E3D

0.8 mm

€65.00

€52.85 Excl. 23% VAT

EU warehouse

E3D Volcano ObXidian nozzle 1.75mm, 0.80mm

Specifications

Brand:	E3D	Nozzle coating:	E3DLC
Colour:	green	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR00944
Material:	ObXidian Steel	Screwthread type:	M6

Nozzle diameter:

0.8 mm

€65.00

€52.85 Excl. 23% VAT

EU warehouse

E3D - Hemera XS Direct V6 kit (1.75mm, 12V)

Description The Hemera XS Direct kit 12 V is 92 g lighter and 11mm shorter than the classic Hemera. The modified stepper motor allows faster movement, reducing printing problems such as ghosting. Because this extruder is so compact, it takes up less space, making it perfect for smaller 3D printers. The T slot mounting system ensures that it can be easily attached, so you can get started quickly. The XS Direct extruder is designed around the E3D system, making it easier to customize to your needs. Hemera is a true unit, which means that all parts are guaranteed to work together. The XS Direct can therefore easily work with the V6, Volcano and SuperVolcano heating elements and nozzles.

Although Hemera's motor is similar to a NEMA 17, it is not standard NEMA 17. This means Hemera is not compatible with other NEMA 17 motors.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR00988
Max temp:	300 °C	Voltage:	12 v

€209.00

€169.92 Excl. 23% VAT

EU warehouse

E3D - Hemera XS Bowden Kit (1.75mm)

Description The Hemera XS Bowden V2 is 46g lighter and almost 6mm shorter than its predecessors. This extruder can effortlessly print all 3D materials, including abrasive materials. The extrusion force can control the entire E3D Ecosystem, including the Revo High Flow and the SuperVolcano. It is also compatible with the Bowdaptor, Revo Hotsides and V6 ecosystem hotsides. If clogged, the Hemera XS will pause, making it easier to resolve the problem and resume 3D printing. The specially designed mounting system makes it possible to attach many different accessories to this extrusion system. The kit comes with 100mm PTFE tube.

Specifications

Brand:	E3D	Our item no:	DAR00990
Filament diameter:	1.75 mm

€139.00

€113.01 Excl. 23% VAT

EU warehouse

E3D Hemera heatsink / cooling block (1.75mm)

Description This molded E3D Hemera heatsink is a replacement for the heatsink on the Hemera extruder.
And also suitable for the Revo Nozzles and Revo HeaterCore

This kit includes the following:

1 x Hemera 1.75mm heatsink
1 x Metal Collet Clip
1 x Bowden coupling
1 x Dowel Pin

Specifications

Brand:	E3D	Dimensions:	30 x 43 x 43 mm
Colour:	black	Our item no:	DAR01150

€45.50

€36.99 Excl. 23% VAT

EU warehouse

E3D Zodiac MK8 PRO nozzle, 1.75mm x 0.60mm

Description The E3D Zodiac MK8 PRO nozzle is designed to be even more wear-resistant than the CRB nozzles. This Pro nozzle can be used with temperatures up to 450℃. This makes it ideal for use in combination with filament that must be printed at very high temperatures. The Zodiac MK8 Pro is made of hardened tool steel and has a double-layer coating. This nozzle is 0.60mm, suitable for 1.75mm filament and is specially designed for MK8 hotends.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Dimensions:	13 mm	Nozzle type:	MK8
Material:	Hardened tool steel	Our item no:	DAR01154
Max temp:	450 °C	Screwthread type:	M6

Nozzle diameter:

€73.50

€59.76 Excl. 23% VAT

EU warehouse

E3D Zodiac MK8 PRO nozzle, 1.75mm x 0.40mm

Description The E3D Zodiac MK8 PRO nozzle is designed to be even more wear-resistant than the CRB nozzles. This Pro nozzle can be used with temperatures up to 450℃. This makes it ideal for use in combination with filament that must be printed at very high temperatures. The Zodiac MK8 Pro is made of hardened tool steel and has a double-layer coating. This nozzle is 0.40mm, suitable for 1.75mm filament and is specially designed for MK8 hotends.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	13 mm	Nozzle type:	MK8
Material:	Hardened tool steel	Our item no:	DAR01155
Max temp:	450 °C	Screwthread type:	M6

Nozzle diameter:

€73.50

€59.76 Excl. 23% VAT

EU warehouse

E3D Zodiac V6 CRB nozzle, 1.75mm x 0.60mm

Description The E3D Zodiac V6 CRB nozzle is designed to be abrasion resistant and prevent filament build-up. This means that it can be used again and again, without showing any signs of use. The filament will also stick less, so it will not clog the nozzle. CRB nozzles can be used with temperatures up to 300℃, which makes them ideal for printing with many different filaments. This nozzle is 0.60mm, suitable for 1.75mm filament and is specially designed for V6 heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Dimensions:	12.5 mm	Our item no:	DAR01157
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	300 °C

Nozzle diameter:

€47.50

€38.62 Excl. 23% VAT

EU warehouse

E3D Zodiac V6 CRB nozzle, 1.75mm x 0.40mm

Description The E3D Zodiac V6 CRB nozzle is designed to be abrasion resistant and prevent filament build-up. This means that it can be used again and again, without showing any signs of use. The filament will also stick less, so it will not clog the nozzle. CRB nozzles can be used with temperatures up to 300℃, which makes them ideal for printing with many different filaments. This nozzle is 0.40mm, suitable for 1.75mm filament and is specially designed for V6 heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	12.5 mm	Our item no:	DAR01158
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	300 °C

Nozzle diameter:

€47.50

€38.62 Excl. 23% VAT

EU warehouse

E3D Zodiac Volcano CRB nozzle, 1.75mm x 0.40mm

Description The E3D Zodiac Volcano CRB nozzle is designed to be abrasion resistant and prevent filament build-up. This means that it can be used again and again, without showing any signs of use. The filament will also stick less, so it will not clog the nozzle. CRB nozzles can be used with temperatures up to 300℃, which makes them ideal for printing with many different filaments. This nozzle is 0.40mm, suitable for 1.75mm filament and is specially designed for Volcano heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	21 mm	Our item no:	DAR01160
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	300 °C

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

E3D Zodiac Volcano CRB nozzle, 1.75mm x 0.60mm

Description The E3D Zodiac Volcano CRB nozzle is designed to be abrasion resistant and prevent filament build-up. This means that it can be used again and again, without showing any signs of use. The filament will also stick less, so it will not clog the nozzle. CRB nozzles can be used with temperatures up to 300℃, which makes them ideal for printing with many different filaments. This nozzle is 0.60mm, suitable for 1.75mm filament and is specially designed for Volcano heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Dimensions:	21 mm	Our item no:	DAR01161
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	300 °C

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

E3D Zodiac Volcano PRO nozzle, 1.75mm x 0.40mm

Description The E3D Zodiac Volcano PRO nozzle is designed to be even more wear resistant than the CRB nozzles. This Pro nozzle can be used with temperatures up to 450℃. This makes it ideal for use with filament that needs to be printed at very high temperatures. The Zodiac Volcano Pro is made from hardened tool steel and has a double layer coating. This nozzle is 0.40mm, suitable for 1.75mm filament and is specially designed for Volcano heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	21 mm	Our item no:	DAR01162
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	450 °C

Nozzle diameter:

€75.50

€61.38 Excl. 23% VAT

EU warehouse

E3D Zodiac Volcano PRO nozzle, 1.75mm x 0.60mm

Description The E3D Zodiac Volcano PRO nozzle is designed to be even more wear resistant than the CRB nozzles. This Pro nozzle can be used with temperatures up to 450℃. This makes it ideal for use with filament that needs to be printed at very high temperatures. The Zodiac Volcano Pro is made from hardened tool steel and has a double layer coating. This nozzle is 0.60mm, suitable for 1.75mm filament and is specially designed for Volcano heater blocks.

Specifications

Brand:	E3D	Nozzle coating:	zodiac bi-layer
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Dimensions:	21 mm	Our item no:	DAR01163
Material:	Hardened tool steel	Screwthread type:	M6
Max temp:	450 °C

Nozzle diameter:

€75.50

€61.38 Excl. 23% VAT

EU warehouse

E3D Revo Belt nozzle, 1.75mm x 0.40mm

Description The E3D Revo Belt nozzle 1.75mm x 0.40mm is specially designed to improve your belt printing experience. The nozzle is longer to allow printing at a 45 degree angle. Experiment freely with other Revo Belt nozzles, which can be changed by hand in just 60 seconds. These come in 3 different sizes so you always have one that fits your project perfectly. With these nozzles you can print small objects with high resolution or large prints in a short time. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion. The Revo belt nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Please note: Revo nozzles are not suitable for use with V6 heater blocks. You may also need to adjust your z-offset when you change nozzles.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	red	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	46.5 mm	Our item no:	DAR01168
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

0.8 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€39.50 (coming soon)

€32.11 Excl. 23% VAT

E3D Revo High Flow nozzle, 1.75mm x 0.40mm

Description With the E3D Revo High Flow 1.75mm x 0.40mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	red	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	0.4 mm
Dimensions:	41.1 mm	Our item no:	DAR01171
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 0.60mm

Description With the E3D Revo High Flow 1.75mm x 0.60mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	blue	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	0.6 mm
Dimensions:	41.1 mm	Our item no:	DAR01172
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 0.80mm

Description With the E3D Revo High Flow 1.75mm x 0.80mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	green	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	0.8 mm
Dimensions:	41.1 mm	Our item no:	DAR01173
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 1.00mm

Description With the E3D Revo High Flow 1.75mm x 1.00mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	black	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	1 mm
Dimensions:	41.1 mm	Our item no:	DAR01174
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 1.20mm

Description With the E3D Revo High Flow 1.75mm x 1.20mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	purple	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	1.2 mm
Dimensions:	41.1 mm	Our item no:	DAR01175
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Revo High Flow nozzle, 1.75mm x 1.40mm

Description With the E3D Revo High Flow 1.75mm x 1.40mm nozzle you can print your 3D model in a short time. The increased flow rate allows you to print faster than with standard nozzles. The Revo High Flow nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.

Unlike other E3D High Flow hotends, the Revo High Flow nozzle retains the same form factor as standard Revo hotends. This means you do not have to change anything to your current mounting and fan duct set up. The unique internal geometry provides improved heat transfer for the filament. The Revo High Flow has a range of different nozzle sizes. These can be interchanged with the standard Revo. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion.

Specifications

Brand:	E3D	Max temp:	300 °C
Colour:	orange	Nozzle coating:	none
Filament diameter:	1.75 mm	Nozzle diameter:	1.4 mm
Dimensions:	41.1 mm	Our item no:	DAR01176
Material:	Brass	Screwthread type:	Revo

Nozzle diameter:

€52.50

€42.68 Excl. 23% VAT

EU warehouse

E3D Hemera XS Bowden Coldside

Description The Hemera XS Bowden Coldside is the ideal extruder to use in combination with other E3D products such as high flow hot ends and nozzles. Because the Hemera XS is compact, it is very suitable for smaller 3D printers. Thanks to the mounting system, accessories can easily be attached to this extruder. The personalised stepper motor makes it possible to move back and forth faster, which reduces the chance of ghosting. With this extruder you can print a wide range of materials, including flexible and abrasive materials. The Hemera XS works with Revo nozzles and V6 nozzles with a Hemera heatbreak. In the event of a blockage in the nozzle, the drive mechanism of the Hemera XS will pause, so that you can quickly continue. The built-in PTC resistor offers better protection against hazards associated with high temperatures. This Hemera XS extruder is suitable for a Bowden setup.

This kit contains:
1 x Hemera XS Extruder
1 x Hemera fixings kit
1 x 40mm x 40mm x 10mm 12V or 24V fan
1 x Extension cable kit

Specifications

Brand:	E3D	Our item no:	DAR01727
Filament diameter:	1.75 mm

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€152.50 (coming soon)

€123.98 Excl. 23% VAT

E3D Hemera XS Direct Coldside, 12V

Description The Hemera XS Direct Coldside 12V is the ideal extruder to use in combination with other E3D products such as high flow hotends and nozzles. Because the Hemera XS is compact, it is very suitable for smaller 3D printers. Thanks to the mounting system, accessories can easily be attached to this extruder. The personalised stepper motor makes it possible to move back and forth faster, which reduces the chance of ghosting. With this extruder you can print a wide range of materials, including flexible and abrasive materials. The Hemera XS works with Revo nozzles and V6 nozzles with a Hemera heatbreak. In the event of a blockage in the nozzle, the drive mechanism of the Hemera XS will pause, so that you can quickly continue. The built-in PTC resistor offers better protection against hazards associated with high temperatures. This Hemera XS extruder is suitable for a direct drive setup and works with 12V.

This kit contains:
1 x Hemera XS Extruder
1 x Hemera fixings kit
1 x 40mm x 40mm x 10mm, 12V or 24V fan
1 x Extension cable kit

Specifications

Brand:	E3D	Our item no:	DAR01728
Filament diameter:	1.75 mm	Voltage:	12 v

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€147.50 (coming soon)

€119.92 Excl. 23% VAT

E3D Hemera XS Direct Coldside, 24V

Description The Hemera XS Direct Coldside 24V is the ideal extruder to use in combination with other E3D products such as high flow hotends and nozzles. Because the Hemera XS is compact, it is very suitable for smaller 3D printers. Thanks to the mounting system, accessories can easily be attached to this extruder. The personalised stepper motor makes it possible to move back and forth faster, which reduces the chance of ghosting. With this extruder you can print a wide range of materials, including flexible and abrasive materials. The Hemera XS works with Revo nozzles and V6 nozzles with a Hemera heatbreak. In the event of a blockage in the nozzle, the drive mechanism of the Hemera XS will pause, so that you can quickly continue. The built-in PTC resistor offers better protection against hazards associated with high temperatures. This Hemera XS extruder is suitable for a direct drive setup and works with 24 V.

This kit contains:
1 x Hemera XS Extruder
1 x Hemera fixings kit
1 x 40mm x 40mm x 10mm, 12V or 24V fan
1 x Extension cable kit

Specifications

Brand:	E3D	Our item no:	DAR01729
Filament diameter:	1.75 mm	Voltage:	24 v

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€147.50 (coming soon)

€119.92 Excl. 23% VAT

E3D Revo Creality Coldside kit