Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

123-3D transparent PETG filament 1.75mm, 1kg

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01111
Colour:	transparent	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order now, we can ship this tomorrow!

€29.50

€23.98 Excl. 23% VAT

In stock

123-3D transparent turquoise PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The turquoise transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01117
Colour:	turquoise	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order now, we can ship this tomorrow!

€29.50 20% discount:

€23.60

€19.19 Excl. 23% VAT

In stock

123-3D transparent red PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The red transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01178
Colour:	red	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Order now, we can ship this tomorrow!

€29.50 20% discount:

€23.60

€19.19 Excl. 23% VAT

In stock

123-3D transparent PETG filament 1.75mm, 3kg

Zoom in

2
1
0

Description This transparent PETG filament is ideal for sturdy prints. It is less brittle and easier to print than other PETG filaments. In addition, it has good mechanical properties, such as more elasticity, higher resistance to impact, better adhesion between layers and more resistance to temperature changes than PLA. This filament has a diameter of 1.75mm and there is 3kg on the spool.

Specifications

Amount:	3 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01112
Colour:	transparent	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	65 - 85 °C	Outer diameter:	Ø 30.0 cm
Material:	PETG Transparent	Spool width:	10.0 cm
Max deviation:	+mn ± 0.05 mm

Order now, we can ship this tomorrow!

€81.50 20% discount:

€65.20

€53.01 Excl. 23% VAT

In stock

REAL transparent orange PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent orange PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	220 - 250 °C
Colour:	transparent orange	Our item no:	DFE02036
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	30 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PETG	Spool width:	4.5 cm

Order now, we can ship this tomorrow!

€21.50

€17.48 Excl. 23% VAT

In stock

REAL transparent yellow PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent yellow PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	220 - 250 °C
Colour:	transparent yellow	Our item no:	DFE02038
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	30 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PETG	Spool width:	4.5 cm

Order now, we can ship this tomorrow!

€21.50

€17.48 Excl. 23% VAT

In stock

REAL transparent green PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent green PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	220 - 250 °C
Colour:	transparent green	Our item no:	DFE02039
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	30 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PETG	Spool width:	4.5 cm

Order now, we can ship this tomorrow!

€21.50

€17.48 Excl. 23% VAT

In stock

REAL transparent blue PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	220 - 250 °C
Colour:	transparent blue	Our item no:	DFE02043
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	30 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PETG	Spool width:	4.5 cm

Order now, we can ship this tomorrow!

€21.50

€17.48 Excl. 23% VAT

In stock

REAL transparent orange PETG filament 1.75mm, 1kg

Zoom in

Description This transparent orange PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	220 - 250 °C
Colour:	transparent orange	Our item no:	DFE02024
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	30 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	340 m	Outer diameter:	Ø 20.0 cm
Material:	PETG	Spool width:	8.0 cm

Order now, we can ship this tomorrow!

€31.50

€25.61 Excl. 23% VAT

In stock

REAL transparent PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The transparent PETG filament (1.75 mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here .

Specifications

Amount:	1 kg	Nozzle temp range:	220 - 250 °C
Brand:	REAL	Our item no:	DFP02217
Colour:	transparent	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	30 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PETG Transparent	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

Order now, we can ship this tomorrow!

€31.50

€25.61 Excl. 23% VAT

In stock

REAL transparent red PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description The red PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	220 - 250 °C
Brand:	REAL	Our item no:	DFP02230
Colour:	red	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	30 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PETG Transparent	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

Order now, we can ship this tomorrow!

€31.50

€25.61 Excl. 23% VAT

In stock

Polymaker PolyLite transparent PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14210
Colour:	transparent	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

Order now, we can ship this tomorrow!

€32.50

€26.42 Excl. 23% VAT

In stock

eSun transparent PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's transparent filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20212
Colour:	transparent	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG

Order now, we can ship this tomorrow!

€24.50

€19.92 Excl. 23% VAT

In stock

eSun neutral PETG filament 1.75mm, 1kg

Zoom in

Description eSun's neutral PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 250 °C
Brand:	eSun	Our item no:	DFE20045
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	PETG

Order now, we can ship this tomorrow!

€31.50

€25.61 Excl. 23% VAT

In stock

Spectrum clear Premium PCTG filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum Premium PCTG filament is an ideal alternative to PET-G. This filament prints as easily as PET-G, but has improved impact resistance, high stability and low shrinkage. PCTG has an HDT of 76˚C, higher elasticity and high resistance to chemicals. 3D prints made with Spectrum Premium PCTG transparent colours can achieve an almost completely transparent effect. You do not need a heated print chamber to 3D print with this filament. This is a 1.75mm clear filament on a 1kg spool.

Specifications

Amount:	1 kg	Nozzle temp range:	250 - 270 °C
Brand:	Spectrum	Our item no:	DFS10108
Colour:	clear	Spool empty weight:	± 250 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 100 °C	Spool width:	6.7 cm
Material:	PCTG Premium

Order now, we can ship this tomorrow!

€27.50

€22.36 Excl. 23% VAT

In stock

123-3D transparent green PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description

PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. This transparent green 1.75mm PETG filament is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01114
Colour:	green	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

€29.50 20% discount:

€23.60

€19.19 Excl. 23% VAT

EU warehouse

123-3D transparent orange PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The orange transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01115
Colour:	orange	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

€29.50 20% discount:

€23.60

€19.19 Excl. 23% VAT

EU warehouse

123-3D transparent rosé PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The rosé transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01116
Colour:	rose	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

€29.50

€23.98 Excl. 23% VAT

EU warehouse

123-3D transparent blue PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The blue transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01177
Colour:	blue	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

€29.50 20% discount:

€23.60

€19.19 Excl. 23% VAT

EU warehouse

123-3D transparent yellow PETG 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The yellow transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01179
Colour:	yellow	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

€29.50

€23.98 Excl. 23% VAT

EU warehouse

123-3D transparent black PETG filament 1.75mm, 1kg

Zoom in

2
1
0

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The transparent black 1.75mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	123-3D	Our item no:	DFP01181
Colour:	black	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	65 - 85 °C	Inner diameter:	Ø 5.2 cm
Material:	PETG Transparent	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

€29.50 20% discount:

€23.60

€19.19 Excl. 23% VAT

EU warehouse

REAL transparent green PETG filament 1.75mm, 1kg

Zoom in

3
2
1
0

Description The green PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	220 - 250 °C
Brand:	REAL	Our item no:	DFP02366
Colour:	green	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	30 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PETG Transparent	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50

€25.61 Excl. 23% VAT

EU warehouse

Polymaker PolyLite transparent red PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent red appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14291
Colour:	transparent red	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite transparent green PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent green appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage rate, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14293
Colour:	transparent green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Polymaker PolyLite transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent blue appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 240 °C
Brand:	Polymaker	Our item no:	DFP14295
Colour:	transparent blue	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 80 °C	Spool width:	6.8 cm
Material:	PETG

€32.50

€26.42 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent blue PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent blue BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Nozzle temp range:	220 - 260 °C
Brand:	BASF	Our item no:	DFB00051
Colour:	transparent blue	RAL colour no:	5002
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm
Material:	PET

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	transparent	Our item no:	DFB00059
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent green PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent green BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	0.75 kg	Nozzle temp range:	220 - 260 °C
Brand:	BASF	Our item no:	DFB00061
Colour:	transparent green	RAL colour no:	6018
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	5.2 cm
Material:	PET

Colour:

Filament diameter:

1.75 mm

2.85 mm

€31.50

€25.61 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent PET filament 1.75mm, 2.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	2.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	neutral	Our item no:	DFB00066
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Filament print speed:	-	Outer diameter:	Ø 30.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	10.2 cm

Amount:

Colour:

Filament diameter:

€83.00

€67.48 Excl. 23% VAT

EU warehouse

BASF Ultrafuse transparent PET filament 1.75mm, 4.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	4.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	neutral	Our item no:	DFB00069
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Filament print speed:	-	Outer diameter:	Ø 35.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	10.0 cm

Amount:

Colour:

€134.00

€108.94 Excl. 23% VAT

EU warehouse

colorFabb transparent PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	0.75 kg	Material:	PETG Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	transparent	Nozzle temp range:	235 - 255 °C
Filament diameter:	1.75 mm	Our item no:	DFP13075
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70 - 80 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€28.50

€23.17 Excl. 23% VAT

EU warehouse

colorFabb transparent PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing of strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Amount:	2.2 kg	Material:	PETG Economy
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	transparent	Nozzle temp range:	235 - 255 °C
Filament diameter:	1.75 mm	Our item no:	DFP13074
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70 - 80 °C	Outer diameter:	Ø 30.0 cm
Length:	750 m	Spool width:	10.2 cm

€51.50

€41.87 Excl. 23% VAT

EU warehouse

Spectrum glassy Premium PET-G filament 1.75mm, 1kg

Zoom in

1
0

Description Spectrum Premium PET-G filament has almost no shrinkage and absorbs little moisture. This filament combines the advantages of PLA and ABS, making it easy to print and has good adhesion between layers. 3D prints made with a transparent version of this filament can even achieve an almost transparent effect. The good mechanical properties and good resistance to chemicals ensure that this filament can be used for many different types of 3D prints. This is a 1.75mm glassy filament on a 1kg spool.

Specifications

Amount:	1 kg	Nozzle temp range:	230 - 255 °C
Brand:	Spectrum	Our item no:	DFS10101
Colour:	glassy	Spool empty weight:	± 250 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	6.7 cm
Material:	PETG Premium

€25.50

€20.73 Excl. 23% VAT

EU warehouse

123-3D transparent PETG pellets, 5kg

Zoom in

1
0

Description Make your own PETG filament or print directly with pellets thanks to this bag of 123-3D PETG Transparent Pellets. Ideal for makers who want to extrude their own filament or use a pellet extruder on their 3D printer. These undried, colourless pellets offer maximum flexibility for experimenting with dyes or blends.

Specifications

Brand:	123-3D	Our item no:	DPL00051
Colour:	transparent	Weight:	5 kg
Material:	PETG

€75.50

€61.38 Excl. 23% VAT

EU warehouse

123-3D tranparent PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3D.ie is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The black 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Amount:	2.3 kg	Max deviation:	+mn ± 0.05 mm
Brand:	123-3D	Nozzle temp range:	220 - 250 °C
Colour:	transparent	Our item no:	DFE11030
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 60 °C	Inner diameter:	Ø 5.1 cm
Length:	750 m	Outer diameter:	Ø 30.0 cm
Material:	PETG	Spool width:	10.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€64.50 (coming soon)

€52.44 Excl. 23% VAT

REAL transparent yellow PETG filament 1.75mm, 1kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	220 - 250 °C
Colour:	transparent yellow	Our item no:	DFE02008
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	30 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	340 m	Outer diameter:	Ø 20.0 cm
Material:	PETG	Spool width:	8.0 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

BASF Ultrafuse transparent PET filament 1.75mm, 8.5kg

Zoom in

Description The neutral BASF PET filament (1.75mm) is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Amount:	8.5 kg	Material:	PET
Brand:	BASF	Nozzle temp range:	220 - 260 °C
Colour:	neutral	Our item no:	DFB00072
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Filament print speed:	-	Outer diameter:	Ø 37.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	17.0 cm

Amount:

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€257.00 (coming soon)

€208.94 Excl. 23% VAT

123-3D PETG pellets, 1kg

Zoom in

Description PETG pellets can be used by enthusiastic DIY'ers to make PETG filament themselves. The pellets can also be used with a direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have yet been added.

Specifications

Amount:	1 kg	Colour:	neutral
Brand:	123-3D	Our item no:	DPL00002

Order now, we can ship this tomorrow!

€8.50 20% discount:

€6.80

€5.53 Excl. 23% VAT

In stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€18.25

€14.84 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	143 mm
Diameter:	33 mm	Our item no:	DAR00884
Download SDS:	Download	Volume:	80ml

Order now, we can ship this tomorrow!

€7.25

€5.89 Excl. 23% VAT

In stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Volume:	100ml
Height:	150 mm

Order now, we can ship this tomorrow!

€7.75

€6.30 Excl. 23% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

Order now, we can ship this tomorrow!

€9.75

€7.93 Excl. 23% VAT

In stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Brand:	123-3D	Dimensions:	160 x 180 x 125 mm
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this tomorrow!

€10.25

€8.33 Excl. 23% VAT

In stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Brand:	123-3D	Our item no:	DRW00069
Colour:	white

Order now, we can ship this tomorrow!

€12.50

€10.16 Excl. 23% VAT

In stock

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00005
Diameter:	53 mm	Volume:	400ml
Dimensions:	300 mm

Order now, we can ship this tomorrow!

€12.75

€10.37 Excl. 23% VAT

In stock

3D Printed spool holder

Zoom in

Description This flexible solution of PLA 3D printed parts is suitable as a spool holder for various sizes of spools. Easy to use and also suitable for heavier 3kg and 5kg spools. Cardboard spools are also no problem for this spool holder.

Specifications

Brand:	RepRapWorld	Our item no:	DFR00004
Material:	PLA

Order now, we can ship this tomorrow!

€21.50

€17.48 Excl. 23% VAT

In stock

eSun Pro 3 eVacuum kit

Zoom in

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

Order now, we can ship this tomorrow!

€26.50

€21.54 Excl. 23% VAT

In stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Brand:	Smooth-On	Volume:	181 grams
Our item no:	DAR00876

Order now, we can ship this tomorrow!

€29.50

€23.98 Excl. 23% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this tomorrow!

€34.75

€28.25 Excl. 23% VAT

In stock

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Our item no:	DAR01819
Filament diameter:	1.75 mm

Order now, we can ship this tomorrow!

€42.50

€34.55 Excl. 23% VAT

In stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Brand:	Sunlu	Dimensions:	237 x 271 x 100 mm
Colour:	white	Our item no:	DFB00006

Order now, we can ship this tomorrow!

€50.50

€41.06 Excl. 23% VAT

In stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Brand:	Smooth-On	Volume:	644 grams
Our item no:	DAR00877

Order now, we can ship this tomorrow!

€61.50

€50.00 Excl. 23% VAT

In stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Brand:	Sunlu	Our item no:	DAR00698
Colour:	black	Temp range:	35-70 °C
Dimensions:	274 x 265 x 118 mm	Voltage:	24 v
Input voltage:	100-240V	Weight:	11.9 kg
Power rating:	48 W

Order now, we can ship this tomorrow!

€73.50

€59.76 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this tomorrow!

€76.50

€62.20 Excl. 23% VAT

In stock

REAL neutral PVA Plus filament 1.75mm, 0.5kg

Zoom in

Description The neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PVA Plus is ideal in combination with PETG and has a print temperature of up to 255 degrees.

Specifications

Amount:	0.5 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFP02386
Colour:	neutral	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	35 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PVA PLUS	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

€58.50

€47.56 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Brand:	Polymaker	Our item no:	DAR00634
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg

€73.50

€59.76 Excl. 23% VAT

EU warehouse

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Brand:	Sunlu	Power rating:	320 W
Dimensions:	350 x 516 x 278 mm	Our item no:	DAR01448
Input voltage:	110-240V	Weight:	4.8 kg

€149.50

€121.54 Excl. 23% VAT

EU warehouse

REAL neutral PVA Plus filament 1.75mm, 0.5kg

Zoom in

Description The neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	235 - 255 °C
Colour:	neutral	Our item no:	DFV02002
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PVA PLUS	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon)

€46.75 Excl. 23% VAT

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Brand:

eSun

Our item no:

DAR01365

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.50 (coming soon)

€21.54 Excl. 23% VAT

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

Transparent

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

Transparent