1.75mm PLA marble

colorFabb light grey Stonefill filament 1.75mm, 0.7kg

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This light grey colorFabb filament has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	light grey	Our item no:	DFP13205
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

Colour:

Filament diameter:

€37.50

€30.49 Excl. 23% VAT

EU warehouse

colorFabb moss green Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour moss green has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	green	Our item no:	DFP13237
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

Colour:

Filament diameter:

€37.50

€30.49 Excl. 23% VAT

EU warehouse

colorFabb red brick Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder is added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour 'red brick' has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	red	Our item no:	DFP13235
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

Colour:

Filament diameter:

€37.50

€30.49 Excl. 23% VAT

EU warehouse

eSun eMarble white PLA filament 1.75mm, 1kg

Zoom in

Description The white eMarble filament from eSun has a marble appearance. You can easily print the material with your 3D printer. This eSun eMarble PLA filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	180 - 210 °C
Brand:	eSun	Our item no:	DFE20061
Colour:	marble	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	6.5 cm
Material:	eMarble PLA

Order now, we can ship this tomorrow!

€31.50

€25.61 Excl. 23% VAT

In stock

SUNLU marble PLA filament 1.75mm, 1kg

Zoom in

Description With 1.75mm marble PLA filament you give your prints a unique appearance. Create objects with a realistic marble look, such as busts, sculptures or miniatures of buildings. The PLA filament is easy to print with (without a heated bed) and ensures that you do not suffer from distortion and warping of prints.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	Sunlu	Nozzle temp range:	200 - 230
Colour:	marble	Our item no:	DFP00171
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 30 °C	Inner diameter:	Ø 7.3 cm
Length:	330 m	Outer diameter:	Ø 19.6 cm
Material:	PLA	Spool width:	6.0 cm

Order now, we can ship this tomorrow!

€29.50

€23.98 Excl. 23% VAT

In stock

Polymaker Panchroma™ sandstone Marble PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Sandstone colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14476
Colour:	sandstone	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Polymaker Panchroma™ slate grey Marble PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Slate Grey colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14477
Colour:	slate grey	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Polymaker Panchroma™ white Marble PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble White colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14478
Colour:	white	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

Order now, we can ship this tomorrow!

€24.50

€19.92 Excl. 23% VAT

In stock

Polymaker Panchroma™ limestone Marble PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Limestone colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14533
Colour:	limestone	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Polymaker Panchroma™ brick Marble PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Brick colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14534
Colour:	brick	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Spectrum Stone Age dark PLA filament 1.75mm, 1kg

Zoom in

Description Create 3D prints that look like they are made of stone with Stone Age Dark PLA from Spectrum. Thanks to the stone look of this filament, the layer lines are also less visible. This makes PLA Stone Age very suitable for making decorative and architectural models. This filament is 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Material:	Stonefill
Brand:	Spectrum	Nozzle temp range:	185 - 225 °C
Colour:	grey	Our item no:	DFS10052
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Order now, we can ship this tomorrow!

€26.50

€21.54 Excl. 23% VAT

In stock

Spectrum Stone Age light PLA filament 1.75mm, 1kg

Zoom in

Description Create 3D prints that look like they are made of stone with Stone Age Light PLA from Spectrum. Thanks to the stone look of this filament, the layer lines are also less visible. This makes PLA Stone Age very suitable for making decorative and architectural models. This filament is 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Material:	Stonefill
Brand:	Spectrum	Nozzle temp range:	185 - 225 °C
Colour:	grey	Our item no:	DFS10053
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

€26.50

€21.54 Excl. 23% VAT

EU warehouse

123-3D grey PLA marble filament 1.75mm, 1kg

Zoom in

Description 123-3D verison 1.75mm PLA Marble filament creates 3D prints tthat have the appearance that they are made of stone. The layer lines are less visible and the surface feels rough, making the filament look marble-like.

Key Features:

Make it look like the 3D print is made of stone
Rough surface
Non-shrinking and non-abrasive
Less visible layer lines and high durability

Applications: Ideal for creating decorative designs, architectural models, mock-ups and prototypes.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	123-3D	Our item no:	DHM00110
Colour:	grey	Roundness:	>95%
Density:	1.24	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Marble	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

grey

white

Order now, we can ship this tomorrow!

€28.50

€23.17 Excl. 23% VAT

In stock

123-3D marble white PLA filament 1.75mm, 1kg

Zoom in

Make it look like the 3D print is made of stone
Rough surface
Non-shrinking and non-abrasive
Less visible layer lines and high durability

Applications: Ideal for creating decorative designs, architectural models, mock-ups and prototypes.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	123-3D	Our item no:	DHM00111
Colour:	white	Roundness:	>95%
Density:	1.24	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Marble	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

grey

white

Please note: The delivery time for this item is currently unknown.

Order now, we can ship this tomorrow!

€28.50

€23.17 Excl. 23% VAT

In stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Magigoo 3D Glide Kit

Zoom in

Description With the Magigoo Glide Kit, you can apply an even layer of adhesive to your print bed in a single motion. Ideal for large surfaces and frequent use.

Specifications

Brand:	Magigoo	Type:	glue stick
Our item no:	DAR02392	Volume:	250 ml

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

€18.25

€14.84 Excl. 23% VAT

EU warehouse

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Amount:	0.1 kg	Filament diameter:	1.75 mm
Brand:	123-3D	Nozzle temp range:	210 - 225 °C
Colour:	neutral	Our item no:	DFR00000

Order now, we can ship this tomorrow!

€10.25

€8.33 Excl. 23% VAT

In stock

123-3D adhesive spray, 150ml

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download	Volume:	150 ml

Order now, we can ship this tomorrow!

€8.50

€6.91 Excl. 23% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

€9.75

€7.93 Excl. 23% VAT

EU warehouse

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	300 mm
Diameter:	53 mm	Our item no:	DVB00005
Download SDS:	Download	Volume:	400ml

Variant:

Nylon (30 ml)

Plus (100 ml)

Stick (80 ml)

Order now, we can ship this tomorrow!

€12.75

€10.37 Excl. 23% VAT

In stock

BIQU Panda Storage Rack for 3D filament

Zoom in

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D filaments. Thanks to its stackable design and narrow depth, this rack can hold up to 40+ spools without taking up unnecessary space in your workspace. Ideal for home use or in a professional workshop.

Specifications

Brand:	BIQU	Our item no:	DAR02687
Colour:	black	Quantity:	1
Dimensions:	1,320 x 635 x 330 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€63.50

(coming soon)

€51.63 Excl. 23% VAT

eSun Pro 3 eVacuum kit

Zoom in

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

Order now, we can ship this tomorrow!

€26.50

€21.54 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this tomorrow!

€76.50

€62.20 Excl. 23% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Filament diameter:	1.75 mm
Manual:	Download	Our item no:	DAR01819

Order now, we can ship this tomorrow!

€42.50

€34.55 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm -

€5.25

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

123-3D Filament Spool Holder

Zoom in

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications