Buy 3D printers, filament, parts & tools | lowest prices

MK8 Hotend

Customer reviews

Payment options

Follow us on social media

Official dealer

Popular products

Bowden hotend kit for Creality 3D Printers

Description Give your Creality 3D printer an upgrade with this Bowden hotend kit!

The hot end kit consists of:

1 x Aluminium MK8 Bowden Extruder Upgrade kit red right
1 x Capricorn TL 1 Meter transparent PTFE tube 1.75mm
1 x Micro Swiss All Metal Hotend Kit for Creality CR-10 / Ender 3D Printers

The Bowden extruder is made of durable, red aluminium and suitable for filament with a diameter of 1.75mm. With the PTFE tube you can easily connect the whole to the metal Micro Swiss hotend kit, which consists of an aluminium cooling block, a titanium heatbreak, an aluminium heater block, a brass-coated nozzle of 0.4mm, a silicone sock and various mounting parts.

Suitable for the following 3D printers:

Creality CR-10
Creality CR-10 Mini
Creality CR-10S
Creality CR-10 S4
Creality CR-10 S5
Creality CR-20
Creality CR-20 Pro
Creality Ender-3
Creality Ender-3 Pro
Creality Ender-5
Creality Ender-5 Plus

Specifications

Brand:

123-3D

Our item no:

DAR00225

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€117.50 (coming soon)

€95.53 Excl. 23% VAT

Nozzle set (5-pack)

Zoom in

Description Do you want to print with a higher precision or do you have a large project ahead of you? Then this 5-piece nozzle set is the perfect addition to your 3D printer!

The set consists of:

1x Nozzle 0.2mm 123-3D
1x Nozzle 0.3mm 123-3D
1x Nozzle 0.5mm 123-3D
1x Nozzle 0.8mm 123-3D
1x Hotend cleaning brush (copper)

The nozzles are made of brass, with M6 screw thread and suitable for filament with a diameter of 1.75mm. With the copper cleaning brush you can easily clean the hotend with every nozzle or filament change. Always make sure your 3D printer is completely turned off!

Suitable for the following 3D printers:

Anet A6
Anet A8
MakerBoth 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao
Creality series

Specifications

Brand:	123-3D	Quantity:	5
Our item no:	DAR00224

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

123-3D kapton tape, 25mm x 33m

Zoom in

Description Kapton tape (polyimide tape) is an electrically insulating heat-resistant tape. This tape is ideal for covering the heated bed of the 3D printer to limit the warping of the ABS and other filament types as much as possible.

Specifications

Brand:	123-3D	Temp resistance:	Kapton
Length:	33 m	Thickness:	0.06 mm
Material:	Polyimide	Width:	25 mm
Our item no:	DVB00014

Width:

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€10.75

€8.74 Excl. 23% VAT

In stock

123-3D kapton tape, 8mm x 33m

Zoom in

Description Kapton tape (polyimide tape) is an electrically insulating heat-resistant tape. This tape is extremely suitable for covering the heated bed of the 3D printer to limit the warping of the ABS and other filament types as much as possible.

Specifications

Brand:	123-3D	Temp resistance:	Kapton
Length:	33 m	Thickness:	0.06 mm
Material:	Polyamide	Width:	8 mm
Our item no:	DVB00011

Width:

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€6.50

€5.28 Excl. 23% VAT

In stock

Baco adjustable spanner, 200mm

Zoom in

Description You can use this adjustable spanner to loosen and tighten your nozzle and prevent too much force from being exerted on the heatbreak of your hot end. The key has a length of 20cm and is equipped with an ergonomic handle.

Specifications

Brand:	123-3D	Our item no:	DGS00060
Dimensions:	20 cm

Order now, we can ship this today!

€8.25

€6.71 Excl. 23% VAT

In stock

Capricorn XS heat break liner, 2mm x 3mm (300mm)

Zoom in

Description The Capricorn XS heat break liner is specially made to fit perfectly in the heatbreak. The liner is also 30cm long so you can provide for 10 heat breaks.

Specifications

Brand:	Capricorn	Length:	30 cm
Colour:	dark blue	Material:	PTFE
Filament diameter:	1.75 mm	Outer diameter:	3 mm
Inner diameter:	2 mm	Our item no:	DBW00066

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€12.50 (coming soon)

€10.16 Excl. 23% VAT

Thermistor 100K

Zoom in

Description With the standard thermistor 100K you can perform very stable temperature measurements (up to 250°C). Thanks to its very fast response time and compact size, the thermistor is pleasant to use. This thermistor is placed in a glass casing and can be used at the hot end or the heated bed of your 3D printer.

Downloads: Datasheet

Thermistor brand is: EPCOS
Thermistor type is: B57540G0104J
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Brand:	123-3D	Sensitivity index:	4066K
Max power:	18 mw	Thermal coefficient:	4.5 perc/°c
Mounting:	TH	Thermal time constant:	3 S
Probe diameter:	0.8 mm	Tolerance:	5
Our item no:	DTH00001

Order now, we can ship this today!

€4.25

€3.46 Excl. 23% VAT

In stock

Thermistor 100K pre-shrunk with connector, 1m

Zoom in

Description With this fast-responding 100K thermistor you can take accurate temperature measurements up to a maximum of 250°C.

The compact thermistor is neatly concealed in a piece of fiberglass and equipped with a pre-shrunk cable of 1 metre. The cable is heat resistant (up to 280°C) so that the thermistor functions perfectly when using ABS and PLA filament. The thermistor is equipped with a Molex connector that you can use to connect to Minitronics or Megatronics.

Thermistor brand is: EPCOS
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Brand:	123-3D	Mounting:	TH
Length:	1 m	Probe diameter:	0.15 mm
Max power:	18 mw	Probe length:	40 mm
Max temp:	260 °C	Our item no:	DTH00002

Order now, we can ship this today!

€6.95

€5.65 Excl. 23% VAT

In stock

E3D Thermal Paste, 1 gram

Zoom in

Description Thermal paste improves the thermal transition from the warm to the cold part of the heatbreak. By using thermal paste, the risk of clogging (the softening of the filament in the heatbreak too early) is considerably reduced.

The composition of the paste is as follows: 50% silicone, 20% carbon, 30% metal oxide.

Specifications

Amount:	0.001 kg	Our item no:	DED00085
Brand:	E3D	Weight:	0.003 kg
Safety datasheet:	Safety Information

Order now, we can ship this today!

€2.75

€2.24 Excl. 23% VAT

In stock

E3D v6 heaterblock and mounting materials (old version)

Zoom in

Description This v6 heater block is designed in such a way that it exhibits very good thermal behaviour. Both the heater cartridge and a thermistor can be fixed well and easily on the heater block.

The heater block is also compatible with the MK8 parts due to the internal M6 screw thread. The mounting parts are included.

Please note: this is the old version and cannot be used with the E3D thermistor cartridge.

Specifications

Brand:	E3D	Our item no:	DED00088
Dimensions:	11.5 x 20 x 16 mm	Screwthread type:	M6

€15.00

€12.20 Excl. 23% VAT

EU warehouse

Heatbreak with internal Teflon tube | Prusa MK8 compatible, M6 x 30mm

Zoom in

Description This stainless steel heatbreak is already equipped with an internal PTFE tube. The heat break is compatible with the MK8 extruders and most Prusa 3D printers. The heatbreak has a length of 30mm.

NB! The heatbreak is made of thin-walled stainless steel. Too much force will tear the metal. Always use a counter wrench when tightening the nozzle, so that the force is not applied to the heatbreak.

Specifications

Brand:	123-3D	Material:	Stainless steel
Filament diameter:	1.75 mm	Our item no:	DMK00019
Length:	30 mm	Screwthread type:	M6

Order now, we can ship this today!

€14.00

€11.38 Excl. 23% VAT

In stock

Heatbreak with internal Teflon tube | Prusa MK8 compatible, M6 x 40mm

Zoom in

Description This stainless steel heatbreak is already equipped with an internal PTFE tube. The heatbreak is compatible with the MK8 extruders and most Prusa 3D printers. The heatbreak has a length of 40mm.

NB! The heatbreak is made of thin-walled stainless steel. Too much force will tear the metal. Always use a counter wrench when tightening the nozzle, so that the force is not applied to the heatbreak.

Specifications

Brand:	123-3D	Material:	Stainless steel
Filament diameter:	1.75 mm	Our item no:	DMK00003
Length :	40 mm	Screwthread type:	M6

€14.00

€11.38 Excl. 23% VAT

EU warehouse

Heaterblock insulation cotton

Zoom in

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hot end more stable, which in turn results in better prints.

Specifications

Brand:	123-3D	Our item no:	DVB00017
Dimensions:	75 x 21 mm	Thickness:	3 mm

Order now, we can ship this today!

€1.35

€1.10 Excl. 23% VAT

In stock

Heater block MK8 Prusa compatible

Zoom in

Description This heater block has an M6 thread and can receive a standard heating element. The mounting holes for the thermistor are already present on the heater block. The heater block is compatible with most Prusa 3D printers or MK8 extruders.

Specifications

Brand:	123-3D	Material:	Aluminum
Dimensions:	7 x 20 x 20 mm	Our item no:	DMK00004

€10.50

€8.54 Excl. 23% VAT

EU warehouse

Black silicone sock for MK8 hotend

Zoom in

Description Keep your hot end clean and insulated with this MK8 silicone sock. Using the sock will reduce heat loss and improve print quality, especially when using a cooling fan.

Specifications

Brand:	123-3D	Material:	Silicone
Colour:	black	Our item no:	DAR00089

Order now, we can ship this today!

€3.25

€2.64 Excl. 23% VAT

In stock

Blue silicone sock for MK8 hotend

Zoom in

Description Keep your hot end clean and insulated with this MK8 silicone sock. Using the sock will reduce heat loss and improve print quality, especially when using a cooling fan.

Specifications

Brand:	123-3D	Material:	Silicone
Colour:	blue	Our item no:	DAR00090

Order now, we can ship this today!

€3.25

€2.64 Excl. 23% VAT

In stock

Ceramic heater cartridge | 12V, 40W | 100cm

Zoom in

Description With this 12V ceramic heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 100cm.

NB:
The heater cartridge heats up very quickly and will cause a temperature overshoot with the wrong settings.
Use the following PID settings in the Marlin firmware:
#define DEFAULT_Kp 45.0
#define DEFAULT_Ki 4.2
#define DEFAULT_Kd 120

Click here for more information about the adjustment.

Specifications

Brand:	123-3D	Colour:	red
Cable length:	100 cm	Power rating:	40 W
Cartridge diameter:	6 mm	Our item no:	DTH00018
Cartridge length:	23 mm	Voltage:	12 v

Order now, we can ship this today!

€6.95

€5.65 Excl. 23% VAT

In stock

Ceramic heater cartridge | 12V, 40W | 150cm

Zoom in

Description With this 12V ceramic heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 150cm.

NB:
The heater cartridge heats up very quickly and will cause a temperature overshoot with the wrong settings.

Use the following PID settings in the Marlin firmware:
#define DEFAULT_Kp 45.0
#define DEFAULT_Ki 4.2
#define DEFAULT_Kd 120

Click here for more information about the adjustment.

Specifications

Brand:	123-3D	Power rating:	40 W
Cable length:	150 cm	Our item no:	DTH00007
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	23 mm

Order now, we can ship this today!

€6.50

€5.28 Excl. 23% VAT

In stock

RepRap Micro Swiss A2 hard steel nozzle | M6 thread, 1.75mm x 0.4mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:
	●	Prusa i3 MK3	●	Anycubic
	●	Prusa i3 MK2	●	JGAURORA
	●	Prusa i3 MK2S	●	Printers with a E3D V4 / V5 / V6 1.75 mm hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00006
Material:	Steel	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

RepRap Micro Swiss A2 hard steel nozzle | M6 thread, 1.75mm x 0.6mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:
	●	Prusa i3 MK3	●	Anycubic
	●	Prusa i3 MK2	●	JGAURORA
	●	Prusa i3 MK2S	●	Printers with a E3D V4 / V5 / V6 1.75 mm hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DMS00007
Material:	Steel	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Micro Swiss A2 hard steel nozzle RepRap | M6 thread, 1.75mm x 0.80mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers:
	Prusa i3 MK3	anycubic
	Prusa i3 MK2	JGAURORA
	Prusa i3 MK2S	Printers with a E3D V4 / V5 / V6 1.75 mm Hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DMS00008
Material:	Steel	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

Order now, we can ship this today!

€21.00

€17.07 Excl. 23% VAT

In stock

RepRap Micro Swiss A2 hard steel nozzle | M6 thread, 2.85mm x 0.4mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.4mm.

Compatible with the following printers and parts:
	●	Olson Block	●	Taz Workhorse
	●	Ultimate Maker 2+	●	Lulzbot SL Toolhead
	●	Printers with a E3D V4 / V5 / V6 3mm hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DMS00003
Material:	Steel	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

RapRap Micro Swiss A2 hard steel nozzle | M6 thread, 2.85mm x 0.6mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.6mm.

Compatible with the following printers and parts:
	●	Olson Block	●	Taz Workhorse
	●	Ultimate Maker 2+	●	Lulzbot SL Toolhead
	●	Printers with a E3D V4 / V5 / V6 3.00 mm hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	2.85 mm	Our item no:	DMS00004
Material:	Steel	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

RepRap Micro Swiss A2 hard steel nozzle | M6 thread, 2.85mm x 0.8mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.8mm.

Compatible with the following printers and parts:
	●	Olson Block	●	Taz Workhorse
	●	Ultimate Maker 2+	●	Lulzbot SL Toolhead
	●	Printers with a E3D V4 / V5 / V6 3.00 mm hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DMS00005
Material:	Steel	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Micro Swiss A2 hard steel nozzle for MK8 Hotend, 1.75mm x 0.40mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality Ender-2	MakerBot Replicator z18
	Creality Ender-3	CraftBot 2
	Creality Ender-3 Pro	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Anet A8	TronXY X5S
	Alfawise U20	Tevo Tornado
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10
	Flsun QQ-S	Micro Swiss All Metal Hotend for CR-10s Pro
	Geeetech A10, A20, A30	Snapmaker 3-in-1 3D Printer

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Steel	Our item no:	DMS00009
Nozzle coating:	twinclad XT	Screwthread type:	M6

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this today!

€21.00

€17.07 Excl. 23% VAT

In stock

Micro Swiss A2 hard steel nozzle for MK8 Hotend, 1.75mm x 0.60mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality Ender-2	MakerBot Replicator z18
	Creality Ender-3	CraftBot 2
	Creality Ender-3 Pro	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Anet A8	TronXY X5S
	Alfawise U20	Tevo Tornado
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10
	Flsun QQ-S	Micro Swiss All Metal Hotend for CR-10s Pro
	Geeetech A10, A20, A30	Snapmaker 3-in-1 3D Printer

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Steel	Our item no:	DMS00010
Nozzle coating:	twinclad XT	Screwthread type:	M6

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

Order now, we can ship this today!

€21.00

€17.07 Excl. 23% VAT

In stock

Micro Swiss A2 hard steel nozzle for MK8 Hotend, 1.75mm x 0.80mm

Zoom in

Description The Micro Swiss Hardened steel nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality Ender-2	MakerBot Replicator z18
	Creality Ender-3	CraftBot 2
	Creality Ender-3 Pro	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Anet A8	TronXY X5S
	Alfawise U20	Tevo Tornado
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10
	Flsun QQ-S	Micro Swiss All Metal Hotend for CR-10s Pro
	Geeetech A10, A20, A30	Snapmaker 3-in-1 3D Printer

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Steel	Our item no:	DMS00011
Nozzle coating:	twinclad XT	Screwthread type:	M6

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Micro Swiss all metal Hotend Kit for Creality CR-10S PRO | CR-10 Max

Zoom in

Description

This all-metal hot-end set from Micro Swiss for the Creality CR-10S Pro is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and thus ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost 3x lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heat break
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
silicone sock
Fasteners

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
		Creality CR-10S Pro
		Creality CR 10 Max

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00022

€67.00

€54.47 Excl. 23% VAT

EU warehouse

Micro Swiss Heater Block with silicone sock for CR-10 Printers

Zoom in

Description The Micro Swiss Heater Block with silicone sock is an upgrade for various Creality printers, among others.

Aluminium Heater Block
Silicone Sock
Allen key

Specifications

Brand:	Micro Swiss	Our item no:	DMS00101
Material:	Aluminum

Order now, we can ship this today!

€14.00

€11.38 Excl. 23% VAT

In stock

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 1.75mm x 0.20mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.2mm.

Compatible with the following printers:
	Prusa i3 MK3	anycubic
	Prusa i3 MK2	JGAURORA
	Prusa i3 MK2S	Printers with a E3D V4 / V5 / V6 1.75mm Hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DMS00050
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 1.75mm x 0.40mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:
	Prusa i3 MK3	anycubic
	Prusa i3 MK2	JGAURORA
	Prusa i3 MK2S	Printers with a E3D V4 / V5 / V6 1.75mm Hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00053
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for RepRap | M6 thread, 1.75mm x 0.5mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.5mm.

Compatible with the following printers:
	●	Prusa i3 MK3	●	Anycubic
	●	Prusa i3 MK2	●	JGAURORA
	●	Prusa i3 MK2S	●	Printers with a E3D V4 / V5 / V6 1.75 mm hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DMS00054
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for RepRap | M6 thread, 1.75mm x 0.6mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:
	●	Prusa i3 MK3	●	Anycubic
	●	Prusa i3 MK2	●	JGAURORA
	●	Prusa i3 MK2S	●	Printers with a E3D V4 / V5 / V6 1.75 mm hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DMS00055
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

Order now, we can ship this today!

€19.50

€15.85 Excl. 23% VAT

In stock

Micro Swiss brass coated nozzle for RepRap | M6 thread, 1.75mm x 0.8mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers:
	●	Prusa i3 MK3	●	Anycubic
	●	Prusa i3 MK2	●	JGAURORA
	●	Prusa i3 MK2S	●	Printers with a E3D V4 / V5 / V6 1.75 mm hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DMS00056
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.20mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.2mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.2 mm
Filament diameter:	2.85 mm	Our item no:	DMS00043
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.30mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.3mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.3 mm
Filament diameter:	2.85 mm	Our item no:	DMS00045
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.40mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.4mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DMS00046
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.50mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.5mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.5 mm
Filament diameter:	2.85 mm	Our item no:	DMS00047
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.60mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.6mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	2.85 mm	Our item no:	DMS00048
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€19.50 (coming soon)

€15.85 Excl. 23% VAT

Micro Swiss brass coated nozzle for RepRap | M6 Thread, 2.85mm x 0.80mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 3mm and has an opening of 0.8mm.

Compatible with the following printers and parts:
	Olson Block	Lulzbot SL Toolhead
	Ultimate Maker 2+	Taz Workhorse
	Printers with an E3D V4/V5/V6 3.00mm hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DMS00049
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for hexagon hotend | M6 Thread, 1.7mm x 0.3mm

Zoom in

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.3mm.

Compatible with the following printers and parts:
	●	Robo R1	●	Robo C2
	●	Robo R1 +PLUS	●	Robo R2
	●	Hexagon Hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Our item no:	DMS00064
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for hexagon hotend | M6 Thread, 1.75mm x 0.4mm

Zoom in

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers and parts:
	●	Robo R1	●	Robo C2
	●	Robo R1 +PLUS	●	Robo R2
	●	Hexagon hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMS00065
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for hexagon hotend | M6 Thread, 1.75mm x 0.5mm

Zoom in

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.5mm.

Compatible with the following printers and parts:
	●	Robo R1	●	Robo C2
	●	Robo R1 +PLUS	●	Robo R2
	●	Hexagon Hotend

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DMS00066
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for hexagon hotend | M6 Thread, 1.75mm x 0.8mm

Zoom in

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction.
This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers and parts:
	●	Robo R1	●	Robo C2
	●	Robo R1 +PLUS	●	Robo R2
	●	Hexagon hot end

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DMS00067
Material:	Brass	Screwthread type:	M6
Nozzle coating:	twinclad XT

Filament diameter:

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for MK8 hotend | 1.75mm x 0.20mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.2mm.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality CR-10 V2	MakerBot Replicator z18
	Creality Ender-2	CraftBot 2
	Creality Ender-3	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Snapmaker 3-in-1 3D Printer	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Flsun QQ-S	Geeetech A10, A20, A30

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMS00035
Nozzle coating:	twinclad XT	Screwthread type:	M6

Nozzle diameter:

Order now, we can ship this today!

€19.50

€15.85 Excl. 23% VAT

In stock

Micro Swiss brass coated nozzle for MK8 hotend | 1.75mm x 0.30mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.3mm.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality CR-10 V2	MakerBot Replicator z18
	Creality Ender-2	CraftBot 2
	Creality Ender-3	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Snapmaker 3-in-1 3D Printer	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Flsun QQ-S	Geeetech A10, A20, A30

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMS00036
Nozzle coating:	twinclad XT	Screwthread type:	M6

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for MK8 hotend | 1.75mm x 0.40mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality CR-10 V2	MakerBot Replicator z18
	Creality Ender-2	CraftBot 2
	Creality Ender-3	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Snapmaker 3-in-1 3D Printer	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Flsun QQ-S	Geeetech A10, A20, A30

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMS00037
Nozzle coating:	twinclad XT	Screwthread type:	M6

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss brass coated nozzle for MK8 hotend | 1.75mm x 0.60mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality CR-10 V2	MakerBot Replicator z18
	Creality Ender-2	CraftBot 2
	Creality Ender-3	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Snapmaker 3-in-1 3D Printer	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Flsun QQ-S	Geeetech A10, A20, A30

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMS00038
Nozzle coating:	twinclad XT	Screwthread type:	M6

Nozzle diameter:

Order now, we can ship this today!

€19.50

€15.85 Excl. 23% VAT

In stock

Micro Swiss brass coated nozzle for MK8 Hotend | 1.75mm x 0.80mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers:
	Creality CR-10	MakerBot Replicator 1
	Creality CR-10S	MakerBot Replicator 2
	Creality CR-10S4	MakerBot Replicator 2x
	Creality CR-10S5	MakerBot Replicator 5th Gen
	Creality CR-10 MINI	MakerBot Replicator Mini
	Creality CR-10 V2	MakerBot Replicator z18
	Creality Ender-2	CraftBot 2
	Creality Ender-3	CraftBot PLUS
	Creality CR-20	BQ White box
	Creality CR-20 Pro	BQ Prusa I3 Hephestos
	Snapmaker 3-in-1 3D Printer	TronXY X5S
	Anet A8	Tevo Tornado
	Alfawise U20	Micro Swiss All Metal Hotend for CR-10
	Alfawise U30	Micro Swiss All Metal Hotend for CR-10s Pro
	Flsun QQ-S	Geeetech A10, A20, A30

Specifications

Brand:	Micro Swiss	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMS00039
Nozzle coating:	twinclad XT	Screwthread type:	M6

Nozzle diameter:

€19.50

€15.85 Excl. 23% VAT

EU warehouse

Micro Swiss Plated Wear Resistant MK8 Hotend Upgrade

Zoom in

Description This MK8 full metal hotend upgrade from Micro Swiss. The unique design of the heatsink eliminates the need for a heatbreak PTFE tube. The hotend is covered with a TwinClad XT nickel composite coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

Compatible with the following printers and parts:
	MakerBot Replicator 1	MK8 Hotends
	MakerBot Replicator 2

Specifications

Brand:

Micro Swiss

Our item no:

DMS00018

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€30.50 (coming soon)

€24.80 Excl. 23% VAT

Wanhao/Prusa MK8 nozzle, 0.2mm (123-3D version)

Zoom in

Description This compatible nozzle is suitable for MK8 extruders and intended for filament with a diameter of 1.75mm. The nozzle has a small opening of 0.2mm and is equipped with M6 screw thread. The nozzle has a small opening of

MK8 nozzles are slightly shorter than the older MK7 version. The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMK00002
Nozzle coating:	none	Screwthread type:	M6

Nozzle diameter:

Order now, we can ship this today!

€7.00

€5.69 Excl. 23% VAT

In stock

M6 brass nozzle, 0.20mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.2mm. The nozzle is made of brass and suitable for 1.75 mm filament. The nozzle size is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DMK00013
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Wanhao/Prusa MK8 Nozzle, 0.30mm (123-3D version)

Zoom in

Description This compatible nozzle is suitable for MK8 extruders and intended for filament with a diameter of 1.75mm. The nozzle has an opening of 0.3mm and is provided with M6 screw thread.

MK8 nozzles are slightly shorter than the older MK7 version. The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMK00001
Nozzle coating:	none	Screwthread type:	M6

Nozzle diameter:

Order now, we can ship this today!

€7.00

€5.69 Excl. 23% VAT

In stock

M6 brass nozzle, 0.30mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.3mm. The nozzle is made of brass and suitable for 1.75mm filament. The nozzle size is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.3 mm
Filament diameter:	1.75 mm	Our item no:	DMK00014
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€7.00

€5.69 Excl. 23% VAT

EU warehouse

Wanhao/Prusa MK8 nozzle, 0.40mm (123-3D version)

Zoom in

Description This compatible nozzle is suitable for MK8 extruders and intended for filament with a diameter of 1.75mm. The nozzle has an opening of 0.4mm and is provided with M6 screw thread.

MK8 nozzles are slightly shorter than the older MK7 version. The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMK00000
Nozzle coating:	none	Screwthread type:	M6

Nozzle diameter:

Order now, we can ship this today!

€7.00

€5.69 Excl. 23% VAT

In stock

M6 brass nozzle, 0.40mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.4mm. The nozzle is made of brass and suitable for 1.75mm filament. The size of the nozzle is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DMK00015
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this today!

€5.00

€4.07 Excl. 23% VAT

In stock

Wanhao/Prusa MK8 brass nozzle, 0.50mm (123-3D version)

Zoom in

Description This compatible nozzle is suitable for MK8 extruders and intended for filament with a diameter of 1.75mm. The nozzle has an opening of 0.5mm and is provided with M6 screw thread.

MK8 nozzles are slightly shorter than the older MK7 version. The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass	Our item no:	DMK00011
Nozzle coating:	none	Screwthread type:	M6

Nozzle diameter:

Order now, we can ship this today!

€7.00

€5.69 Excl. 23% VAT

In stock

M6 brass nozzle, 0.50mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.5mm. The nozzle is made of brass and suitable for 1.75mm filament. The size of the nozzle is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DMK00016
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€5.00

€4.07 Excl. 23% VAT

EU warehouse

M6 brass nozzle, 0.60mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.6mm. The nozzle is made of brass and suitable for 1.75mm filament. The nozzle size is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DMK00017
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€5.00

€4.07 Excl. 23% VAT

EU warehouse

M6 brass nozzle, 0.80mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 thread and has an opening of 0.8mm. The nozzle is made of brass and suitable for 1.75mm filament. The size of the nozzle is neatly displayed on the nozzle.

The nozzle is compatible with the following 3D printers:

Anet A6
Anet A8
MakerBot 5th Generation
MakerBot Replicator 2
MakerBot Replicator 2x
Prusa i3 with MK8 extruder
Wanhao 3D Printers
Creality series

Specifications

Brand:	123-3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DMK00018
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this today!

€5.00

€4.07 Excl. 23% VAT

In stock

Oscar3D ECO ruby nozzle, 1.75mm x 0.40mm

Zoom in

Description The Oscar3D ECO ruby nozzle is ideal for robust and stable printing results. Thanks to the wide, flat tip, a perfectly smooth surface is achieved. The built-in ruby, one of the sturdiest materials in the world, ensures that the nozzle hardly wears. You can safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm. You can use the nozzle in combination with an E3D-Hotend/M6.

Specifications

Brand:	Oscar 3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DOS00000
Material:	Brass + red ruby	Screwthread type:	M6
Nozzle coating:	none

Filament diameter:

Nozzle diameter:

€93.00

€75.61 Excl. 23% VAT

EU warehouse

Oscar3D VARIO ruby nozzle, 1.75mm x 0.40mm

Zoom in

Description The Oscar3D VARIO red ruby nozzle has a very fine point, which makes this nozzle extremely suitable for the finest print details. Thanks to the built-in ruby, one of the sturdiest materials in the world, the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm. You can use the nozzle in combination with an E3D hot end/M6.

Specifications

Brand:	Oscar 3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DOS00006
Material:	Brass + red ruby	Screwthread type:	M6
Nozzle coating:	none

Filament diameter:

Nozzle diameter:

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€93.00 (coming soon)

€75.61 Excl. 23% VAT

Oscar3D VARIO ruby nozzle, 2.85mm x 0.80mm

Zoom in

Description The Oscar3D VARIO red ruby nozzle has a very fine point, which makes this nozzle extremely suitable for the finest print details. Thanks to the built-in ruby, one of the sturdiest materials in the world, the nozzle hardly wears. You can therefore safely use this nozzle with abrasive materials, such as filament that is filled with metal or carbon.

The nozzle is suitable for filament with a diameter of 2.85mm and has an opening of 0.8mm. You can use the nozzle in combination with an E3D hot end/M6.

Specifications

Brand:	Oscar 3D	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DOS00020
Material:	Brass + red ruby	Screwthread type:	M6
Nozzle coating:	none

Filament diameter:

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€93.00 (coming soon)

€75.61 Excl. 23% VAT

Oscar3D MK8 ruby nozzle, 1.75mm x 0.40mm

Zoom in

Description This Oscar3D MK8 ruby 1.75 x 0.40mm nozzle is ideal for intensive printer use. The core of the nozzle is ruby ground with a tolerance of ±10 micrometers. The hardness of the ruby makes the nozzle ideal for using materials that would quickly wear down ordinary nozzles. These can be materials such as carbon fibre or metals.

Using a ruby ensures a more constant temperature and more even temperature distribution. This reduces the chance of blockages. The Oscar3D MK8 is also equipped with an M6 brass screw thread with a length of 4.5mm.

Specifications

Brand:	Oscar 3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Nozzle type:	MK8
Material:	Brass + red ruby	Our item no:	DAR00783
Nozzle coating:	none	Screwthread type:	M6

€81.00

€65.85 Excl. 23% VAT

EU warehouse

PTFE/Teflon tape, 12m

Zoom in

Description With PTFE tape you can seal metal or plastic threaded connections. When building a 3D printer, this tape is regularly used at (J-head) hot ends. The flexible Teflon/PTFE tape can be used for both sealing and securing parts. The 12mm wide tape is supplied on a 12 metre roll.

Specifications

Brand:	123-3D	Thickness:	0.1 mm
Length:	12 m	Width:	12 mm
Our item no:	DVB00012

Order now, we can ship this today!

€3.25

€2.64 Excl. 23% VAT

In stock

Ratchet with caps 1/4' nozzle tool

Zoom in

Description This ratchet with different caps is ideal for replacing the nozzle of your 3D printer.

The ratchet has 72 teeth for fine adjustment, comes with a 100mm extension and contains 10 sockets measuring 4, 6, 7, 8, 9, 10, 11, 12 and 13mm.

PLEASE NOTE: When loosening and tightening your nozzle, always use a counter wrench on the heater block, for example, so that the forces do not act on the heatbreak.

Specifications

Brand:

123-3D

Our item no:

DGS00059

Order now, we can ship this today!

€18.50

€15.04 Excl. 23% VAT

In stock

Ceramic heater cartridge | 12V, 40W | 200cm

Zoom in

Description With this 123-3D ceramic heating element, your hot end will heat up in no time!

Are you planning to upgrade the hot end of your 3D printer or to build a 3D printer yourself? Then this ceramic heater cartridge is the right choice! The heating element has a maximum power of 40W and is compatible with most extruders.

The total cable length is 200cm.

Specifications

AWG:	22 awg	Outer diameter:	6 mm
Brand:	123-3D	Power rating:	40 W
Cable length:	200 cm	Our item no:	DTH00020
Colour:	red	Tolerance:	10
Current rating:	3.33 A	Voltage:	12 v
Length:	20 mm

€8.75

€7.11 Excl. 23% VAT

EU warehouse

Bondtech HeatLink heater catridge 24V, 50W

Zoom in

Description The Bondtech 24V 50W Heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 24v 50W Heater is compatible with most 3D printer Hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Brand:	Bondtech	Our item no:	DBO00063
Power rating:	50 W	Voltage:	24 v

€14.00

€11.38 Excl. 23% VAT

EU warehouse

Bondtech HeatLink heater cartridge 12V, 50W

Zoom in

Description The Bondtech 12V 50W Heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 12v 50W Heater is compatible with most 3D printer Hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Brand:	Bondtech	Our item no:	DBO00064
Power rating:	50 W	Voltage:	12 v

€14.00

€11.38 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00078
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.4 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.6mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00079
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.6 mm

Nozzle diameter:

Order now, we can ship this today!

€21.00

€17.07 Excl. 23% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 0.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low, so that filament is extruded smoothly. It has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00080
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	0.8 mm

Nozzle diameter:

Order now, we can ship this today!

€21.00

€17.07 Excl. 23% VAT

In stock

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.0mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00081
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.4mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1.4mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00082
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1.4 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Bondtech CHT® coated brass nozzle MK8, 1.75mm x 1.8mm (M6×1×5×13)

Zoom in

Description

This brass Bondtech CHT nozzle MK8 has a nickel coating and is highly resistant to corrosion. In addition, the friction is low so that filament is extruded smoothly. It has an opening of 1. mm and is suitable for filament with a diameter of 1.75mm and is compatible with 2.85mm filament.

The nozzle is compatible with the following hot ends/blocks:

bq Hephestos, Hephestos 2 and bq Prusa i3 Hephestos
bq Witbox and bq Witbox 2
Creality CR-10, Creality CR-10-S4, Creality CR-10-S5 and Creality CR-10S
MakerBot Replicator, MakerBot Replicator 2, and MakerBot Replicator 2X
Creality Ender 2, Creality Ender 3 Pro, Creality CR-20 Pro and Creality Ender 5
Craftbot family
Creality CR-10 V2, Creality CR-6 SE and Creality CR-10 Smart
Tevo Tornado

Specifications

Brand:	Bondtech	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DBO00083
Material:	Brass	Quantity:	1
Nozzle coating:	nickel plated	Screwthread type:	M6
Nozzle diameter:	1.8 mm

Nozzle diameter:

€21.00

€17.07 Excl. 23% VAT

EU warehouse

Micro Swiss high temperature MK8 heater block upgrade

Zoom in

Description The Micro Swiss heating block upgrade is made of a high-temperature copper-chrome-zirconium alloy allows you to reach temperatures of up to 500°C. This special alloy retains its strength at much higher temperatures compared to a normal copper alloy.

It is compatible with 100K thermistor, cartridge-style thermistors, thermocouple, PT100 and PT1000 sensors.

Specifications

Brand:	Micro Swiss	Our item no:	DMS00122
Dimensions:	10 x 21 x 20 mm	Screwthread type:	M6
Material:	Copper

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Thermistor 100K pre-shrunk with connector, 2m

Zoom in

Description With this fast-responding 100K thermistor you can take accurate temperature measurements up to a maximum of 250°C.

The compact thermistor is neatly concealed in a piece of fiberglass and equipped with a pre-shrunk cable of 1 metre. The cable is heat resistant (up to 280°C) so that the thermistor functions perfectly when using ABS and PLA filament. The thermistor is equipped with a Molex connector that you can use to connect to Minitronics or Megatronics.

Thermistor brand is: EPCOS
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Brand:	123-3D	Mounting:	TH
Length:	2 m	Probe diameter:	0.15 mm
Max power:	18 mw	Probe length:	40 mm
Max temp:	260 °C	Our item no:	DTH00030

Order now, we can ship this today!

€7.95

€6.46 Excl. 23% VAT

In stock

MK8 brass nozzles, 0.40mm (2-pack)(123-3D version)

Zoom in

Description These brass nozzles 0.4mm are suitable for various MK8 hotends and are equipped with M6x1 screw thread. This package contains 2 nozzles.

Specifications

Brand:	123-3D	Nozzle type:	MK8
Filament diameter:	1.75 mm	Our item no:	DMK00034
Material:	Brass	Quantity:	2
Nozzle coating:	none	Screwthread type:	M6
Nozzle diameter:	0.4 mm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€11.25 (coming soon)

€9.15 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

Compatible with the following printers:

Creality CR-10-S5

Creality CR-10-S4

Creality CR-10S

TronXY X5S

Creality CR-10 MINI

MK7, MK8, MK9 Hotends