Home
PLA
1.75mm LW-PLA

1.75mm LW-PLA

colorFabb yellow LW-PLA filament 1.75mm, 0.75kg

Description This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	yellow	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13193
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour grey-silver has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	grey/silver	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13020
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb green LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	green	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13191
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb natural LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour natural has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13022
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb red LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour red has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	red	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13024
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

€34.50

€28.05 Excl. 23% VAT

EU warehouse

colorFabb black LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This black LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Amount:	0.75 kg	Material:	LW-PLA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13018
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Colour:

Filament diameter:

Order now, we can ship this tomorrow!

€34.50

€28.05 Excl. 23% VAT

In stock

colorFabb dark grey LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75mm and has a dark grey colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13251
Colour:	dark grey	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

€44.50

€36.18 Excl. 23% VAT

EU warehouse

colorFabb olive green LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut and tear. This filament has a diameter of 1.75mm and has an olive green colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13249
Colour:	olive green	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

€44.50

€36.18 Excl. 23% VAT

EU warehouse

colorFabb white LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description The colorFabb LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC airplanes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75mm and is white in colour.

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13245
Colour:	white	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

black

dark grey

olive green

€44.50

€36.18 Excl. 23% VAT

EU warehouse

colorFabb black LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Specifications

Amount:	0.75 kg	Nozzle temp range:	195 - 240 °C
Brand:	colorFabb	Our item no:	DFP13247
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50 - 60 °C	Spool width:	5.5 cm
Material:	LW-PLA-HT

Colour:

Filament diameter:

€44.50

€36.18 Excl. 23% VAT

EU warehouse

eSun black ePLA-LW filament 1.75mm, 1kg

Zoom in

Description eSun ePLA-LW Black is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.

The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers.

Density from 0.54 grams per cm3
Foaming volume ratio of 220%
Manually adjust the strength and foaming ratio
Matte surface
Good adhesion between layers
Easy to dye
Easy to print

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 270 °C
Brand:	eSun	Our item no:	DFE20226
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	PLA Light weight

Colour:

black

white

€38.00

€30.89 Excl. 23% VAT

EU warehouse

eSun natural ePLA-LW filament 1.75mm, 1kg

Zoom in

Description eSun ePLA-LW Natural is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.

The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers.

Density from 0.54 grams per cm3
Foaming volume ratio of 220%
Manually adjust the strength and foaming ratio
Matte surface
Good adhesion between layers
Easy to dye
Easy to print

Specifications

Amount:	1 kg	Nozzle temp range:	190 - 270 °C
Brand:	eSun	Our item no:	DFE20225
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePLA-LW

Colour:

black

white

€38.00

€30.89 Excl. 23% VAT

EU warehouse

Polymaker Polylite black LW-PLA filament 1.75mm, 0.8kg

Zoom in

Description The Polymaker PolyLite LW‑PLA filament black is an innovative lightweight PLA filament that allows you to create strong yet significantly lighter 3D prints. Thanks to its pre-foamed structure, the filament is up to 30% lighter than standard PLA, without having to adjust print settings. The filament is easy to print, has a matte finish, and is ideal for applications where weight and appearance are important.

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP16150
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	LW-PLA

Colour:

€38.50

€31.30 Excl. 23% VAT

EU warehouse

Polymaker Polylite grey LW-PLA filament 1.75mm, 0.8kg

Zoom in

Description The Polymaker PolyLite LW‑PLA filament gray is an innovative lightweight PLA filament that allows you to create strong yet significantly lighter 3D prints. Thanks to its pre-foamed structure, the filament is up to 30% lighter than standard PLA, without having to adjust print settings. The filament is easy to print, has a matte finish, and is ideal for applications where weight and appearance are important.

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP16151
Colour:	grey	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	LW-PLA

Colour:

€38.50

€31.30 Excl. 23% VAT

EU warehouse

Polymaker Polylite wood LW-PLA filament 1.75mm, 0.8kg

Zoom in

Description The Polymaker PolyLite LW‑PLA filament wood color is an innovative lightweight PLA filament that allows you to create strong yet significantly lighter 3D prints. Thanks to its pre-foamed structure, the filament is up to 30% lighter than standard PLA, without having to adjust print settings. The filament is easy to print, has a matte finish, and is ideal for applications where weight and appearance are important.

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP16152
Colour:	brown	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	LW-PLA

Colour:

€38.50

€31.30 Excl. 23% VAT

EU warehouse

Polymaker Polylite white LW-PLA filament 1.75mm, 0.8kg

Zoom in

Description The Polymaker PolyLite LW‑PLA filament white is an innovative lightweight PLA filament that allows you to create strong yet significantly lighter 3D prints. Thanks to its pre-foamed structure, the filament is up to 30% lighter than standard PLA, without having to adjust print settings. The filament is easy to print, has a matte finish, and is ideal for applications where weight and appearance are important.

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 230 °C
Brand:	Polymaker	Our item no:	DFP16153
Colour:	white	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	6.8 cm
Material:	LW-PLA

Colour:

€38.50

€31.30 Excl. 23% VAT

EU warehouse

123-3D grey lightweight PLA filament 1.75mm, 1kg

Zoom in

Description 123-3D version 1.75mm PLA Light Weight filament uses an innovative active foaming technology, which is activated by temperature. The filament not only offers low weight, but also precision and durability.

Key Features:

Up to 50% reduced weight
Active foaming technology
Adjustable material density
Less visible layers due to the matte finish

Applications: Ideal for making lightweight projects such as RC model airplanes.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 280 °C
Brand:	123-3D	Our item no:	DHM00085
Colour:	dark grey	RAL colour no:	7011
Density:	1.24	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA Light weight	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

Order now, we can ship this tomorrow!

€32.50

€26.42 Excl. 23% VAT

In stock

123-3D light grey lightweight PLA filament 1.75mm, 1kg

Zoom in

Up to 50% reduced weight
Active foaming technology
Adjustable material density
Less visible layers due to the matte finish

Applications: Ideal for making lightweight projects such as RC model airplanes.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 280 °C
Brand:	123-3D	Our item no:	DHM00086
Colour:	light grey	RAL colour no:	7035
Density:	1.24	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA Light weight	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

Order now, we can ship this tomorrow!

€32.50

€26.42 Excl. 23% VAT

In stock

123-3D orange lightweight PLA filament 1.75mm, 1kg

Zoom in

Up to 50% reduced weight
Active foaming technology
Adjustable material density
Less visible layers due to the matte finish

Applications: Ideal for making lightweight projects such as RC model airplanes.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 280 °C
Brand:	123-3D	Our item no:	DHM00087
Colour:	orange	Roundness:	>95%
Density:	1.24	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Light weight	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Order now, we can ship this tomorrow!

€32.50

€26.42 Excl. 23% VAT

In stock

123-3D blue lightweight PLA filament 1.75mm, 1kg

Zoom in

Up to 50% reduced weight
Active foaming technology
Adjustable material density
Less visible layers due to the matte finish

Applications: Ideal for making lightweight projects such as RC model airplanes.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 280 °C
Brand:	123-3D	Our item no:	DHM00088
Colour:	blue	Roundness:	>95%
Density:	1.24	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Light weight	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Order now, we can ship this tomorrow!

€32.50

€26.42 Excl. 23% VAT

In stock

123-3D red lightweight PLA filament 1.75mm, 1kg

Zoom in

Up to 50% reduced weight
Active foaming technology
Adjustable material density
Less visible layers due to the matte finish

Applications: Ideal for making lightweight projects such as RC model airplanes.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 280 °C
Brand:	123-3D	Our item no:	DHM00089
Colour:	red	Roundness:	>95%
Density:	1.24	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PLA Light weight	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

Colour:

Order now, we can ship this tomorrow!

€32.50

€26.42 Excl. 23% VAT

In stock

123-3D white lightweight PLA filament 1.75mm, 1kg

Zoom in

Up to 50% reduced weight
Active foaming technology
Adjustable material density
Less visible layers due to the matte finish

Applications: Ideal for making lightweight projects such as RC model airplanes.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 280 °C
Brand:	123-3D	Our item no:	DHM00090
Colour:	white	RAL colour no:	9003
Density:	1.24	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA Light weight	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm

Colour:

€32.50

€26.42 Excl. 23% VAT

EU warehouse

123-3D black lightweight PLA filament 1.75mm, 1kg

Zoom in

Up to 50% reduced weight
Active foaming technology
Adjustable material density
Less visible layers due to the matte finish

Applications: Ideal for making lightweight projects such as RC model airplanes.

Specifications

Amount:	1 kg	Nozzle temp range:	200 - 280 °C
Brand:	123-3D	Our item no:	DHM00091
Colour:	black	RAL colour no:	9017
Density:	1.24	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 216 grams
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.2 cm
Material:	PLA Light weight	Outer diameter:	Ø 20.0 cm
Max deviation:	+mn ± 0.05 mm	Spool width:	6.8 cm