24V

E3D V6 universal hot end 1.75mm (only metal parts)

Description This kit contains only the metal hot end parts and is intended for users with some experience and/or in possession of their own parts. Electronic components and the PTFE tube are not included. The kit is ideal for upgrading your 3D printer to an E3D V6 hot end. The heatsink has an integrated Bowden coupling.

The kit contains the following components:

E3D V6 aluminium heatsink 1.75mm;
E3D V6 aluminium heater block;
E3D V6 heat break 1.75mm;
E3D V6 brass nozzle 1.75mm x 0.4mm;
E3D V6 spare fasteners;

This kit can be used in both a Bowden and a direct drive setup.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00024
Max operating temp:	400 °C

€45.50

€36.99 Excl. 23% VAT

EU warehouse

E3D V6 All-Metal hotend kit | 24V Bowden, 2.85mm

Zoom in

Description This complete V6 hotend kit (24V Bowden) for your 3D printer contains all parts for the v6 hotend (2.85mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

E3D Thermistor cartridge
E3D aluminum heater block
E3D heat sink
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D silicone sock for v6 hotends (1 piece)
E3D Ceramic heating cartridge 24V
E3D v6 Bowden clutch 2.85mm
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 24V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00297
Filament diameter:	2.85 mm	Voltage:	24 v

€71.00

€57.72 Excl. 23% VAT

EU warehouse

E3D Plated Copper Volcano upgrade kit | 24V, 1.75mm

Zoom in

Description The copper-plated E3D Volcano upgrade set improves the performance of a printer's hot end. Thanks to the copper plating, the hot end can easily be heated up to 285 Celsius with an expandability of up to 500 Celsius. An additional advantage of copper plating is that the heat conductivity is three times higher than that of brass. This means that the relative retention of heat is three times greater. This ensures that there is a more constant temperature, which promotes the flow of filament.

The kit includes a copper plated heating block, mounting kit, 0.8mm copper plated 1.75 or 2.85mm nozzle, 30W standard 24v heating element, Thermistor cartridge along with an extension cable, thermal paste and a cable tie.

Specifications

Brand:	E3D	Our item no:	DED00284
Filament diameter:	1.75 mm	Voltage:	24 v
Material:	Copper

€87.00

€70.73 Excl. 23% VAT

EU warehouse

E3D Volcano hotend kit | 24V, 1.75mm (with Bowden add-on)

Zoom in

Description The Volcano hotend kit 1.75 mm 24V (with bowden add-on) from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is suitable for a maximum printing temperature of 300°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x V6 heatsink 1.75mm bowden
1x Volcano aluminum heater block
1x stainless steel heat break
1x brass Volcano nozzle
1x V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge 24V
1x extension cable
1x Collet Clamp
1x PTFE tube
1x V6 fan duct
1x 30 x 30 x 10 mm fan 24V
1x M3 set screw
1x M3 ring
1x thermal paste
1x Volcano sock
1x cable tie

Specifications

Brand:	E3D	Our item no:	DED00293
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

€75.50

€61.38 Excl. 23% VAT

EU warehouse

E3D Volcano hotend kit | 24V Direct Drive, 1.75mm

Zoom in

Description The Volcano HotEnd kit 1.75 mm 24V Direct Drive from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is suitable for a maximum printing temperature of 300°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x V6 heatsink 1.75mm direct
1x Volcano aluminum heater block
1x stainless steel heat break
1x brass Volcano nozzle
1x V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge 24V
1x extension cable
1x Collet Clamp
1x PTFE tube
1x V6 fan duct
1x 30 x 30 x 10 mm fan 24V
1x M3 set screw
1x M3 ring
1x thermal paste
1x Volcano sock
1x cable tie

Specifications

Brand:	E3D	Our item no:	DED00295
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

Order now, we can ship this today!

€71.00

€57.72 Excl. 23% VAT

In stock

E3D Volcano upgrade kit | 24V, 1.75mm

Zoom in

Description The Volcano Upgrade kit 1.75 mm 24V from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is rated for a maximum printing temperature of 285°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x universal V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge
1x extension cable
1x tie wrap
1x Volcano heater block
1x 0.8mm brass Volcano nozzle

Specifications

Brand:	E3D	Our item no:	DED00286
Max temp:	285 °C	Voltage:	24 v

€37.50

€30.49 Excl. 23% VAT

EU warehouse

E3D Prusa V6 MK3 HotEnd kit 24V

Zoom in

Description The E3D Prusa V6 mk3 is a 24 volt Prusa compatible hot end. Thanks to the 40W heater cartridge, the V6 hot end is able to print at temperatures up to 300ᵒC. The kit includes a 40W 24 Volt heater and thermistor cartridge, an aluminum heater block, aluminum heatbrake and a collet with collet clip.

Specifications

Brand:	E3D	Power rating:	40 W
Filament diameter:	1.75 mm	Our item no:	DED00255
Max temp:	300 °C	Voltage:	24 v
Nozzle diameter:	0.4 mm

€81.00

€65.85 Excl. 23% VAT

EU warehouse

E3D V6 silicone sock pro for hot ends (3-pack)

Zoom in

Description With these silicone socks you can ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, more favorable for overhangs, bridges and more accurate temperature behavior.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Brand:	E3D	Our item no:	DED00072
Colour:	blue

Order now, we can ship this today!

€6.00

€4.88 Excl. 23% VAT

In stock

Heaterblock insulation cotton

Zoom in

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hot end more stable, which in turn results in better prints.

Specifications

Brand:	123-3D	Our item no:	DVB00017
Dimensions:	75 x 21 mm	Thickness:	3 mm

Order now, we can ship this today!

€1.35

€1.10 Excl. 23% VAT

In stock

E3D V6 Chimera+ kit | 1.75mm, 24V

Zoom in

Description The Chimera+ is a versatile hotend with two filaments and two nozzles. It is a versatile dual extrusion system that can print two different types of filament at the same time. The water-cooled Chimera+ kit is useful for heated build rooms where air cooling is not suitable, such as at ambient temperatures above 40°C. With the kit you can print materials such as PEEK at a high temperature. The Chimera+ can reach a maximum temperature of 300°C and is compatible with the E3D ecosystem.

This kit contains the following parts:

1x air-cooled HeatSink
1x Cylops+ mounting kit
1x 30x30x10mm 24V
2x V6 silicone socks
2x PTFE tube 800 mm
2x brass nozzles 0.4mm 1.75mm
2x V6 Aluminum Heater Blocks
2x V6 mounting sets
2x 30W heating cartridge 24V
2x thermistor cartridge
2x thermistor extension cable
Collet clips

Specifications

Brand:	E3D	Our item no:	DED00280
Filament diameter:	1.75 mm	Voltage:	24 v

€131.00

€106.50 Excl. 23% VAT

EU warehouse

E3D V6 water cooled Chimera+ kit | 1.75mm, 24V

Zoom in

1x water-cooled HeatSink
1x Cylops+ mounting kit
1x 30x30x10mm 24V
2x V6 silicone socks
2x PTFE tube 800mm
2x brass nozzles 0.4mm 1.75mm
2x V6 Aluminum Heater Blocks
2x V6 mounting sets
2x 30W heating cartridge 24V
2x thermistor cartridge
2x thermistor extension cable
Collet clips

Specifications

Brand:	E3D	Our item no:	DED00279
Filament diameter:	1.75 mm	Voltage:	24 v

€163.00

€132.52 Excl. 23% VAT

EU warehouse

E3D v6 hot end complete kit | 24V, 1.75mm Universal (with Bowden add-on)

Zoom in

Description This complete v6 hot end complete kit - 1.75mm Universal (with Bowden add-on) (24V) from E3D for your 3D printer contains all the parts for the v6 hotend. This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

Thermistor cartridge
V6 Aluminum heater block
V6 heatsink
V6 heat break
V6 brass nozzle (0.4mm)
V6 duct
V6 silicone sock
Ceramic heating cartridge 24V
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 24V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00305
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

€71.00

€57.72 Excl. 23% VAT

EU warehouse

E3D v6 upgrade kit heaterblock & silicone sock

Zoom in

Description This v6 aluminum heater block kit allows you to upgrade an old style clamp mount block for use with cartridge thermistors. Supplied with an M3 set screw for the thermistor cartridge and an M3 button head screw to clamp the heater cartridge.

This kit includes;

1 x V6 aluminum heater block
1 x V6 Standard Sock
1 x Thermistor Cartridge
1 x thermistor extension cable
1 x V6 mounting kit

Specifications

Brand:	E3D	Our item no:	DED00250
Max temp:	285 °C

€24.50

€19.92 Excl. 23% VAT

EU warehouse

E3D v6 hot end complete kit | 24V Direct, 1.75mm Universal

Zoom in

Description This complete v6 hotend kit - 1.75mm Universal (Direct) (24V) for your 3D printer contains all the parts for the v6 hotend. This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

Thermistor cartridge
V6 Aluminum heater block
V6 heatsink
V6 heat break
V6 brass nozzle (0.4mm)
V6 duct
V6 silicone sock
Ceramic heating cartridge 24V
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 24V
Fasteners
extension cable

Specifications

Brand:	E3D	Our item no:	DED00303
Filament diameter:	1.75 mm	Voltage:	24 v
Max temp:	300 °C

€67.00

€54.47 Excl. 23% VAT

EU warehouse

Capricorn XS heat break liner, 2mm x 3mm (300mm)

Zoom in

Description The Capricorn XS heat break liner is specially made to fit perfectly in the heatbreak. The liner is also 30cm long so you can provide for 10 heat breaks.

Specifications