Buy 3D printers, filament, parts & tools | lowest prices | 123-3D.ie

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Official Reviews.io

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: €0.00

123-3D black PLA filament

In stock

€19.95

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

View 2.85mm PC PETG Filament

REAL black PC-PETG filament 1.75mm, 1kg

REAL black PC-PETG filament 1.75mm, 1kg DFE02060

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	225 - 245 °C
Colour:	black	Our item no:	DFE02060
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	340 m	Outer diameter:	Ø 20.0 cm
Material:	PETG 85% - Carbon 15%	Spool width:	8.0 cm

€72.50 (Incl. 23% VAT) (€58.94 Excl. 23% VAT)

EU warehouse

REAL black PC-PETG filament 1.75mm, 0.5kg

REAL black PC-PETG filament 1.75mm, 0.5kg DFE02062

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	225 - 245 °C
Colour:	black	Our item no:	DFE02062
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PETG 85% - Carbon 15%	Spool width:	4.5 cm

Order now, we can ship this today!

€42.50 (Incl. 23% VAT) (€34.55 Excl. 23% VAT)

In stock

REAL black PC-PETG filament 1.75mm, 3kg

REAL black PC-PETG filament 1.75mm, 3kg DFP12062

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Specifications

Amount:	3 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	225 - 245 °C
Colour:	black	Our item no:	DFP12062
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.1 cm
Length:	1,020 m	Outer diameter:	Ø 30.0 cm
Material:	PETG 85% - Carbon 15%	Spool width:	10.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€147.50 (coming soon) (Incl. 23% VAT) (€119.92 Excl. 23% VAT)

Magigoo 3D Pro glue stick kit for ABS, PA, PC and PP filament

Magigoo 3D Pro glue stick kit for ABS, PA, PC and PP filament DCP00211

Description This kit contains four Magigoo 3D glue sticks. The Magigoo 3D Pro glue stick kit is suitable for printing with ABS, PA, PC and PP filament. The sticks ensure perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, you can simply remove it. The glue sticks are easy to use and prevent warping of prints.

Specifications

Brand:	Magigoo	Type:	glue stick
Our item no:	DCP00211

Order now, we can ship this today!

€81.50 (Incl. 23% VAT) (€66.26 Excl. 23% VAT)

In stock

REAL black PC-PETG filament 1.75mm, 1kg

REAL black PC-PETG filament 1.75mm, 1kg DFP02381

2
1
0

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament has PETG as a base and contains 15% carbon particles. This gives PC-PETG the optimal balance between strength, stability and optical clarity. Prints with PC-PETG are more resistant to heat and look matte and modern.

Specifications

Amount:	1 kg	Nozzle temp range:	225 - 245 °C
Brand:	REAL	Our item no:	DFP02381
Colour:	black	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	35 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PETG Carbon	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

€73.50 (Incl. 23% VAT) (€59.76 Excl. 23% VAT)

EU warehouse

REAL black PC-PETG filament 1.75mm, 3kg

REAL black PC-PETG filament 1.75mm, 3kg DFP02382

2
1
0

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Specifications

Amount:	3 kg	Nozzle temp range:	225 - 245 °C
Brand:	REAL	Our item no:	DFP02382
Colour:	black	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	35 - 60 °C	Outer diameter:	Ø 30.0 cm
Material:	PETG Carbon	Spool width:	10.5 cm
Max deviation:	+mn ± 0.05 mm

€152.50 (Incl. 23% VAT) (€123.98 Excl. 23% VAT)

EU warehouse

REAL neutral PVA Plus filament 1.75mm, 0.5kg

REAL neutral PVA Plus filament 1.75mm, 0.5kg DFV02002

Description The neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	235 - 255 °C
Colour:	neutral	Our item no:	DFV02002
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PVA PLUS	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon) (Incl. 23% VAT) (€46.75 Excl. 23% VAT)

3DLAC adhesive spray, 400ml

3DLAC adhesive spray, 400ml DVB00005

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00005
Diameter:	53 mm	Volume:	400ml
Dimensions:	300 mm

Order now, we can ship this today!

€12.75 (Incl. 23% VAT) (€10.37 Excl. 23% VAT)

In stock

REAL neutral PVA Plus filament 1.75mm, 0.5kg

REAL neutral PVA Plus filament 1.75mm, 0.5kg DFP02386

Description The neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PVA Plus is ideal in combination with PETG and has a print temperature of up to 255 degrees.

Specifications

Amount:	0.5 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFP02386
Colour:	neutral	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	35 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PVA PLUS	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

€58.50 (Incl. 23% VAT) (€47.56 Excl. 23% VAT)

EU warehouse

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Volume:	100ml
Height:	150 mm

Order now, we can ship this today!

€7.75 (Incl. 23% VAT) (€6.30 Excl. 23% VAT)

In stock

3DLAC stick, 80ml

3DLAC stick, 80ml DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	143 mm
Diameter:	33 mm	Our item no:	DAR00884
Download SDS:	Download	Volume:	80ml

Order now, we can ship this today!

€7.25 (Incl. 23% VAT) (€5.89 Excl. 23% VAT)

In stock

123-3D PETG pellets, 1kg

123-3D PETG pellets, 1kg DPL00002

Description PETG pellets can be used by enthusiastic DIY'ers to make PETG filament themselves. The pellets can also be used with a direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have yet been added.

Specifications

Amount:	1 kg	Colour:	neutral
Brand:	123-3D	Our item no:	DPL00002

Order now, we can ship this today!

€8.50 20% discount:

€6.80 (Incl. 23% VAT) (€5.53 Excl. 23% VAT)

In stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this today!

€18.25 (Incl. 23% VAT) (€14.84 Excl. 23% VAT)

In stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this today!

€4.75 (Incl. 23% VAT) (€3.86 Excl. 23% VAT)

In stock

3D print post-processing set

3D print post-processing set DAR00620

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

Order now, we can ship this today!

€9.75 (Incl. 23% VAT) (€7.93 Excl. 23% VAT)

In stock

Smooth-On XTC-3D coating (181 gr = A+B)

Smooth-On XTC-3D coating (181 gr = A+B) DAR00876

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Brand:	Smooth-On	Volume:	181 grams
Our item no:	DAR00876

Order now, we can ship this today!

€29.50 (Incl. 23% VAT) (€23.98 Excl. 23% VAT)

In stock

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50 (Incl. 23% VAT) (€37.80 Excl. 23% VAT)

EU warehouse

Smooth-On XTC-3D coating (644 gr = A+B)

Smooth-On XTC-3D coating (644 gr = A+B) DAR00877

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Brand:	Smooth-On	Volume:	644 grams
Our item no:	DAR00877

Order now, we can ship this today!

€61.50 (Incl. 23% VAT) (€50.00 Excl. 23% VAT)

In stock

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit DFR00002

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Brand:	123-3D	Dimensions:	160 x 180 x 125 mm
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

€10.25 (Incl. 23% VAT) (€8.33 Excl. 23% VAT)

In stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this today!

€76.50 (Incl. 23% VAT) (€62.20 Excl. 23% VAT)

In stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this today!

€34.75 (Incl. 23% VAT) (€28.25 Excl. 23% VAT)

In stock

SUNLU FilaDryer S1 drybox

SUNLU FilaDryer S1 drybox DFB00006

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Brand:	Sunlu	Dimensions:	237 x 271 x 100 mm
Colour:	white	Our item no:	DFB00006

Order now, we can ship this today!

€50.50 (Incl. 23% VAT) (€41.06 Excl. 23% VAT)

In stock

SUNLU FilaDryer S2 drybox

SUNLU FilaDryer S2 drybox DAR00698

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Brand:	Sunlu	Our item no:	DAR00698
Colour:	black	Temp range:	35-70 °C
Dimensions:	274 x 265 x 118 mm	Voltage:	24 v
Input voltage:	100-240V	Weight:	11.9 kg
Power rating:	48 W

Order now, we can ship this today!

€73.50 (Incl. 23% VAT) (€59.76 Excl. 23% VAT)

In stock

Polymaker PolyBox™ Edition II filament drybox

Polymaker PolyBox™ Edition II filament drybox DAR00634

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Brand:	Polymaker	Our item no:	DAR00634
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg

€73.50 (Incl. 23% VAT) (€59.76 Excl. 23% VAT)

EU warehouse

Smart bluetooth hygrometer

Smart bluetooth hygrometer DRW00069

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Brand:	123-3D	Our item no:	DRW00069
Colour:	white

Order now, we can ship this today!

€12.50 (Incl. 23% VAT) (€10.16 Excl. 23% VAT)

In stock

eSun Pro 3 eVacuum kit

eSun Pro 3 eVacuum kit DAR01277

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

Order now, we can ship this today!

€26.50 (Incl. 23% VAT) (€21.54 Excl. 23% VAT)

In stock

eSun eVacuum kit

eSun eVacuum kit DAR01365

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Brand:

eSun

Our item no:

DAR01365

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.50 (coming soon) (Incl. 23% VAT) (€21.54 Excl. 23% VAT)

SUNLU FilaDryer S4 drybox

SUNLU FilaDryer S4 drybox DAR01448

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Brand:	Sunlu	Power rating:	320 W
Dimensions:	350 x 516 x 278 mm	Our item no:	DAR01448
Input voltage:	110-240V	Weight:	4.8 kg

Order now, we can ship this today!

€149.50 (Incl. 23% VAT) (€121.54 Excl. 23% VAT)

In stock

SUNLU filament connector

SUNLU filament connector DAR01819

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Our item no:	DAR01819
Filament diameter:	1.75 mm

Order now, we can ship this today!

€42.50 (Incl. 23% VAT) (€34.55 Excl. 23% VAT)

In stock

3D Printed spool holder

3D Printed spool holder DFR00004

Description This flexible solution of PLA 3D printed parts is suitable as a spool holder for various sizes of spools. Easy to use and also suitable for heavier 3kg and 5kg spools. Cardboard spools are also no problem for this spool holder.

Specifications

Brand:	RepRapWorld	Our item no:	DFR00004
Material:	PLA

Order now, we can ship this today!

€21.50 (Incl. 23% VAT) (€17.48 Excl. 23% VAT)

In stock

© 2025 - 123-3d.ie