Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Customer reviews

Official Reviews.io

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Flashforge Creator 3

Flashforge Creator 3 Dual Extruder 3D Printer

Flashforge Creator 3 Dual Extruder 3D Printer DCP00044

Description The Flashforge Creator 3 is a 3D printer with two independent print heads. This allows you to print two objects at the same time, or print with two different materials such as PLA and PVA.

This printer comes with 2 coils of filament of any colour, an accessory and tool set and a USB stick. This printer supports temperatures up to 300°C for the hot end and 120°C for the heated bed. The print bed is flexible so that printed objects can be easily removed. In addition, you can automatically adjust the bed and the two print heads via the 4.5 inch touchscreen. The independent dual extruder and closed housing make this printer extremely suitable for printing complex 3D prints with high-quality filaments.

With the built-in camera you can monitor the printer and the progress of the prints in real-time. When you are connected to Wi-Fi or your Ethernet network, this can be monitored from anywhere. In addition, the printer is equipped with an air filter, filament detection sensors and 8 GB of internal storage. The printer comes standard with Flashforge's FlashPrint software, but the printer is also compatible with other well-known slicing software.

This new version of the Creator 3 features:

Extruder upgrade
- Extra ventilation channels
- Optimised nozzle structure and sensor
- Heat sink
Flexible building board with magnet
2 additional fans at the rear panel
Improved filament spool holder

This printer comes with 2 coils of filament of any colour, an accessory and tool set and a USB stick.

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	61.5 x 48.5 x 62.7 cm	Heatbed max temp:	120 °C
Input voltage:	100-240V	Max print depth:	30 cm
Nozzle diameter:	0.4 mm	Max print height:	20 cm
Power rating:	500 W	Max print volume:	15
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DCP00044
Has CNC option:	no	Weight:	40 kg
Filament sensor:	no

Order filament

Flashforge Creator 3/Guider 2s Carbon Filter Cotton

€4.25

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

Extra Information

3D Filament
Print bed accessories
Cleaning items
Promotional video

€1,873.00 (coming soon)

€1,522.76 Excl. 23% VAT

Flashforge Creator 3 complete build plate

Flashforge Creator 3 complete build plate DRO00085

Description The Flashforge Creator 3 flexible spring sheet is a steel building platform. Because the print bed is bendable, you can easily remove your prints. The spring sheet is suitable for the Flashforge Creator 3.

Specifications

Brand:

Flashforge

Our item no:

DRO00085

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 nozzle, 0.4mm v2

Flashforge Creator 3 nozzle, 0.4mm v2 DAR00102

Flashforge Creator 3 Nozzle 0.4mm The Flashforge Creator 3 nozzle has been specially developed for the 3D printer of the same name and is made of stainless steel with a diameter of 0.4mm.

Ideal as a replacement nozzle or as a spare part so that you have your own nozzle for every type of filament. When replacing the nozzle, make sure that you mount it well against the heatbreak so that no space is created here. This can cause a build-up of filament and a leakage.

Specifications

Brand:	Flashforge	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00102
Material:	Stainless steel	Screwthread type:	M6
Nozzle coating:	none

€16.25

€13.21 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 nozzle & gear kit

Flashforge Creator 3 nozzle & gear kit DAR00356

Description This 11-piece nozzle and gear set is the perfect addition to your Flashforge Creator 3 3D printer.
The set consists of:

2 x hardened stainless steel nozzles 0.4mm
2 x hardened stainless steel nozzles 0.6mm
2 x steel nozzles 0.4mm
2 x steel nozzles 0.8mm
2 x hardened steel filament feeding gear
1 x tool

When using a hardened steel nozzle, it is necessary to set the temperature of the extruder 5-15°C higher than with a normal nozzle. The maximum temperature of a steel nozzle is 300°C. For a hardened steel nozzle this is 320°C.

Specifications

Brand:

Flashforge

Our item no:

DAR00356

€179.50

€145.93 Excl. 23% VAT

EU warehouse

Network cable Cat5e U/UTP black, 500mm

Network cable Cat5e U/UTP black, 500mm DDK00125

Description This Cat5e UTP network cable is equipped with an RJ45 connector on both ends. This cable can be used to provide compatible devices with a network, this means they can be controlled remotely if needed. Useful!

This cable is 50cm long.

Specifications

AWG:	24/7 awg	Dimensions:	0.5 m
Brand:	123-3D	Material:	PVC
Colour:	black	Our item no:	DDK00125
Conductor strand type:	CCA

Dimensions:

€2.25

€1.83 Excl. 23% VAT

In stock

FlashForge Creator 3 Anti-Oozing Plate Links

FlashForge Creator 3 Anti-Oozing Plate Links DAR00625

Description The Flashforge Creator 3 Anti-Oozing Plate is an essential replacement part for the Flashforge Creator 3 3D printer. This plate helps prevent filament leakage during non-printing movements, resulting in cleaner prints with less unwanted filament residue. It's a simple yet effective upgrade that improves overall print quality.

Key features:

Compatibility: Specifically designed for the Flashforge Creator 3.
Function: Prevents oozing and stringing by capturing excess filament during idle print strokes.
Material: Made of heat resistant and durable material for long lasting use.

Specifications

Brand:

Flashforge

Our item no:

DAR00625

€6.95

€5.65 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 Y-axis driven shaft assembly

Flashforge Creator 3 Y-axis driven shaft assembly DRO00091

Description The Flashforge Creator 3 (Pro) Y-Axis Driven Shaft Assembly is an essential replacement part for the Flashforge Creator 3 and Creator 3 Pro 3D printers. This shaft drives the Y-axis and is crucial for accurate and reliable movement during the print process. It's important to replace this part when it becomes worn or damaged to maintain print quality.

Key features:

Compatibility: Compatible with Flashforge Creator 3 and Creator 3 Pro models.
Function: Responsible for driving the Y-axis, which ensures precise positioning of the print bed.
Installation: Easy to install with standard tools.

Specifications

Brand:

Flashforge

Our item no:

DRO00091

€7.95

€6.46 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 X-axis driven shaft assembly

Flashforge Creator 3 X-axis driven shaft assembly DRO00092

Description The Flashforge Creator 3 (Pro) X axis driven shaft assembly is an essential replacement part for the Flashforge Creator 3 and Creator 3 Pro 3D printers. This shaft drives the X axis and is crucial for precise and reliable movement during the print process. It is important to replace this part when it becomes worn or damaged to maintain print quality.

Key features:

Compatibility: Compatible with Flashforge Creator 3 and Creator 3 Pro models.
Function: Responsible for driving the X-axis, which ensures precise positioning of the print head.
Installation: Easy to install with standard tools.

Specifications

Brand:

Flashforge

Our item no:

DRO00092

€8.50

€6.91 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 Z-axis motor assembly

Flashforge Creator 3 Z-axis motor assembly DRO00093

Description The Flashforge Creator 3 Z-axis motor assembly is an essential replacement part for the Flashforge Creator 3 (Pro) 3D printer. This motor provides the vertical movement of the print platform, which is crucial for accurate and reliable prints. Replacing a worn or defective Z-axis motor can significantly improve print quality and prevent mechanical problems.

Key features:

Compatibility: Specifically designed for the Flashforge Creator 3 (Pro).
Function: Responsible for driving the Z-axis, which ensures precise positioning of the print bed.
Material: Made of durable metal for long lasting use.

Specifications

Brand:

Flashforge

Our item no:

DRO00093

€42.50

€34.55 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 Heat Block

Flashforge Creator 3 Heat Block DRO00097

Description This heat block from Flashforge contains a heating cartridge. Use this item in your Creator 3 printer.

Specifications

Brand:	Flashforge	Our item no:	DRO00097
Material:	Aluminum	Voltage:	24 v

€17.50

€14.23 Excl. 23% VAT

In stock

Flashforge Creator 3 PTFE tube connector

Flashforge Creator 3 PTFE tube connector DRO00098

Description The PTFE tube connector for the Flashforge Creator 3 is an essential replacement part that securely connects the PTFE tube to the printer's hot end or extruder. This connector ensures reliable filament routing, which is crucial for consistent print results.

Specifications

Brand:

Flashforge

Our item no:

DRO00098

€6.95

€5.65 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 brush

Flashforge Creator 3 brush DRO00113

Description A replacement nozzle brush for the Flashforge Creator 3.

Specifications

Brand:

Flashforge

Our item no:

DRO00113

€5.95

€4.84 Excl. 23% VAT

EU warehouse

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

€76.50

€62.20 Excl. 23% VAT

In stock

3D Printer starter/finishing/maintenance kit

3D Printer starter/finishing/maintenance kit DGS00122

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50 (coming soon)

€68.70 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Steelmans 3dB noise reduction feet pads DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Brand:	Steelmans3D	Quantity:	4 Quantity
Our item no:	DAR00265	Video promo:	Promotion video

€17.00

€13.82 Excl. 23% VAT

In stock

Calex Smart WiFi smoke detector

Calex Smart WiFi smoke detector LCA00437

Description This smart smoke detector from Calex ensures that you are informed of smoke in your home wherever you are. The powerful 85dB alarm tone warns you when you are at home. Are you gone out? Then you will receive a notification on your Calex app.

The smoke detector is completely wireless and can therefore be placed anywhere. The sensor works on batteries and lasts about 10 years. If the batteries are almost empty, the smoke alarm will let you know in good time. Connection is via 2.4GHz Wi-Fi. In addition, the sensor can be used with Google Assistant and Amazon Alexa.

With the Calex smart app, the smoke detector can also be programmed, and other smart devices can be set to respond when the smoke detector goes off. For example, you can turn off your 3D printer if it is connected to a smart plug.

Download the Calex Smart app
To use the product optimally, install the free Calex Smart app on your phone or tablet (suitable for Apple or Android). Don't want to use the app for a while? You can also operate the smoke detector with the Calex remote control.

Works with: Tuya, Google* and Alexa*
*Voice Assistant is required to use Google or Alexa.

Specifications

Brand:	Calex	Our item no:	LCA00437
Colour:	white	Weight:	0.23 kg
Diameter:	110 mm	WiFi:	2.4 GHz
Dimensions:	57.15 mm

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Calex Smart mini indoor camera (1080p)

Calex Smart mini indoor camera (1080p) LCA00572

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Brand:	Calex	Our item no:	LCA00572
Colour:	white	WiFi:	2.4 GHz
Dimensions:	110 x 53 x 32 mm

€41.50

€33.74 Excl. 23% VAT

EU warehouse

123ink air pressure cleaner, 400ml

123ink air pressure cleaner, 400ml 301186

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:	123inkt	Volume:	400 ml
Our item no:	301186

€7.75

€6.30 Excl. 23% VAT

In stock

WOOX smart PTZ camera

WOOX smart PTZ camera LWO00047

3
2
1
0

Description Use this smart PTZ camera from WOOX to keep an eye on your home at any time and wherever you are. You can connect the camera to an app on your phone or tablet, which will send you notifications if something is wrong. This way you always know what is happening at home or in your business premises.

The camera makes super-sharp video images (1080p) that can be viewed at any time. Because the head of the camera can also move, you have a 360° overview of a room and you can really see everything. For the best view, the PTZ camera can even be controlled and rotated live at all times. Or zoom in to see something better.

The package contains the indoor PTZ camera, a USB cable, a mounting bracket, an adapter, screws and stickers and a user manual.

Woox smart HD indoor camera video:
Video

*A Voice Assistant is required to use Google or Alexa.

Specifications

Brand:	Woox	Our item no:	LWO00047
Colour:	white	Voltage:	220 v
Height:	107 mm	WiFi:	2.4 GHz

Please note: The delivery time for this item is currently unknown.

€35.50

€28.86 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

© 2026 - 123-3d.ie