Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00

123-3D black PLA filament

In stock

€19.95

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

View 2.85mm LW-PLA Filament

1 - 24 of 37

colorFabb yellow LW-PLA filament 1.75mm, 0.75kg

colorFabb yellow LW-PLA filament 1.75mm, 0.75kg DFP13193

Description This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	yellow	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13193
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€34.50 (Incl. 23% VAT) (€28.05 Excl. 23% VAT)

EU warehouse

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg DFP13020

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour grey-silver has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	grey/silver	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13020
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this today!

€34.50 (Incl. 23% VAT) (€28.05 Excl. 23% VAT)

In stock

colorFabb green LW-PLA filament 1.75mm, 0.75kg

colorFabb green LW-PLA filament 1.75mm, 0.75kg DFP13191

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	green	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13191
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€34.50 (Incl. 23% VAT) (€28.05 Excl. 23% VAT)

EU warehouse

colorFabb natural LW-PLA filament 1.75mm, 0.75kg

colorFabb natural LW-PLA filament 1.75mm, 0.75kg DFP13022

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour natural has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13022
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this today!

€34.50 (Incl. 23% VAT) (€28.05 Excl. 23% VAT)

In stock

colorFabb red LW-PLA filament 1.75mm, 0.75kg

colorFabb red LW-PLA filament 1.75mm, 0.75kg DFP13024

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour red has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	red	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13024
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€34.50 (Incl. 23% VAT) (€28.05 Excl. 23% VAT)

EU warehouse

colorFabb black LW-PLA filament 1.75mm, 0.75kg

colorFabb black LW-PLA filament 1.75mm, 0.75kg DFP13018

Description This black LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13018
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Order now, we can ship this today!

€34.50 (Incl. 23% VAT) (€28.05 Excl. 23% VAT)

In stock

colorFabb dark grey LW-PLA-HT filament 1.75mm, 0.75kg

colorFabb dark grey LW-PLA-HT filament 1.75mm, 0.75kg DFP13251

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75mm and has a dark grey colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13251
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

€44.50 (Incl. 23% VAT) (€36.18 Excl. 23% VAT)

EU warehouse

colorFabb olive green LW-PLA-HT filament 1.75mm, 0.75kg

colorFabb olive green LW-PLA-HT filament 1.75mm, 0.75kg DFP13249

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut and tear. This filament has a diameter of 1.75mm and has an olive green colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13249
Colour:	olive green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

€44.50 (Incl. 23% VAT) (€36.18 Excl. 23% VAT)

EU warehouse

colorFabb white LW-PLA-HT filament 1.75mm, 0.75kg

colorFabb white LW-PLA-HT filament 1.75mm, 0.75kg DFP13245

Description The colorFabb LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC airplanes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75mm and is white in colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13245
Colour:	white	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

€44.50 (Incl. 23% VAT) (€36.18 Excl. 23% VAT)

EU warehouse

colorFabb black LW-PLA-HT filament 1.75mm, 0.75kg

colorFabb black LW-PLA-HT filament 1.75mm, 0.75kg DFP13247

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75 mm and is black in colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13247
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

€44.50 (Incl. 23% VAT) (€36.18 Excl. 23% VAT)

EU warehouse

eSun black ePLA-LW filament 1.75mm, 1kg

eSun black ePLA-LW filament 1.75mm, 1kg DFE20226

Description eSun ePLA-LW Black is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.

The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers.

Density from 0.54 grams per cm3
Foaming volume ratio of 220%
Manually adjust the strength and foaming ratio
Matte surface
Good adhesion between layers
Easy to dye
Easy to print

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 270 °C
Brand:	eSun	Our item no:	DFE20226
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA Light weight

€38.00 (Incl. 23% VAT) (€30.89 Excl. 23% VAT)

EU warehouse

eSun natural ePLA-LW filament 1.75mm, 1kg

eSun natural ePLA-LW filament 1.75mm, 1kg DFE20225

Description eSun ePLA-LW Natural is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.

The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers.

Density from 0.54 grams per cm3
Foaming volume ratio of 220%
Manually adjust the strength and foaming ratio
Matte surface
Good adhesion between layers
Easy to dye
Easy to print

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 270 °C
Brand:	eSun	Our item no:	DFE20225
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePLA-LW

€38.00 (Incl. 23% VAT) (€30.89 Excl. 23% VAT)

EU warehouse

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50 (Incl. 23% VAT) (€37.80 Excl. 23% VAT)

EU warehouse

3DLAC adhesive spray, 400ml

3DLAC adhesive spray, 400ml DVB00005

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00005
Diameter:	53 mm	Volume:	400ml
Dimensions:	300 mm

Order now, we can ship this today!

€12.75 (Incl. 23% VAT) (€10.37 Excl. 23% VAT)

In stock

Magigoo 3D Glide Kit

Magigoo 3D Glide Kit DAR02392

1
0

Description With the Magigoo Glide Kit, you can apply an even layer of adhesive to your print bed in a single motion. Ideal for large surfaces and frequent use.

Specifications

Brand:	Magigoo	Volume:	250 ml
Type:	glue stick

€97.50 (Incl. 23% VAT) (€79.27 Excl. 23% VAT)

EU warehouse

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Volume:	100ml
Height:	150 mm

Order now, we can ship this today!

€7.75 (Incl. 23% VAT) (€6.30 Excl. 23% VAT)

In stock

3DLAC stick, 80ml

3DLAC stick, 80ml DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	143 mm
Diameter:	33 mm	Our item no:	DAR00884
Download SDS:	Download	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT) (€5.89 Excl. 23% VAT)

In stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this today!

€18.25 (Incl. 23% VAT) (€14.84 Excl. 23% VAT)

In stock

Magigoo Supergrip

Magigoo Supergrip DAR02394

1
0

Description Ensures strong first-layer adhesion to the print bed and prevents warping on materials like PP, PA, and PC. Easy to apply and remove after printing. Works on glass, PEI, and metal beds.

Specifications

Brand:	Magigoo	Type:	glue stick
Quantity:	1	Volume:	50 ml

€24.50 (Incl. 23% VAT) (€19.92 Excl. 23% VAT)

EU warehouse

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

3D print post-processing set

3D print post-processing set DAR00620

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

Order now, we can ship this today!

€9.75 (Incl. 23% VAT) (€7.93 Excl. 23% VAT)

In stock

123-3D cleaning filament 1.75mm, 100g

123-3D cleaning filament 1.75mm, 100g DFR00000

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Amount:	0.1 kg	Filament diameter:	1.75 mm
Brand:	123-3D	Nozzle temp range:	210 - 225 °C
Colour:	neutral	Our item no:	DFR00000

Order now, we can ship this today!

€10.25 (Incl. 23% VAT) (€8.33 Excl. 23% VAT)

In stock

Smooth-On XTC-3D coating (181 gr = A+B)

Smooth-On XTC-3D coating (181 gr = A+B) DAR00876

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Brand:	Smooth-On	Volume:	181 grams
Our item no:	DAR00876

Order now, we can ship this today!

€29.50 (Incl. 23% VAT) (€23.98 Excl. 23% VAT)

In stock

Smooth-On XTC-3D coating (644 gr = A+B)

Smooth-On XTC-3D coating (644 gr = A+B) DAR00877

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Brand:	Smooth-On	Volume:	644 grams
Our item no:	DAR00877

Order now, we can ship this today!

€61.50 (Incl. 23% VAT) (€50.00 Excl. 23% VAT)

In stock

© 2025 - 123-3d.ie