Buy 3D printers, filament, parts & tools | lowest prices

123-3D red flexible TPE filament 2.85mm, 0.5kg

Description The red TPE flexible filament from 123-3D.ie has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	123-3D	Nozzle temp range:	220 - 260 °C
Colour:	red	Our item no:	DFF08008
Filament diameter:	2.85 mm	RAL colour no:	3020
Hardness:	45D	Roundness:	>95%
Heated bed temp:	0 - 95 °C	Inner diameter:	Ø 5.2 cm
Length:	70 m	Outer diameter:	Ø 20.0 cm
Material:	TPE	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

123-3D transparent flexible TPE filament 2.85mm, 0.5kg

Zoom in

Description The transparent TPE flexible filament from 123-3D.ie has the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	123-3D	Nozzle temp range:	220 - 260 °C
Colour:	neutral	Our item no:	DFF08005
Filament diameter:	2.85 mm	Roundness:	>95%
Hardness:	45D	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 95 °C	Outer diameter:	Ø 20.0 cm
Length:	70 m	Spool width:	5.5 cm
Material:	TPE

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€34.50 (coming soon)

€28.05 Excl. 23% VAT

123-3D white TPE Filament 2.85mm, 0.5kg

Zoom in

Description The white TPE flexible filaments from 123-3D.ie have the right flexibility for most FDM printers. It has a shore hardness of 45D. TPE filament is characterised by high elasticity and excellent wear resistance. However, the print speed is limited and not every extruder is suitable for this material. So first check whether your 3D printer is suitable.

Read more about printing with TPE filament here.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	123-3D	Nozzle temp range:	220 - 260 °C
Colour:	white	Our item no:	DFF08007
Filament diameter:	2.85 mm	RAL colour no:	9003
Hardness:	45D	Roundness:	>95%
Heated bed temp:	0 - 95 °C	Inner diameter:	Ø 5.2 cm
Length:	70 m	Outer diameter:	Ø 20.0 cm
Material:	TPE	Spool width:	5.5 cm

€34.50

€28.05 Excl. 23% VAT

EU warehouse

NinjaTek NinjaFlex flamingo pink TPU filament 3mm, 0.5kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	pink	Our item no:	DFF02072
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€46.50

€37.80 Excl. 23% VAT

EU warehouse

NinjaTek NinjaFlex grass green TPU filament 3mm, 0.5kg

Zoom in

Description This grass green NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble rubber. TPU filament adheres well to the heated bed and to the other print layers. It also features a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	green	Our item no:	DFF02074
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€46.50 (coming soon)

€37.80 Excl. 23% VAT

NinjaTek NinjaFlex grass TPU flexible filament 3mm, 0.75kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the (heated) bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

To be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimate maker

Specifications

Amount:	0.75 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	green	Our item no:	DFF02015
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm
Length:	94 m

This product is end of life.

NinjaTek NinjaFlex midnight black TPU filament 3mm, 0.5kg

Zoom in

Description This midnight black NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble rubber. TPU filament adheres well to the heated bed and to the other print layers. It also features a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	black	Our item no:	DFF02078
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon)

€46.75 Excl. 23% VAT

NinjaTek NinjaFlex sapphire blue TPU filament 3mm, 0.5kg

Zoom in

Description This sapphire blue NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble rubber. TPU filament adheres well to the (heated) bed and to the other print layers. It also features a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	blue	Our item no:	DFF02083
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

€46.50

€37.80 Excl. 23% VAT

EU warehouse

NinjaTek NinjaFlex snow white TPU filament 3mm, 0.75kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.75 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	white	Our item no:	DFF02011
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm
Length:	94 m

This product is end of life.

NinjaTek NinjaFlex snow TPU flexible filament 3mm, 1kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	1 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	white	Our item no:	DFF02086
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€69.50 (coming soon)

€56.50 Excl. 23% VAT

NinjaTek NinjaFlex sun TPU flexible filament 3mm, 0.5kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	yellow	Our item no:	DFF02092
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€46.50 (coming soon)

€37.80 Excl. 23% VAT

NinjaTek NinjaFlex sun yellow TPU filament 3mm, 0.75kg

Zoom in

Description This sun yellow NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the (heated) bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.75 kg	Material:	TPU 85A
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	yellow	Our item no:	DFF02013
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm
Length:	94 m

€57.50

€46.75 Excl. 23% VAT

EU warehouse

NinjaTek NinjaFlex water TPU flexible filament 3mm, 0.5kg

Zoom in

Description This NinjaFlex TPU 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPU filament adheres well to the heated bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPU can print objects in any shape. In addition, Ninja Flex filament complies with REACH and RoHS 2002/95/EC.

In order to be able to print high-quality TPU objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Material:	TPU 85A
Brand:	NinjaTek	Nozzle temp range:	220 - 230 °C
Colour:	neutral	Our item no:	DFF02095
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	NINJAFLEX	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 50 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€46.50 (coming soon)

€37.80 Excl. 23% VAT

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

Order now, we can ship this on Monday!

€18.25

€14.84 Excl. 23% VAT

In stock

Magigoo Supergrip

Zoom in

1
0

Description Ensures strong first-layer adhesion to the print bed and prevents warping on materials like PP, PA, and PC. Easy to apply and remove after printing. Works on glass, PEI, and metal beds.

Specifications

Brand:	Magigoo	Type:	glue stick
Quantity:	1	Volume:	50 ml

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Magigoo 3D Glide Kit

Zoom in

1
0

Description With the Magigoo Glide Kit, you can apply an even layer of adhesive to your print bed in a single motion. Ideal for large surfaces and frequent use.

Specifications

Brand:	Magigoo	Volume:	250 ml
Type:	glue stick

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Magigoo Pro Flex glue stick for flexible filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with flexible filament. Flexible filament is generally more difficult to adhere to a print bed. This adhesive stick offers the solution and ensures perfect adhesion of objects printed with flexible filament. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! The package contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00212	Volume:	50 ml
Type:	glue stick

€24.75

€20.12 Excl. 23% VAT

EU warehouse

BASF Ultrafuse blue TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The blue Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00211
Colour:	blue	RAL colour no:	5002
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse yellow TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00212
Colour:	yellow	RAL colour no:	1003
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse green TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This green Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00213
Colour:	green	RAL colour no:	6018
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse neutral TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The neutral colour Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Material:	TPC 45D
Brand:	BASF	Nozzle temp range:	230 - 250 °C
Colour:	neutral	Our item no:	DFB00214
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse orange TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This orange Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00215
Colour:	orange	RAL colour no:	2008
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg

Zoom in

Description The red Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00216
Colour:	red	RAL colour no:	3020
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Material:	TPC 45D
Brand:	BASF	Nozzle temp range:	230 - 250 °C
Colour:	pink	Our item no:	DFB00217
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00218
Colour:	silver	RAL colour no:	9006
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00219
Colour:	black	RAL colour no:	9005
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon)

€23.17 Excl. 23% VAT

BASF Ultrafuse transparent TPU 85A filament 2.85mm, 0.75kg

Zoom in

Description This transparent BASF Ultrafuse filament with a diameter of 2.85mm consists of high-quality TPU. Thanks to the shore hardness of 85A, this material is very strong and wear-resistant. Other advantages of the BASF Ultrafuse 85A filament are: high tensile strength, excellent damping, flexibility at low temperatures and high resistance to grease, oxygen and ozone.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 40°C.

Specifications

Amount:	0.75 kg	Material:	TPU 85A
Brand:	BASF	Nozzle temp range:	200 - 220 °C
Colour:	transparent	Our item no:	DFB00223
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Hardness:	NINJAFLEX	Spool width:	5.2 cm
Heated bed temp:	40 °C

€53.50

€43.50 Excl. 23% VAT

EU warehouse

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 0.5kg

Zoom in

Description This snow white NinjaTek Chinchilla NT filament is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 0.5kg roll contains 2.85mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	225 - 235 °C
Colour:	snow white	Our item no:	DFF02102
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	75A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 40 °C	Spool width:	5.5 cm

Order now, we can ship this on Monday!

€57.50

€46.75 Excl. 23% VAT

In stock

NinjaTek Chinchilla NT midnight black TPE filament 2.85mm, 0.5kg

Zoom in

Description This midnight black NinjaTek Chinchilla NT is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 0.5kg roll contains 12.85mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Amount:	0.5 kg	Material:	TPU
Brand:	NinjaTek	Nozzle temp range:	225 - 235 °C
Colour:	metallic midnight black	Our item no:	DFF02106
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Hardness:	75A	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 40 °C	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon)

€46.75 Excl. 23% VAT

REAL blue TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description This blue 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimum print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30 to 40mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	225 - 245 °C
Colour:	blue	Our item no:	DFF03015
Filament diameter:	2.85 mm	Roundness:	>95%
Hardness:	98A	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	TPU	Spool width:	4.5 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

REAL neutral TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description This neutral (milky/white) 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimal print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30 to 40 mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	225 - 245 °C
Colour:	neutral	Our item no:	DFF03019
Filament diameter:	2.85 mm	Roundness:	>95%
Hardness:	98A	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	TPU	Spool width:	4.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

REAL red TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description With this strong and flexible red TPU filament (2.85mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Nozzle temp range:	225 - 245 °C
Brand:	REAL	Our item no:	DFF03023
Colour:	red	RAL colour no:	3020
Filament diameter:	2.85 mm	Roundness:	>95%
Hardness:	98A	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	TPU	Spool width:	4.5 cm
Max deviation:	+mn ± 0.10 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

REAL white TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description With this strong and flexible, white TPU filament (2.85mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Nozzle temp range:	225 - 245 °C
Brand:	REAL	Our item no:	DFF03027
Colour:	white	RAL colour no:	9003
Filament diameter:	2.85 mm	Roundness:	>95%
Hardness:	98A	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	TPU	Spool width:	4.5 cm
Max deviation:	+mn ± 0.10 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

TPU pellets, 1kg (123-3D brand)

Zoom in

Description Make your own flexible filament with these TPU pellets from 123-3D!

With this high-quality transparent granulate you can now get started and determine the colour for your own unique filament. TPU is a flexible and rubber-like material, which gives it excellent resistance to high tensile forces. It has a print temperature of 200°C - 210°C. Ideal for non-slip objects or phone cases.

NOTE: The pellets should be dried before use for optimal quality.

Specifications

Amount:	1 kg	Material:	TPU
Brand:	123-3D	Our item no:	DPL00007
Colour:	neutral

Order now, we can ship this on Monday!

€19.50

€15.85 Excl. 23% VAT

In stock

Polymaker PolyFlex clear TPU-95A High Speed filament 2.85mm, 1kg

Zoom in

Description The transparent Polymaker PolyFlex TPU95-HF is a high-quality and flexible filament with a diameter of 2.85mm. This durable material is resistant to high tensile force, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone cases, for example.

The ideal printing temperature is 200 to 220°C. For the best result, use a heated bed of 25 to 50°C.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 220 °C
Brand:	Polymaker	Our item no:	DFP14374
Colour:	transparent	Spool empty weight:	± 140 grams
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	6.8 cm
Material:	TPU95-HF

€53.50

€43.50 Excl. 23% VAT

EU warehouse

Quantity	Product
No products
Total: €0.00

Customer reviews

Payment options

Follow us on social media

Official dealer

2.85mm flexible

Popular products