1.75mm PLA recycled

REAL blue PLA Recycled filament 1.75mm, 1kg

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This blue PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP02315
Colour:	blue	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0 - 55 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Recycled	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL grey PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This grey PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP12045
Colour:	grey	RAL colour no:	7009
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.5 cm
Length:	330 m	Outer diameter:	Ø 20.0 cm
Material:	PLA Recycled	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL green PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This green PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP02309
Colour:	green	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0 - 55 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Recycled	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

REAL orange PLA Recycled filament 1.75mm, 1kg

Zoom in

Description The orange REAL Recycled PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP02321
Colour:	orange	RAL colour no:	8001
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.6 cm
Material:	PLA Recycled	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	7.0 cm

Colour:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

REAL orange PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This orange PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA, you have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP12046
Colour:	orange	RAL colour no:	8001
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.5 cm
Length:	330 m	Outer diameter:	Ø 20.0 cm
Material:	PLA Recycled	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

REAL red PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This red PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, with this ultra-strong PLA, you have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP12031
Colour:	red	RAL colour no:	3011
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.5 cm
Length:	330 m	Outer diameter:	Ø 20.0 cm
Material:	PLA Recycled	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL white PLA recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This white PLA filament is made from the manufacturer's industrial residues to prevent waste. The remains are recycled into a brand new filament with the same, or even better, properties than the original. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, with this ultra-strong PLA you have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP02317
Colour:	white	RAL colour no:	9016
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.6 cm
Material:	PLA Recycled	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	7.0 cm

Amount:

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

EU warehouse

REAL white PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This white PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP12038
Colour:	white	RAL colour no:	9016
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.5 cm
Length:	330 m	Outer diameter:	Ø 20.0 cm
Material:	PLA Recycled	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL white PETG recycled filament 1.75mm, 5kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you also have virtually no problems with warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Amount:	5 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP02318
Colour:	white	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	0 - 55 °C	Outer diameter:	Ø 35.0 cm
Material:	PLA Recycled	Spool width:	10.5 cm
Max deviation:	+mn ± 0.05 mm

Amount:

Colour:

Filament diameter:

€157.50

€128.05 Excl. 23% VAT

EU warehouse

REAL silver PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This silver PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP12042
Colour:	silver	RAL colour no:	7003
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.5 cm
Length:	330 m	Outer diameter:	Ø 20.0 cm
Material:	PLA Recycled	Spool width:	8.0 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€31.50 (coming soon)

€25.61 Excl. 23% VAT

REAL black PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This black PLA filament is made from the manufacturer's industrial remains to prevent waste. The remains are recycled into a brand new filament with the same, or even better, properties than the original. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, with this ultra-strong PLA you have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP02311
Colour:	black	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	0 - 55 °C	Inner diameter:	Ø 5.6 cm
Material:	PLA Recycled	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	7.0 cm

Amount:

Colour:

Filament diameter:

€31.50

€25.61 Excl. 23% VAT

In stock

REAL black PLA recycled filament 1.75mm, 5kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This black PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure quality and longevity.

Specifications

Amount:	5 kg	Nozzle temp range:	190 - 220 °C
Brand:	REAL	Our item no:	DFP02312
Colour:	black	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	0 - 55 °C	Outer diameter:	Ø 35.0 cm
Material:	PLA Recycled	Spool width:	10.5 cm
Max deviation:	+mn ± 0.05 mm

Amount:

Colour:

Filament diameter:

€137.50

€111.79 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Magigoo 3D Glide Kit

Zoom in

Description With the Magigoo Glide Kit, you can apply an even layer of adhesive to your print bed in a single motion. Ideal for large surfaces and frequent use.

Specifications

Brand:	Magigoo	Type:	glue stick
Our item no:	DAR02392	Volume:	250 ml

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

€18.25

€14.84 Excl. 23% VAT

EU warehouse

Magigoo Supergrip

Zoom in

Description Ensures strong first-layer adhesion to the print bed and prevents warping on materials like PP, PA, and PC. Easy to apply and remove after printing. Works on glass, PEI, and metal beds.

Specifications

Brand:	Magigoo	Quantity:	1
Download MSDS:	Download	Type:	glue stick
Our item no:	DAR02394	Volume:	50 ml

€24.50

€19.92 Excl. 23% VAT

EU warehouse

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Amount:	0.1 kg	Filament diameter:	1.75 mm
Brand:	123-3D	Nozzle temp range:	210 - 225 °C
Colour:	neutral	Our item no:	DFR00000

€10.25

€8.33 Excl. 23% VAT

In stock

123-3D Filament Spool Holder

Zoom in

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications