Bambu Lab P1S

1 - 24 of 108

Bambu Lab AMS - Automatic Material System

Description Open a world of new, creative possibilities with Bambu Lab AMS. This makes it possible to print with different colours and materials. This allows you to easily print supports from fragile or soluble material, so you have to spend less time on post-processing.

Intelligent system
The AMS uses an intelligent system including a 32-bit MCU and a smart algorithm. It detects when the filament runs out and has a filament backup system. This system ensures a smooth transition to a new spool, allowing the 3D printer to continue printing undisturbed. This way you can print much easier and more efficiently and no unused filament remains on the spool.

The AMS also detects whether the filament has become tangled. At that point it will stop printing so you can solve the problem. By using Bambu Lab filaments, the AMS can identify which rolls of filament you have added. For filaments that are not from Bambu Lab, it is necessary to manually enter which filaments they are in Bambu Studio.

Always dry
The housing is airtight and absorbs moisture by means of a desiccant. A humidity sensor monitors the humidity in the AMS and gives you a signal when it is too high or when the desiccant needs to be replaced. This keeps your filament dry and always in optimal condition for good prints.

Up to 16 colours
If you want to print with more than 4 different materials or colours, you can do this by connecting multiple AMS. By using an AMS hub, you can print up to 16 colours and different filaments at the same time. Please note: you do not receive this hub as standard.

Compatibility
Bambu Lab X1 series
Bambu Lab P1 series

Specifications

Brand:	Bambu Lab	Our item no:	DAR01228
Filament diameter:	1.75 mm	Weight:	2.5 kg
Dimensions:	224 x 368 x 283 mm

€410.00

€333.33 Excl. 23% VAT

In stock

123-3D flexible magnetic PEO & PEI bed for Bambu Lab 3D Printer, 256mm x 256mm

Zoom in

Description This 123-3D flexible magnetic PEO & PEI bed is ideal as a replacement or a spare for your Bambu Lab printer. The plate is double-sided, with a PEO plate on one side and a PEI plate on the other. This allows you to choose which side you would like to use. The print bed is also magnetic so it can easily be used on magnetic surfaces. With the use of clamps, the plate can also be used on a non-magnetic surface. The flexibility of the board allows you to quickly and easily remove your 3D prints. This print bed is 256mm x 256mm and suitable for Bambu Lab 3D printers.

Specifications

Brand:	123-3D	Our item no:	DAR01380
Dimensions:	256 x 256 mm

€31.50

€25.61 Excl. 23% VAT

In stock

123-3D flexible magnetic PEY & PEI bed for Bambu Lab 3D Printer, 256mm x 256mm

Zoom in

Description The 123-3D flexible magnetic PEY & PEI bed serves as an ideal replacement or spare part for your Bambu Lab printer. Featuring a double-sided design, it offers a PEY plate on one side and a PEI plate on the other, granting you the choice of which side to utilise. Additionally, its magnetic properties enable easy attachment to magnetic surfaces, while clamps allow for usage on non-magnetic surfaces. The board's flexibility facilitates swift and effortless removal of your 3D prints. Sized at 256mm x 256mm, this print board is compatible with Bambu Lab 3D printers.

Specifications

Brand:	123-3D	Our item no:	DAR01382
Dimensions:	256 x 256 mm

€31.50

€25.61 Excl. 23% VAT

In stock

123-3D flexible magnetic PET & PEI bed for Bambu Lab 3D Printer, 256mm x 256mm

Zoom in

Description This 123-3D flexible magnetic PET & PEI bed is ideal as a replacement or a spare for your Bambu Lab printer. The plate is double-sided, with a PET plate on one side and a PEI plate on the other. This allows you to choose which side you would like to use. The print bed is also magnetic so it can easily be used on magnetic surfaces. With the use of clamps, the plate can also be used on a non-magnetic surface. The flexibility of the board allows you to quickly and easily remove your 3D prints. This print bed is 256mm x 256mm and suitable for Bambu Lab 3D printers.

Specifications

Brand:	123-3D	Our item no:	DAR01381
Dimensions:	256 x 256 mm

€31.50

€25.61 Excl. 23% VAT

In stock

Bambu Lab Rear Metal Panel - P1 Series

Zoom in

Description The Bambu Lab Rear Metal Panel is an original replacement part for Bambu Lab 3D printers. This product is suitable for the P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01278

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€23.50 (coming soon)

€19.11 Excl. 23% VAT

Bambu Lab activate carbon air filter

Zoom in

Description Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points produce much fewer VOCs during printing. These VOCs are absorbed by our activated carbon air filter.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01279

€12.95 (coming soon)

€10.53 Excl. 23% VAT

Bambu Lab AMS First Stage Feeder

Zoom in

Description The AMS First Stage Feeder is specially designed to support the AMS for printing multiple colours and materials.

Each AMS has 4 first stage feeders, and each first stage feeder has its own motor and gears to actively push the filament forward or wind it back to the spool.

The first stage feeder has a sensor to detect filament. When a filament is inserted, the first stage feeder will pull the filament automatically. When a filament needs to be winded back, the first stage feeder will drive the AMS driving sleeve to rotate the spool for filament winding.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01285

€59.50

€48.37 Excl. 23% VAT

In stock

Bambu Lab AMS Hub

Zoom in

Description The AMS Hub is used to expand the number of AMS connected to Bambu X1/P1 series printers from 1 AMS unit (4 channels) to a maximum of 4 AMS units (16 channels) to improve the refueling speed across your multiple AMS units and support the redundancy of a buffered signal.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01286

€70.50

€57.32 Excl. 23% VAT

EU warehouse

Bambu Lab AMS Internal Hub Unit

Zoom in

Description The AMS Internal Hub Unit is specially designed for Bambu AMS. The AMS internal hub unit is used to select particular filaments in AMS and convey filaments from AMS to the printer. It also has the functions of speed measurement (filament conveyance) and filament detection.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01287

€79.50 (coming soon)

€64.63 Excl. 23% VAT

Bambu Lab AMS Internal Hub Motor

Zoom in

Description The AMS Internal Hub Motor is used to provide energy for the operation of the AMS internal hub unit.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01288

€59.50

€48.37 Excl. 23% VAT

In stock

Bambu Lab Auxiliary Part Cooling Fan - X1 Series and P1 Series

Zoom in

Description The Bambu Lab Auxiliary Part Cooling Fan helps dissipate extra heat. In cooperation with a housing, this part ensures that you can print at high speed. Because the cooling fan is made of high-quality material, there are minimal vibrations. This product is suitable for the X1 and P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01290

€43.50

€35.37 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series Complete Hotend Assembly with hardened steel nozzle, 0.4mm

Zoom in

Description The 0.4mm nozzle is widely recognised as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilised in both the Bambu Lab X1 Series and P1 Series 3D printers.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DAR01292
Material:	Steel	Screwthread type:	-

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€49.50

€40.24 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series Complete Hotend Assembly with hardened steel nozzle, 0.6mm

Zoom in

Description This 0.6mm nozzle extrudes more filaments per second, resulting in faster print speed. This nozzle size is utilised in both the Bambu Lab X1 Series and P1 Series 3D printers.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DAR01293
Material:	Steel	Screwthread type:	-

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€49.50

€40.24 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series Complete Hotend Assembly with hardened steel nozzle, 0.8mm

Zoom in

Description This complete Hotend Assembly with Hardened Steel Nozzle is ideal for your P1 series 3D printer from Bambu Lab. Easily print materials such as PLA, PETG, ABS, TPU and PC with this construction that can handle up to 300 °C. The 0.8mm nozzle has a higher print speed thanks to the larger diameter. This construction is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DAR01294
Material:	Steel	Screwthread type:	-

Nozzle diameter:

0.4 mm

0.6 mm

0.8 mm

€49.50

€40.24 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series Complete Hotend Assembly with Stainless Steel Nozzle, 0.2mm

Zoom in

Description This complete Hotend Assembly with Stainless Steel Nozzle is ideal for your P1 series 3D printer from Bambu Lab. Easily print materials such as PLA, PETG, ABS, TPU and PC with this construction that can handle up to 300 °C. The 0.2 mm nozzle is perfect for making very detailed prints because the narrow diameter allows a thin layer of filament to pass through. This construction is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR01298
Material:	Stainless steel	Screwthread type:	-

€49.50

€40.24 Excl. 23% VAT

In stock

Bambu Lab filament buffer

Zoom in

Description This filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with 3mm pitch with snap terminal input, 6-Pin cable with 3mm pitch open snap terminal output.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01304

€49.50

€40.24 Excl. 23% VAT

In stock

Bambu Lab Glass Cover

Zoom in

Description The P1 series and X1C use the same specification of glass cover plate, which is suitable for both P1P and P1S. It is recommended to use the glass cover plate when installing the side panels to avoid the glass cover plate from slipping.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01308

€42.50

€34.55 Excl. 23% VAT

In stock

Bambu Lab High Temperature Plate (Smooth PEI)

Zoom in

Description The Bambu Lab High Temperature Plate (Smooth PEI) is intended to serve as a replacement sheet for your High-Temperature Plate. This sheet has an adhesive side that makes it simple to attach and adhere to the plate surface.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01313

€44.50 (coming soon)

€36.18 Excl. 23% VAT

Bambu Lab Hotend with stainless steel nozzle, 0.2mm

Zoom in

Description This 0.2mm nozzle extrudes thin filament for high resolution on the horizontal print surface.

Specifications

Brand:	Bambu Lab	Nozzle diameter:	0.2 mm
Filament diameter:	1.75 mm	Our item no:	DAR01317
Material:	Stainless steel	Screwthread type:	-

€22.75

€18.50 Excl. 23% VAT

In stock

Bambu Lab Cable Tray Assembly

Zoom in

Description With this Bambu Lab Cable Tray Assembly you can keep cables out of the way. This prevents the cables from being damaged due to multiple bending due to movement. This product is suitable for the X1 and P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01319

€15.50

€12.60 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series Room Camera & LED

Zoom in

Description The Room Camera & LED from Bambu Lab is an upgrade part for your 3D printer. This camera can take a timelapse video of the inside of your 3D printer while you are printing. The LED light can illuminate the inside of the 3D printer or an indoor camera. This product is only suitable for the P1 series from Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01321

€40.50

€32.93 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series hotend ceramic heater & thermistor (3-pack)

Zoom in

Description The ceramic heater and thermistor for Bambu Lab P1P 3D printer are combined into one module with an integrated terminal connector. With this design, the reliability of the terminal connector under extreme conditions is improved.

The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01323

€34.50

€28.05 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series hotend cooling fan

Zoom in

Description This hotend cooling fan is used to cool and reduce the temperature of the ceramic heater. The cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit attempts to restart in 2 to 6 seconds. There is no damage after 72 hours of locking. The cooling fan is a high-speed rotating part, so do not touch it while it is running.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01326

€17.50

€14.23 Excl. 23% VAT

EU warehouse

Bambu Lab Left Plastic Panel - P1 Series

Zoom in

Description This Bambu Lab Left Plastic Panel is an original replacement part. Install the panel on the left side of your 3D printer. This product is only suitable for the P1 series of Bambu Lab.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01329