Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00

123-3D black PLA filament

In stock

€19.95

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

1 - 24 of 41

123-3D sand PLA filament 1.75mm, 1.1kg

123-3D sand PLA filament 1.75mm, 1.1kg DFP01152

2
1
0

Description Our sand 1.75mm PLA filament has been improved! It has an improved composition but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odourless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1kg of filament instead of 1kg!

Read more about printing with PLA filament here.

Specifications

Amount:	1.1 kg	Nozzle temp range:	195 - 235 °C
Brand:	123-3D	Our item no:	DFP01152
Colour:	beige	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	55 - 75 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA Mineral	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

€28.50 20% discount:

€22.80 (Incl. 23% VAT) (€18.54 Excl. 23% VAT)

EU warehouse

colorFabb light grey Stonefill filament 1.75mm, 0.7kg

colorFabb light grey Stonefill filament 1.75mm, 0.7kg DFP13205

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This light grey colorFabb filament has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	light grey	Our item no:	DFP13205
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

€37.50 (Incl. 23% VAT) (€30.49 Excl. 23% VAT)

EU warehouse

colorFabb moss green Stonefill filament 1.75mm, 0.7kg

colorFabb moss green Stonefill filament 1.75mm, 0.7kg DFP13237

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour moss green has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	green	Our item no:	DFP13237
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

€37.50 (Incl. 23% VAT) (€30.49 Excl. 23% VAT)

EU warehouse

colorFabb red brick Stonefill filament 1.75mm, 0.7kg

colorFabb red brick Stonefill filament 1.75mm, 0.7kg DFP13235

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder is added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour 'red brick' has a diameter of 1.75mm.

Specifications

Amount:	0.7 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	195 - 220 °C
Colour:	red	Our item no:	DFP13235
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	Stonefill

€37.50 (Incl. 23% VAT) (€30.49 Excl. 23% VAT)

EU warehouse

eSun eMarble white PLA filament 1.75mm, 1kg

eSun eMarble white PLA filament 1.75mm, 1kg DFE20061

Description The white eMarble filament from eSun has a marble appearance. You can easily print the material with your 3D printer. This eSun eMarble PLA filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	180 - 210 °C
Brand:	eSun	Our item no:	DFE20061
Colour:	marble	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	6.5 cm
Material:	eMarble PLA

Order now, we can ship this today!

€31.50 (Incl. 23% VAT) (€25.61 Excl. 23% VAT)

In stock

Polymaker PolyTerra marble-white PLA filament 1.75mm, 1kg

Polymaker PolyTerra marble-white PLA filament 1.75mm, 1kg DFP14234

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'marble-white' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14234
Colour:	marble white	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA

Colour:

army dark green

Show more

Order now, we can ship this today!

€21.50 (Incl. 23% VAT) (€17.48 Excl. 23% VAT)

In stock

SUNLU marble PLA filament 1.75mm, 1kg

SUNLU marble PLA filament 1.75mm, 1kg DFP00171

Description With 1.75mm marble PLA filament you give your prints a unique appearance. Create objects with a realistic marble look, such as busts, sculptures or miniatures of buildings. The PLA filament is easy to print with (without a heated bed) and ensures that you do not suffer from distortion and warping of prints.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	Sunlu	Nozzle temp range:	200 - 230
Colour:	marble	Our item no:	DFP00171
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 30 °C	Inner diameter:	Ø 7.3 cm
Length:	330 m	Outer diameter:	Ø 19.6 cm
Material:	PLA	Spool width:	6.0 cm

Order now, we can ship this today!

€29.50 (Incl. 23% VAT) (€23.98 Excl. 23% VAT)

In stock

Polymaker Panchroma™ sandstone Marble PLA filament 1.75mm, 1kg

Polymaker Panchroma™ sandstone Marble PLA filament 1.75mm, 1kg DFP14476

1
0

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Sandstone colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14476
Colour:	sandstone	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50 (Incl. 23% VAT) (€19.92 Excl. 23% VAT)

EU warehouse

Polymaker Panchroma™ slate grey Marble PLA filament 1.75mm, 1kg

Polymaker Panchroma™ slate grey Marble PLA filament 1.75mm, 1kg DFP14477

1
0

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Slate Grey colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14477
Colour:	slate grey	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50 (Incl. 23% VAT) (€19.92 Excl. 23% VAT)

EU warehouse

Polymaker Panchroma™ white Marble PLA filament 1.75mm, 1kg

Polymaker Panchroma™ white Marble PLA filament 1.75mm, 1kg DFP14478

1
0

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble White colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14478
Colour:	white	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50 (Incl. 23% VAT) (€19.92 Excl. 23% VAT)

EU warehouse

Polymaker Panchroma™ limestone Marble PLA filament 1.75mm, 1kg

Polymaker Panchroma™ limestone Marble PLA filament 1.75mm, 1kg DFP14533

1
0

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Limestone colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14533
Colour:	limestone	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50 (Incl. 23% VAT) (€19.92 Excl. 23% VAT)

EU warehouse

Polymaker Panchroma™ brick Marble PLA filament 1.75mm, 1kg

Polymaker Panchroma™ brick Marble PLA filament 1.75mm, 1kg DFP14534

1
0

Description Polymaker Panchroma Marble PLA is an environmentally friendly and reliable PLA filament. It is stronger than regular PLA, has a matte marble look. This makes it ideal for making prints that look like they are made of marble. This product has a Marble Brick colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14534
Colour:	brick	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Marble

Colour:

€24.50 (Incl. 23% VAT) (€19.92 Excl. 23% VAT)

EU warehouse

Spectrum Stone Age dark PLA filament 1.75mm, 1kg

Spectrum Stone Age dark PLA filament 1.75mm, 1kg DFS10052

1
0

Description Create 3D prints that look like they are made of stone with Stone Age Dark PLA from Spectrum. Thanks to the stone look of this filament, the layer lines are also less visible. This makes PLA Stone Age very suitable for making decorative and architectural models. This filament is 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Nozzle temp range:	185 - 225 °C
Brand:	Spectrum	Our item no:	DFS10052
Colour:	grey	Spool empty weight:	± 250 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 45 °C	Spool width:	6.7 cm
Material:	Stonefill

€26.50 (Incl. 23% VAT) (€21.54 Excl. 23% VAT)

EU warehouse

Spectrum Stone Age light PLA filament 1.75mm, 1kg

Spectrum Stone Age light PLA filament 1.75mm, 1kg DFS10053

1
0

Description Create 3D prints that look like they are made of stone with Stone Age Light PLA from Spectrum. Thanks to the stone look of this filament, the layer lines are also less visible. This makes PLA Stone Age very suitable for making decorative and architectural models. This filament is 1.75mm and comes on a 1kg spool.

Specifications

Amount:	1 kg	Nozzle temp range:	185 - 225 °C
Brand:	Spectrum	Our item no:	DFS10053
Colour:	grey	Spool empty weight:	± 250 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 45 °C	Spool width:	6.7 cm
Material:	Stonefill

€26.50 (Incl. 23% VAT) (€21.54 Excl. 23% VAT)

EU warehouse

123-3D grey PLA marble filament 1.75mm, 1kg

123-3D grey PLA marble filament 1.75mm, 1kg DHM00110

1
0

Description 123-3D verison 1.75mm PLA Marble filament creates 3D prints tthat have the appearance that they are made of stone. The layer lines are less visible and the surface feels rough, making the filament look marble-like.

Key Features:

Make it look like the 3D print is made of stone
Rough surface
Non-shrinking and non-abrasive
Less visible layer lines and high durability

Applications: Ideal for creating decorative designs, architectural models, mock-ups and prototypes.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	123-3D	Our item no:	DHM00110
Colour:	grey	Roundness:	>95%
Density:	1.24	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Marble	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

€28.50 (Incl. 23% VAT) (€23.17 Excl. 23% VAT)

EU warehouse

123-3D marble white PLA filament 1.75mm, 1kg

123-3D marble white PLA filament 1.75mm, 1kg DHM00111

1
0

Description 123-3D verison 1.75mm PLA Marble filament creates 3D prints tthat have the appearance that they are made of stone. The layer lines are less visible and the surface feels rough, making the filament look marble-like.

Key Features:

Make it look like the 3D print is made of stone
Rough surface
Non-shrinking and non-abrasive
Less visible layer lines and high durability

Applications: Ideal for creating decorative designs, architectural models, mock-ups and prototypes.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	123-3D	Our item no:	DHM00111
Colour:	white	Roundness:	>95%
Density:	1.24	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Marble	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Please note: The delivery time for this item is currently unknown.

€28.50 (Incl. 23% VAT) (€23.17 Excl. 23% VAT)

EU warehouse

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50 (Incl. 23% VAT) (€37.80 Excl. 23% VAT)

EU warehouse

3DLAC adhesive spray, 400ml

3DLAC adhesive spray, 400ml DVB00005

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00005
Diameter:	53 mm	Volume:	400ml
Dimensions:	300 mm

Order now, we can ship this today!

€12.75 (Incl. 23% VAT) (€10.37 Excl. 23% VAT)

In stock

Magigoo 3D Glide Kit

Magigoo 3D Glide Kit DAR02392

1
0

Description With the Magigoo Glide Kit, you can apply an even layer of adhesive to your print bed in a single motion. Ideal for large surfaces and frequent use.

Specifications

Brand:	Magigoo	Volume:	250 ml
Type:	glue stick

€97.50 (Incl. 23% VAT) (€79.27 Excl. 23% VAT)

EU warehouse

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Volume:	100ml
Height:	150 mm

Order now, we can ship this today!

€7.75 (Incl. 23% VAT) (€6.30 Excl. 23% VAT)

In stock

3DLAC stick, 80ml

3DLAC stick, 80ml DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	143 mm
Diameter:	33 mm	Our item no:	DAR00884
Download SDS:	Download	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT) (€5.89 Excl. 23% VAT)

In stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this today!

€18.25 (Incl. 23% VAT) (€14.84 Excl. 23% VAT)

In stock

Magigoo Supergrip

Magigoo Supergrip DAR02394

1
0

Description Ensures strong first-layer adhesion to the print bed and prevents warping on materials like PP, PA, and PC. Easy to apply and remove after printing. Works on glass, PEI, and metal beds.

Specifications

Brand:	Magigoo	Type:	glue stick
Quantity:	1	Volume:	50 ml

€24.50 (Incl. 23% VAT) (€19.92 Excl. 23% VAT)

EU warehouse

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

© 2025 - 123-3d.ie