Electrical tools

• Knife tip: for cutting support material
• Large blade point: for cutting support material
• Needle point: for clearing small holes
• Standard tip: for general use
• Spoon tip: for removing wires and smoothing surfaces
• Large spoon tip: for removing wires and smoothing surfaces
• Detail point: for updating detail work
• Ironing point: for leveling surfaces
• Countersink Point: For countersinking holes
• Insertion point: for inserting metal parts

• Knife tip: for cutting support material
• Needle point: for clearing small holes
• Spoon tip: for removing wires and smoothing surfaces
• Standard tip: for general use

• 1x Drill: 10000rmp - 32000rpm / with on/off switch
• 1x Flexible arm
• 1x Tensioner
• 4x Collets
• 10x Diamond Points
• 5x Glass fiber reinforced cutting discs
• 62x Cutting discs
• 1x Polishing wheel (rubber)
• 2x Sanding drums
• 22x sanding belts
• 1x Folding Discs
• 12x Polishing stones
• 9x Wire brushes
• 7x Felt polishing heads and discs
• 1x Silicon carbide sharpening stone
• 10x Grinding Discs
• 4x Mandrels
• 2x Polishing paste
• 6x Drills (2mm x 1.5mm, 2mm x 2.3mm, 2mm x 3.1mm)
• 1x Key

• 1x Electric drill: 10000RMP -32000rpm - with on/off switch - soft grip - high-quality bearing
• 1x Flexible arm
• 4x Collets (2mm x 3.2mm, 1mm x 2.4mm, 1mm x 1.6mm)
• 8x Sanding belts (12.7mm x 12.7mm)
• 8x Sanding belts (6.3mm x 12.7mm)
• 10x Grinding discs with pin (Ø 3.2mm)
• 2x Mandrel for cutting discs (Ø 3.2mm)
• 1x Mandrel for felt discs (Ø 3.2mm)
• 2x Sanding pins (6.3mm x 12.7mm, 12.7mm x 12.7mm)
• 10x Grinding discs (20mm x 3.2mm)
• 1x Marker
• 5x Glass fibre reinforced cutting discs (32mm x 1.2mm)
• 1x Rubber grinding wheel (22mm x 3.2mm)
• 1x Spanner Wrench
• 1x Polishing paste
• 30x Reinforced cutting discs (24mm x 0.8mm)
• 36x Cutting discs (24mm x 0.6mm)
• 40x Sandpaper
• 3x Felt Discs (25.4mm X 6.3mm)
• 4x Felt discs (12.7mm x 6.3mm)
• 1x Pointed felt wheel (9.5mm x 19mm)
• 1x Flap disc (Ø 3.2mm)
• 2x HSS drill chuck (Ø 3.2mm)
• 6x Diamond discs (Ø 3.2mm)
• 6x Drill Bits (2mm x 1.6mm, 2mm x 2.3 mm, 2mm x 3.2mm)
• 6x Brushes (Ø 3.2mm)
• 1x Woolen polishing wheel (Ø 3.2mm)

• 1x Drill: 10,000rpm - 32,000rpm / with on/off switch
• 10x Grinding wheel
• 2x Diamond Point
• 3x Mandrel
• 8x Cutting disc
• 4x Polishing Wheel
• 4x sanding belt
• 2x Drill (3mm and 2.3mm)
• 2x Collet (3.2mm and 2.35mm)
• 1x marker
• 3x Sandpaper
• 1x Spanner Wrench

Easily carry out minor repairs with this easy-to-use 30 Watt soldering iron set.

The set contains the following components:

• soldering iron of 30W
• desoldering pump
• soldering iron holder
• solder tin

1. Press the 'lock' button to lock it. This prevents the tool from suddenly turning during the replacement. After this you can loosen the nut.
2. Select the accessory you want to use and place it in the tool.
3. Retighten the nut and press the 'lock' button to use the tool again.

The Fanttik C8 Nano cordless electric scissors are compact and cordless electric scissors ideal for fabrics, leather, carpets and thin cardboard (not suitable for thick cardboard). Cuts materials up to 1/4 inch thick with a powerful magnetic motor reaching up to 230 RPM.

Features three speed settings, a fast 1-hour recharge with up to 40 minutes runtime, LED display for battery and speed status, built-in LED light for precision cutting, and EasySwap blade change system. Supplied with two blades.

Powerful and cordless, the Fanttik X8 APEX delivers up to 150 PSI with 2X faster inflation, making it ideal for cars, motorcycles, and e-bikes with tires up to 26.3 inches.

Featuring a clear LCD dual screen for easy pressure monitoring and precise control, this compact air compressor offers convenient, on-the-go inflation whenever you need it.

Compact, lightweight (498g) and portable, the Fanttik Slim V8 APEX is ideal for small cleaning tasks such as car interiors, desks and keyboards. Powered by an 80,000rpm brushless motor, it delivers up to 19,000Pa suction with two modes: Eco (up to 40 mins) and Max (up to 13 mins).

This 4-in-1 multifunctional device vacuums, blows, inflates and pumps, and includes 10 practical accessories for hard-to-reach areas, pet hair and stubborn dust.

Featuring Type-C fast charging (fully charged in 2.5 hours), one-touch dust emptying, and a HEPA filter capturing 95.99% of particles, it’s a convenient, cordless solution for everyday quick clean-ups.

Compact and versatile, the Fold S1 APEX electric screwdriver is designed for precision DIY tasks. Featuring an interactive LED display and 8 torque settings, it allows accurate torque adjustment with real-time monitoring for professional results.

The swivel handle offers four folding angles (0°/24°/48°/72°) for flexible use and reduced hand fatigue. With two speed modes (100 RPM and 250 RPM) and a maximum torque of 7Nm, it provides excellent control across different screws and materials.

Powered by a 2500mAh battery with convenient Type-C charging, this 1/4" hex cordless screwdriver delivers reliable performance for extended use.

Designed for delicate DIY and repair tasks, the Fanttik E1 MAX delivers precise torque with settings of 0.05 Nm (low), 0.2 Nm (high), and 3 Nm (manual), ideal for mobile phones, watches, cameras, electronic bracelets, and precision instruments (not for PC assembly).

Comes with 50 metal bits across 9 categories, made from S2 hardened steel for durability, all stored in a magnetic internal holder for neat organization. The magnetic chuck and bits allow easy attachment and use.

Powered by a rechargeable battery capable of driving up to 400 screws per full charge, with Type-C charging for convenience. Built-in 4 shadowless LED lights illuminate work areas, while front and rear buttons control screw-in and screw-out functions.