Geeetech Prusa i3 Pro B

GEEETECH A10 Series, A20 Series, A30 Series endstop module for hot end for A10T, A30T, A20T, A20, A30Pro printers

Description This is a replacement A10 Series, A20 Series, A30 Series endstop module for hot end. It is suitable for A10T, A30T, A20T, A20, A30Pro printers with a V4.1B mainboard.

Specifications

Brand:

Geeetech

Our item no:

DAR00667

Order now, we can ship this today!

€2.75

€2.24 Excl. 23% VAT

In stock

GEEETECH thermistor with cable for Prusa i3 Pro B 3D Printer, 70cm

Zoom in

Description Original Geeetech hotend thermistor to replace a defective thermistor on the i3 Pro B printer. The cable length is 70cm and is equipped with a 2 pin connector.

Specifications

Brand:	Geeetech	Our item no:	DAR00685
Cable length:	70 cm

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this today!

€76.50

€62.20 Excl. 23% VAT

In stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50

(coming soon)

€68.70 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Our item no:	DAR00265	Video promo:	Promotion video
Quantity:	4 Quantity

Order now, we can ship this today!

€17.00

€13.82 Excl. 23% VAT

In stock

123ink air pressure cleaner, 400ml

Zoom in

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:	123inkt	Volume:	400 ml
Our item no:	301186

Order now, we can ship this today!

€7.75

€6.30 Excl. 23% VAT

In stock

Creality 3D Air Purifier - FDM

Zoom in

Description The Creality Air Purifier ‑ FDM is a powerful air purifier specifically developed for FDM 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features:

360° air purification with an airflow of up to 250 m³/h
5-stage filter system with HEPA and activated carbon filters
Touchscreen with real-time PM2.5 display

Specifications

Brand:	Creality 3D	Our item no:	DAR02819
Power rating:	360 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€595.50

(coming soon)

€484.15 Excl. 23% VAT

Creality 3D Air Purifier - Resin

Zoom in

Description The Creality Air Purifier ‑ Resin is a powerful air purifier specifically developed for Resin 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features: