1.75mm PLA metal

colorFabb bronze Bronzefill filament 1.75mm, 0.75kg

Description This special bronze PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Bronzefill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 0.75kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Bronzefill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	bronze	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13149
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€51.50

€41.87 Excl. 23% VAT

EU warehouse

colorFabb bronze Bronzefill filament 1.75mm, 1.5kg

Zoom in

Description This special bronze PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Bronzefill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 1.5kg. The recommended print temperature is 195°C to 220°C and the print speed is 40mm/s to 100mm/s.

Specifications

Amount:	1.5 kg	Material:	Bronzefill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	bronze	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13148
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	160 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb copper Copperfill filament 1.75mm, 0.75kg

Zoom in

Description This special copper PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Copperfill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 0.75kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	0.75 kg	Material:	Copperfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	copper	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13153
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

Amount:

Filament diameter:

Order now, we can ship this today!

€51.50

€41.87 Excl. 23% VAT

In stock

colorFabb copper Copperfill filament 1.75mm, 1.5kg

Zoom in

Description This special copper PLA/PHA filament from colorFabb consists of small metal particles. It is suitable for FDM and FFF printers. With Copperfill filament you can create beautiful objects that are up to four times heavier than standard PLA. Let your prints shine and polish them after the printing process. The filament has a diameter of 1.75mm and weighs 1.5kg. The recommended print temperature is 195 to 220°C and the print speed is 40 to 100mm/s.

Specifications

Amount:	1.5 kg	Material:	Copperfill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	copper	Nozzle temp range:	195 - 220 °C
Filament diameter:	1.75 mm	Our item no:	DFP13152
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	160 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€87.75

€71.34 Excl. 23% VAT

EU warehouse

colorFabb steel Steelfill filament 1.75mm, 0.75kg

Zoom in

Description Give prints a robust, metal look with Steelfill colorFabb filament. Once the object has been printed, then you can polish and sand it. This makes it almost as if your 3D print came out of a metal workshop! This filament has a diameter of 1.75mm and a weight of 0.75kg. We recommend a print temperature of 190 to 210°C and a print speed of 40 to 80mm/s.

Note: We recommend using a hardened steel nozzle for this filament.

Specifications

Amount:	0.75 kg	Material:	SteelFill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	steel	Nozzle temp range:	190 - 210 °C
Filament diameter:	1.75 mm	Our item no:	DFP13161
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	80 m	Spool width:	5.5 cm

Amount:

Filament diameter:

€51.50

€41.87 Excl. 23% VAT

EU warehouse

colorFabb steel Steelfill filament 1.75mm, 1.5kg

Zoom in

Description Give prints a robust, metal look with Steelfil colorFabb filament. Once the object has been printed then you can polish and sand it. This makes it almost as if your 3D print came out of a metal workshop! This filament has a diameter of 1.75mm and a weight of 1.5kg. We recommend a print temperature of 190 to 210°C and a print speed of 40 to 80mm/s.

Note: We recommend using a hardened steel nozzle for this filament.

Specifications

Amount:	1.5 kg	Material:	SteelFill
Brand:	colorFabb	Max deviation:	+mn ± 0.05 mm
Colour:	steel	Nozzle temp range:	190 - 210 °C
Filament diameter:	1.75 mm	Our item no:	DFP13160
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Length:	160 m	Spool width:	5.5 cm

Amount:

0.75 kg

1.5 kg

€87.75

€71.34 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Magigoo 3D Glide Kit

Zoom in

Description With the Magigoo Glide Kit, you can apply an even layer of adhesive to your print bed in a single motion. Ideal for large surfaces and frequent use.

Specifications

Brand:	Magigoo	Type:	glue stick
Our item no:	DAR02392	Volume:	250 ml

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

€18.25

€14.84 Excl. 23% VAT

EU warehouse

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Amount:	0.1 kg	Filament diameter:	1.75 mm
Brand:	123-3D	Nozzle temp range:	210 - 225 °C
Colour:	neutral	Our item no:	DFR00000

Order now, we can ship this today!

€10.25

€8.33 Excl. 23% VAT

In stock

123-3D Filament Spool Holder

Zoom in

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications