description This Filament Sensor Base is an original replacement part from Bambu Lab. This product is suitable for the A1-series from Bambu Lab and contains the following parts:

1 x Filament Sensor Base

Specifications

Brand:

Bambu Lab

Our item no:

DAR02023

€5.50

(coming soon)

€4.47 Excl. 23% VAT

Bambu Lab Lubricant Oil

Zoom in

Description This Bambu Lab Lubricant Oil can be used to lubricate rails and steel axles. This product contains the following components:

6 x Lubricant Oil (3g)

Specifications

Brand:

Bambu Lab

Our item no:

DAR02024

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€9.95

(coming soon)

€8.09 Excl. 23% VAT

Bambu Lab Lubricant Grease

Zoom in

Description This Bambu Lab Lubricant Grease can be used to lubricate lead screws or reduce noise. This product contains the following components:

6 x Lubricant Grease (1g)

Specifications

Brand:

Bambu Lab

Our item no:

DAR02025

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€5.50

(coming soon)

€4.47 Excl. 23% VAT

Bambu Lab AMS lite Filament Hub

Zoom in

Description This Bambu Lab AMS lite Filament Hub is essential for reliable filament changes during 3D printing with multiple colours or materials. The hub connects to 4 different PTFE tubes to guide the filament to the extruder. This product is suitable for the Bambu Lab AMS lite and contains the following parts:

1 x AMS lite Filament Hub
1 x Buckle (to attach the hub to the tool head)

Specifications

Brand:

Bambu Lab

Our item no:

DAR02026

€10.95

(coming soon)

€8.90 Excl. 23% VAT

Bambu Lab AMS lite Rotary Spool Holder (yellow)

Zoom in

Description This Bambu Lab AMS lite Rotary Spool Holder (yellow) holds the spool when used in combination with the AMS lite. Each spool has 3 clamps to hold the spool in place. This is the yellow version, where the spool holder can be installed on the roller at the bottom left or top right to feed filament to slot 2 or 4. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Rotary Spool Holder (yellow)

Please note: this spool holder is only suitable for the roller on the bottom left or top right to feed filament to slot 2 or 4. If you need a roller for the bottom right or top left, order the green version.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02027

€15.95

(coming soon)

€12.97 Excl. 23% VAT

Bambu Lab AMS lite 4-pin cable

Zoom in

Description This Bambu Lab AMS lite 4-pin Cable connects the A1 3D printer to the AMS lite. This controls both power and exchanges communication. This product is suitable for the AMS lite from Bambu Lab and contains the following components:

1 x AMS Lite 4-pin Cable

Specifications

Brand:

Bambu Lab

Our item no:

DAR02028

€12.95

(coming soon)

€10.53 Excl. 23% VAT

Bambu Lab AMS lite Filament Funnel Unit (left)

Zoom in

Description This Bambu Lab AMS lite filament Funnel Unit (left) is an internal part of the AMS lite feeder unit. This is the left version that works with slot 1 and 2. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Filament Funnel Unit (left)

Please note: the left and right filament funnel units are not interchangeable. So check carefully which one you need before ordering. This product is the left filament funnel unit and can only be used for slots 1 and 2. If you need filament funnel units for slots 3 and 4, order the right filament funnel unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02029

€21.95

(coming soon)

€17.85 Excl. 23% VAT

Bambu Lab AMS Lite Spool Claw

Zoom in

Description This Bambu Lab AMS Lite Spool Claw is used to hold the spool in place. The rubber pads on the bottom increase friction so the spool doesn't come loose from the spool holder during 3D printing. This product is compatible with the Bambu Lab AMS Lite and contains the following components:

3 x AMS lite Spool Claw

Specifications

Brand:

Bambu Lab

Our item no:

DAR02030

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.95

(coming soon)

€10.53 Excl. 23% VAT

Bambu Lab AMS lite Feeder Unit (left)

Zoom in

Description This Bambu Lab AMS lite Feeder Unit (left) supports the AMS lite when printing with multiple colours and materials. This is the left version that works with slot 1 and 2. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Feeder Unit (left)

Please note: this feeder unit can only be used for slots 1 and 2. If you need a feeder unit for slots 3 and 4, order the right feeder unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02031

€87.50

(coming soon)

€71.14 Excl. 23% VAT

Bambu Lab AMS lite Housing Assembly

Zoom in

Description This Bambu Lab AMS lite Housing Assembly is the housing of the AMS lite. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Housing Assembly

Specifications

Brand:

Bambu Lab

Our item no:

DAR02032

€40.50

(coming soon)

€32.93 Excl. 23% VAT

Bambu Lab AMS lite Mainboard

Zoom in

Description This AMS Lite motherboard is a genuine replacement part from Bambu Lab. This product is suitable for the Bambu Lab AMS Lite and contains the following components:

1 x AMS lite Mainboard

Specifications

Brand:

Bambu Lab

Our item no:

DAR02033

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€59.50

(coming soon)

€48.37 Excl. 23% VAT

Bambu Lab AMS lite Feeder Support

Zoom in

Description This Bambu Lab AMS Lite Feeder Support connects two feeder units. This product is suitable for the Bambu Lab AMS Lite and includes the following components:

1 x AMS lite Feeder Support

Specifications

Brand:

Bambu Lab

Our item no:

DAR02034

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€11.50

€9.35 Excl. 23% VAT

EU warehouse

Bambu Lab AMS Lite Feeder Cap

Zoom in

Description This AMS Lite Feeder Cap is a genuine replacement part from Bambu Lab. This product is marked with numbers 1 through 4 and is suitable for the Bambu Lab AMS Lite. It contains the following components:

1 x AMS lite Feeder Cap

Specifications

Brand:

Bambu Lab

Our item no:

DAR02035

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€9.95

(coming soon)

€8.09 Excl. 23% VAT

Bambu Lab AMS lite Feeder Motor

Zoom in

Description This AMS Lite Feeder Motor is a genuine replacement part from Bambu Lab. This product is suitable for the Bambu Lab AMS Lite and includes the following components:

1 x AMS lite Feeder Motor

Specifications

Brand:

Bambu Lab

Our item no:

DAR02036

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.50

(coming soon)

€10.16 Excl. 23% VAT

Bambu Lab AMS Lite Stand

Zoom in

Description This AMS Lite Stand is a genuine replacement part from Bambu Lab. This product is suitable for the Bambu Lab AMS Lite and includes the following components:

1 x AMS lite Stand

Specifications

Brand:

Bambu Lab

Our item no:

DAR02037

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€23.95

(coming soon)

€19.47 Excl. 23% VAT

Bambu Lab AMS lite Rotary Spool Holder (green)

Zoom in

Description This Bambu Lab AMS lite Rotary Spool Holder (green) holds the spool when used in combination with the AMS lite. Each spool has 3 clamps to hold the spool in place. This is the green version, where the spool holder can be installed on the roller on the bottom right or top left to feed filament to slot 1 or 3. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Rotary Spool Holder (green)

Please note: this spool holder is only suitable for the roller on the bottom right or top left to feed filament to slot 2 or 4. If you need a roller for the bottom left or top right, order the yellow version.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02067

€15.95

(coming soon)

€12.97 Excl. 23% VAT

Bambu Lab AMS lite Filament Funnel Unit (right)

Zoom in

Description This Bambu Lab AMS lite filament Funnel Unit (right) is an internal part of the AMS lite feeder unit. This is the right version that works with slot 3 and 4. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Filament Funnel Unit (right)

Please note: the left and right filament funnel units are not interchangeable. So check carefully which one you need before ordering. This product is the right filament funnel unit and can only be used for slots 3 and 4. If you need filament funnel units for slots 1 and 2, order the left filament funnel unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02068

€22.50

(coming soon)

€18.29 Excl. 23% VAT

Bambu Lab AMS lite Feeder Unit (right)

Zoom in

Description This Bambu Lab AMS lite Feeder Unit (right) supports the AMS lite when printing with multiple colours and materials. This is the right version that works with slot 3 and 4. This product is suitable for the AMS lite from Bambu Lab and contains the following parts:

1 x AMS lite Feeder Unit (right)

Please note: this feeder unit can only be used for slots 3 and 4. If you need a feeder unit for slots 1 and 2, order the left feeder unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR02069

€89.50

(coming soon)

€72.76 Excl. 23% VAT

BIQU Panda Shelter

Zoom in

Description This Panda Shelter is a transparent dust and water resistant enclosure for the Bambu Lab A1 and A1 mini 3D printers from Bambu Lab. Thanks to this enclosure, the temperature remains constant during printing, which increases the quality and stability of prints. The enclosure is CPAI-84 certified for extra fire safety and keeps out toxic particles, dust and fumes, which ensures a cleaner working environment.

Handy
This enclosure is large enough for the A1 series of Bamboo Lab, with a size of 84cm x 58cm x 58cm. In addition, the 3D printer can be monitored during printing through the transparent sides. The handy tool compartments make it easy to keep important tools close to the printer. The built-in temperature and humidity meter shows the status of the environment inside the enclosure so that it can be adjusted if it is not to your liking. Use the mesh pockets on the inside to store desiccants or activated carbon. The Panda Shelter contains the following parts:

1 x protective cover
1 x Temperature and humidity meter
8 x Long Fiberglass Rods
16 x Short Fiberglass Rods
8 x right angle T-connections
12 x straight connections

Please note: for optimal functioning of the Panda Shelter it must be used in combination with the Ventilation Kit for the Panda Shelter.

Specifications

Brand:	BIQU	Our item no:	DAR02081
Dimensions:	580 x 580 x 840 mm

€97.50

€79.27 Excl. 23% VAT

EU warehouse

BIQU Ventilation Kit for Panda Shelter

Zoom in

Description This ventilation kit is meant to be used in combination with the Panda Shelter from BIQU. Together they ensure that the temperature remains the same for an improved quality of 3D prints. The housing is also fireproof and keeps out toxic substances and fumes, which ensures a safe working environment.

Specifications

Brand:

BIQU

Our item no:

DAR02082

€27.50

€22.36 Excl. 23% VAT

EU warehouse

BIQU CryoGrip Pro Glacier Buildplate, 257mm x 257mm Suitable for X1 / P1 / A1

BIQU CryoGrip Pro Glacier Buildplate, 257mm x 257mm DAR02084

Zoom in

Description This BIQU CryoGrip Pro Glacier buildplate for Bambu Lab uses a revolutionary 7-layer design. This allows you to print at room temperature with excellent first layer adhesion. This makes it easy to achieve fantastic results without warping.

7 layer design
The 7 layers of this plate work together to deliver excellent performance. The middle layer is made of ferromagnetic spring steel to prevent warping of your prints. Also, the edges of the plate will not lift when making large 3D prints. On both sides of this plate is a layer that ensures improved adhesion between the spring steel and the top coat. This is followed by an impact and corrosion resistant layer on both sides. Finally, both the top and bottom of the plate have a special coating for extra strong adhesion.

Other functionalities
This plate is specially designed to print various filaments including ABS, TPU and PA at room temperature, preventing the extruder from overheating and clogging. It has a fine texture and good filament adhesion. With only 50W consumption, this plate is a more sustainable choice than standard heated printing plates. To restore the adhesion of the plate, you can simply wipe it with water. Your 3D prints can be easily removed by slightly bending the plate. The plate is 257mm x 257mm and is suitable for the X1/P1/A1 3D printer from Bambu Lab.

Please note: The Glacier buildplate can be used for PLA and PETG, but excels with other materials. If you plan on printing with PLA and/or PETG only, the Frostbite buildplate is also an excellent choice. It has a rougher texture and offers fantastic adhesion to PLA and PETG.

Specifications

Brand:	BIQU	Our item no:	DAR02084
Dimensions:	257 x 257 mm	Variant:	X1 Carbon / P1P / P1S / A1

€32.95

€26.79 Excl. 23% VAT

EU warehouse

Modefine 3D A1 Series Hardened Nozzle, 0.2mm

Zoom in

Description The Modefine 3D A1 Series Hardened Nozzle with a diameter of 0.2mm is specifically designed for users seeking high precision and durability in their 3D prints. Thanks to the use of hardened steel and an innovative copper core, this nozzle offers excellent performance, even when printing with abrasive materials.

Key Features:

Nozzle diameter: 0.2mm
Material: Hardened steel with copper core
Maximum temperature: up to 400°C

Specifications

Brand:	Modefine 3D	Our item no:	DAR02092
Filament diameter:	1.75 mm	Quantity:	1
Nozzle diameter:	0.2 mm

€10.95

€8.90 Excl. 23% VAT

EU warehouse

Modefine 3D A1 Series Hardened Nozzle, 0.4mm

Zoom in

Description The Modefine 3D A1 Series Hardened Nozzle with a diameter of 0.4mm is specifically designed for users seeking high precision and durability in their 3D prints. Thanks to the use of hardened steel and an innovative copper core, this nozzle offers excellent performance, even when printing with abrasive materials.

Key Features:

Nozzle diameter: 0.4mm
Material: Hardened steel with copper core
Maximum temperature: up to 400°C

Specifications

Brand:	Modefine 3D	Our item no:	DAR02093
Filament diameter:	1.75 mm	Quantity:	1
Nozzle diameter:	0.4 mm

€10.95

€8.90 Excl. 23% VAT

EU warehouse

Bambu Lab Makers Supply Triple-axis Tourbillon Model Components Kit 007

Zoom in

Description This hardware kit contains everything you need to make a triple axis tourbillon model. To make the complete model, you also need to download and print the parts of the model. The kit contains:

3 x M2x6 FHCS (Machine Screw)
24 x M2x8 FHCS (Machine Screw)
11 x M2x10 FHCS (Machine Screw)
2 x M2x12 FHCS (Machine Screw)
1 x M2x14 FHCS (Machine Screw)
8 x M2.5x6 BHCS (Machine Screw)
2 x M3x23 SHCS (Machine Screw)
6 x MR52 Steel Deep Groove Ball Bearing
1 x 6704 Steel Deep Groove Ball Bearing
1 x F8-14M Miniature Plane Thrust Ball Bearing
6 x MR128 Steel Deep Groove Ball Bearings
16 x 6mm Stainless Steel Ball
1 x 2*13mm Brass Dowel Pin
1 x 2*22mm Brass Dowel Pin
1 x 2*32mm Brass Dowel Pin
1 x TT Motor (DC5V 59RPM CCW Single Axis)

Please note: this kit only contains the mechanical parts. The other parts need to be 3D printed by yourself. Also always use a USB power supply with the correct voltage.

Tip: Check the mechanism before connecting it to the power. This can easily be done by turning the handle. Always make sure that the motor is not blocked.

Specifications

Brand:	Bambu Lab	Voltage:	5 v
Our item no:	DAR02097	Weight:	0.079 kg

€44.50

€36.18 Excl. 23% VAT

EU warehouse

Bambu Lab Makers Supply Jet Engine Kit Collection

Zoom in

Description This hardware kit contains everything you need to make an engine model. To make the complete model, the parts of the model must also be downloaded and printed. This kit contains:

80 x M2.5x10 SHCS (Machine Screw)
80 x M2.5 Stainless Steel Hex Nut
150 x M2.5x5x0.5 Stainless Steel Flat Washer
2 x 6204 Plastic Deep Groove Ball Bearing
2 x 6003 Plastic Deep Groove Ball Bearing

Specifications

Brand:

Bambu Lab

Our item no:

DAR02098

Please note: The delivery time for this item is currently unknown.

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Modefine 3D A1 Series Hardened Nozzle, 0.6mm

Zoom in

Description The Modefine 3D A1 Series Hardened Nozzle with a diameter of 0.6mm is specifically designed for users seeking high precision and durability in their 3D prints. Thanks to the use of hardened steel and an innovative copper core, this nozzle offers excellent performance, even when printing with abrasive materials.

Key Features:

Nozzle diameter: 0.6mm
Material: Hardened steel with copper core
Maximum temperature: up to 400°C

Specifications

Brand:	Modefine 3D	Our item no:	DAR02099
Filament diameter:	1.75 mm	Quantity:	1
Nozzle diameter:	0.6 mm

€10.95

€8.90 Excl. 23% VAT

EU warehouse

Modefine 3D A1 Series Hardened Nozzle, 0.8mm

Zoom in

Description The Modefine 3D A1 Series Hardened Nozzle with a diameter of 0.8mm is specifically designed for users seeking high precision and durability in their 3D prints. Thanks to the use of hardened steel and an innovative copper core, this nozzle offers excellent performance, even when printing with abrasive materials.

Key Features:

Nozzle diameter: 0.8mm
Material: Hardened steel with copper core
Maximum temperature: up to 400°C

Specifications

Brand:	Modefine 3D	Our item no:	DAR02101
Filament diameter:	1.75 mm	Quantity:	1
Nozzle diameter:	0.8 mm

€10.95

€8.90 Excl. 23% VAT

EU warehouse

BIQU Panda Shelter with Ventilation Kit

Zoom in

Description The BIQU Panda Shelter with Ventilation Kit is a complete solution for Bambu Lab A1 and A1 Mini 3D printer users seeking optimal print quality and a safe working environment. This combination ensures a stable temperature during printing and effectively removes vapours and odours, resulting in consistent, high-quality prints.

Key Features:

Transparent, dust and water resistant housing
Active ventilation for constant temperature and air quality
Flame retardant material for extra safety

Specifications

Brand:	BIQU	Dimensions:	580 x 840 x 580 mm
Colour:	black	Our item no:	DAR02132

€99.50

€80.89 Excl. 23% VAT

EU warehouse

BIQU Panda Juicer SF-A Hotend High Flow & Standard Flow with 0.4mm hardened nozzle

Zoom in

Description The BIQU Panda Juicer SF-A Hotend is a high-quality, modular printhead that delivers top performance in both high-flow and standard-flow printing applications. With the included hardened 0.4mm nozzle, this hotend combines durability, high flow, and precision in a single, compact, plug-and-play solution. Ideal for users seeking maximum reliability and print quality.

Specifications

Brand:	BIQU	Max temp:	300 °C
Colour:	blue	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02692
Material:	Hardened Steel	Weight:	0.019 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€9.50

(coming soon)

€7.72 Excl. 23% VAT

BIQU Panda Juicer SF-H/A Hotend High Flow & Standard Flow with 0.4mm hardened nozzle

Zoom in

Description The BIQU Panda Juicer SF-H/A Hotend is a high-performance, modular print head designed for maximum performance in both high-flow and standard-flow applications. Featuring a hardened 0.4mm nozzle, this hotend offers excellent wear resistance, precise temperature control, and stable filament advance—ideal for those who want to combine speed and precision in a single solution.

Specifications

Brand:	BIQU	Max temp:	300 °C
Colour:	blue	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR02693
Material:	Hardened Steel	Weight:	0.019 kg

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€11.50

(coming soon)

€9.35 Excl. 23% VAT

BIQU Panda Breeze Cross Flow Fan for Bambu Lab A1 Printers Plug & Play

Zoom in

Description Enhance the cooling performance of your Bamboo Lab A1 with the BIQU Panda Breeze Cross Flow Fan. This plug-and-play upgrade provides a wide, even airflow across the entire print surface. The result: sharper details, tighter overhangs, and improved print quality at high print speeds.

Specifications

Brand:

BIQU

Our item no:

DAR02697

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€101.50

(coming soon)

€82.52 Excl. 23% VAT

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this tomorrow!

€76.50

€62.20 Excl. 23% VAT

In stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50

(coming soon)

€68.70 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Our item no:	DAR00265	Video promo:	Promotion video
Quantity:	4 Quantity

Order now, we can ship this tomorrow!

€17.00

€13.82 Excl. 23% VAT

In stock

123ink air pressure cleaner, 400ml

Zoom in

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:	123inkt	Volume:	400 ml
Our item no:	301186

Order now, we can ship this tomorrow!

€7.75

€6.30 Excl. 23% VAT

In stock

Creality 3D Air Purifier - FDM

Zoom in

Description The Creality Air Purifier ‑ FDM is a powerful air purifier specifically developed for FDM 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features:

360° air purification with an airflow of up to 250 m³/h
5-stage filter system with HEPA and activated carbon filters
Touchscreen with real-time PM2.5 display

Specifications

Brand:	Creality 3D	Our item no:	DAR02819
Power rating:	360 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€595.50

(coming soon)

€484.15 Excl. 23% VAT

Creality 3D Air Purifier - Resin

Zoom in

Description The Creality Air Purifier ‑ Resin is a powerful air purifier specifically developed for Resin 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features: