Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

E3D v6 The Kraken water cooled extruder set

Description Upgrade your 3D printer with The Kraken, a complete extruder set with multiple nozzles.

Ideal for use in a heated chamber, this compact, water-cooled extruder is made entirely of metal. The Kraken comes with 4 nozzles, which can all print separately at a different temperature and with a different color in one and the same 3D print. In addition, each nozzle can be individually adjusted in height and adjusted proportionally to the print bed.

This set is suitable for filament with a diameter of 1.75mm and is supplied with 4 nozzles of 0.4mm as standard. You also do not need a fan for this design, simple passive cooling is sufficient!

The Kraken set consists of:

one 40mm x 35mm hot end
four nozzles of 0.4mm
four heating elements
four thermistors
four V5 heating blocks
four connector cables
one water pump
tubes, nuts, etc.

PLEASE NOTE: This set is especially suitable for advanced users and does not contain a water reservoir. You must make these yourself.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00246
Material:	Metal

€199.50 (Incl. 23% VAT)
(€162.20 Excl. 23% VAT)

EU warehouse

E3D Hemera titanium heatbreak, 1.75mm

Zoom in

Description Upgrade your 3D printer and increase the printing temperature of your extruder with the Hemera Titanium heatbreak from E3D.

With this high-quality titanium heatbreak, you ensure that your cold end actually remains cold. Even at the temperature required for printing with ABS or Nylon filament. Suitable for filament with a diameter of 1.75mm and with M4 thread on the attachment side of the cold end. The side of the hot end is equipped with M6 screw thread making it compatible with the V6, Volcano and Super Volcano heater blocks.

NOTE: This heatbreak is supplied without conductive paste.

Specifications

Brand:	E3D	Our item no:	DED00248
Filament diameter:	1.75 mm

€26.00 (Incl. 23% VAT)
(€21.14 Excl. 23% VAT)

EU warehouse

E3D Lite V6 Heatsink, 1.75mm

Zoom in

Description This original Lite V6 heatsink from E3D can be used in combination with the V6 hotend and comes without PTFE tube. Suitable for 1.7mm filament. This heatsink can be used in a Bowden or a direct drive setup.

Specifications

Brand:	E3D	Our item no:	DED00249
Filament diameter:	1.75 mm

€15.00 (Incl. 23% VAT)
(€12.20 Excl. 23% VAT)

EU warehouse

E3D v6 upgrade kit heaterblock & silicone sock

Zoom in

Description This v6 aluminum heater block kit allows you to upgrade an old style clamp mount block for use with cartridge thermistors. Supplied with an M3 set screw for the thermistor cartridge and an M3 button head screw to clamp the heater cartridge.

This kit includes;

1 x V6 aluminum heater block
1 x V6 Standard Sock
1 x Thermistor Cartridge
1 x thermistor extension cable
1 x V6 mounting kit

Specifications

Brand:	E3D	Our item no:	DED00250
Max temp:	285 °C

Order now, we can ship this today!

€24.50 (Incl. 23% VAT)
(€19.92 Excl. 23% VAT)

in stock

E3D nylon tubing for water-cooling kit, 1m

Zoom in

Description The Nylon tube set from E3D is mainly developed for use in water cooling systems. The tube is 100cm long and has an inner diameter of 2mm and an outer diameter of 4mm.

Specifications

Brand:

E3D

Our item no:

DED00253

Order now, we can ship this today!

€6.75 (Incl. 23% VAT)
(€5.49 Excl. 23% VAT)

in stock

E3D Prusa V6 MK2 HotEnd kit 12V

Zoom in

Description The E3D Prusa V6 mk2 is a 12 volt Prusa compatible hot end. Thanks in part to the 40W heater cartridge, the V6 hot end is able to print at temperatures up to 300ᵒC. The kit includes a 40W 12 volt heater and thermistor cartridge, an aluminum V6 heater block, an aluminum heatbrake and a collet with collet clip.

Specifications

Brand:	E3D	Power rating:	40 W
Filament diameter:	1.75 mm	Our item no:	DED00254
Max temp:	300 °C	Voltage:	12 v
Nozzle diameter:	0.4 mm

€81.00 (Incl. 23% VAT)
(€65.85 Excl. 23% VAT)

EU warehouse

E3D Prusa V6 MK3 HotEnd kit 24V

Zoom in

Description The E3D Prusa V6 mk3 is a 24 volt Prusa compatible hot end. Thanks to the 40W heater cartridge, the V6 hot end is able to print at temperatures up to 300ᵒC. The kit includes a 40W 24 Volt heater and thermistor cartridge, an aluminum heater block, aluminum heatbrake and a collet with collet clip.

Specifications

Brand:	E3D	Power rating:	40 W
Filament diameter:	1.75 mm	Our item no:	DED00255
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	0.4 mm

€81.00 (Incl. 23% VAT)
(€65.85 Excl. 23% VAT)

EU warehouse

E3D MK2/MK3 Prusa Specific heatbreak

Zoom in

Description The E3D Prusa Heatbreak is intended for Prusa V6 printers to improve retraction when using multiple materials in the printer. The Heatbreak is compatible with MK2 & MK3 heating blocks.

Specifications

Brand:

E3D

Our item no:

DED00256

€21.00 (Incl. 23% VAT)
(€17.07 Excl. 23% VAT)

EU warehouse

E3D Prusa MK3 specific heater cartridge | 24V, 40W

Zoom in

Description The E3D Prusa Specific Heater Cartridge is a 24v 40W heating element that is compatible with the Prusa MK3, MK3S and V6 Hot end set. The maximum temperature that can be reached is 285 celcius and installation is easy by simply sliding the heating element into the heating block and screwing it on.

Specifications

Brand:	E3D	Our item no:	DED00257
Power rating:	40 W	Voltage:	24 v

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€14.00 (coming soon) (Incl. 23% VAT)
(€11.38 Excl. 23% VAT)

E3D Prusa MK2/MK3 specific thermistor

Zoom in

Description The E3D Prusa specific thermistor has a maximum temperature of 300 Celsius and is equipped with a molex microfit 3.0 connector. The cartridge comes with a 1m long connection cable. The thermistor has a diameter of 3mm and a length of 15mm.

Specifications

Brand:	E3D	Our item no:	DED00258
Max temp:	300 °C

Order now, we can ship this today!

€10.00 (Incl. 23% VAT)
(€8.13 Excl. 23% VAT)

in stock

E3D heater cartridge | 12V, 40W

Zoom in

Description With this original E3D 12V heating element (ceramic) you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00259
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	20 mm

Order now, we can ship this today!

€15.00 (Incl. 23% VAT)
(€12.20 Excl. 23% VAT)

in stock

E3D heater cartridge | 24V, 40W

Zoom in

Description With this original E3D 24V heating element (ceramic) you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00260
Cartridge diameter:	6 mm	Voltage:	24 v
Cartridge length:	20 mm

Order now, we can ship this today!

€14.00 (Incl. 23% VAT)
(€11.38 Excl. 23% VAT)

in stock

E3D high precision ceramic heater cartridge | 12V, 40W

Zoom in

Description This E3D high precision heater cartridge of 12 volts/40 watts is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm, making it compatible with many hotends. The heater cartridge is equipped with a molex microfit 3.0 connector and has a total cable length of 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00261
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	20 mm

€24.75 (Incl. 23% VAT)
(€20.12 Excl. 23% VAT)

EU warehouse

E3D high precision ceramic heater cartridge | 24V, 40W

Zoom in

Description This E3D high precision heater cartridge of 24 volts/40 watts is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm, making it compatible with many hotends. The heater cartridge is equipped with a molex microfit 3.0 connector and has a total cable length of 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00262
Cartridge diameter:	6 mm	Voltage:	24 v
Cartridge length:	20 mm

€24.75 (Incl. 23% VAT)
(€20.12 Excl. 23% VAT)

EU warehouse

E3D high temperature ceramic heater cartridge | 12V, 65W

Zoom in

Description This E3D high temperature heater cartridge of 12 volts/65 watts is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm.

The heater cartridge is capable of reaching temperatures of no less than 550°C, which means that a copper heater block is required.

In combination with the E3D copper Nozzle or E3D Nozzle X you have a hotend that is ideal for filaments such as PEEK or PEI.

Specifications

Brand:	E3D	Max operating temp:	550 °C
Cable length:	200 cm	Power rating:	65 W
Cartridge diameter:	6 mm	Our item no:	DED00263
Cartridge length:	20 mm	Voltage:	12 v

€97.50 (Incl. 23% VAT)
(€79.27 Excl. 23% VAT)

EU warehouse

E3D high temperature ceramic heater cartridge | 24V, 65W

Zoom in

Description This 24 volt/65 watt E3D high temperature heater cartridge is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm.

The heater cartridge is capable of reaching temperatures of no less than 550°C, which means that a copper heater block is required.

In combination with the E3D copper Nozzle or E3D Nozzle X you have a hotend that is ideal for filaments such as PEEK or PEI.

Specifications

Brand:	E3D	Max operating temp:	550 °C
Cable length:	200 cm	Power rating:	65 W
Cartridge diameter:	6 mm	Our item no:	DED00264
Cartridge length:	20 mm	Voltage:	24 v

€97.50 (Incl. 23% VAT)
(€79.27 Excl. 23% VAT)

EU warehouse

E3D PT1000 Temperature Sensor

Zoom in

Description The E3D PT1000 Temperature sensor is a meter that can accurately detect temperatures up to 500°C. The PT1000 is also equipped with a 50mm long black cable and a Molex Microfit 3.0 connection. Additionally, the cartridge is supplied with a 1 meter extension cable.

Specifications

Brand:	E3D	Cartridge length:	15 mm
Cable length:	50 cm	Heatbed max temp:	500 °C
Cartridge diameter:	3 mm	Our item no:	DED00265

Order now, we can ship this today!

€19.50 (Incl. 23% VAT)
(€15.85 Excl. 23% VAT)

in stock

E3D Type K Thermocouple Cartridge

Zoom in

Description E3D's Type K Thermocouple Cartridge is suitable for high temperature printing (up to 500°C). The white cable has a length of 50mm.

Specifications

Brand:	E3D	Max temp:	500 °C
Cartridge diameter:	3 mm	Our item no:	DED00266
Cartridge length:	15 mm

€10.00 (Incl. 23% VAT)
(€8.13 Excl. 23% VAT)

EU warehouse

E3D ToolChanger Volcano Bowden Tool 24V, 1.75mm

Zoom in

Description The ToolChanger Volcano Bowden Tool 24V from E3D comes with a 1.75mm V6 threaded heat sink. This lightweight tool is suitable for a maximum temperature of 285°C. The kit includes a high precision heating element of 24V 30W and a thermistor temperature sensor.

Specifications

Brand:	E3D	Our item no:	DED00270
Filament diameter:	1.75 mm	Voltage:	24 v

€171.00 (Incl. 23% VAT)
(€139.02 Excl. 23% VAT)

EU warehouse

E3D ToolChanger V6 Bowden Tool 24V (1.75mm)

Zoom in

Description The ToolChanger V6 Bowden Tool 24V from E3D comes with a 1.75mm threaded V6 heatsink. This lightweight tool is suitable for a maximum temperature of 285°C. The kit includes a 24V 30W high precision heating element and a thermistor temperature sensor.

Specifications

Brand:	E3D	Our item no:	DED00271
Filament diameter:	1.75 mm	Voltage:	24 v

€163.00 (Incl. 23% VAT)
(€132.52 Excl. 23% VAT)

EU warehouse

E3D V6 water cooled Chimera+ kit | 1.75mm, 24V

Zoom in

Description The Chimera+ is a versatile hotend with two filaments and two nozzles. It is a versatile dual extrusion system that can print two different types of filament at the same time. The water-cooled Chimera+ kit is useful for heated build rooms where air cooling is not suitable, such as at ambient temperatures above 40°C. With the kit you can print materials such as PEEK at a high temperature. The Chimera+ can reach a maximum temperature of 300°C and is compatible with the E3D ecosystem.

This kit contains the following parts:

1x water-cooled HeatSink
1x Cylops+ mounting kit
1x 30x30x10mm 24V
2x V6 silicone socks
2x PTFE tube 800mm
2x brass nozzles 0.4mm 1.75mm
2x V6 Aluminum Heater Blocks
2x V6 mounting sets
2x 30W heating cartridge 24V
2x thermistor cartridge
2x thermistor extension cable
Collet clips

Specifications

Brand:	E3D	Our item no:	DED00279
Filament diameter:	1.75 mm	Voltage:	24 v

€163.00 (Incl. 23% VAT)
(€132.52 Excl. 23% VAT)

EU warehouse

E3D V6 Chimera+ kit | 1.75mm, 24V

Zoom in

Description The Chimera+ is a versatile hotend with two filaments and two nozzles. It is a versatile dual extrusion system that can print two different types of filament at the same time. The water-cooled Chimera+ kit is useful for heated build rooms where air cooling is not suitable, such as at ambient temperatures above 40°C. With the kit you can print materials such as PEEK at a high temperature. The Chimera+ can reach a maximum temperature of 300°C and is compatible with the E3D ecosystem.

This kit contains the following parts:

1x air-cooled HeatSink
1x Cylops+ mounting kit
1x 30x30x10mm 24V
2x V6 silicone socks
2x PTFE tube 800 mm
2x brass nozzles 0.4mm 1.75mm
2x V6 Aluminum Heater Blocks
2x V6 mounting sets
2x 30W heating cartridge 24V
2x thermistor cartridge
2x thermistor extension cable
Collet clips

Specifications

Brand:	E3D	Our item no:	DED00280
Filament diameter:	1.75 mm	Voltage:	24 v

€131.00 (Incl. 23% VAT)
(€106.50 Excl. 23% VAT)

EU warehouse

E3D Water Cooling barbed adapter kit

Zoom in

Description The E3D Water Cooling barbed adapter kit is used for hotend water cooling systems. The tube adapter connects Kraken tubes (8mm - 5mm) to nylon tubes (4mm - 2.5mm).

Specifications

Brand:

E3D

Our item no:

DED00281

€30.50 (Incl. 23% VAT)
(€24.80 Excl. 23% VAT)

EU warehouse

E3D Super Volcano upgrade starter kit | 12V, 1.75mm (.8mm, 1mm, 1.2mm, 1.4mm nozzle)

Zoom in

Description The E3D Super Volcano upgrade starter kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hot end is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300ᵒC. To print materials with a melting temperature above 300 Celsius, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 12V, brass nozzle 1.75mm, thermal paste and a mosfet with accompanying wiring. This starter kit comes with an extra set of nozzles. These come in the sizes 0.8mm, 1.0mm, 1.2mm, 1.4mm.

Specifications

Brand:	E3D	Our item no:	DED00282
Filament diameter:	1.75 mm	Voltage:	12 v
Power rating:	80 W

€169.00 (Incl. 23% VAT)
(€137.40 Excl. 23% VAT)

EU warehouse

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

E3D

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

E3D