Temperature regulation

E3D heater cartridge | 12V, 30W DED00142

Description With this original ceramic E3D 12V heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 100cm.

Specifications

Brand:	E3D	Power rating:	30 W
Cable length:	100 cm	Our item no:	DED00142
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	20 mm

€11.00

€8.94 Excl. 23% VAT

EU warehouse

E3D heater cartridge | 12V, 40W

Zoom in

Description With this original E3D 12V heating element (ceramic) you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00259
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	20 mm

Order now, we can ship this today!

€15.00

€12.20 Excl. 23% VAT

In stock

E3D heater cartridge | 24V, 40W

Zoom in

Description With this original E3D 24V heating element (ceramic) you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00260
Cartridge diameter:	6 mm	Voltage:	24 v
Cartridge length:	20 mm

Order now, we can ship this today!

€14.00

€11.38 Excl. 23% VAT

In stock

E3D high precision ceramic heater cartridge | 12V, 30W

Zoom in

Description This E3D high precision heater cartride of 12V and 30W is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm, making it compatible with many hot ends. The heater cartridge is equipped with a molex microfit 3.0 connector and has a total cable length of 100cm.

Specifications

Brand:	E3D	Colour:	green
Cable length:	100 cm	Power rating:	30 W
Cartridge diameter:	6 mm	Our item no:	DED00158
Cartridge length:	20 mm	Voltage:	12 v

€24.75

€20.12 Excl. 23% VAT

EU warehouse

E3D high precision ceramic heater cartridge | 24V, 30W

Zoom in

Specifications

Brand:	E3D	Colour:	green
Cable length:	100 cm	Power rating:	30 W
Cartridge diameter:	6 mm	Our item no:	DED00159
Cartridge length:	20 mm	Voltage:	24 v

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€24.75 (coming soon)

€20.12 Excl. 23% VAT

E3D high precision ceramic heater cartridge | 12V, 40W

Zoom in

Description This E3D high precision heater cartridge of 12 volts/40 watts is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm, making it compatible with many hotends. The heater cartridge is equipped with a molex microfit 3.0 connector and has a total cable length of 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00261
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	20 mm

€24.75

€20.12 Excl. 23% VAT

EU warehouse

E3D high precision ceramic heater cartridge | 24V, 40W

Zoom in

Description This E3D high precision heater cartridge of 24 volts/40 watts is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm, making it compatible with many hotends. The heater cartridge is equipped with a molex microfit 3.0 connector and has a total cable length of 100cm.

Specifications

Brand:	E3D	Power rating:	40 W
Cable length:	100 cm	Our item no:	DED00262
Cartridge diameter:	6 mm	Voltage:	24 v
Cartridge length:	20 mm

€24.75

€20.12 Excl. 23% VAT

EU warehouse

Bondtech HeatLink heater cartridge 12V, 50W

Zoom in

Description The Bondtech 12V 50W Heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 12v 50W Heater is compatible with most 3D printer Hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Brand:	Bondtech	Our item no:	DBO00064
Power rating:	50 W	Voltage:	12 v

€14.00

€11.38 Excl. 23% VAT

EU warehouse

E3D high temperature ceramic heater cartridge | 12V, 65W

Zoom in

Description This E3D high temperature heater cartridge of 12 volts/65 watts is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm.

The heater cartridge is capable of reaching temperatures of no less than 550°C, which means that a copper heater block is required.

In combination with the E3D copper Nozzle or E3D Nozzle X you have a hotend that is ideal for filaments such as PEEK or PEI.

Specifications

Brand:	E3D	Max operating temp:	550 °C
Cable length:	200 cm	Power rating:	65 W
Cartridge diameter:	6 mm	Our item no:	DED00263
Cartridge length:	20 mm	Voltage:	12 v

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Bondtech HeatLink heater catridge 24V, 50W

Zoom in

Description The Bondtech 24V 50W Heater is a heating element capable of delivering faster and more consistent high temperatures. Thanks to the long wire and a 6mm outer diameter resistor, the Bondtech 24v 50W Heater is compatible with most 3D printer Hotends. Furthermore, the heater is equipped with a molex-fit 3.0 female connector and the wires are protected by braided nylon.

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Brand:	Bondtech	Our item no:	DBO00063
Power rating:	50 W	Voltage:	24 v

€14.00

€11.38 Excl. 23% VAT

EU warehouse

E3D high temperature ceramic heater cartridge | 24V, 65W

Zoom in

Description This 24 volt/65 watt E3D high temperature heater cartridge is the latest version of the E3D heating line. This heating element has a diameter of 6mm and a length of 20mm.

The heater cartridge is capable of reaching temperatures of no less than 550°C, which means that a copper heater block is required.

In combination with the E3D copper Nozzle or E3D Nozzle X you have a hotend that is ideal for filaments such as PEEK or PEI.

Specifications

Brand:	E3D	Max operating temp:	550 °C
Cable length:	200 cm	Power rating:	65 W
Cartridge diameter:	6 mm	Our item no:	DED00264
Cartridge length:	20 mm	Voltage:	24 v

€97.50

€79.27 Excl. 23% VAT

EU warehouse

E3D Super Volcano ceramic heater cartridge | 12V, 80W | 100cm

Zoom in

Description With this original E3D 12V ceramic heating element for the Super Volcano you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 100cm.

NB! This heater cartridge can use a maximum of 8A. Do not connect it directly to your electronics. Use the supplied MOSFET module.

For connection, please refer to the E3D Super Volcano Assembly.

Specifications

Brand:	E3D	Outer diameter:	6 mm
Cable length:	100 cm	Power rating:	80 W
Cartridge length:	47.5 mm	Our item no:	DED00161
Colour:	black	Voltage:	12 v
Max current:	8 A

€21.75

€17.68 Excl. 23% VAT

EU warehouse

E3D Revo CR HeaterCore 24V

Zoom in

Description The E3D Revo CR HeaterCore is a 40W 24V heating element that can be easily exchanged with the E3D tool-free exchange system. The heater core is connected to the cold end via a spring and comes with a spring and a sock.

Specifications

Brand:	E3D	Our item no:	DAR00762
Max temp:	300 °C	Voltage:	24 v
Power rating:	40 W

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D Revo CR HeaterCore 12V

Zoom in

Description The E3D Revo CR HeaterCore is a 40W 12V heating element that can be easily exchanged with the E3D tool-free exchange system. The heater core is connected to the cold end via a spring and comes with a spring and a sock.

Specifications

Brand:	E3D	Our item no:	DAR00761
Max temp:	300 °C	Voltage:	12 v
Power rating:	40 W

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€35.00 (coming soon)

€28.46 Excl. 23% VAT

E3D Prusa MK3 specific heater cartridge | 24V, 40W

Zoom in

Description The E3D Prusa Specific Heater Cartridge is a 24v 40W heating element that is compatible with the Prusa MK3, MK3S and V6 Hot end set. The maximum temperature that can be reached is 285 celcius and installation is easy by simply sliding the heating element into the heating block and screwing it on.

Specifications

Brand:	E3D	Our item no:	DED00257
Power rating:	40 W	Voltage:	24 v

€14.00

€11.38 Excl. 23% VAT

EU warehouse

E3D Prusa MK2/MK3 specific thermistor

Zoom in

Description The E3D Prusa specific thermistor has a maximum temperature of 300 Celsius and is equipped with a molex microfit 3.0 connector. The cartridge comes with a 1m long connection cable. The thermistor has a diameter of 3mm and a length of 15mm.

Specifications

Brand:	E3D	Our item no:	DED00258
Max temp:	300 °C

€10.00

€8.13 Excl. 23% VAT

EU warehouse

Ceramic heater cartridge 12V/30W, 100cm

Zoom in

Description With this 12V ceramic heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end.

Click here for more information about the adjustment.

Specifications

Brand:	123-3D	Power rating:	30 W
Cable length:	100 cm	Our item no:	DTH00015
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	20 mm

€5.95

€4.84 Excl. 23% VAT

EU warehouse

Ceramic heater cartridge | 12V, 40W | 100cm

Zoom in

Description With this 12V ceramic heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 100cm.

NB:
The heater cartridge heats up very quickly and will cause a temperature overshoot with the wrong settings.
Use the following PID settings in the Marlin firmware:
#define DEFAULT_Kp 45.0
#define DEFAULT_Ki 4.2
#define DEFAULT_Kd 120

Click here for more information about the adjustment.

Specifications

Brand:	123-3D	Colour:	red
Cable length:	100 cm	Power rating:	40 W
Cartridge diameter:	6 mm	Our item no:	DTH00018
Cartridge length:	23 mm	Voltage:	12 v

€6.95

€5.65 Excl. 23% VAT

EU warehouse

Ceramic heater cartridge | 12V, 40W | 150cm

Zoom in

Description With this 12V ceramic heating element you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hot end. The cable length is 150cm.

NB:
The heater cartridge heats up very quickly and will cause a temperature overshoot with the wrong settings.

Use the following PID settings in the Marlin firmware:
#define DEFAULT_Kp 45.0
#define DEFAULT_Ki 4.2
#define DEFAULT_Kd 120

Click here for more information about the adjustment.

Specifications

Brand:	123-3D	Power rating:	40 W
Cable length:	150 cm	Our item no:	DTH00007
Cartridge diameter:	6 mm	Voltage:	12 v
Cartridge length:	23 mm

Order now, we can ship this today!

€6.50

€5.28 Excl. 23% VAT

In stock

Ceramic heater cartridge 24V/40W, 150cm

Zoom in

Description With this 24V heating element (ceramic) you no longer need wire wound resistors or nichrome wire. The heater cartridge ensures faster heating of the hotend. The cable length is 150cm .

NB:
The heater cartridge heats up very quickly and will cause a temperature overshoot with the wrong settings.
Use the following PID settings in the Marlin firmware:
#define DEFAULT_Kp 45.0
#define DEFAULT_Ki 4.2
#define DEFAULT_Kd 120

Click here for more information about the adjustment.

Specifications

Brand:	123-3D	Colour:	red
Cable length:	150 cm	Power rating:	40 W
Cartridge diameter:	6 mm	Our item no:	DTH00016
Cartridge length:	20 mm	Voltage:	24 v

Order now, we can ship this today!

€6.25

€5.08 Excl. 23% VAT

In stock

Slice Engineering thermistor cartridge, 300°C

Zoom in

Description This original Mosquito thermistor cartridge from Slice Engineering is suitable for measuring ambient and printer temperatures up to 300°C.

Specifications

Brand:	Slice Engineering	Max temp:	300 °C
Cartridge diameter:	3 mm	Our item no:	DSE00009
Cartridge length:	200 cm

€35.00

€28.46 Excl. 23% VAT

EU warehouse

Bondtech HeatLink Thermistor 300C

Zoom in

Description With this Heatlink Thermistor you are able to read temperatures up to 300 degrees Celsius.

The Thermistor can be used in combination with the following two heat links:

To connect to the printer, you can order the correct adapter for your printer below:

Specifications

Brand:	Bondtech	Our item no:	DBO00062
Cable length:	150 cm	Video instructions:	Instructional video
Max temp:	300 °C

€15.00

€12.20 Excl. 23% VAT

EU warehouse

Thermistor 100K pre-shrunk with connector, 1m

Zoom in

Description With this fast-responding 100K thermistor you can take accurate temperature measurements up to a maximum of 250°C.

The compact thermistor is neatly concealed in a piece of fiberglass and equipped with a pre-shrunk cable of 1 metre. The cable is heat resistant (up to 280°C) so that the thermistor functions perfectly when using ABS and PLA filament. The thermistor is equipped with a Molex connector that you can use to connect to Minitronics or Megatronics.

Thermistor brand is: EPCOS
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Brand:	123-3D	Mounting:	TH
Length:	1 m	Probe diameter:	0.15 mm
Max power:	18 mw	Probe length:	40 mm
Max temp:	260 °C	Our item no:	DTH00002

Order now, we can ship this today!

€6.95

€5.65 Excl. 23% VAT

In stock

Thermistor 100K pre-shrunk with connector, 2m

Zoom in

Specifications

Brand:	123-3D	Mounting:	TH
Length:	2 m	Probe diameter:	0.15 mm
Max power:	18 mw	Probe length:	40 mm
Max temp:	260 °C	Our item no:	DTH00030

Order now, we can ship this today!

€7.95

€6.46 Excl. 23% VAT

In stock

Thermistor 100K

Zoom in

Description With the standard thermistor 100K you can perform very stable temperature measurements (up to 250°C). Thanks to its very fast response time and compact size, the thermistor is pleasant to use. This thermistor is placed in a glass casing and can be used at the hot end or the heated bed of your 3D printer.

Downloads: Datasheet

Thermistor brand is: EPCOS
Thermistor type is: B57540G0104J
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

Specifications

Brand:	123-3D	Sensitivity index:	4066K
Max power:	18 mw	Thermal coefficient:	4.5 perc/°c
Mounting:	TH	Thermal time constant:	3 S
Probe diameter:	0.8 mm	Tolerance:	5
Our item no:	DTH00001

Order now, we can ship this today!

€4.25

€3.46 Excl. 23% VAT

In stock

Thermocouple type K cartridge, 1m

Zoom in

Description With the thermocouple type K cartridge you can achieve very accurate temperature measurements. The cable is 1 metre long and equipped with fork terminals for easy connection. The cartridge has a diameter of 3mm and a length of 15mm. The thermocouple is compatible with the cartridge heater block from E3D.

Note: the thermocouple type K must be supported by the electronics of the 3D printer.

Specifications

Brand:	123-3D	Length:	1 m
Cartridge diameter:	3 mm	Our item no:	DTH00006
Cartridge length:	15 mm	Thermocouple type:	thermocouple type k

€14.50

€11.79 Excl. 23% VAT

EU warehouse

E3D thermistor cartridge

Zoom in

Description The E3D Thermistor Cartridge is an easy to attach thermistor cartridge for the E3D V6 heaterblocks. The cartridge contains the Semitec 104GT thermistor. The cartridge housing is made of copper and the thermistor is secured with a high quality thermally conductive ceramic adhesive.

The cartridge comes with a cable with connector.

For the Marlin firmware you need the following setting:
#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Max temp:	280 °C
Cable length:	100 cm	Our item no:	DED00069
Diameter:	3 mm

€11.00

€8.94 Excl. 23% VAT

EU warehouse

E3D semitec thermistor incl. sleeving 100k Ohm

Zoom in

Description This 100k thermistor is supplied with fiberglass insulation.

For the Marlin firmware you need the following setting:

#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Our item no:	DED00054
Max temp:	300 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€6.95 (coming soon)

€5.65 Excl. 23% VAT

E3D fibreglass sleeve, 9cm

Zoom in

Description This piece of fibreglass insulation sleeving is suitable for thin wire. The outer diameter of the sleeving is 1mm and the inner diameter is 0.25mm.

Specifications

Brand:	E3D	Outer diameter:	1 mm
Inner diameter:	0.2 mm	Our item no:	DED00073
Length:	9 cm

€2.75

€2.24 Excl. 23% VAT

EU warehouse

W1209 Thermostat with sensor 12V, 10A

Zoom in

Description This thermostat plate is ideal for controlling a standalone heated bed. The board comes with a 10K thermistor and has a temperature range of -50°C to 110°C.

A long press on the Set button takes you to the menu of the thermostat. Below are the options of the menu:

Code	Description	Range	Factory setting
P0	heating / cooling	C / H	C
P1	hysteresis	0.1 - 15	2
P2	max temperature	110	110
P3	min. temperature	-50	-50
P4	temperature correction	-7 ~ +7	0
P5	start delay	0-10 min	0
P6	high temperature alarm	0 - 110	OFF

You can load the factory settings by long pressing the + and - key.

Specifications

Brand:	123-3D	Max temp:	110 °C
Height:	17 mm	Our item no:	DHB00018
Length :	48 mm	Voltage:	12 v
Max current:	10 A	Width:	40 mm
Max power:	120 W

Order now, we can ship this today!

€14.50

€11.79 Excl. 23% VAT

In stock

Snapmaker thermistor

Zoom in

Description Snapmaker thermistor for the 3D print module of the Snapmaker 3-in-1.

Specifications

Brand:

Snapmaker

Our item no:

DTH00014

€6.00

€4.88 Excl. 23% VAT

EU warehouse

E3D PT100 sensor cartridge

Zoom in

Description This E3D PT100 sensor cartridge has a 10cm cable with a molex connector. This sensor comes with a molex to dupont cable of 80cm. With an E3D PT100 temperature sensor you can very precisely measure high temperatures up to 400°C. The cartridge has a diameter of 3mm and a length of 15.5mm, making it suitable for use in the E3D V6, Chimera, Lite6 and the Kraken if a heater block is used that is suitable for a sensor cartridge.

The E3D PT100 sensor is not the same as a thermistor. If your electronics are not suitable for the PT100 sensor, you can use the E3D PT100 Amplifier Board .

Specifications

Brand:	E3D	Cartridge length:	15.5 mm
Cable length:	80 cm	Our item no:	DED00155
Cartridge diameter:	3 mm

€35.00

€28.46 Excl. 23% VAT

EU warehouse

E3D PT100 upgrade kit

Zoom in

Description This E3D PT100 upgrade kit is ideal if you want to print special materials that have to be printed at high temperatures. The PT100 sensor from E3D can accurately read temperatures up to 400°C. This set also includes the E3D PT100 Amplifier Board to connect the E3D PT100 sensor to your existing printer electronics.

To use this set, you need to change the temperature sensor type to type 20 in the Marlin firmware.

Specifications

Brand:

E3D

Our item no:

DED00157

€39.50

€32.11 Excl. 23% VAT

EU warehouse

E3D PT100 Amplifier Board

Zoom in

Description This E3D PT100 Amplifier Board allows you to use the E3D PT100 sensor on your 3D Printer electronics. The board amplifies the signal from the PT100 sensor and converts it into a readable signal for your electronics. For correct operation in the Marlin firmware, specify the temperature sensor type 20.

The official E3D documentation can be found here.

Specifications

Brand:	E3D	Our item no:	DED00156
Dimensions:	38 x 28 mm	Thickness:	1.5 mm

€29.50

€23.98 Excl. 23% VAT

EU warehouse

External thermocouple board v1.2

Zoom in

Description This external thermocouple board is compatible with various electronics (including Megatronics and Ramps) and offers a solution when performing extra temperature measurements.

NOTE: An analog input must be free to connect the thermocouple board.

Advantages:

Easy to install
Very small design (25mm x 25mm)
Compatible with Megatronics and RAMPS.

Specifications

Brand:	123-3D	Our item no:	DRW00053
Dimensions:	12 x 25 x 25 mm

€13.25

€10.77 Excl. 23% VAT

EU warehouse

Ceramic heating element | heater cartridge | 12V/40W, 30cm

Zoom in

Description With this 123-3D ceramic heating element, your hot end will heat up in no time!

Are you planning to upgrade the hot end of your 3D printer or to build a 3D printer yourself? Then this ceramic heater cartridge is the right choice! The heating element has a maximum power of 40W and is compatible with most extruders.

The total cable length is 30cm.

Specifications

AWG:	22 awg	Length:	20 mm
Brand:	123-3D	Outer diameter:	6 mm
Cable length:	30 cm	Power rating:	40 W
Colour:	red	Our item no:	DTH00022
Current rating:	3.2 A	Voltage:	12 v

€5.00

€4.07 Excl. 23% VAT

EU warehouse

Ceramic heater cartridge | 12V, 40W | 200cm

Zoom in

Specifications

AWG:	22 awg	Outer diameter:	6 mm
Brand:	123-3D	Power rating:	40 W
Cable length:	200 cm	Our item no:	DTH00020
Colour:	red	Tolerance:	10
Current rating:	3.33 A	Voltage:	12 v
Length:	20 mm

€8.75

€7.11 Excl. 23% VAT

EU warehouse

Ceramic heating element | heater cartridge | 12V/40W, 30cm

Zoom in

Description With this 123-3D ceramic heating element, your hot end will be up to temperature in no time!

Are you planning to upgrade the hot end of your 3D printer or to build a 3D printer yourself? Then this ceramic heater cartridge is the right choice! The heating element has a maximum power of 40W and is compatible with most extruders.

The total cable length is 30cm.

Specifications

AWG:	22 awg	Length:	20 mm
Brand:	123-3D	Outer diameter:	6 mm
Cable length:	30 cm	Power rating:	40 W
Colour:	black	Our item no:	DTH00021
Current rating:	3.2 A	Voltage:	12 v

€5.00

€4.07 Excl. 23% VAT

EU warehouse

Ceramic heating element | heater cartridge | 24V/40W, 100cm

Zoom in

Specifications

Brand:	123-3D	Outer diameter:	6 mm
Cable length:	100 cm	Power rating:	40 W
Colour:	black	Our item no:	DTH00025
Current rating:	1.67 A	Resistance tolerance:	10
Length:	20 mm	Voltage:	24 v

Order now, we can ship this today!

€6.75

€5.49 Excl. 23% VAT

In stock

Ceramic heating element | heater cartridge | 24V/40W, 30cm

Zoom in

Specifications

AWG:	22 awg	Outer diameter:	6 mm
Brand:	123-3D	Power rating:	40 W
Cable length:	30 cm	Our item no:	DTH00026
Colour:	black	Voltage:	24 v
Current rating:	1.6 A	Width:	20 mm

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Semitec thermistor 100K NTC 104NT4R025H42G

Zoom in

Description With this 100K thermistor you can perform very stable temperature measurements ranging from -50°C to 300°C!

The thermistor comes with a high-quality glass coating and has a superior response speed. Ideal for use in combination with your hot end or heated bed! In addition, thanks to its compact size, it is very pleasant to use.

Thermistor brand is: Semitec
Thermistor type is: 104NT4R025H42G
Marlin firmware thermistor type: #define TEMP_SENSOR_0 1

NOTE: This thermistor requires an electronics board with a free analog input and 4K7 Ohm pull-up resistor.

Specifications

Brand:	123-3D	Our item no:	DTH00028
Max temp:	300 °C	Resistance tolerance:	3
Outer diameter:	0.8 mm

€4.00

€3.25 Excl. 23% VAT

EU warehouse

Dyze thermistor with Molex connector 500°C

Zoom in

Description With this Dyze thermistor you can take accurate temperature measurements up to 500°C!

The thermistor features a Molex connector and an M5 thread for easy attachment of your Dyze hot end. The cable is provided with a black shrink tube and has a length of 10.2cm. At a temperature of 20°C the resistance is 5.2 MΩ and at 400°C it is 250 Ω.

CAUTION: Please update your firmware before getting started with this thermistor.

Specifications

Brand:	Dyze Design	Our item no:	DYZ00009
Cable length:	10 cm	Resistance tolerance:	500 °C

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Dyze PT100 temperature sensor

Zoom in

Description Measure temperatures up to 400°C with this PT100 temperature sensor from Dyze.

This thermistor from Dyze has been specially developed for the DyzEnd-X hot end and can easily be mounted in the heatblock thanks to the M5 screw thread. The cable has a length of 10cm and is equipped with a Molex connector of 15 x 5mm.

PLEASE NOTE: you must order the corresponding Dyze amplifier board separately.

Specifications

Brand:	Dyze Design	Max temp:	400 °C
Cable length:	10 cm	Our item no:	DYZ00014
Connector A:	Molex 2 pin female	Screwthread type:	M5

€30.50

€24.80 Excl. 23% VAT

EU warehouse

Creality 3D CR-X Hotend Thermistor 100K | 60cm cable with connector

Zoom in

Description This Creality 3D hotend thermistor has a cable length of 60cm and is suitable for replacing the hotend thermistor of the following Creality printer models: CR-10S Pro, CR-X and the CR-10 V2. But it can also be used for other printers that use a 100K temperature sensor.

Specifications

Brand:	Creality 3D	Our item no:	DAR00043
Cable length:	60 cm

€8.50

€6.91 Excl. 23% VAT

EU warehouse

Creality 3D CR-10S Pro / CR-X heater cardridge with connector | 24V, 40W | 60cm

Zoom in

Description Original Creality 3D heater cartridge suitable for the CR-10S Pro and the CR-X 3D Printers.

Specifications

Brand:	Creality 3D	Power rating:	40 W
Cable length:	60 cm	Our item no:	DAR00044
Cartridge diameter:	6 mm	Voltage:	24 v
Cartridge length:	20 mm

€8.25

€6.71 Excl. 23% VAT

EU warehouse

PT100 temperature sensor with cartridge

Zoom in

Description This PT100 sensor has a high accuracy and must be used in combination with a PT100 daughterboard from, for example, E3D or Duet. The sensor can measure temperatures up to 400°C, which makes it extremely suitable for printing filaments such as Nylon and Polycarbonate. At 0°C this sensor gives a resistance value of 100 Ohms.

Specifications

Brand:	123-3D	Our item no:	DAR00133
Diameter:	3 mm	Resistance:	100

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

€13.95 (coming soon)

€11.34 Excl. 23% VAT

GEEETECH thermistor for A10, A20, A30 series

Zoom in

Description The GEEETECH thermistor is a reliable NTC temperature sensor used to accurately measure the temperature of the hot end or heating bed in GEEETECH 3D printers. Thanks to its high sensitivity and standard connector, this thermistor is easy to install and compatible with a wide range of GEEETECH models.

Key features:

NTC 100K thermistor for precise temperature measurement
Compatible with GEEETECH A10, A20, A30 series
Standard 2-pin JST connector for easy connection

Specifications

Brand:

Geeetech

Our item no:

DAR00670

Order now, we can ship this today!

€6.95

€5.65 Excl. 23% VAT

In stock

GEEETECH thermistor with cable for Prusa i3 Pro B 3D Printer, 70cm

Zoom in

Description Original Geeetech hotend thermistor to replace a defective thermistor on the i3 Pro B printer. The cable length is 70cm and is equipped with a 2 pin connector.

Specifications

Brand:	Geeetech	Our item no:	DAR00685
Cable length:	70 cm

€7.50

€6.10 Excl. 23% VAT

EU warehouse

E3D PT1000 temperature sensor incl. cable

Zoom in

Description The E3D PT1000 temperature sensor is a meter that can accurately measure temperatures up to a maximum of five hundred degrees Celsius. The PT1000 is also equipped with a 50mm long black cable and a Molex Microfit 3.0 connection. Additionally, the cartridge comes with a 1 metre long extension cable.

Specifications

Brand:	E3D	Cartridge length:	15 mm
Cable length:	50 cm	Max temp:	500 °C
Cartridge diameter:	3 mm	Our item no:	DAR00927

€24.50

€19.92 Excl. 23% VAT

EU warehouse

Flsun V400 hot end thermistor

Zoom in

Description Replace your thermistor with this Flsun hotend thermistor. This is an original replacement part for Flsun V400 3D printers.

Specifications

Brand:

Flsun

Our item no:

DAR01005

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Flsun V400 heater cartridge | 24V, 60W

Zoom in

Description Replace your old heater with this Flsun heater cartridge. The heater cartridge works on 24 volts and 60 watts and is an original replacement part for Flsun V400 3D printers.

Specifications

Brand:	Flsun	Our item no:	DAR01006
Power rating:	60 W	Voltage:	24 v

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Flsun SR/Q5 hotend thermistor

Zoom in

Description This original Flsun SR/Q5 hotend thermistor has a cable length of 18cm and is an original replacement part for Flsun 3D printers.

Specifications

Brand:	Flsun	Max temp:	300 °C
Cable length:	18 cm	Our item no:	DAR01015

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Plus) NTC 100kΩ thermistor

Zoom in

Description Replace your old thermistor of your Creality Ender-3 S1 or Ender-3 S1 Plus with this original Creality NTC 100kΩ thermistor.

Specifications

Brand:

Creality 3D

Our item no:

DAR01047

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Creality 3D Ender-3 S1 (Plus) heater cartridge | 24V, 40W

Zoom in

Description Replace your old heater cartridge of your Creality Ender-3 S1 or Ender-3 S1 Plus with this original Creality heater cartridge of 24 volts and 40 watts.

Specifications

Brand:	Creality 3D	Power rating:	40 W
Diameter:	6 mm	Our item no:	DAR01049
Length:	2 cm	Voltage:	24 v

€8.00

€6.50 Excl. 23% VAT

EU warehouse

Ceramic heater cartridge + Thermistor 100K | 24V, 40W | 1.25m

Zoom in

Description Set of a 24 volt 40 watt heater cartridge with a cable length of 125cm and a 100K thermistor with a 125cm cable pre-crimped with connector.

Specifications

Brand:	123-3D	Power rating:	40 W
Cable length:	125 cm	Our item no:	DAR01192
Mounting:	TH	Voltage:	24 v

€15.75

€12.80 Excl. 23% VAT

EU warehouse

Creality 3D Sprite Extruder ceramic heating kit

Zoom in

Description The Creality 3D Ceramic Heating Kit is ideal for Sprite extruders. The 60W ceramic heating ring heats quickly and efficiently. It heats from 25℃ to 300℃ in just 50 seconds. The design contains both the nozzle and the heating block, resulting in less temperature difference and better stability. In addition, this heating kit is small and lightweight, which works well with sprite extruders. The ceramic heating ring comes with a high-quality copper nozzle and a heat break made of chrome copper and titanium alloy. This results in better heating performance and better printing.

Specifications

Brand:	Creality 3D	Power rating:	60 W
Max temp:	300 °C	Our item no:	DAR01245
Nozzle diameter:	0.4 mm	Temperature sensor:	NSOR_PT3_25E2_S2

€35.50

€28.86 Excl. 23% VAT

EU warehouse

Bambu Lab P1 Series hotend ceramic heater & thermistor (3-pack)

Zoom in

Description The ceramic heater and thermistor for Bambu Lab P1P 3D printer are combined into one module with an integrated terminal connector. With this design, the reliability of the terminal connector under extreme conditions is improved.

The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01323

€34.50

€28.05 Excl. 23% VAT

EU warehouse

Bambu Lab X1 series hotend thermistor (3-pack)

Zoom in

Description The thermistor has highly accurate temperature measurement and reliable structural design. It is for use with Bambu Lab complete hotend assembly only.

Specifications

Brand:

Bambu Lab

Our item no:

DAR01350

€21.50

€17.48 Excl. 23% VAT

EU warehouse

Creality 3D CR-M4 Heater Cartridge

Zoom in

Description This Heating Cartridge from Creality 3D is an original replacement part for your 3D printer. The heating cartridge is 70mm long and contains an XH2.54-2P connection. The cartridge is suitable for 24V and 50W. This heater cartridge is compatible with the CR-M4 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Voltage:	24 v
Our item no:	DAR01392	Weight:	0.004 kg

Order now, we can ship this today!

€5.50

€4.47 Excl. 23% VAT

In stock

Creality 3D CR-M4 Thermistor

Zoom in

Description This Creality 3D NTC-0.55K Thermistor is an original replacement part for your 3D printer. The thermistor is 35mm long and contains a PH2.0-2P connection. This is suitable for the CR-M4 3D printer from Creality 3D.

Specifications

Brand:	Creality 3D	Weight:	0.001 kg
Our item no:	DAR01393

€5.50

€4.47 Excl. 23% VAT

EU warehouse

Elegoo Neptune 4 (Pro) Thermistor

Zoom in

Description Original thermistor for the Neptune 4 and 4 Pro, essential for accurate temperature measurement and reliable print quality. Easy installation and guaranteed compatibility.

Specifications

Brand:

Elegoo

Our item no:

DAR01519

€6.50

€5.28 Excl. 23% VAT

EU warehouse

Elegoo Neptune 4 Plus & Max Thermistor

Zoom in

Description Original thermistor for the Neptune 4 Plus and 4 Max, essential for accurate temperature measurement and reliable print quality. Easy installation and guaranteed compatibility.

Specifications

Brand:

Elegoo

Our item no:

DAR01537

€5.95

€4.84 Excl. 23% VAT

EU warehouse

Creality 3D heater cartridge | 24V, 50W

Zoom in

Description This thermistor is an original replacement part from Creality. The thermistor has a temperature resistance of 350℃ and works with 24V and 50W. The part is suitable for the Ender-3 S1 Pro and CR-10 Smart Pro 3D printers from Creality.

Specifications

Brand:	Creality 3D	Our item no:	DAR01583
Power rating:	50 W	Voltage VDC:	24 v/°c

€7.50

€6.10 Excl. 23% VAT

EU warehouse

Prusa Heatbed thermistor set (MK3/S/+, MINI/+)

Zoom in

Description This Prusa Heatbed thermistor set includes the following:

1 x Heatbed thermistor
1 x Kapton tape
1 x Aluminium tape

Specifications

Brand:	Prusa	Our item no:	DAR02404
Cable length:	6.5 cm

Order now, we can ship this today!

€13.61

€11.07 Excl. 23% VAT

In stock

Prusa Heatsink NTC thermistor 100k, 90mm

Zoom in

Description This product is a replacement NTC thermistor for the MK4 Heatsink.

This product includes:

1 x Thermistor NTC 100k - 90mm
1 x Grub screw M3x4

Specifications