PLA

At 123-3D.ie you will find a selection of PLA filament, ranging in colour and effects. You can find your desired filament by searching by diameters (1.75mm and 2.85mm) or type of PLA. Order your PLA filament from 123-3D.ie for fast delivery in Ireland.

577 - 600 of 902

Polymaker Panchroma™ lime-magenta Aubergine Dual Silk PLA filament 1.75mm, 1kg

Zoom in

Description With Polymaker Panchroma Silk PLA filament, every 3D print gets a special look. The filament has the properties of PLA, making your prints strong and durable. Thanks to the two-tone effect, 3D prints have a changing colour, depending on the angle from which the print is viewed. In addition, the finish provides a glossy effect and the print layers are less visible. This product has the Aubergine (lime-magenta) colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14462
Colour:	aubergine	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Dual Silk

Colour:

aubergine

banquet gold magenta

caribbean sea blue green

chameleon yellow blue

crown gold silver

€29.50

€23.98 Excl. 23% VAT

EU warehouse

eSun milky white ePLA-Matte filament 1.75mm, 1kg

Zoom in

Description This eSun ePLA-Matte filament in the colour Milky White is an easy to print, odourless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20256
Colour:	milky white	Inner diameter:	Ø 5.1 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.4 cm
Material:	PLA-Matte

Colour:

€24.00

€19.51 Excl. 23% VAT

EU warehouse

Polymaker Panchroma™ magenta Silk PLA filament 1.75mm, 1kg

Zoom in

Description Go for a glossy effect with the Panchroma Silk PLA filament from Polymaker. The filament has the properties of PLA, making your prints strong and durable. In addition, the finish provides a glossy effect and the print layers are less visible. This product has the colour magenta, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14450
Colour:	magenta	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Silk

Colour:

€27.50

€22.36 Excl. 23% VAT

EU warehouse

Polymaker Panchroma™ magenta Translucent PLA filament 1.75mm, 1kg

Zoom in

Description Go for a unique effect with this 1.75mm Polymaker Panchroma Translucent PLA filament. By printing a thin wall, you create a beautiful translucent effect that adds depth and dimension to your print. This makes Panchroma translucent PLA filament ideal for projects where colour and translucency are important and brings your 3D print to life. Easily create the most beautiful high-quality decorations and be amazed by the refined look of this filament. This product has the colour magenta and comes on a 1kg spool.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14404
Colour:	magenta	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Translucent

Colour:

€27.50

€22.36 Excl. 23% VAT

EU warehouse

Polymaker Panchroma™ magenta Neon PLA filament 1.75mm, 1kg

Zoom in

Description Bring your colourful ideas to life with 1.75mm Polymaker Panchroma Neon PLA filament. This filament reacts to UV light, giving a radiant neon effect in the dark. This effect gives your 3D prints an extra dimension that can make your project even cooler. This makes projects made with Panchroma neon filament immediately stand out. This makes it perfect for creating artistic designs, installations or unique accessories with an extra touch. The possibilities of Panchroma neon filament are endless. This product has a Neon Magenta colour and comes on a 1kg spool.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14410
Colour:	magenta	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	PLA Neon

Colour:

€30.50

€24.80 Excl. 23% VAT

EU warehouse

eSun grey PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's grey filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 210 °C
Brand:	eSun	Our item no:	DFE20211
Colour:	grey	Inner diameter:	Ø 9.0 cm
Filament diameter:	1.75 mm	Spool width:	6.5 cm
Heated bed temp:	0 - 50 °C	Variant:	Re-fill
Material:	PLA+

Colour:

Variant:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Spectrum arctic white Premium High Speed PLA filament 1.75mm, 1kg

Zoom in

Description The arctic white Premium High Speed PLA is a filament specially designed for printing at high speeds, up to 600mm/s. The improved mechanical properties ensure that this filament performs well, even when printing at high speed. It has improved impact resistance and excellent layer adhesion. In addition, it has a high flow, cools quickly and can print details very precisely. This makes Premium High Speed PLA very suitable for both making rapid prototypes and making decorative items. The 1.75mm filament is made of 100% organic material and contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA High Speed
Brand:	Spectrum	Nozzle temp range:	190 - 250 °C
Colour:	arctic white	Our item no:	DFS10032
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€29.50

€23.98 Excl. 23% VAT

EU warehouse

ColorFabb semi-matte white High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for high-speed printing without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, making it an excellent choice for both beginners and advanced users. The product has the colour semi-matte white, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	semi matte white	Our item no:	DFP16096
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

ColorFabb traffic white High Speed PLA Pro filament 1.75mm, 1kg

Zoom in

Description This High Speed PLA Pro from ColorFabb is ideal for printing at high speed without compromising on quality. This filament is easy to use, does not warp, has good strength and high durability, which makes it an excellent choice for both beginners and advanced users. The product has a traffic white colour, is 1.75mm and comes on a spool of 1kg.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	colorFabb	Nozzle temp range:	215 - 225 °C
Colour:	traffic white	Our item no:	DFP16073
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	mm/s	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA High Speed	Spool width:	6.8 cm

Colour:

€28.50

€23.17 Excl. 23% VAT

EU warehouse

Spectrum signal white Premium High Speed PLA filament 1.75mm, 1kg

Zoom in

Description The signal white Premium High Speed PLA is a filament specially designed for printing at high speeds, up to 600mm/s. The improved mechanical properties ensure that this filament performs well, even when printing at high speed. It has improved impact resistance and excellent layer adhesion. In addition, it has a high flow, cools quickly and can print details very precisely. This makes Premium PLA High Speed very suitable for both making rapid prototypes and making decorative items. The 1.75mm filament is made of 100% organic material and contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA High Speed
Brand:	Spectrum	Nozzle temp range:	190 - 250 °C
Colour:	signal white	Our item no:	DFS10031
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€29.50

€23.98 Excl. 23% VAT

EU warehouse

eSun red PLA+ filament 1.75mm, 1kg

Zoom in

Description eSun's red PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20101
Colour:	red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	6.5 cm
Material:	PLA+	Variant:	Spool

Colour:

Filament diameter:

Variant:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun red PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's red filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20116
Colour:	red	Inner diameter:	Ø 9.0 cm
Filament diameter:	1.75 mm	Spool width:	6.5 cm
Heated bed temp:	0 - 50 °C	Variant:	Re-fill
Material:	PLA+

Colour:

Variant:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun grey ePLA-ST filament 1.75mm, 1kg

Zoom in

Description This grey eSun ePLA-ST filament has high impact resistance, stretches before breaking, is strong and can be printed very accurately. It is a strong PLA filament that has better hardness than PETG and can be printed as smoothly as PLA. This makes this filament suitable for making mechanical parts that need to be printed strongly and accurately.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 230 °C
Brand:	eSun	Our item no:	DFE20259
Colour:	grey	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePLA-ST

Colour:

black

grey

natural

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Spectrum acrtic white Premium PLA filament 1.75mm, 1kg

Zoom in

Description This 1.75mm arctic white filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA Premium
Brand:	Spectrum	Nozzle temp range:	185 - 215 °C
Colour:	arctic white	Our item no:	DFS10001
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Spectrum polar white Premium PLA filament 1.75mm, 1kg

Zoom in

Description This 1.75mm polar white filament from Spectrum has a good first layer adhesion, so your 3D prints do not come loose during printing. Premium PLA has an excellent quality, shrinks little and shows small details well. This makes it very suitable for printing prototypes, toys, miniatures and interior objects. In addition, this filament is completely biodegradable. The spool contains 1kg.

Specifications

Amount:	1 kg	Material:	PLA Premium
Brand:	Spectrum	Nozzle temp range:	185 - 215 °C
Colour:	polar white	Our item no:	DFS10020
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun blue PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's blue filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20115
Colour:	blue	Inner diameter:	Ø 9.0 cm
Filament diameter:	1.75 mm	Spool width:	6.5 cm
Heated bed temp:	0 - 50 °C	Variant:	Re-fill
Material:	PLA+

Colour:

Variant:

€24.50

€19.92 Excl. 23% VAT

EU warehouse

eSun dark blue PLA+ filament 1.75mm, 1kg

Zoom in

Description The dark blue PLA+ filament from eSun is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20274
Colour:	dark blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA+	Variant:	Spool

Colour:

€27.50

€22.36 Excl. 23% VAT

EU warehouse

Polymaker PolyMax white PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright white colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190 to 230°C. For best results, use a heated bed of 25 to 60°C.

Read more about printing with PLA filament here.

Specifications

Amount:	0.75 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP14118
Colour:	white	Spool empty weight:	± 125 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	40-60 mm/s	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Material:	PLA

Amount:

Colour:

Filament diameter:

€47.50

€38.62 Excl. 23% VAT

EU warehouse

eSun eSilk red PLA filament 1.75mm, 1kg

Zoom in

Description eSun's red eSilk PLA filament has a glossy and silky-gloss texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	eSun	Our item no:	DFE20202
Colour:	red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	eSilk PLA

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

eSun eSilk hyacinth red PLA filament 1.75mm, 1kg

Zoom in

Description eSun's hyacinth red eSilk PLA filament has a glossy and satin texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	eSun	Our item no:	DFE20198
Colour:	red	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	eSilk PLA

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

eSun light blue PLA+ filament 1.75mm, 1kg

Zoom in

Description eSun's light blue PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	eSun	Our item no:	DFE20097
Colour:	light blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	6.5 cm
Material:	PLA+	Variant:	Spool

Colour:

€25.50

€20.73 Excl. 23% VAT

EU warehouse

eSun eSilk blue PLA filament 1.75mm, 1kg

Zoom in

Description eSun's blue eSilk PLA filament has a glossy and silky-gloss texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 220 °C
Brand:	eSun	Our item no:	DFE20192
Colour:	blue	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	eSilk PLA

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

BASF Ultrafuse black PLA filament 1.75mm, 2.5kg

Zoom in

Description This BASF PLA filament (1.75mm) is black and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	2.5 kg	Nozzle temp range:	210 - 220 °C
Brand:	BASF	Our item no:	DFB00128
Colour:	black	RAL colour no:	9005
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Filament print speed:	-	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0 - 60 °C	Spool width:	10.2 cm
Material:	PLA

Amount:

Colour:

Filament diameter:

€78.50

€63.82 Excl. 23% VAT

EU warehouse

BASF Ultrafuse black PLA filament 1.75mm, 4.5kg

Zoom in

Description This BASF PLA filament (1.75mm) is black and suitable for 3D printing all kinds of creative designs. TThe perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Amount:	4.5 kg	Nozzle temp range:	210 - 220 °C
Brand:	BASF	Our item no:	DFB00132
Colour:	black	RAL colour no:	9005
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Filament print speed:	-	Outer diameter:	Ø 35.0 cm
Heated bed temp:	0 - 60 °C	Spool width:	10.0 cm
Material:	PLA

Amount:

Colour:

Filament diameter:

€137.00

€111.38 Excl. 23% VAT

EU warehouse

Buying PLA filament for your 3D printer? Order online at 123-3D.ie!

With PLA filament for your 3D printers, you can easily print all kinds of 3D objects. In addition to standard PLA filament with a diameter of 1.75mm or 2.85/3mm in many colours, you can also choose PLA with special effects, such as glow in the dark or fluorine. There is also PLA filament with wood or metal particles. With this, your 3D-printed objects don't look like they're made of plastic, but have the appearance of a different material. This expands the possibilities of your 3D printer even more!

When ordering PLA filament, pay close attention to the diameter of the filament. PLA filament is a very easy filament type to print with and has few requirements. For example, a heated bed is optional, so you can also 3D print with PLA without a heated bed.

Read more information on PLA filament here.

Do you have any questions about ordering from 123-3D.ie? Check out our Frequently Asked Questions page! Some questions are already answered here.

Quantity	Product
No products
Total: €0.00

PLA

Buying PLA filament for your 3D printer? Order online at 123-3D.ie!

Popular products