Flashforge Creator 3 Pro

Description Introducing the new Flashforge Creator 3 Pro: the second generation with additional optimisations! This allows you to print even more effectively and professionally.

The most important upgrades

Optimised extruder for better results with technical filaments.
Upgraded movement system for a more accurate printing result.
Refined levelling sensors for more accurate print positions.
Improved print bed that is flexible and heats up at lightning speed.

Dual extruders
The Flashforge Creator 3 Pro has two independent print heads. This allows you to simultaneously print two different objects or with two different materials, such as PLA and PVA . The wind speed of the dual fans on the renewed extruders can be controlled, so that prints with technical filament get a better quality. The nozzle and heating element are integrated and work perfectly together. The improved sensors also ensure a more accurate print position.

The maximum temperature of the extruders has been increased to 320°C. The printer comes with a standard 0.4mm nozzle, but you can swap it with a 0.6 or 0.8mm nozzle.

Heated bed
The renewed heated bed heats up to 110° C in just 3 minutes! The maximum temperature is 120° C. The flexible print bed makes it easy to remove printed objects. The bed also has a built-in magnet, so you can easily attach it to and remove it from the platform. You can adjust the bed and the two print heads automatically via the 4.3 inch touchscreen.

Other specifications
You can connect the printer via USB, Wi-Fi or Ethernet. With the built-in camera you can monitor the progress of the prints in real-time. Is the printer connected to Wi-Fi or Ethernet? Then you can even monitor this from anywhere. The printer has sensors that detect the filament and give a warning when the filament has run out. In addition, it also includes a HEPA13 air filter and 8 GB of internal storage. Flashforge's FlashPrint software is included as standard, but you can also use other well-known slicing software.

Specifications

Brand:	Flashforge	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	work ethernet WiFi	Printer has USB:	yes
Dimensions:	61.5 x 48.5 x 62.7 cm	Heatbed max temp:	120 °C
Input voltage:	100-240V	Max print depth:	30 cm
Nozzle temp range:	0 - 300 °C	Max print height:	20 cm
Power rating:	650 W	Max print volume:	15
Printer bed levelling:	automatic	Max print width:	25 cm
Printer extruder:	direct	No of extruders:	2
Extruder max temp:	300 °C	Printing technique:	TFDM FFF
3D print option:	yes	Printer voltage:	24 v/°c
Camera included:	yes	Our item no:	DCP00220
Has CNC option:	no	Weight:	40 kg
Filament sensor:	no

€2,173.00 (coming soon)

€1,766.67 Excl. 23% VAT

Flashforge Creator 3 Pro hardened steel left hotend, 0.4mm nozzle

Zoom in

Description This hardened steel left hotend with 0.4mm nozzle is an original replacement part from Flashforge. The part is delivered fully assembled. This hotend is suitable for the Flashforge Creator 3 Pro 3D printer.

Specifications

Brand:	Flashforge	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01240
Material:	Steel

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

Flashforge Creator 3 Pro hardened steel right hotend, 0.4mm nozzle

Zoom in

Description This hardened steel right hotend with 0.4mm nozzle is an original replacement part from Flashforge. The part is delivered fully assembled. This hotend is suitable for the Flashforge Creator 3 Pro 3D printer.

Specifications

Brand:	Flashforge	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01241
Material:	Steel

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

Flashforge Creator 3 Pro levelling sensor

Zoom in

Description This Flashforge levelling sensor for the Creator 3 Pro is an original replacement part from Flashforge. The sensor helps you level your print bed, so you can make perfect prints.

Specifications

Brand:

Flashforge

Our item no:

DAR01453

€28.50

€23.17 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 Y-axis driven shaft assembly

Zoom in

Description The Flashforge Creator 3 (Pro) Y-Axis Driven Shaft Assembly is an essential replacement part for the Flashforge Creator 3 and Creator 3 Pro 3D printers. This shaft drives the Y-axis and is crucial for accurate and reliable movement during the print process. It's important to replace this part when it becomes worn or damaged to maintain print quality.

Key features:

Compatibility: Compatible with Flashforge Creator 3 and Creator 3 Pro models.
Function: Responsible for driving the Y-axis, which ensures precise positioning of the print bed.
Installation: Easy to install with standard tools.

Specifications

Brand:

Flashforge

Our item no:

DRO00091

€7.95

€6.46 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 X-axis driven shaft assembly

Zoom in

Description The Flashforge Creator 3 (Pro) X axis driven shaft assembly is an essential replacement part for the Flashforge Creator 3 and Creator 3 Pro 3D printers. This shaft drives the X axis and is crucial for precise and reliable movement during the print process. It is important to replace this part when it becomes worn or damaged to maintain print quality.

Key features:

Compatibility: Compatible with Flashforge Creator 3 and Creator 3 Pro models.
Function: Responsible for driving the X-axis, which ensures precise positioning of the print head.
Installation: Easy to install with standard tools.

Specifications

Brand:

Flashforge

Our item no:

DRO00092

€8.50

€6.91 Excl. 23% VAT

EU warehouse

Flashforge Creator 3 Z-axis motor assembly

Zoom in

Description The Flashforge Creator 3 Z-axis motor assembly is an essential replacement part for the Flashforge Creator 3 (Pro) 3D printer. This motor provides the vertical movement of the print platform, which is crucial for accurate and reliable prints. Replacing a worn or defective Z-axis motor can significantly improve print quality and prevent mechanical problems.

Key features:

Compatibility: Specifically designed for the Flashforge Creator 3 (Pro).
Function: Responsible for driving the Z-axis, which ensures precise positioning of the print bed.
Material: Made of durable metal for long lasting use.

Specifications

Brand:

Flashforge

Our item no:

DRO00093

€42.50

€34.55 Excl. 23% VAT

EU warehouse

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

€76.50

€62.20 Excl. 23% VAT

In stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50 (coming soon)

€68.70 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Brand:	Steelmans3D	Quantity:	4 Quantity
Our item no:	DAR00265	Video promo:	Promotion video

€17.00

€13.82 Excl. 23% VAT

In stock

Calex Smart WiFi smoke detector

Zoom in

Description This smart smoke detector from Calex ensures that you are informed of smoke in your home wherever you are. The powerful 85dB alarm tone warns you when you are at home. Are you gone out? Then you will receive a notification on your Calex app.

The smoke detector is completely wireless and can therefore be placed anywhere. The sensor works on batteries and lasts about 10 years. If the batteries are almost empty, the smoke alarm will let you know in good time. Connection is via 2.4GHz Wi-Fi. In addition, the sensor can be used with Google Assistant and Amazon Alexa.

With the Calex smart app, the smoke detector can also be programmed, and other smart devices can be set to respond when the smoke detector goes off. For example, you can turn off your 3D printer if it is connected to a smart plug.

Download the Calex Smart app
To use the product optimally, install the free Calex Smart app on your phone or tablet (suitable for Apple or Android). Don't want to use the app for a while? You can also operate the smoke detector with the Calex remote control.

Works with: Tuya, Google* and Alexa*
*Voice Assistant is required to use Google or Alexa.

Specifications

Brand:	Calex	Our item no:	LCA00437
Colour:	white	Weight:	0.23 kg
Diameter:	110 mm	WiFi:	2.4 GHz
Dimensions:	57.15 mm

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

Calex Smart mini indoor camera (1080p)

Zoom in

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Brand:	Calex	Our item no:	LCA00572
Colour:	white	WiFi:	2.4 GHz
Dimensions:	110 x 53 x 32 mm

€41.50

€33.74 Excl. 23% VAT

EU warehouse

123ink air pressure cleaner, 400ml

Zoom in

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:	123inkt	Volume:	400 ml
Our item no:	301186

€7.75

€6.30 Excl. 23% VAT

In stock

WOOX smart PTZ camera

Zoom in

Description Use this smart PTZ camera from WOOX to keep an eye on your home at any time and wherever you are. You can connect the camera to an app on your phone or tablet, which will send you notifications if something is wrong. This way you always know what is happening at home or in your business premises.

The camera makes super-sharp video images (1080p) that can be viewed at any time. Because the head of the camera can also move, you have a 360° overview of a room and you can really see everything. For the best view, the PTZ camera can even be controlled and rotated live at all times. Or zoom in to see something better.

The package contains the indoor PTZ camera, a USB cable, a mounting bracket, an adapter, screws and stickers and a user manual.

Woox smart HD indoor camera video:
Video

*A Voice Assistant is required to use Google or Alexa.

Specifications