Buy 3D printers, filament, parts & tools | lowest prices

Elegoo Mercury XS Bundle (washing & curing machine)

Description Do you edit many prints and don't want to wait until one print is completely finished? Then the Elegoo Mercury XS Bundle (washing & curing machine) is ideal! With this bundle you can wash a print and cure another print at the same time.

Easy and silent use
The Elegoo Mercury XS Bundle consists of three devices. One device washes the print, the other hardens the print and there is a separate UV lamp for the inaccessible corners. This significantly improves the quality of the prints. You can easily set the cleaning and curing time with the button on the front of the machine. The screen in the button shows the set time and how long it will take before the print is ready. The cure device has a 360° rotating platform, so that the print cures evenly and quickly. Due to the design without fans, the curing process is extra quiet.

Extra safe
During the curing process, the cure device is completely closed with a UV-resistant lid. This blocks 99.9% of UV light. The 7000ml water tank is closed with a rubber rim. This prevents the release of alcohol during washing, so that your health is protected. And for the separate UV lamp, UV-resistant glasses are included.

Compatible
The Mercury XS Bundle is compatible with most LCD, DLP and SLA 3D printers.

Contents of the Elegoo Mercury X Bundle (washing & curing machine)

Wash machine
Cure machine
Curing lamps
Curing platform
UV-resistant lid
Wash container
UV resistant glasses
Drying rack
Adapter
Instruction manual
Tools
Manual UV Lamp

Specifications

Brand:	Elegoo	Our item no:	DAR00846
UV wavelength:	385-405 nm	Weight:	13.1 kg
Input voltage:	110-240V

Add a Smart Plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

€179.00 (coming soon)

€145.53 Excl. 23% VAT

Creality 3D UW-01 Washing & Curing Machine

Zoom in

Description Use Creality 3D's UW-01 Washing & Curing Machine to wash or cure your resin prints. The machine is suitable for large objects thanks to the washbasin of 190mm x 154mm x 200mm. You can wash your print separately or together with the base plates in the drying rack. The washing/curing machine has 18 built-in UV LED lamps and is compatible with most resin printers. The cure device has a 360° rotating platform, so that the print cures evenly and quickly. The machine stops immediately when the valve is removed during the curing process. This Creality 3D UW-01 is equipped with user-friendly buttons, a large LED screen and 3 washing and curing speeds.

Specifications

Brand:	Creality 3D	Power rating:	96 W
UV wavelength:	385-405 nm	Our item no:	DAR00847
Dimensions:	370 x 225 x 225 mm	Voltage:	24 v
Input voltage:	110-220V	Weight:	6.5 kg

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€131.50 (coming soon)

€106.91 Excl. 23% VAT

SUNLU UV Resin Curing Chamber

Zoom in

Description The SUNLU UV Resin curing chamber has 16 UV LED lights that cure your resin 3D print perfectly. The room has a 360° platform with an improved motor. This will cause all sides of your print to cure evenly. Because the chamber is completely closed, there is no light pollution. The real-time display shows how long the resin still has to cure, so you will not be faced with any surprises. The internal dimensions of the chamber are 20.5cm x 17cm x 15.5cm (dxwxh) and the timer can be set between 1 and 600 seconds.

Specifications

Brand:

Sunlu

Our item no:

DAR01386

Order now, we can ship this on Monday!

€54.50

€44.31 Excl. 23% VAT

In stock

Sunlu RC2 Resin Dry and Cure Machine

Zoom in

Description The Sunlu RC2 Resin Dry and Cure machine is ideal for drying and curing your resin 3D prints. Thanks to the large volume of 200mm x 200mm x 250mm, you have the freedom to use this machine for larger projects. The design has 20 UV lamps (4 on the top, 4 on the bottom and 12 distributed over the sides) so that the print is well lit from all sides.

Suitable for any project
The refined air supply technology and natural drying speed up the drying process of prints by up to 60%, allowing you to work more efficiently. The 3 wind speed settings allow you to perfectly adjust the machine to different materials and projects. For extra convenience during cleaning, simply remove the turntable. This way you can easily reach everything and the machine is in perfect condition for the next time.

Specifications

Brand:	Sunlu	Our item no:	DAR01706
Dimensions:	305 x 235 x 245 mm	Weight:	2.4 kg
Power rating:	42 W

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Anycubic 3D Wash & Cure 2.0

Zoom in

Description The Anycubic 3D wash & cure 2.0 is indispensable for all lovers of resin 3D prints. This device cures your 3D prints and washes them in minutes. The model is suitable for 3D prints with dimensions up to 140mm x 165mm. The versatile 3D Wash & Cure is easy to operate and has different wash modules of 2 minutes, 4 minutes and 6 minutes. You can easily adjust the height of the basket to the size of the object for a thorough cleaning. There is a sealed container in the package. Here you can store washing liquid and reuse it later.

This model features strong UV light (365nm/405nm) that completely cures objects on a rotating platform.

Specifications

Brand:	Anycubic	Power rating:	40 W
UV wavelength:	365-405 nm	Our item no:	DCP00195
Dimensions:	378 x 225 x 220 mm	Weight:	6 kg
Input voltage:	110-220V

Add a Smart Plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

€127.50 (coming soon)

€103.66 Excl. 23% VAT

Anycubic 3D Wash & Cure plus machine

Zoom in

Description The Anycubic 3D wash & cure plus cleans prints and cures prints in one machine. The device is easy to operate and has multiple washing options from 1 to 60 minutes. The large, rotating cleaning action ensures that the liquid cleans every part of the model. Thanks to the 360°C automatic rotating platform, equipped with L-shaped strip lighting, the machine can achieve thorough curing. This Wash & Cure Plus machine is suitable for larger models and is compatible with all LCD resin printers up to 8.9 inches.

Specifications

Brand:	Anycubic	Power rating:	40 W
UV wavelength:	405 nm	Our item no:	DCP00202
Dimensions:	479 x 290 x 270 mm	Weight:	6.5 kg
Input voltage:	110-240V

Add a Smart Plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€219.50 (coming soon)

€178.46 Excl. 23% VAT

Elegoo Mercury curing machine

Zoom in

Description The Elegoo Mercury UV chamber cures your resin creation evenly with UV light. This user-friendly and energy-efficient UV-LED curing cabinet is the ideal tool to make your UV resin creations with a maximum volume of 142mm x 150mm even and stronger. With the LED time display and touch buttons you can easily set the curing time from 0 to 9.5 minutes. The light-driven turntable can rotate 360 degrees without a battery, because this machine absorbs UV light.

On the inside of the curing cabinet is a reflective sheet, on which the light reflects speeding up and strengthens the curing process. You can easily observe the curing of your object through the viewing window. The optical filter ensures no UV light escapes from the cabinet through this window. The Elegoo Mercury is suitable for Elegoo resin, most standard 405nm resin and most LCD, DLP or SLA 3D printed objects. The Elegoo Mercury UV Curing Box is not only a handy addition to your SLA printer, but also an excellent choice in terms of quality!

Specifications

Brand:	Elegoo	Power rating:	25 W
UV wavelength:	385-405 nm	Our item no:	DCP00203
Dimensions:	251.5 x 150 x 150 mm	Video instructions:	Instructional video
Input voltage:	110-220V	Weight:	1.35 kg

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€69.99 (coming soon)

€56.90 Excl. 23% VAT

Anycubic Wash & Cure 3 Plus

Zoom in

2
1
0

Description Speed up the post-processing of your 3D prints by using the Wash & Cure 3 Plus from Anycubic. This Wash & Cure machine has a larger capacity than previous Anycubic Wash & Cure machines. It has a capacity of 7.6 litres and can wash and cure a 3D print of up to 228mm x 128mm x 260mm. 3D prints can be cleaned by placing it in the supplied basket or by hanging it from the top.

Higher quality
The design uses an innovative Flexicure light with a gooseneck, which increases the energy value by 30,000 W/cm². This results in improved curing in crucial areas, such as the top of your print and other hard-to-reach areas. The Wash & Cure 3 Plus uses a new setup, which cures 3D prints 20% more uniformly. This allows for more precise curing, resulting in greater consistency and higher quality.

Efficient & fast
The basket for holding your prints is made of double-layer PP and supports washing parts with the build plate. In addition, you will never have problems with rust on the basket, because this material is rust-free. The basket comes with two heights at which you can adjust: 150mm and 250mm. This allows the cleaning alcohol to be used more efficiently. The new two-layer curing platform also gives the option to cure a larger number of smaller 3D prints at once. This will speed up your 3D printing process significantly.

User friendly
Both washing and curing can be easily selected. The goose neck light can also be turned on or off with just one click. The washing and curing time can be set between 1 and 30 minutes. The design is designed to operate more quietly, creating a comfortable working environment.

Specifications

Brand:	Anycubic	Power rating:	40 W
UV wavelength:	365-405 nm	Our item no:	DAR01447
Dimensions:	434 x 312 x 267 mm	Weight:	5.7 kg
Input voltage:	110-220V

€179.00

€145.53 Excl. 23% VAT

EU warehouse

Anycubic Wash & Cure Max

Zoom in

1
0

Description Simplify your resin printing finishing process with the complete Wash & Cure Max from Anycubic. Washing and curing your model will be streamlined, so you no longer have to do this manually. This Wash & Cure Max from Anycubic has a minimialist design and a beautiful white and grey finish, so it fits in with any interior.

Ideal capacity
This machine has an impressive cleaning capacity of 14.9 liters. The maximum size for 3D prints is 300 x 165 x 300, leaving plenty of room for cleaning and curing one or more of your resin 3D prints. It is also possible to place a complete model with the building plate in this machine.

Efficient
The Wash & Cure Max cleans by using the 'spray cleaning' method. Your print will then be exposed 360° on a rotating platform, so that all sides of your model are evenly cured. The cleaning alcohol is used efficiently, resulting in savings of more than 50%. Due to the cleaning method, your print will still be thoroughly cleaned, without using up much alcohol. (A 5 liter isopropyl bucket can clean up to 20 models)

Intelligent
The smart detection will identify problems and notify you. For example, this machine can register when you try to turn on the machine when the lid is open, no water is coming in or when the drain is not working properly and liquid remains in the bucket. This avoids any problems during post-processing.

Specifications

Brand:	Anycubic	Our item no:	DAR01451
UV wavelength:	365-405 nm	Voltage:	24 v
Dimensions:	556 x 434 x 434 mm	Weight:	13.5 kg
Input voltage:	110-220V

Add a Smart Plug

WOOX UK Smart Plugs 2-pack with energy monitor €29.95

Order now, we can ship this on Monday!

€339.00

€275.61 Excl. 23% VAT

In stock

Uniformation Ultrasonic Resin Cleaner

Zoom in

2
1
0

Description

Uniformation Ultrasonic Resin Cleaner

The UniFormation Ultrasonic Resin Cleaner W230 ensures that the process of cleaning your resin prints is quick and easy. Effortlessly and gently remove resin from models in a few seconds with this resin cleaner from UniFormation - it won't damage your prints either!

Using high-frequency vibrations (40KHz) to effectively clean your 3D prints, the UniFormation Cleaner is made from corrosion-resistant materials for durability. With a washing volume of 228mm x 128mm x 200mm, as well as a capacity of 6.5L, the UniFormation Ultrasonic Resin Cleaner supports the deep cleaning of resin prints of a wide variety of sizes.

Fitting seamlessly into your 3D printing setup, the build plate of the Gktwo is able to slide into the slot at the top of the resin cleaner. The model can then be fully submerged in the cleaning fluid, cleaning your prints more thoroughly. You can also take the models off the build plate and place them in the basket for direct cleaning instead, (the fine mesh in the basket means small parts stay still).

Achieve hassle-free cleaning thanks to this resin cleaner’s powerful drainage system and unique flip-top design that allows you to store the cleaning fluid to be re-used at another time when the cover is closed.

Ensure a premium finish for your prints with the UniFormation Ultrasonic Resin Cleaner W230.

Specifications

Brand:	Uniformation	Our item no:	DKI00226
Dimensions:	330 x 202 x 382 mm	Weight:	8.5 kg
Input voltage:	110-220V

Order now, we can ship this on Monday!

€258.00

€209.76 Excl. 23% VAT

In stock

Uniformation 405nm UV Resin Curing Station 10.2"

Zoom in

1
0

Description

UniFormation 405nm UV Resin Curing Station 10.2"

Introducing the Uniformation 405nm UV Resin Curing Station, a convenient solution for finishing your resin prints. Easily view your prints as they cure with the see-through window and a 360° rotation turntable.

The impressive build quality can block up to 99% of UV light, for more efficient and even curing. The spacious design allows you to cure even the most ambitious of projects. With a product size of 300mm (L) x 300mm (W) x 250mm (H), as well as a curing volume of 260mm (D) x 160mm (H), this Uniformation resin curing station is also ideal for batch printing.

Evenly cured prints are assured here, with no blind spots. The 360° automatic rotating turntable ensures that none of your print is missed. Featuring a UV wavelength of 400 – 405nm, this light box prevents over and under-curing. Prints are also sturdy and feature a high-shine finish thanks to the powerful UV lights, with 4 LED strips on all sides of the machine, (16 UV lights).

The Uniformation 405nm UV Resin Curing Station works with most resin 3D printers (including the UniFormation GKtwo) and can be used to print a wide range of models including dental models, jewellery, parts and prototypes. Finally, the flip-up lid makes the curing station more compact when working, for greater efficiency when curing your resin prints.

Specifications

Brand:	Uniformation	Printer voltage:	24 v/°c
UV wavelength:	405 nm	Our item no:	DKI00227
Dimensions:	250 x 300 x 300 mm	Weight:	9 kg
Input voltage:	110-220V

Order now, we can ship this on Monday!

€132.00

€107.32 Excl. 23% VAT

In stock

Uniformation Cure3 Ultra Curing Station

Zoom in

1
0

Description The Uniformation Cure 3 Ultra Curing Station is a large curing chamber of 362mm x 200mm. This large size is ideal for curing large 3D prints or multiple smaller 3D prints. This makes this curing chamber also very useful for mass production and print farms.

Perfect curing
This curing chamber has 4 UV LED strips that are distributed over the sides. Thanks to the transparent 360˚ turntable, your 3D print is evenly illuminated from all sides. This way you get perfectly cured 3D prints every time. The standard curing time is set at 3 minutes, but can be manually adjusted to easily 30 minutes. To get even more out of your 3D print, you can use this machine to dry the print. The built-in drying system can be set up to 50˚ and between 0 and 15 minutes, so you can be sure that the print is perfectly dry before it is cured. The print is cured with 400 – 405nm UV light.

Safety first
The 500cm² carbon filter is magnetic and can be attached to the back of the machine. This makes it easy to place and replace. This filter ensures that there is less nuisance from resin odor, so you are assured of a safe working environment. For extra safety when using this curing chamber, there is an extra safety feature that prevents the machine from starting when the lid is open. In addition, the chamber has a plastic protection against exposure to UV light.

Included with the Cure 3 Ultra Curing Station:

Acrylic turntable
Air filter
Philips screwdriver
Power cord
Screws

Specifications

Brand:	Uniformation	Printer voltage:	24 v/°c
UV wavelength:	405 nm	Our item no:	DAR01848
Dimensions:	305 x 399 x 437 mm	Weight:	15.1 kg
Input voltage:	110-220V

Interested in ordering this machine?

Click HERE to send us a mail and we'll alert you when it becomes available!

€275.00 (coming soon)

€223.58 Excl. 23% VAT

Uniformation Wash 3 Ultra Washing Machine

Zoom in

1
0

Description Wash excess resin from your 3D prints with the Wash 3 Ultra Washing Machine. This machine provides a powerful and careful 360˚ cleaning of your prints. The cleaning space is 300mm x 280mm x 165mm and the basket is 290mm x 335mm x 85mm. You can use up to 10 litres of solvent at a time. The machine comes with a separate storage module for your solvent bottles.

Efficient
The handy separation block gives you the option to reduce the cleaning space for cleaning small 3D prints. This way you need to use less solvent. You have different options for cleaning. You can choose cleaning, normal cleaning or cleaning in 2 or 3 steps. With normal cleaning you place your 3D print directly in the basket and it is cleaned there. You can also choose to leave your 3D print on the build plate and put it with plate and all in the washing machine.

Please note: the '3-step cleaning' option is only suitable for the GK3 Ultra.

Included with the Wash 3 Ultra Washing Machine:

3 x solvent bottle cover
3 x connecting tubes
Bottom of the storage module
Air filter
Separation block
Charging cable and adapter
Basket for normal cleaning

Specifications

Brand:	Uniformation	Our item no:	DAR01849
Dimensions:	495 x 410 x 450 mm	Weight:	30 kg
Input voltage:	110-220V

Order now, we can ship this on Monday!

€475.50

€386.59 Excl. 23% VAT

In stock

Elegoo Mercury Plus 3.0 Wash & Curing Machine

Zoom in

Description Go for a perfect curing with the Mercury Plus 3.0 Wash & Cure machine from Elegoo. With this machine you can not only wash your print, but also cure it directly. This saves you time and effort and you also have a perfect 3D print. The buttons make it possible to manually set the washing and curing time between 0 and 30 minutes. You can wash a model of up to 214mm x 135mm x 180mm when using the platform. Without a platform, the model can be up to 230mm x 135mm x 260mm. The maximum size for curing is ⌀ 250mm x 290mm. The Mercury Plus works with 48 W and uses 100-240 V, 50/60 Hz, 24 V and 2 A.

Specifications

Brand:	Elegoo	Power rating:	48 W
Dimensions:	412.5 x 302.5 x 302.5 mm	Our item no:	DAR01893
Input voltage:	100-240V

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€169.00 (coming soon)

€137.40 Excl. 23% VAT

SUNLU UV resin curing chamber

Zoom in

Description In the SUNLU resin curing chamber, the UV LED lights ensure that your resin project cures perfectly. The chamber is equipped with a 360 degree rotating platform, allowing all sides to cure equally. In addition, the room is also completely closed, so that no light pollution takes place. With the real-time display you can see exactly how long the resin has to cure. The timer of this curing chamber can be set from 1 to 600 seconds. The interior dimensions of the room are 205mm x 170mm x 155mm (d x w x h)

Specifications

Brand:	Sunlu	Power rating:	60 W
UV wavelength:	405 nm	Our item no:	DAR00626
Dimensions:	230 x 225 x 235 mm	Weight:	1.6 kg

€50.50 (coming soon)

€41.06 Excl. 23% VAT

Quantity	Product
No products
Total: €0.00

Curing chambers

Popular products