Home
PLA
1.75mm PLA Carbon Fiber

1.75mm PLA Carbon Fiber

Polymaker PolyLite black PLA-CF filament 1.75mm, 1kg

Description Easily create strong prints with PolyLite PLA-CF from Polymaker. This is a PLA filament that is reinforced with carbon fibers, giving it a matte appearance. Thanks to the 8% carbon fiber you create lighter and stronger parts in a shorter time. The recommended print temperature is between 190°C and 230°C and this material must be printed with a heated bed.

Please note: you need a wear-resistant/hardened nozzle to print with this filament.

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP14321
Colour:	black	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	30 - 70 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA-CF	Spool width:	6.8 cm

Order now, we can ship this on Monday!

€37.50

€30.49 Excl. 23% VAT

In stock

eSun ePLA-GF natural filament 1.75mm, 1kg

Zoom in

Description Create impact-resistant 3D prints with eSun ePLA GF. This is a PLA filament to which glass fibre particles have been added, which makes the filament more impact-resistant and still easy to print. This makes this filament suitable for, among other things, printing prototypes for mechanical parts that require high stiffness and impact resistance. This filament has a neutral colour, a diameter of 1.75mm and comes on a spool of 1kg.

Please note: eSun ePLA GF is not easy to bend and this should therefore be prevented as much as possible. In addition, it is recommended to work with a hardened steel or ruby nozzle and a hardened steel extruder.

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 230 °C
Brand:	eSun	Our item no:	DFE20224
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA

Order now, we can ship this on Monday!

€32.50

€26.42 Excl. 23% VAT

In stock

Spectrum black PLA Carbon filament 1.75mm, 0.5kg

Zoom in

Description Spectrum's PLA Carbon filament is a PLA filament that is reinforced with carbon fibres. This makes the filament stiffer and has a higher tensile strength, while it still shrinks little and stays in place on the printed circuit board. Thanks to the 10% added carbon fibres, your 3D prints will have a matte appearance. This is a 1.75mm black filament on a 0.5kg spool.

Please note: We recommend using this filament with a hardened steel nozzle or ruby nozzle larger than 0.6mm.

Specifications

Amount:	0.5 kg	Material:	PLA Carbon
Brand:	Spectrum	Nozzle temp range:	190 - 220 °C
Colour:	black	Our item no:	DFS10062
Download SDS:	Download	Spool empty weight:	± 220 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	5.5 cm
Heated bed temp:	0 - 45 °C

Amount:

0.5 kg

1 kg

Order now, we can ship this on Monday!

€35.50

€28.86 Excl. 23% VAT

In stock

Spectrum black PLA Carbon filament 1.75mm, 1kg

Zoom in

Description Spectrum's PLA Carbon filament is a PLA filament that is reinforced with carbon fibres. This makes the filament stiffer and has a higher tensile strength, while it still shrinks little and stays in place on the printed circuit board. Thanks to the 10% added carbon fibres, your 3D prints will have a matte appearance. This is a 1.75mm black filament on a 1kg spool.

Please note: We recommend using this filament with a hardened steel nozzle or ruby nozzle larger than 0.6mm.

Specifications

Amount:	1 kg	Material:	PLA Carbon
Brand:	Spectrum	Nozzle temp range:	190 - 220 °C
Colour:	black	Our item no:	DFS10063
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	0 - 45 °C

Amount:

0.5 kg

1 kg

€65.50

€53.25 Excl. 23% VAT

EU warehouse

Spectrum Carbon filament set 1.75mm, 0.25kg (5-pack)

Zoom in

Description This 5-pack of Spectrum Carbon contains 5 x 0.25kg filament. This allows you to use multiple colours for your 3D prints at a low cost. In this pack you will find the following filaments:

PLA Carbon
PET-G Carbon
ASA-X CF10
PCTG CF10
PA6 LW CF15S

Specifications

Amount:	1.25 kg	Material:	Multimaterial
Brand:	Spectrum	Our item no:	DFS10135
Colour:	black	Spool empty weight:	± 120 grams
Download SDS:	Download	Inner diameter:	Ø 4.4 cm
Download TDS:	Download	Outer diameter:	Ø 14.0 cm
Filament diameter:	1.75 mm	Spool width:	5.2 cm

€86.90

€70.65 Excl. 23% VAT

EU warehouse

123-3D black PLA CF10 filament 1.75mm, 1kg

Zoom in

Description 123-3D version 1.75mm PLA CF10 filament has 10% added carbon fibres. This helsp retains its stiffness, hardness and tensile strength, with minimal shrinkage and excellent adherence. In addition, these fibres give the 3D prints a matte appearance.

Key Features:

Retains greater stiffness and hardness than normal PLA
No shrinkage after cooling
Wear-resistant and higher compression resistance
Surface has a matte appearance

Applications: Ideal for making objects that need to be stiff and hard, decorative designs and prototypes.

Tip: It is recommended to use stainless steel nozzles with a diameter larger than 0.4mm to prevent the nozzle from wearing out quickly.

Specifications

Amount:	1 kg	Nozzle temp range:	195 - 225 °C
Brand:	123-3D	Our item no:	DHM00112
Colour:	black	Roundness:	>95%
Density:	1.3	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA CF10	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Order now, we can ship this on Monday!

€32.50

€26.42 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

1.75mm PLA Carbon Fiber

Popular products