Creality 3D CR-10 Max

Compatible with the following printers:

Creality CR-10-S5

Creality CR-10-S4

Creality CR-10S

TronXY X5S

Creality CR-10 MINI

MK7, MK8, MK9 Hotends

Description The Creality 3D CR-10 Max 3D printer comes with an included stabilisation kit, also called the golden triangle, which ensures unprecedented stability in the printer.
By using a double Z-axis, the X-sled is better supported and this results in better prints.

The print surface of the printer is 450mm x 450mm x 470mm, making this one of the largest in its category. Unlike its predecessors, the heated bed of the Creality 3D CR-10 Max uses its full size for heating. The heated bed has its own power supply so it can be heated very quickly.

After a correct calibration of the BLTouch sensor, you no longer have to worry about a poorly adjusted heatbed. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

Because the printer has such a large bed, the double belt drive ensures that the bed is effortlessly steered forwards and backwards.

The recovery function of the 3D printer comes in handy when the voltage drops. The CR-10 Max also has a filament detection sensor. Is the filament running out? Then the 3D printer will pause automatically. All cabling is quick and easy to connect with two multi connectors located on the electronics housing.

Instead of a standard Bowden tube, this printer also comes with the premium Capricorn Bowden tube, this Bowden tube ensures a better flow of the filament and is much more resistant to the high temperatures of the hotend.

In addition, an extruder is used that uses the same technique as a Bondtech extruder, the filament is fed effortlessly through the use of a double gear.

The printer can be used standalone by using the SD card slot. It is therefore not necessary to always connect the 3D printer to a PC, and with the material detection sensor, the printer will never continue printing without filament.

The printer comes with the following:

Scraper
Power cable
PLA test filament
USB cable
Additional nozzle (0.4 and 0.8)
Extra pneufit
Micro SD card + USB adapter
Set block for Z-axis
Mounting tools
Side cutting pliers
Tie wraps

Specifications

Brand:	Creality 3D	Heated bed included:	yes
Filament diameter:	1.75 mm	Has laser option:	no
Network:	no	Printer has USB:	yes
Dimensions:	73.5 x 65 x 78.5 cm	Heatbed max temp:	100 °C
Input voltage:	100-240V	Max print depth:	45 cm
Nozzle diameter:	0.4 mm	Max print height:	47 cm
Nozzle type:	M6T75	Max print volume:	95.175
Power rating:	750 W	Max print width:	45 cm
Printer bed levelling:	automatic	No of extruders:	1
Printer extruder:	bowden	Printing technique:	TFDM FFF
Extruder max temp:	250 °C	Printer voltage:	24 v/°c
3D print option:	yes	Our item no:	DKI00023
Camera included:	no	Video instructions:	Instructional video
Has CNC option:	no	Weight:	20 kg
Filament sensor:	yes

Extra Information

Creality 3D CR-10 Max Filament
Print bed accessories
Cleaning items
Instructional video

€757.00

(coming soon)

€615.45 Excl. 23% VAT

Micro Swiss all metal Hotend Kit for Creality CR-10S PRO | CR-10 Max

Zoom in

Description

This all-metal hot-end set from Micro Swiss for the Creality CR-10S Pro is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and thus ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost 3x lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heat break
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
silicone sock
Fasteners

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
		Creality CR-10S Pro
		Creality CR 10 Max

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00022

€67.00

€54.47 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.20mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.2mm.

Compatible with the following printers:

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DMS00117
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	twinclad XT

Nozzle diameter:

0.2 mm

0.3 mm

0.4 mm

Order now, we can ship this today!

€19.50

€15.85 Excl. 23% VAT

In stock

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.30mm

Zoom in

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Our item no:	DMS00118
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	twinclad XT

Nozzle diameter:

0.2 mm

0.3 mm

0.4 mm

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6 x .75mm, 1.75mm x 0.40mm

Zoom in

CR-10S Pro (Original hotend)
CR-10S Pro V2 (Original hotend)
CR-10 Max (Original hotend)

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00089
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	twinclad XT

Nozzle diameter:

0.2 mm

0.3 mm

0.4 mm

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Creality M6x.75 brass nozzle, 0.20mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.2mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR00295
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Creality M6x.75 brass nozzle, 0.30mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.3mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Our item no:	DAR00296
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Creality M6x.75 brass nozzle, 0.40mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.4mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00297
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this today!

€7.00

€5.69 Excl. 23% VAT

In stock

Creality M6x.75 brass nozzle, 0.50mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.5mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DAR00298
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Creality M6x.75 brass nozzle, 0.60mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.6mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR00299
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this today!

€7.00

€5.69 Excl. 23% VAT

In stock

Creality M6x.75 brass nozzle, 0.80mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 x.75 thread and has an opening of 0.8mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hot end)
		CR-10S Pro V2 (Original hot end)
		CR-10 Max (Original hot end)

Specifications

Brand:	123-3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00300
Material:	Brass	Screwthread type:	M6X75
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this today!

€7.00

€5.69 Excl. 23% VAT

In stock

Micro Swiss Heater Block with silicone sock for CR-10 Printers

Zoom in

Description The Micro Swiss Heater Block with silicone sock is an upgrade for various Creality printers, among others.

Aluminium Heater Block
Silicone Sock
Allen key

Specifications

Brand:	Micro Swiss	Our item no:	DMS00101
Material:	Aluminum

Order now, we can ship this today!

€14.00

€11.38 Excl. 23% VAT

In stock

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack)

Zoom in

Description With these silicone socks you ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, is more favorable for overhangs, bridges and ensures more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block. One sock lasts at least 100 printing hours.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality Ender-2	MakerBot Replicator z18
	Creality Ender-3	CraftBot 2
	Creality Ender-3 Pro	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Anet A6	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Prusa i3 MK2	anycubic
	Prusa i3 MK2S	Printers with a E3D V4 / V5 / V6 1.75 mm Hotend
	Prusa i3 MK3

Specifications

Brand:	Micro Swiss	Our item no:	DMS00102
Material:	Silicone	Quantity:	3

Order now, we can ship this today!

€12.50

€10.16 Excl. 23% VAT

In stock

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	300 mm
Diameter:	53 mm	Our item no:	DVB00005
Download SDS:	Download	Volume:	400ml

Variant:

Nylon (30 ml)

Plus (100 ml)

Stick (80 ml)

Order now, we can ship this today!

€12.75

€10.37 Excl. 23% VAT

In stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Variant:	Plus (100 ml)
Download SDS:	Download	Volume:	100ml
Height:	150 mm

Variant:

Nylon (30 ml)

Plus (100 ml)

Stick (80 ml)

Order now, we can ship this today!

€7.75

€6.30 Excl. 23% VAT

In stock

Creality 3D Sonic Pad

Zoom in

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Brand:	Creality 3D	Our item no:	DAR00885
Colour:	black	Voltage:	12 v
Standard WiFi connection:	802.11 b/g/n	Weight:	0.46 kg
Dimensions:	40 x 222 x 128 mm

€159.50

€129.67 Excl. 23% VAT

€180.00 Creality3D rrp

EU warehouse

Heated bed spring, 25mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs of your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be leveled less often.

Specifications

Brand:	123-3D	Length:	25 mm
Colour:	orange	Outer diameter:	8 mm
Inner diameter:	5 mm	Our item no:	DME00139

Order now, we can ship this today!

€5.75

€4.67 Excl. 23% VAT

In stock

Heated bed spring, 30mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs for your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be leveled less often.

Specifications

Brand:	123-3D	Length:	30 mm
Colour:	orange	Outer diameter:	8 mm
Inner diameter:	5 mm	Our item no:	DME00298

Order now, we can ship this today!

€5.75

€4.67 Excl. 23% VAT

In stock

USB A to mini USB black USB 2.0 cable, 1m

Zoom in

Description This USB cable has a length of 100cm and is suitable for connecting various electronics to a computer.

Specifications

Brand:	Valueline	Connector B:	Micro USB B HDMI male
Cable length:	100 cm	Insulation material:	PVC
Colour:	black	Our item no:	DDK00122
Connector A:	USB A 2 male

Cable length:

100 cm

300 cm

Order now, we can ship this today!

€3.75

€3.05 Excl. 23% VAT

In stock

Bondtech DDX V3 PH1 for Creality CR-10 (S) Pro & Max

Zoom in

Description Bondtech's DDX V3 PH1 replaces the original Bowden extruder with a direct drive extruder setup. The model is suitable for Creality 3D printers and is compatible with hot ends of almost every Creality model. You can also upgrade the hotend to Copperhead or Mosquito.

With this powerful 1.75mm Dual Drive extruder you achieve a higher print quality and you have more options, such as thinner layers, higher resolution prints with small nozzles, high flow prints with larger nozzles and a wider choice of materials.

Further highlights:

Effective hot end cooling
3:1 gear ratio
Housing parts made of polyamide (PA12) with SLS technology for maximum strength and precision

Please Note: A Bondtech DDX Adapter Kit is required to use this product.

Specifications

Brand:	Bondtech	Our item no:	DBO00050
Filament diameter:	1.75 mm

€147.50

€119.92 Excl. 23% VAT

EU warehouse

Direct Drive Extruder plate for E3D Hemera Extruder (123-3D brand)

Zoom in

Description The black Direct Drive Extruder plate for E3D Hemera Extruder from 123-3D is made of anodized aluminum. It is easy to assemble on your Creality 3D printer.

This pack contains:

1 Extruder plate
1 Allen key
2 tie wraps
Set screws

Specifications

Brand:	123-3D	Our item no:	DAR00790
Colour:	black

€11.50

€9.35 Excl. 23% VAT

EU warehouse

Creality 3D Pad 5" HD touchscreen

Zoom in

Description The Creality 3D pad allows you to visualise and track the progress of your 3D print. With a better view of the print model, you prevent errors earlier and the printing process becomes more intuitive. The 5 inch HD screen has 854 x 480 ppi and has a very high sensitivity. The touchscreen is suitable for all FDM 3D printers with Marlin firmware. Thanks to the Plug and Print principle, you can easily connect the Creality 3D pad to your 3D printer.

Properties:

Print effects: create texture with one click, e.g. with 3D prints of animals
Power Loss Resume: Keeping the Design
Filament Run-out Detection: no more blank prints
11+ languages available

The Creality Pad 5" is compatible with the following printers:
CR-10S, CR-10S Pro, CR-5 Pro, CR-5 Pro H, CP-01, Ender-3 Max, Ender-3, Ender-3 Pro, Ender-3 S1, Ender-3 V2, Ender-5 Pro, Ender-5 Plus, Ender-7, CR-10 V3, CR-10 V2, CR-10 Max, CR-6 SE, CR-6 Max, CR-30, CR-X Pro and the CR-200B.

Specifications

Brand:	Creality 3D	Our item no:	DAR00818
Colour:	black	Weight:	0.295 kg
Dimensions:	13.5 x 133.5 x 76.2 mm

Order now, we can ship this today!

€67.50

€54.88 Excl. 23% VAT

In stock

Creality 3D Creality Wifi Box 2.0 (With MicroSD Card)

Zoom in

Description Increase your 3D printing fun with the Creality WiFi box 2.0 from Creality 3D. By connecting to this you can control your 3D printer remotely in real time and monitor the status of your print via the Creality Cloud app. The box can be configured quickly and easily via Bluetooth. Finally, the printing history of the WiFi box can be uploaded to the cloud with just one click.

Specifications

Bluetooth:	-	Dimensions:	20 x 90 x 64 mm
Brand:	Creality 3D	Material:	ABS
Colour:	black	Our item no:	DAR01274
Current consumption:	2.4 A	USB version:	USB 2.0
Manual:	Download	Voltage:	5 v
Network:	work ethernet WiFi

Order now, we can ship this today!

€43.50

€35.37 Excl. 23% VAT

In stock

Creality 3D Upgraded red metal extruder clip for CR-10 Max

Zoom in

Description New version of the extruder clip/bracket for the CR-10 Max / CR-10S Pro 3D Printer.

Specifications

Brand:	Creality 3D	Our item no:	DRO00063
Colour:	red

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this today!

€76.50

€62.20 Excl. 23% VAT

In stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50

(coming soon)

€68.70 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Our item no:	DAR00265	Video promo:	Promotion video
Quantity:	4 Quantity

Order now, we can ship this today!

€17.00

€13.82 Excl. 23% VAT

In stock

123ink air pressure cleaner, 400ml

Zoom in

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:	123inkt	Volume:	400 ml
Our item no:	301186

Order now, we can ship this today!

€7.75

€6.30 Excl. 23% VAT

In stock

Creality 3D Air Purifier - FDM

Zoom in

Description The Creality Air Purifier ‑ FDM is a powerful air purifier specifically developed for FDM 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features:

360° air purification with an airflow of up to 250 m³/h
5-stage filter system with HEPA and activated carbon filters
Touchscreen with real-time PM2.5 display

Specifications

Brand:	Creality 3D	Our item no:	DAR02819
Power rating:	360 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€595.50

(coming soon)

€484.15 Excl. 23% VAT

Creality 3D Air Purifier - Resin

Zoom in

Description The Creality Air Purifier ‑ Resin is a powerful air purifier specifically developed for Resin 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features: