2.85mm TPC

BASF Ultrafuse blue TPC 45D filament 2.85mm, 0.5kg

Description The blue Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00211
Colour:	blue	RAL colour no:	5002
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse yellow TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00212
Colour:	yellow	RAL colour no:	1003
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse green TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This green Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00213
Colour:	green	RAL colour no:	6018
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse orange TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This orange Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00215
Colour:	orange	RAL colour no:	2008
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg

Zoom in

Description The red Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00216
Colour:	red	RAL colour no:	3020
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Material:	TPC 45D
Brand:	BASF	Nozzle temp range:	230 - 250 °C
Colour:	pink	Our item no:	DFB00217
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00218
Colour:	silver	RAL colour no:	9006
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

€28.50

€23.17 Excl. 23% VAT

EU warehouse

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC filament 45D is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	BASF	Our item no:	DFB00219
Colour:	black	RAL colour no:	9005
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 30 °C	Spool width:	5.7 cm
Material:	TPC 45D

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€28.50 (coming soon)

€23.17 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

2.85mm TPC

Popular products