View all flexible filaments

123-3D transparent flexible TPE filament 2.85mm, 0.5kg

Description The transparent TPE flexible filament from 123-3D.ie has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	123-3D	Nozzle temp range:	220 - 260 °C
Colour:	neutral	Our item no:	DFF08005
Filament diameter:	2.85 mm	Roundness:	>95%
Hardness:	45D	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 95 °C	Outer diameter:	Ø 20.0 cm
Length:	70 m	Spool width:	5.5 cm
Material:	TPE

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€34.50 (coming soon)

€28.05 Excl. 23% VAT

123-3D neutral PVA Pro filament 2.85mm, 0.5kg

Zoom in

Description PVA Pro filament from 123-3D.ie dissolves completely in (cold or warm) water after 3D printing. That means you can effortlessly remove support print layers. PVA Pro has all the benefits of standard PVA, plus better thermal stability and improved adhesion to PLA, ABS and PETG. With PVA Pro you get the most out of your dual extruder Ultimaker 3D printer.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	123-3D	Nozzle temp range:	180 - 205 °C
Colour:	neutral	Our item no:	DFV03001
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	40 - 60 °C	Inner diameter:	Ø 5.2 cm
Length:	60 m	Outer diameter:	Ø 20.0 cm
Material:	PVA Pro	Spool width:	5.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€44.50 (coming soon)

€36.18 Excl. 23% VAT

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00219
Colour:	black	RAL colour no:	9005
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon)

€23.17 Excl. 23% VAT

colorFabb varioShore pale pink TPU Prosthetic filament 2.85mm, 0.7kg

Zoom in

Description This pale pink colorFabb TPU Prosthetic filament has been specially developed for printing prostheses and orthoses. The filament contains silver, which has favourable properties for prosthetic and orthopaedic applications. TPU Prosthetic has a variable hardness, is low in weight and soft to the touch.

VarioShore TPU Prosthetic filament is available in natural colour and in three skin colours: pale pink, medium brown and dark brown. If you print the filament at a lower temperature, the print will have a more intense skin colour. A higher temperature produces a more powdery skin tone with a soft appearance.

This colorFabb filament in the color pale pink has a diameter of 2.85mm.

Specifications

Amount:	0.7 kg	Material:	TPU
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	pink	Nozzle temp range:	190 - 250 °C
Filament diameter:	2.85 mm	Our item no:	DFP13234
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	20 - 40 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€49.50 (coming soon)

€40.24 Excl. 23% VAT

NinjaTek Cheetah fire red TPU filament 3mm, 1kg

Zoom in

Description This fire red SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	red	Our item no:	DFF02048
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€69.50 (coming soon)

€56.50 Excl. 23% VAT

NinjaTek Cheetah Lava TPU SemiFlex filament 3mm, 0.5kg

Zoom in

Description This Lava orange Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	orange	Our item no:	DFF02040
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€46.50 (coming soon)

€37.80 Excl. 23% VAT

NinjaTek Cheetah Midnight TPU SemiFlex filament 3mm, 0.5kg

Zoom in

Description This Midnight black SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	black	Our item no:	DFF02022
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€46.50 (coming soon)

€37.80 Excl. 23% VAT

NinjaTek Cheetah Snow TPU SemiFlex filament 3mm, 0.75kg

Zoom in

Description This Snow white Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.75 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	white	Our item no:	DFF02032
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm
Length:	94 m

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon)

€46.75 Excl. 23% VAT

NinjaTek Cheetah steel grey TPU filament 3mm, 0.5kg

Zoom in

Description This steel silver/grey SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	industrial grey	Our item no:	DFF02061
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€46.50 (coming soon)

€37.80 Excl. 23% VAT

NinjaTek Cheetah sun yellow TPU filament 3mm, 1kg

Zoom in

Description This sun yellow SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	yellow	Our item no:	DFF02066
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€69.50

€56.50 Excl. 23% VAT

EU warehouse

NinjaTek Chinchilla NT midnight black TPE filament 2.85mm, 0.5kg

Zoom in

Description This midnight black NinjaTek Chinchilla NT is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 0.5kg roll contains 12.85mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	225 - 235 °C
Colour:	metallic midnight black	Our item no:	DFF02106
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:	75A	Spool width:	5.5 cm
Heated bed temp:	20 - 40 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon)

€46.75 Excl. 23% VAT

NinjaTek NinjaFlex flamingo pink TPU filament 3mm, 0.5kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	pink	Our item no:	DFF02072
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.5 cm
Heated bed temp:	20 - 50 °C

€46.50

€37.80 Excl. 23% VAT

EU warehouse

NinjaTek NinjaFlex grass green TPU filament 3mm, 0.5kg

Zoom in

Description This grass green NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble rubber. TPU filament adheres well to the heated bed and to the other print layers. It also features a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	green	Our item no:	DFF02074
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.5 cm
Heated bed temp:	20 - 50 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€46.50 (coming soon)

€37.80 Excl. 23% VAT

NinjaTek NinjaFlex midnight black TPU filament 3mm, 0.5kg

Zoom in

Description This midnight black NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble rubber. TPU filament adheres well to the heated bed and to the other print layers. It also features a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	black	Our item no:	DFF02078
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.5 cm
Heated bed temp:	20 - 50 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon)

€46.75 Excl. 23% VAT

NinjaTek NinjaFlex snow TPU flexible filament 3mm, 1kg

Zoom in

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	white	Our item no:	DFF02086
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.5 cm
Heated bed temp:	20 - 50 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€69.50 (coming soon)

€56.50 Excl. 23% VAT

NinjaTek NinjaFlex sun TPU flexible filament 3mm, 0.5kg

Zoom in

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	yellow	Our item no:	DFF02092
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.5 cm
Heated bed temp:	20 - 50 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€46.50 (coming soon)

€37.80 Excl. 23% VAT

NinjaTek NinjaFlex sun yellow TPU filament 3mm, 0.75kg

Zoom in

Description This sun yellow NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the (heated) bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.75 kg	Length:	94 m
Brand:	NinjaTek	Material:	TPU 85A
Colour:	yellow	Nozzle temp range:	220 - 230 °C
Download TDS:	Download	Our item no:	DFF02013
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€57.50

€46.75 Excl. 23% VAT

EU warehouse

NinjaTek NinjaFlex water TPU flexible filament 3mm, 0.5kg

Zoom in

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU 85A
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	neutral	Our item no:	DFF02095
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.5 cm
Heated bed temp:	20 - 50 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€46.50 (coming soon)

€37.80 Excl. 23% VAT

Polymaker PolyFlex orange TPU95 filament 2.85mm, 0.75kg

Zoom in

Description The orange Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Amount:	0.75 kg	Material:	TPU95
Brand:	Polymaker	Nozzle temp range:	210 - 230 °C
Colour:	orange	Our item no:	DFP14025
Filament diameter:	2.85 mm	Spool empty weight:	± 125 grams
Filament print speed:	-	Inner diameter:	Ø 5.5 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€37.50 (coming soon)

€30.49 Excl. 23% VAT

Polymaker PolyFlex red TPU95 filament 2.85mm, 0.75kg

Zoom in

Description The red Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85 mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Specifications

Amount:	0.75 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP14179
Colour:	red	Spool empty weight:	± 125 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Material:	TPU95A

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.50 (coming soon)

€26.42 Excl. 23% VAT

Polymaker PolyFlex white TPU95 filament 2.85mm, 0.75kg

Zoom in

Description The white Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Amount:	0.75 kg	Material:	TPU95
Brand:	Polymaker	Nozzle temp range:	210 - 230 °C
Colour:	white	Our item no:	DFP14031
Filament diameter:	2.85 mm	Spool empty weight:	± 125 grams
Filament print speed:	-	Inner diameter:	Ø 5.5 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€37.50 (coming soon)

€30.49 Excl. 23% VAT

REAL neutral PA filament 2.85mm, 0.5kg

Zoom in

Description This neutral PA (2.85mm) filament is professional, strong and made from nylon. This 3D printing material has excellent mechanical and chemical properties. PA is also distinguished by its very low water absorption. The material can be printed at a relatively low temperature and can be used with almost all FFF and FDM printers.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	240 - 260 °C
Colour:	neutral	Our item no:	DFN02007
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	80 - 100 °C	Inner diameter:	Ø 5.5 cm
Length:	75 m	Outer diameter:	Ø 20.0 cm
Material:	Nylon	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€39.50 (coming soon)

€32.11 Excl. 23% VAT

REAL neutral PVA Pro filament 2.85mm, 0.5kg

Zoom in

Description The neutral PVA Pro is the ideal support filament (2.85mm) for ABS. This material is suitable for printing temperatures up to 250°C. PVA Pro adheres perfectly to ABS, ASA and TPU98A. The material dissolves slowly, but completely, in lukewarm, running water. This makes it possible to create cavities and floating parts in your ABS 3D prints.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	235 - 255 °C
Colour:	neutral	Our item no:	DFV02005
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	60 m	Outer diameter:	Ø 20.0 cm
Material:	PVA Pro	Spool width:	4.5 cm

Order now, we can ship this today!

€57.50

€46.75 Excl. 23% VAT

In stock

REAL neutral TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description This neutral (milky/white) 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimal print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30 to 40 mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	225 - 245 °C
Colour:	neutral	Our item no:	DFF03019
Filament diameter:	2.85 mm	Roundness:	>95%
Hardness:	98A	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	TPU	Spool width:	4.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

REAL red TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description With this strong and flexible red TPU filament (2.85mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Nozzle temp range:	225 - 245 °C
Brand:	REAL	Our item no:	DFF03023
Colour:	red	RAL colour no:	3020
Filament diameter:	2.85 mm	Roundness:	>95%
Hardness:	98A	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	TPU	Spool width:	4.5 cm
Max deviation:	+mn ± 0.10 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

REAL neutral PVA filament 2.85mm, 0.5kg

Zoom in

Description This Real PVA (PolyVinylAlcohol) 2.85mm filament is a warm water soluble filament that is ideal to use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the coil after opening at room temperature under conditions that are as dry as possible. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum print temperature is 225°C

Read more about printing with PVA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	190 - 210 °C
Colour:	neutral	Our item no:	DFV02001
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.5 cm
Length:	60 m	Outer diameter:	Ø 20.0 cm
Material:	PVA	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

123-3D white TPE Filament 2.85mm, 0.5kg

Zoom in

Description The white TPE flexible filaments from 123-3D.ie have the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	123-3D	Nozzle temp range:	220 - 260 °C
Colour:	white	Our item no:	DFF08007
Filament diameter:	2.85 mm	RAL colour no:	9003
Hardness:	45D	Roundness:	>95%
Heated bed temp:	0 - 95 °C	Inner diameter:	Ø 5.2 cm
Length:	70 m	Outer diameter:	Ø 20.0 cm
Material:	TPE	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

BASF Ultrafuse blue TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The blue Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00211
Colour:	blue	RAL colour no:	5002
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse yellow TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00212
Colour:	yellow	RAL colour no:	1003
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse green TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This green Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00213
Colour:	green	RAL colour no:	6018
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse orange TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This orange Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00215
Colour:	orange	RAL colour no:	2008
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg

Zoom in

Description The red Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00216
Colour:	red	RAL colour no:	3020
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Material:	TPC 45D
Brand:	BASF	Nozzle temp range:	230 - 250 °C
Colour:	pink	Our item no:	DFB00217
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00218
Colour:	silver	RAL colour no:	9006
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

NinjaTek Cheetah midnight black TPU filament 3mm, 1kg

Zoom in

Description This 'Midnight' black Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	black	Our item no:	DFF02047
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€76.50

€62.20 Excl. 23% VAT

EU warehouse

NinjaTek Cheetah sapphire blue TPU filament 3mm, 0.5kg

Zoom in

Description This sapphire blue Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	blue	Our item no:	DFF02057
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€46.50

€37.80 Excl. 23% VAT

EU warehouse

NinjaTek Cheetah Sapphire TPU SemiFlex filament 3mm, 0.75kg

Zoom in

Description This Sapphire blue SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.75 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	blue	Our item no:	DFF02025
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:		Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm
Length:	94 m

€57.50

€46.75 Excl. 23% VAT

EU warehouse

NinjaTek Cheetah Snow TPU SemiFlex filament 3mm, 0.5kg

Zoom in

Description This Snow white Cheetah 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. SemiFlex can print objects in any shape, provides elastic end results and has a shore hardness of 85A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	white	Our item no:	DFF02044
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€46.50

€37.80 Excl. 23% VAT

EU warehouse

NinjaTek Cheetah water neutral TPU filament 3mm, 0.5kg

Zoom in

Description This semi-transparent SemiFlex 3D filament (3mm) is a flexible TPU filament, which is slightly stiffer than Ninjaflex. Semi Flex can print objects in any shape, provides elastic end results and has a shore hardness of 98A. TPU filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPU filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	230 - 250 °C
Colour:	neutral	Our item no:	DFF02067
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€46.50

€37.80 Excl. 23% VAT

EU warehouse

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 0.5kg

Zoom in

Description This snow white NinjaTek Chinchilla NT filament is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 0.5kg roll contains 2.85mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	225 - 235 °C
Colour:	snow white	Our item no:	DFF02102
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:	75A	Spool width:	5.5 cm
Heated bed temp:	20 - 40 °C

Order now, we can ship this today!

€57.50

€46.75 Excl. 23% VAT

In stock

NinjaTek NinjaFlex sapphire blue TPU filament 3mm, 0.5kg

Zoom in

Description This sapphire blue NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble rubber. TPU filament adheres well to the (heated) bed and to the other print layers. It also features a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	blue	Our item no:	DFF02083
Download TDS:	Download	Inner diameter:	Ø 5.1 cm
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Hardness:		Spool width:	5.5 cm
Heated bed temp:	20 - 50 °C

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Polymaker PolyFlex black TPU90 filament 2.85mm, 0.75kg

Zoom in

Description The black Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 90A and is highly resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Amount:	0.75 kg	Material:	TPU90
Brand:	Polymaker	Nozzle temp range:	210 - 230 °C
Colour:	black	Our item no:	DFP14019
Filament diameter:	2.85 mm	Spool empty weight:	± 125 grams
Filament print speed:	-	Inner diameter:	Ø 5.5 cm
Hardness:	90A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm

€42.50

€34.55 Excl. 23% VAT

EU warehouse

Polymaker PolyFlex transparent TPU-90A filament 2.85mm, 0.75kg

Zoom in

Description The neutral transparent Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 90A and is highly resistant to high tensile force, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal printing temperature is 210 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Specifications

Amount:	0.75 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP14370
Colour:	transparent	Spool empty weight:	± 125 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Material:	TPU90

€43.50

€35.37 Excl. 23% VAT

EU warehouse

Polymaker PolyFlex grey TPU90 filament 2.85mm, 0.75kg

Zoom in

Description This grey Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 90A and is highly resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you can print at high speeds. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Amount:	0.75 kg	Material:	TPU90
Brand:	Polymaker	Nozzle temp range:	210 - 230 °C
Colour:	grey	Our item no:	DFP14017
Filament diameter:	2.85 mm	Spool empty weight:	± 125 grams
Filament print speed:	-	Inner diameter:	Ø 5.5 cm
Hardness:	90A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm

Order now, we can ship this today!

€42.50

€34.55 Excl. 23% VAT

In stock

Polymaker PolyFlex black TPU95 filament 2.85mm, 0.75kg

Zoom in

Description The black Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Specifications

Amount:	0.75 kg	Material:	TPU95
Brand:	Polymaker	Nozzle temp range:	210 - 230 °C
Colour:	black	Our item no:	DFP14027
Filament diameter:	2.85 mm	Spool empty weight:	± 125 grams
Filament print speed:	-	Inner diameter:	Ø 5.5 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm

Order now, we can ship this today!

€37.50

€30.49 Excl. 23% VAT

In stock

Polymaker PolyFlex blue TPU95 filament 2.85mm, 0.75kg

Zoom in

Description The blue Polymaker PolyFlex is a high-quality and extra flexible TPU filament with a diameter of 2.85mm. This durable material has a Shore hardness of 95A and is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal print temperature is 210 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Specifications

Amount:	0.75 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP14177
Colour:	blue	Spool empty weight:	± 125 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Material:	TPU95

Order now, we can ship this today!

€32.50

€26.42 Excl. 23% VAT

In stock

Polymaker PolyFlex black TPU95-HF filament 2.85mm, 1kg

Zoom in

Description The black Polymaker PolyFlex TPU95-HF is a high-quality and flexible filament with a diameter of 2.85mm. This durable material is resistant to high tensile strength, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 25°C to 50°C.

Specifications

Amount:	1 kg	Material:	TPU95-HF
Brand:	Polymaker	Nozzle temp range:	200 - 220 °C
Colour:	black	Our item no:	DFP14029
Filament diameter:	2.85 mm	Spool empty weight:	± 140 grams
Filament print speed:	-	Inner diameter:	Ø 5.5 cm
Hardness:	95A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	6.8 cm

€52.50

€42.68 Excl. 23% VAT

EU warehouse

Polymaker PolyFlex clear TPU-95A High Speed filament 2.85mm, 1kg

Zoom in

Description The transparent Polymaker PolyFlex TPU95-HF is a high-quality and flexible filament with a diameter of 2.85mm. This durable material is resistant to high tensile force, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal printing temperature is 200 to 220°C. For the best result, use a heated bed of 25 to 50°C.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 220 °C
Brand:	Polymaker	Our item no:	DFP14374
Colour:	transparent	Spool empty weight:	± 140 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	6.8 cm
Material:	TPU95-HF

€53.50

€43.50 Excl. 23% VAT

EU warehouse

REAL neutral PVA filament 2.85mm, 0.5kg

Zoom in

Description This Real PVA (PolyVinylAlcohol) 2.85mm filament is a (warm) water-soluble filament that is ideal for use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the coil at room temperature under conditions that are as dry as possible after opening. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum printing temperature is 210°C.

Read more about printing with PVA filament here.

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Nozzle temp range:	190 - 210 °C
Brand:	REAL	Our item no:	DFP02385
Colour:	neutral	Roundness:	>95%
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PVA	Spool width:	7.0 cm
Max deviation:	+mn ± 0.10 mm

€48.50

€39.43 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00

View all flexible filaments

Popular products