Creality 3D Ender-3 S1 Plus

Direct Drive Extruder plate for E3D Hemera Extruder (123-3D brand)

Description The black Direct Drive Extruder plate for E3D Hemera Extruder from 123-3D is made of anodized aluminum. It is easy to assemble on your Creality 3D printer.

This pack contains:

1 Extruder plate
1 Allen key
2 tie wraps
Set screws

Specifications

Brand:	123-3D	Our item no:	DAR00790
Colour:	black

€11.50

€9.35 Excl. 23% VAT

EU warehouse

Creality 3D Sprite Extruder 260℃ High Temperature for Ender-3 S1

Zoom in

Description Use the Sprite Extruder 260°C High Temperature from Creality 3D for your Ender-3 S1 printer. The part weighs 266g and has a small size of 54mm x 50mm x 64.3mm. More stable printing is possible thanks to the dual gear system. The part can easily switch between air-cooled and water-cooled heat dissipation. This Creality 3D extruder is suitable for various filaments such as PLA, TPU, PETG and ABS.

This kit is suitable for the Creality 3D Ender-3 S1 printers.

Specifications

Brand:	Creality 3D	Extruder max temp:	260 °C
Filament diameter:	1.75 mm	Our item no:	DAR00821
Dimensions:	54 x 64.5 x 50 mm	Weight:	0.266 kg

€71.00

€57.72 Excl. 23% VAT

EU warehouse

Creality 3D Sprite Extruder Pro 300℃ High Temperature | All Metal Design

Zoom in

Description Use the Sprite Extruder Pro 300°C High Temperature | All Metal Design from Creality 3D for your 3D printer. The part weighs 288g and has a small size of 54mm x 50mm x 64.3mm. More stable printing is possible thanks to the dual gear system. The extruder makes it possible to print materials at high temperatures of up to 300°C. The part can easily switch between air-cooled and water-cooled heat dissipation. This Creality 3D extruder is suitable for various filaments such as PLA, TPU, PETG and ABS.

This upgrade is suitable for the Ender-3 S1 and the CR-10 Smart Pro printers from Creality 3D.

Specifications

Brand:	Creality 3D	Extruder max temp:	300 °C
Filament diameter:	1.75 mm	Our item no:	DAR00822
Dimensions:	54 x 64.3 x 50 mm	Weight:	0.288 kg

€83.00

€67.48 Excl. 23% VAT

EU warehouse

Creality 3D Sonic Pad

Zoom in

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Brand:	Creality 3D	Our item no:	DAR00885
Colour:	black	Voltage:	12 v
Standard WiFi connection:	802.11 b/g/n	Weight:	0.46 kg
Dimensions:	40 x 222 x 128 mm

€159.50

€129.67 Excl. 23% VAT

€180.00 Creality3D rrp

EU warehouse

Creality 3D Laser module 1.6W | 24V

Zoom in

Description Open up a world of extra possibilities by converting your 3D printer into a laser engraving machine with the Creality 3D Laser module 1.6W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration, you can use the focus lens and the lever. Gently push this lever down to focus accurately. When you are done focusing, you can lift the lever back up to store it safely.

Other functionalities
You can engrave up to 0.06mm accurately thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05mm balsa wood plate. In addition, this laser module offers the possibility to work with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engraving and laser cutting, or pause the current action. By using a TF card/MicroSD card, you can also make beautiful creations without connecting the 3D printer to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Brand:	Creality 3D	Our item no:	DAR00961
Power rating:	1,600 mw	Voltage:	24 v

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€87.50

(coming soon)

€71.14 Excl. 23% VAT

Creality 3D Laser module 5W | 24V

Zoom in

Description Open a world of extra possibilities by converting your 3D printer into a laser engraving machine with this Creality 3D Laser module 5W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration you can use the focus lens and lever. Gently push this lever down to focus accurately. When you have finished focusing, you can raise the lever again for safe storage.

Other functionalities
You can engrave accurately up to 0.06mm thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05mm sheet of balsa wood. In addition, this laser module offers the possibility of working with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engrave and cut, or pause the current action. By using a TF card/MicroSD card you can also make beautiful creations without the 3D printer being connected to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Brand:	Creality 3D	Our item no:	DAR00962
Power rating:	5 W	Voltage:	24 v

€149.00

€121.14 Excl. 23% VAT

EU warehouse

Creality 3D E-Fit Dual drive extruder kit

Zoom in

Description The E-Fit kit is the perfect extruder upgrade for various models of Creality 3D printers. This powerful module is compact and suitable for both bowden and direct drive applications. The quick release design makes replacing filament a breeze, while the dual drive gears ensure perfect throughput.

The Creality E-Fit extruder kit is suitable for the following models of 3D printers:

Ender-3
Ender-3 V2
Ender-3 Pro
Ender-3 S
CR-10S
CR-10
CR-10 S5
CR-10 S4
CR-10 Mini
CR-20
CR-20 Pro

Contents of the package:

Back plate
Fan adapter plate
Tie wraps
Allen keys
Air passage
Screws
Connector
Silicone pad
PTFE tube
Motor cable

Specifications

Brand:	Creality 3D	Filament diameter:	1.75 mm
Extruder Gear Ratio:	3:1	Our item no:	DAR00963

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Plus) NTC 100kΩ thermistor

Zoom in

Description Replace your old thermistor of your Creality Ender-3 S1 or Ender-3 S1 Plus with this original Creality NTC 100kΩ thermistor.

Specifications

Brand:

Creality 3D

Our item no:

DAR01047

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Plus) heater cartridge | 24V, 40W

Zoom in

Description Replace your old heater cartridge of your Creality Ender-3 S1 or Ender-3 S1 Plus with this original Creality heater cartridge of 24 volts and 40 watts.

Specifications

Brand:	Creality 3D	Power rating:	40 W
Diameter:	6 mm	Our item no:	DAR01049
Length:	2 cm	Voltage:	24 v

€8.00

€6.50 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Pro) Y-axis endstop

Zoom in

Description This Creality 3D Y-axis End Stop can be used on the following models of Creality printers: Ender-3 S1 and the Ender-3 S1 Plus.

Specifications

Brand:

Creality 3D

Our item no:

DAR01050

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D X-axis Endstop

Zoom in

Description Creality 3D X-axis endstop.

Specifications

Brand:

Creality 3D

Our item no:

DAR01051

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 Plus PC bonding platform kit, 310mm x 315mm x 2.3mm

Zoom in

Description The Creality 3D Ender-3 S1 Plus PC bonding platform kit is ideal to use as an additional printing surface so that you can quickly start a new print after your print is finished. The spring steel print bed is 310mm × 315mm × 2.3mm and is provided with a soft, magnetic sticker. This bonding platform is suitable for the Ender-3 S1 Plus 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Our item no:	DAR01104
Dimensions:	2.3 x 315 x 310 mm

€41.50

€33.74 Excl. 23% VAT

EU warehouse

BigTreeTech Panda PWR

Zoom in

Description Make it easy on yourself with the Panda PWR from Bigtreetech. This smart power management module can be controlled remotely via wifi, allowing you to monitor and switch off the power at any time. The ability to monitor your power consumption and costs in real time also makes the Panda PWR ideal for print farms. This module is suitable for Creality Ender/K1, Anycubic Kobra and Bambu Lab 3D printers.

User friendly
You can easily control the Panda PWR via your mobile or the Panda Touch. Connect the Panda PWR to your 3D printer and the power outlet. When the blue indicator light starts to shine, you can connect to the 'PandaPWR' network and the default password is 987654321. It is recommended to change this password after the first time logging in. After the setup page is opened, you can select your own network. The Panda PWR has 3 USB ports for enhanced support. USB1 is controllable, which makes it most suitable for devices that do not need constant power, such as USB light strips and USB fans. USB2 is always on and is therefore ideal for devices that need constant power.

Combine with the Panda Touch
The Panda PWR can also be used in combination with the Panda Touch, allowing you to work even more efficiently. By connecting 3D printers individually to a Panda PWR, you can control the flow of up to 10 3D printers with the Panda Touch, allowing you to streamline your process. To connect your Panda PWR to your Panda Touch, click the '+' on your Panda Touch and hold the Panda PWR close to it. Press the 'bind' button until the light turns blue. You will get a confirmation pop-up on the Panda Touch and the indicator light will turn green.

Other functionalities
The Panda PWR is made of high-quality materials. The full copper heat sink and the robust protection against overvoltage, overcurrent and short circuits. This makes this product very safe and delivers exceptional performance. This module is approved and contains CE and FCC certifications.

Specifications

Brand:	BigTreeTech	Our item no:	DAR01858
Input voltage:	100-240V

€48.50

€39.43 Excl. 23% VAT

EU warehouse

Creality 3D silicone sock

Zoom in

Description This silicone sock is ideal to protect your heating block. The sock is 23.1mm x 19.1mm x 17.05mm and made of black silicone that can withstand high temperatures. It is an original replacement part for your 3D printer. This product is suitable for the following 3D printers from Creality 3D:

CR-10 Smart Pro
Ender-3 S1
Ender-3 S1 Pro
Ender-3 S1 Plus
Sermoon V1/V1 Pro
Sermoon V2
CR-200B Pro

Specifications

Brand:	Creality 3D	Our item no:	DAR01397
Colour:	black	Weight:	0.003 kg

€4.95

€4.02 Excl. 23% VAT

EU warehouse

Creality 3D Heating Block Kit - High Temperature (300℃)

Zoom in

Description Upgrade your 3D printer with this Heating Block Kit-High Temperature (300℃) from Creality 3D. This has been specially developed for FDM printers that use a Sprite Extruder. The heating block can print at a maximum temperature of 300 °C. This kit is compatible with the following Creality 3D 3D printers:

Ender-3 S1 Plus
Ender-3S1
Ender-3S1 Pro
CR-10 Smart Pro

Specifications

Brand:	Creality 3D	Our item no:	DAR01398
Extruder max temp:	300 °C	Weight:	0.018 kg

€32.50

€26.42 Excl. 23% VAT

EU warehouse

Creality 3D Heating Block Kit - High Temperature Pro (300℃)

Zoom in

Description Upgrade your 3D printer with this Heating Block Kit-High Temperature Pro (300℃) from Creality 3D. This has been specially developed for FDM printers that use a Sprite Extruder. The heating block can print at a maximum temperature of 300 °C. The chrome copper of the pro version ensures that the block can deliver better performance and dissipate heat faster. This kit is compatible with the following Creality 3D 3D printers:

Ender-3 S1 Plus
Ender-3S1
Ender-3S1 Pro
CR-10 Smart Pro

Specifications

Brand:	Creality 3D	Our item no:	DAR01399
Extruder max temp:	300 °C	Weight:	0.019 kg

Order now, we can ship this today!

€34.50

€28.05 Excl. 23% VAT

In stock

Creality 3D Ender-3 S1 42-26 stepper motor

Zoom in

Description This 42-26 Ender-3 V3 SE X-axis stepper motor is an original replacement product from Creality. The motor operates at 0.84 amps and rotates in 1.8 degree increments. This product is suitable for the Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, Ender-3 V3 SE, Ender-3 V3 KE and the Ender-5 S1 3D printers from Creality.

Specifications

Brand:	Creality 3D	Our item no:	DAR01573
Current rating:	0.84 A	Stepping angle:	1.8

Order now, we can ship this today!

€13.50

€10.98 Excl. 23% VAT

In stock

Creality 3D Ender-3 S1 (Plus/Pro) X-axis_Limit Switch

Zoom in

Description This X-axis limit switch is an X-CRI-4111 PCBA module that works at 1V. The product is suitable for Creality Ender-3 V2 Neo, Ender-3 S1 Plus, Ender-3 S1 and Ender-3 S1 Pro 3D printers.

Specifications

Brand:

Creality 3D

Our item no:

DAR01586

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 Pro/Plus radial fan 24V, 30mm x 30mm x 10mm

Zoom in

Description This fan is an original Creality replacement part. The radial fan is 30mm x 30mm x 10mm and works with 24V. The part is suitable for the Ender-3 S1 Pro and Ender-3 S1 Plus 3D printers from Creality.

Specifications

Brand:	Creality 3D	Our item no:	DAR01587
Dimensions:	10 x 30 x 30 mm	Voltage:	24 v

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D Sermon D1 Filament Sensor Kit

Zoom in

Description This Creality 3D Filament Sensor Kit is suitable for the following Creality printers: Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus and the CR-M4.

Specifications

Brand:	Creality 3D	Our item no:	DRO00196
Filament diameter:	1.75 mm

€17.50

€14.23 Excl. 23% VAT

EU warehouse

Creality 3D heating block kit - Standard for Sprite Extruder

Zoom in

Description Upgrade your 3D printer with this Heating Block Kit-Standard from Creality 3D. This has been specially developed for FDM printers that use a Sprite Extruder. The heating block is made of stainless steel and can print at a maximum temperature of 260°C. This kit is compatible with the Creality Ender-3 S1 and Ender-3 S1 Plus.

Specifications

Brand:	Creality 3D	Our item no:	DRO00211
Extruder max temp:	260 °C	Weight:	0.019 kg

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this today!

€76.50

€62.20 Excl. 23% VAT

In stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Brand:

123-3D

Our item no:

DGS00122

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€84.50

(coming soon)

€68.70 Excl. 23% VAT

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations.The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Our item no:	DAR00265	Video promo:	Promotion video
Quantity:	4 Quantity

Order now, we can ship this today!

€17.00

€13.82 Excl. 23% VAT

In stock

123ink air pressure cleaner, 400ml

Zoom in

Description With the 123ink air pressure cleaner you can effortlessly remove dirt, dust and lint from your keyboard, printer, computer and other electronics. The cleaner is ideal for cleaning holes, cracks and small openings that you cannot reach with a vacuum cleaner or cloth. The 123ink air pressure cleaner has a capacity of 400ml and should be used upright.

Of course this 123ink product also comes with a 100% warranty!

Specifications

Brand:	123inkt	Volume:	400 ml
Our item no:	301186

Order now, we can ship this today!

€7.75

€6.30 Excl. 23% VAT

In stock

Creality 3D Air Purifier - FDM

Zoom in

Description The Creality Air Purifier ‑ FDM is a powerful air purifier specifically developed for FDM 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features:

360° air purification with an airflow of up to 250 m³/h
5-stage filter system with HEPA and activated carbon filters
Touchscreen with real-time PM2.5 display

Specifications

Brand:	Creality 3D	Our item no:	DAR02819
Power rating:	360 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€595.50

(coming soon)

€484.15 Excl. 23% VAT

Creality 3D Air Purifier - Resin

Zoom in

Description The Creality Air Purifier ‑ Resin is a powerful air purifier specifically developed for Resin 3D printers. The unit removes harmful particles, unpleasant odours, and volatile organic compounds (VOCs) released during printing, ensuring a cleaner and healthier working environment.

Key features: