Duet3D

Duet3D Duet 3 tool distribution board V0.5

Description With the Tool Distribution Board V0.5 from Duet3D you can easily connect multiple toolboards to the Duet 3 CAN-FD bus.

This tool distribution board has the following properties:

4 JST-VH connectors for power supply for toolboards (5A fuses included).
2 RJ connectors for CAN bus to connect to the Duet 3 mainboard and expansion board.
4 2-pin jumpers to remove unused CAN connectors from the tool board.
CAN bus termination jumper if you do not use the CAN_OUT RJ11 port.

Specifications

Brand:	Duet3D	Our item no:	DUE00024
Length:	70 mm	Width:	45 mm

€37.00

€30.08 Excl. 23% VAT

EU warehouse

Duet3D | Duet 3 Expansion Board 3HC V1.02

Zoom in

Description The Duet 3 Expansion Board 3HC V1.02 is a full-featured expansion board for the Duet 3 motherboards. The board contains a powerful 32-bit Atmel ARM Cortex-M4F microcontroller with a speed of up to 120 MHz. The part is also equipped with 3x 5A PWM outputs for extruders, 6 PWM outputs for fans, 6 I/O connectors with 3.3V output signal level and 30V outputs.

Specifications

Brand:	Duet3D	On-board stepper drivers:	3
Dimensions:	100 x 100 mm	Our item no:	DAR00827

Order now, we can ship this today!

€143.50

€116.67 Excl. 23% VAT

In stock

Duet3D PanelDue with display & cable 7" v1.0

Zoom in

Description The PanelDue is equipped with a clear 7" LCD colour touchscreen of 800 x 480 pixels and is suitable for various Duet electronics. The Duet firmware offers standard support for this LCD screen.

The screen comes with a controller board and a 100cm connection cable.

Specifications

Brand:

Duet3D

Our item no:

DUE00012

Order now, we can ship this today!

€115.50

€93.90 Excl. 23% VAT

In stock

Duet3D Expansion header breakout board v1.1

Zoom in

Description This Expansion header breakout board is suitable for second generation Duet boards (Duet Wi-Fi or Duet Ethernet) and offers the possibility to connect 5 stepper motor drivers and 2 heaters.

Specifications

Brand:

Duet3D

Our item no:

DUE00003

€45.50

€36.99 Excl. 23% VAT

EU warehouse

Duet3D PanelDue controller & cable v3.0

Zoom in

Description The PanelDue is a separate controller board for LCD screens. Supplied with cable.

Specifications

Brand:	Duet3D	Our item no:	DUE00010
Dimensions:	73 x 54 mm

€51.50

€41.87 Excl. 23% VAT

EU warehouse

Duet3D Thermocouple board v1.1

Zoom in

Description With this thermocouple board (MAX31855/6) you can easily connect a type K thermocouple to your Duet Wi-Fi or Duet Ethernet. The board has two inputs and can be mixed with the PT100 board.

ATTENTION: always check the type number stated on the chip before connecting.

Specifications

Brand:	Duet3D	Our item no:	DUE00007
Dimensions:	30 x 22 mm	Thermocouple type:	thermocouple type k

€41.50

€33.74 Excl. 23% VAT

EU warehouse

Duet3D PT100 board v1.1

Zoom in

Description With this PT100 board you can easily connect a PT100 sensor to your Duet Wi-Fi or Duet Ethernet.

The board offers the possibility to connect 2 sensors (2-wire or 4-wire) and is equipped with jumpers to switch between 2-wire and 4-wire.

More information for connecting a PT100 sensor can be found via the following link: https://www.duet3d.com/wiki/Connecting_PT100_temperature_sensors

Specifications

Brand:	Duet3D	Our item no:	DUE00008
Dimensions:	32 x 22 mm

€41.50

€33.74 Excl. 23% VAT

EU warehouse

Duet3D IR probe

Zoom in

Description This Duet3D IR probe detects the height of the print bed with infrared light. How exactly does this work? The reflection from the print bed surface is captured by the IR sensor, so that the height can be determined (contactless).

The sensor is supplied with a loose connector and two mounting screws.

NOTE: The sensor does not work with all surfaces. Avoid shiny surfaces!

Specifications

Brand:	Duet3D	Operating volt logic:	3.5 - 25V
Dimensions:	24 x 18 mm	Our item no:	DUE00009

€35.50

€28.86 Excl. 23% VAT

EU warehouse

Jumpers (15-pack)

Zoom in

Description These black jumpers are suitable for various electronics boards such as the Arduino boards, RAMPS and CNC shield. This pack contains 15 jumpers.

Specifications

Brand:	123-3D	Our item no:	DAR00006
Pin pitch:	2.54 mm

Order now, we can ship this today!

€2.50

€2.03 Excl. 23% VAT

In stock

Duet3D duet 3 expansion cini 2+ v1.0

Zoom in

Description The Duet 3 Expansion Mini 2+ is specially designed for the expansion header of the Duet 3 Mini 5+. It offers 2 TMC 2209 stepper drivers with the same configurability as the 5 mounted on the Duet 3 Mini 5+.

View the extensive documentation (external).

Specifications

Brand:	Duet3D	Our item no:	DUE00025
Length:	41.3 mm	Width:	23.8 mm

€33.50

€27.24 Excl. 23% VAT

EU warehouse

Duet3D dueX 5-channel expansion board v0.11

Zoom in

Description This DueX-5 expansion board for the duet ethernet or Wi-Fi offers the following options:

5 x tMC2660 stepper motor driver
5 x extruder heating element output
5 x servo output with 5V and 5V signal levels
5 x end stop input with LED indication. Can also be used as an output (3.3V and 5V compatible)
6 x fan output: 5V -12V switchable
4 x general io pins
12V smps
2 x thermistor inputs
Connections for 2 thermocouple or PT100 daughter boards
Optional 5V external power input to power servos and fans

The board comes with loose molex connectors and the wide ribbon cable for the connection to the mainboard (length 10cm)

Specifications

Brand:	Duet3D	Our item no:	DUE00041
Dimensions:	123 x 100 mm

€132.50

€107.72 Excl. 23% VAT

EU warehouse

Duet3D Magnetic Filament Monitor v1.7

Zoom in

Description This magnetic monitor from Duet3D is a perfect addition to your Duet 2 and Duet 3. It monitors every movement of filament and solves various problems. With this monitor you no longer have to worry about filament that suddenly runs out, an extruder that skips steps or a nozzle that gets stuck.

This product contains: connector pack, Molex-KK-style housing and crimps for connection to the Duet

Specifications

Brand:	Duet3D	Our item no:	DUE00034
Length:	25 mm	Width:	22.5 mm

Order now, we can ship this today!

€71.50

€58.13 Excl. 23% VAT

In stock

Duet3D | Duet 3 Expansion Board 1HCL V1.0a

Zoom in

Description The Duet 3 Expansion 1HCL is a CAN-FD connected expansion board. This is specially designed to enable a stepper motor with a high current supply.

Multiple functions
This expansion board has multiple interfaces to transmit positions and multiple inputs and outputs for functions such as measuring motor temperature, axis end stop and controlling a brake.

Connecting to other boards
The Duet 3 Expansion 1HCL can be connected to the Duet 3 CAN-FD bus with RJ11 connectors (just like the Duet Mainboard 6HC, Duet 3 expansion boards and components). Multiple 1HCL boards can be connected to a bus system with a daisy chain, to provide local power up to 48V. This allows you to assemble larger machines without excessive use of cables.

Specifications

Brand:	Duet3D	On-board stepper drivers:	1
Input voltage:	-	Our item no:	DAR00945
Dimensions:	86 x 58 mm

€105.50

€85.77 Excl. 23% VAT

EU warehouse

Duet3D | Duet 3 Magnetic Encoder

Zoom in

Description The Duet3D Magnetic Encoder is compatible with the Duet 3 Expansion 1HCL. This allows you to accurately measure the position and rotation of the motor, because it uses a hall effect sensor. This detects the rotation of a magnet attached to the back of the motor. The encoder comes with a 150mm ribbon cable and nylon washers to properly mount it to the back of most NEMA 17 motors.

Please note: You will need replacement (longer) motor screws to attach the Duet 3 magnetic encoder to most NEMA 17 motors. These are not included because the length of the screws depends on the length of your engine.

14 bit on-axis magnetic rotation sensor
The sensor supports a maximum of 14500 RPM
Magnet 4mm thick with a diameter of 6mm
SPI output so that the Duet 3 magnetic encoder can communicate with a Duet 3 Expansion 1HCL controller
3.3 V – compatible with the Duet 3 Expansion 1HCL controller (can be expanded to 5V for other devices)
Compatible with all NEMA17 motors. Motors with a free shaft that sits no more than 3.5mm below the rear of the motor should also be compatible. If the free shaft extends out the back, you will need a mounting system that holds the sensor approximately 1mm from the magnet on the shaft.
For use with a NEMA23 and other sizes: Use an adapter plate or mounting system.

Specifications