Buy 3D printers, filament, parts & tools | lowest prices

BASF Ultrafuse green TPC 45D filament 1.75mm, 0.5kg

Description The green Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00204
Colour:	green	RAL colour no:	6018
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€32.50 (coming soon)

€26.42 Excl. 23% VAT

BASF Ultrafuse neutral TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This neutral colour BASF Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Material:	TPC 45D
Brand:	BASF	Nozzle temp range:	230 - 250 °C
Colour:	neutral	Our item no:	DFB00205
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon)

€23.17 Excl. 23% VAT

BASF Ultrafuse red TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The red Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00207
Colour:	red	RAL colour no:	3020
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon)

€23.17 Excl. 23% VAT

BASF Ultrafuse pink TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250 °C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Material:	TPC 45D
Brand:	BASF	Nozzle temp range:	230 - 250 °C
Colour:	pink	Our item no:	DFB00208
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon)

€23.17 Excl. 23% VAT

123-3D adhesive spray, 150ml

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download

Order now, we can ship this today!

€8.50

€6.91 Excl. 23% VAT

In stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications