PVA

At 123-3D.ie you will find a selection of PVA filament, ranging in neutral tones. You can find your desired filament by searching by diameters (1.75mm and 2.85mm) or type of PVA. Order your PVA filament from 123-3D.ie for fast delivery in Ireland.

eSun neutral PVA filament 1.75mm, 0.5kg

Zoom in

Description eSun's neutral PVA filament is soluble in warm water. You can edit it with PLA, TPU PA (nylon) and other consumables to print extremely complex shapes or support materials. This eSun PVA filament has a diameter of 1.75mm.

Specifications

Amount:	0.5 kg	Nozzle temp range:	180 - 210 °C
Brand:	eSun	Our item no:	DFE20119
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	3.5 cm
Material:	PVA

Order now, we can ship this tomorrow!

€46.50

€37.80 Excl. 23% VAT

In stock

REAL neutral PVA filament 1.75mm, 0.5kg

Zoom in

Description This REAL PVA (PolyVinylAlcohol) filament is a (warm) water-soluble filament that is ideal for use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the coil at room temperature under conditions that are as dry as possible after opening. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum printing temperature is 210°C.

Read more about printing with PVA filament here.

Specifications

Amount:	0.5 kg	Nozzle temp range:	190 - 210 °C
Brand:	REAL	Our item no:	DFP02384
Colour:	neutral	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PVA	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

Order now, we can ship this tomorrow!

€48.50

€39.43 Excl. 23% VAT

In stock

REAL neutral PVA filament 2.85mm, 0.5kg

Zoom in

Description This Real PVA (PolyVinylAlcohol) 2.85mm filament is a (warm) water-soluble filament that is ideal for use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the coil at room temperature under conditions that are as dry as possible after opening. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum printing temperature is 210°C.

Read more about printing with PVA filament here.

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Nozzle temp range:	190 - 210 °C
Brand:	REAL	Our item no:	DFP02385
Colour:	neutral	Roundness:	>95%
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PVA	Spool width:	7.0 cm
Max deviation:	+mn ± 0.10 mm

€48.50

€39.43 Excl. 23% VAT

EU warehouse

REAL neutral PVA Plus filament 1.75mm, 0.5kg

Zoom in

Description The neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PVA Plus is ideal in combination with PETG and has a print temperature of up to 255 degrees.

Specifications

Amount:	0.5 kg	Nozzle temp range:	235 - 255 °C
Brand:	REAL	Our item no:	DFP02386
Colour:	neutral	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	35 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	PVA PLUS	Spool width:	7.0 cm
Max deviation:	+mn ± 0.05 mm

€58.50

€47.56 Excl. 23% VAT

EU warehouse

XYZprinting neutral PVA filament 1.75mm, 0.6kg (Cartridge)

Zoom in

Description This XYZprinting PVA filament (PolyVinylAlcohol) in the colour neutral dissolves in water. You use it as a supporting filament in combination with PLA. The material is odourless, biodegradable and adheres very well. This filament has a diameter of 1.75mm and can be used in combination with the da Vinci 2.0 A Duo.

Specifications

Amount:	0.6 kg	Heated bed temp:	0 - 45 °C
Brand:	XYZprinting	Material:	PVA
Colour:	neutral	Nozzle temp range:	180 - 190 °C
Filament diameter:	1.75 mm	Our item no:	DFP05054

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€52.50 (coming soon)

€42.68 Excl. 23% VAT

Polymaker PolyDissolve natural S1 filament 1.75mm, 0.75kg

Zoom in

Description This natural-coloured Polymaker Polydissolve S1 is a soluble filament. With this filament, you have greater design freedom. Polydissolve S1 is a water-soluble support material for filaments based on PLA, TPU, PVB and Nylon. It has perfect adhesion with these materials and at the same time offers good solubility. The natural filament has a diameter of 1.75mm and a weight of 0.75kg.

Specifications

Amount:	0.75 kg	Nozzle temp range:	210 - 225 °C
Brand:	Polymaker	Our item no:	DFP14010
Colour:	natural	Spool empty weight:	± 125 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 60 °C	Spool width:	4.5 cm
Material:	PolyDissolve S1

€72.50 (coming soon)

€58.94 Excl. 23% VAT

Polymaker PolyDissolve natural S2 filament 1.75mm, 0.5kg

Zoom in

Description Polymaker Polydissolve S2 is a soluble filament in the colour natural. With this filament you have greater design freedom, because many new applications are possible. Polydissolve S2 is a water-soluble support material for filaments based on PLA, TPU, PVB and Nylon. It has perfect adhesion with these materials and at the same time offers good solubility. The natural filament has a diameter of 1.75mm and a weight of 0.5kg.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 250 °C
Brand:	Polymaker	Our item no:	DFP14012
Colour:	natural	Spool empty weight:	± 190 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 110 °C	Spool width:	4.5 cm
Material:	PolyDissolve S2

€227.50

€184.96 Excl. 23% VAT

EU warehouse

REAL neutral PVA filament 2.85mm, 0.5kg

Zoom in

Description This Real PVA (PolyVinylAlcohol) 2.85mm filament is a warm water soluble filament that is ideal to use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the coil after opening at room temperature under conditions that are as dry as possible. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum print temperature is 225°C

Read more about printing with PVA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	190 - 210 °C
Colour:	neutral	Our item no:	DFV02001
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	0 - 50 °C	Inner diameter:	Ø 5.5 cm
Length:	60 m	Outer diameter:	Ø 20.0 cm
Material:	PVA	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

REAL neutral PVA Pro filament 1.75mm, 0.5kg

Zoom in

Description The neutral PVA Pro is the ideal support filament (1.75mm) for ABS. This material is suitable for printing temperatures up to 250°C. PVA Pro adheres perfectly to ABS, ASA and TPU98A. The material dissolves slowly, but completely, in lukewarm, running water. This makes it possible to create cavities and floating parts in your ABS 3D prints.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	235 - 255 °C
Colour:	neutral	Our item no:	DFV02004
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	170 m	Outer diameter:	Ø 20.0 cm
Material:	PVA Pro	Spool width:	4.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€57.50 (coming soon)

€46.75 Excl. 23% VAT

REAL neutral PVA Pro filament 2.85mm, 0.5kg

Zoom in

Description The neutral PVA Pro is the ideal support filament (2.85mm) for ABS. This material is suitable for printing temperatures up to 250°C. PVA Pro adheres perfectly to ABS, ASA and TPU98A. The material dissolves slowly, but completely, in lukewarm, running water. This makes it possible to create cavities and floating parts in your ABS 3D prints.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	REAL	Nozzle temp range:	235 - 255 °C
Colour:	neutral	Our item no:	DFV02005
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	35 - 60 °C	Inner diameter:	Ø 5.5 cm
Length:	60 m	Outer diameter:	Ø 20.0 cm
Material:	PVA Pro	Spool width:	4.5 cm

Order now, we can ship this tomorrow!

€57.50

€46.75 Excl. 23% VAT

In stock

123-3D neutral PVA Pro filament 2.85mm, 0.5kg

Zoom in

Description PVA Pro filament from 123-3D.ie dissolves completely in (cold or warm) water after 3D printing. That means you can effortlessly remove support print layers. PVA Pro has all the benefits of standard PVA, plus better thermal stability and improved adhesion to PLA, ABS and PETG. With PVA Pro you get the most out of your dual extruder Ultimaker 3D printer.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.10 mm
Brand:	123-3D	Nozzle temp range:	180 - 205 °C
Colour:	neutral	Our item no:	DFV03001
Filament diameter:	2.85 mm	Roundness:	>95%
Heated bed temp:	40 - 60 °C	Inner diameter:	Ø 5.2 cm
Length:	60 m	Outer diameter:	Ø 20.0 cm
Material:	PVA Pro	Spool width:	5.5 cm

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€44.50 (coming soon)

€36.18 Excl. 23% VAT

1.75mm PVA

2.85mm PVA

PVA

Buying PVA filament for your 3D printer? Order online at 123-3D.ie

At 123-3D.ie you can order a range of water soluble PVA filament for 3D printing. You can only use PVA filament if you have a printer with multiple extruders and it works best when combined with ABS and PLA filament.

In our wide range you can choose from material with a filament diameter of 1.75mm and 2.85mm. Choose from one of the many colours of filament and order directly from us for your next 3D project!

Read more about PVA filament here.

Do you have any questions about ordering filament or other 3D projects? Check out our Frequently Asked Questions page.

Quantity	Product
No products
Total: €0.00

PVA

1.75mm PVA

2.85mm PVA

PVA

Buying PVA filament for your 3D printer? Order online at 123-3D.ie

Popular products