Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

123-3D.ie
U29-30 North Park
Dublin D11 TX88

T: 01 963 7043
E: info@123-3D.ie

Customer reviews

Official Reviews.io

Payment options

Lots of popular payment options!

Follow us on social media

Official dealer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Home
3D filament
View by properties
Heat resistant
View all heat resistant filaments

View all heat resistant filaments

REAL blue Low Warp ASA filament 1.75mm, 1kg

REAL blue Low Warp ASA filament 1.75mm, 1kg DFS02012

Description This blue 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	blue	Our item no:	DFS02012
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

In stock

REAL yellow Low Warp ASA filament 1.75mm, 1kg

REAL yellow Low Warp ASA filament 1.75mm, 1kg DFS02021

Description This yellow 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	yellow	Our item no:	DFS02021
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

In stock

REAL grey Low Warp ASA filament 1.75mm, 1kg

REAL grey Low Warp ASA filament 1.75mm, 1kg DFS02013

Description This grey 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	grey	Our item no:	DFS02013
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

REAL green Low Warp ASA filament 1.75mm, 1kg

REAL green Low Warp ASA filament 1.75mm, 1kg DFS02014

Description This green 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	green	Our item no:	DFS02014
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

REAL light green Low Warp ASA filament 1.75mm, 1kg

REAL light green Low Warp ASA filament 1.75mm, 1kg DFS02015

Description This light green 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	light green	Our item no:	DFS02015
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

In stock

REAL neutral Low Warp ASA filament 1.75mm, 1kg

REAL neutral Low Warp ASA filament 1.75mm, 1kg DFS02016

Description This neutral 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	neutral	Our item no:	DFS02016
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

REAL orange Low Warp ASA filament 1.75mm, 1kg

REAL orange Low Warp ASA filament 1.75mm, 1kg DFS02017

Description This orange 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	orange	Our item no:	DFS02017
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

In stock

REAL red Low Warp ASA filament 1.75mm, 1kg

REAL red Low Warp ASA filament 1.75mm, 1kg DFS02018

Description This red 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	red	Our item no:	DFS02018
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

REAL white Low Warp ASA filament 1.75mm, 1kg

REAL white Low Warp ASA filament 1.75mm, 1kg DFS02019

Description This white 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	white	Our item no:	DFS02019
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

In stock

REAL black Low Warp ASA filament 1.75mm, 1kg

REAL black Low Warp ASA filament 1.75mm, 1kg DFS02010

Description This black 1.75mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water-, UV- and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Amount:	1 kg	Material:	ASA Low Warp
Brand:	REAL	Nozzle temp range:	205 - 245 °C
Colour:	black	Our item no:	DFS02010
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55 - 85 °C	Spool width:	7.0 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

REAL Luvocom black 3F PEEK CF 9676 filament 1.75mm, 0.5kg

REAL Luvocom black 3F PEEK CF 9676 filament 1.75mm, 0.5kg DFP12052

Description This high-quality black REAL filament can withstand temperatures up to 260°C. With this sturdy filament, you can print metal replacement parts as the layers adhere well to each other, making the print very strong.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	400 - 450 °C
Colour:	black	Our item no:	DFP12052
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	110 °C	Inner diameter:	Ø 5.5 cm
Length:	165 m	Outer diameter:	Ø 20.0 cm
Material:	PEEK CF 9676	Spool width:	4.5 cm

€375.50

€305.28 Excl. 23% VAT

EU warehouse

REAL Luvocom grey 3F PEEK 9581 filament 1.75mm, 0.5kg

REAL Luvocom grey 3F PEEK 9581 filament 1.75mm, 0.5kg DFP12050

Description This high-quality grey REAL filament can withstand temperatures up to 260°C. With this sturdy filament, you can print metal replacement parts as the layers adhere well to each other, making the print very strong.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	370 - 420
Colour:	grey	Our item no:	DFP12050
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	120 - 160 °C	Inner diameter:	Ø 5.5 cm
Length:	165 m	Outer diameter:	Ø 20.0 cm
Material:	PEEK	Spool width:	4.5 cm

€314.50

€255.69 Excl. 23% VAT

EU warehouse

REAL Luvocom neutral 3F PEKK filament 1.75mm, 0.5kg

REAL Luvocom neutral 3F PEKK filament 1.75mm, 0.5kg DFP12054

Description This high-quality neutral REAL filament is fire retardant and has excellent thermal, chemical and abrasion resistance. With this filament, you can make resistant parts with low smoke toxicity. The filament can be exposed to temperatures up to 300ºC for a short time or 255ºC for a longer time.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	320 - 360 °C
Colour:	neutral	Our item no:	DFP12054
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	110 °C	Inner diameter:	Ø 5.5 cm
Length:	165 m	Outer diameter:	Ø 20.0 cm
Material:	PEKK	Spool width:	4.5 cm

€349.50

€284.15 Excl. 23% VAT

EU warehouse

REAL neutral PEI Ultum 1010 filament 1.75mm, 0.5kg

REAL neutral PEI Ultum 1010 filament 1.75mm, 0.5kg DFP12056

Description This neutral REAL filament combines excellent thermal properties, exceptional stability, flame retardancy and good chemical resistance in one high-quality 3D filament. The filament has a glass transition temperature of 217ºC and can withstand continuous temperatures up to 170ºC.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	350 - 380 °C
Colour:	neutral	Our item no:	DFP12056
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	120 - 160 °C	Inner diameter:	Ø 5.5 cm
Length:	165 m	Outer diameter:	Ø 20.0 cm
Material:	PEI ULTEM	Spool width:	4.5 cm

€137.50

€111.79 Excl. 23% VAT

In stock

REAL neutral PEI Ultum 9085 filament 1.75mm, 0.5kg

REAL neutral PEI Ultum 9085 filament 1.75mm, 0.5kg DFP12058

Description This high-quality neutral REAL filament is fire retardant. The filament has a glass transition temperature of 186°C and print temperature between 350°C and 390°C. With this filament you can make resistant parts with low smoke toxicity.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	350 - 380 °C
Colour:	neutral	Our item no:	DFP12058
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	120 - 160 °C	Inner diameter:	Ø 5.5 cm
Length:	165 m	Outer diameter:	Ø 20.0 cm
Material:	PEI ULTEM	Spool width:	4.5 cm

€157.50

€128.05 Excl. 23% VAT

EU warehouse

REAL neutral PPSU filament 1.75mm, 0.5kg

REAL neutral PPSU filament 1.75mm, 0.5kg DFP12060

Description This PPSU (polyphenylsulfone) is a strong filament with a glass transition temperature of 220°C. Parts of this material can withstand temperatures up to 180°C. This makes this filament very suitable for solutions around an engine or cylinder block. Parts of this filament are also suitable for steam sterilisation with EtO gas, making medical applications possible with this filament.

Specifications

Amount:	0.5 kg	Max deviation:	+mn ± 0.05 mm
Brand:	REAL	Nozzle temp range:	360 - 400 °C
Colour:	neutral	Our item no:	DFP12060
Filament diameter:	1.75 mm	Roundness:	>95%
Heated bed temp:	140 °C	Inner diameter:	Ø 5.5 cm
Length:	165 m	Outer diameter:	Ø 20.0 cm
Material:	PPSU	Spool width:	4.5 cm

€227.50

€184.96 Excl. 23% VAT

EU warehouse

BASF Ultrafuse neutral ASA filament 1.75mm, 0.75kg

BASF Ultrafuse neutral ASA filament 1.75mm, 0.75kg DFB00038

Description This neutral BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Amount:	0.75 kg	Material:	ASA
Brand:	BASF	Nozzle temp range:	260 - 280 °C
Colour:	neutral	Our item no:	DFB00038
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	100 - 120 °C	Spool width:	5.2 cm

€39.50

€32.11 Excl. 23% VAT

EU warehouse

BASF Ultrafuse neutral PP filament 1.75mm 0.7kg

BASF Ultrafuse neutral PP filament 1.75mm 0.7kg DFB00171

Description This BASF Ultrafuse PP filament (1.75mm) is a high-quality plastic with a low density, high elasticity and high fatigue resistance. The material is neutral in colour and you can print all kinds of creative 3D designs with it.

PP (Polypropylene) is one of the most widely used materials in the world. PP is lightweight, impact resistant and resistant to chemicals and moisture. With PP filament you can print perfect housings, clamps and other objects that can withstand high tension.

Specifications

Amount:	0.7 kg	Nozzle temp range:	230 - 240 °C
Brand:	BASF	Our item no:	DFB00171
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60 - 80 °C	Spool width:	6.0 cm
Material:	PP

€47.50

€38.62 Excl. 23% VAT

In stock

BASF Ultrafuse black PP GF30 filament 1.75mm, 0.75kg

BASF Ultrafuse black PP GF30 filament 1.75mm, 0.75kg DFB00173

Description This black BASF Ultrafuse PP GF30 filament (1.75mm) is a high-quality material, reinforced with 30% glass fibre. With PP GF30 you can print even more robust 3D designs than with regular PP. This material is also heat, chemical, moisture and UV resistant.

PP (Polypropylene) is one of the most widely used materials in the world. PP is lightweight and impact resistant. With PP filament you can print perfect housings, clamps and other objects that can withstand high tension.

The ideal print temperature is 220°C to 240°C. For best results, use a heated bed of 30°C.

Specifications

Amount:	0.7 kg	Material:	PP GF30
Brand:	BASF	Nozzle temp range:	220 - 240 °C
Colour:	black	Our item no:	DFB00173
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20 - 40 °C	Spool width:	5.2 cm

€121.00

€98.37 Excl. 23% VAT

In stock

BASF Ultrafuse neutral PPSU filament 1.75mm, 0.75kg

BASF Ultrafuse neutral PPSU filament 1.75mm, 0.75kg DFB00175

Description The BASF Ultrafuse PPSU filament is suitable for use in aircraft model construction, among other things. The filament has a fire-retardant effect and is resistant to temperatures up to 180°C in the long term and even up to 220°C in the short term. This filament is also resistant to attack by oil or petrol.

Specifications

Amount:	0.75 kg	Nozzle temp range:	390 - 410 °C
Brand:	BASF	Our item no:	DFB00175
Colour:	neutral	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	220 °C	Spool width:	5.2 cm
Material:	PPSU

€277.00

€225.20 Excl. 23% VAT

EU warehouse

ColorFabb natural ASA filament 1.75mm, 0.65kg

ColorFabb natural ASA filament 1.75mm, 0.65kg DFP13000

Description This ColorFabb filament in the colour natural has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance up to 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Amount:	0.65 kg	Material:	ASA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13000
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€25.50

€20.73 Excl. 23% VAT

EU warehouse

ColorFabb black ASA filament 1.75mm, 0.65kg

ColorFabb black ASA filament 1.75mm, 0.65kg DFP13001

Description This ColorFabb filament in the colour black has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance of 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Amount:	0.65 kg	Material:	ASA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13001
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	90 m	Spool width:	5.5 cm

€25.50

€20.73 Excl. 23% VAT

EU warehouse

colorFabb white HT filament 1.75mm, 0.7kg

colorFabb white HT filament 1.75mm, 0.7kg DFP13012

Description This colorFabb filament in white has a diameter of 1.75mm. HT filament is odourless and has good firmness. This type of filament is known for its very high temperature resistance up to 100°C. Compared to other copolyester filaments from colorFabb, you achieve the best mechanical performance with HT filament.

Specifications

Amount:	0.7 kg	Material:	HT
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	white	Nozzle temp range:	250 - 280 °C
Filament diameter:	1.75 mm	Our item no:	DFP13012
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	100 - 120 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

colorFabb black HT filament 1.75mm, 0.7kg

colorFabb black HT filament 1.75mm, 0.7kg DFP13004

Description This colorFabb filament in the colour black has a diameter of 1.75mm. HT filament is odourless and has good firmness. This type of filament is known for its very high temperature resistance up to 100°C. Compared to other copolyester filaments from colorFabb, you achieve the best mechanical performance with HT filament.

Specifications

Amount:	0.7 kg	Material:	HT
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	250 - 280 °C
Filament diameter:	1.75 mm	Our item no:	DFP13004
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	100 - 120 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

ColorFabb natural LW-ASA filament 1.75mm, 0.65kg

ColorFabb natural LW-ASA filament 1.75mm, 0.65kg DFP13016

Description The natural LW-ASA filament from colorFabb has a diameter of 1.75mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96 degrees.

Note: the colour may vary.

Print recommendation: use a heated platform of 90-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Amount:	0.65 kg	Material:	LW-ASA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	natural	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13016
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

ColorFabb black LW-ASA filament 1.75mm, 0.65kg

ColorFabb black LW-ASA filament 1.75mm, 0.65kg DFP13014

Description The black LW-ASA filament from colorFabb has a diameter of 1.75mm. This type is a lightweight ASA filament that consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90-100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Amount:	0.65 kg	Material:	LW-ASA
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	black	Nozzle temp range:	240 - 260 °C
Filament diameter:	1.75 mm	Our item no:	DFP13014
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90 - 100 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

colorFabb black PA NEAT filament 1.75mm, 0.75kg

colorFabb black PA NEAT filament 1.75mm, 0.75kg DFP13261

Description colorFabb PA NEAT filament is colorFabb's new, heat resistant filament made of polyamide (nylon). Even with a temperature of 120°C, a print of this filament can function well. This makes it a perfect material for making professional prints that last longer. PA has excellent mechanical and chemical properties. It is also distinguished by its very low water absorption. With PA NEAT you have a strong filament that does not deform: ideal for functional prints.

Nylon filaments absorb moisture and must be dried thoroughly before printing. This filament has a drying advice of 4 to 6 hours at a temperature of 70 to 80 degrees.

Specifications

Amount:	0.75 kg	Nozzle temp range:	265 - 290 °C
Brand:	colorFabb	Our item no:	DFP13261
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	5.5 cm
Material:	PA NEAT

€64.50

€52.44 Excl. 23% VAT

EU warehouse

eSun neutral ePC filament 1.75mm, 0.5kg

eSun neutral ePC filament 1.75mm, 0.5kg DFE20042

Description eSun's neutral ePC filament has a high toughness and impact resistance and is heat resistant. The material has a heat distortion temperature of up to 115 °C and has a long service life. Use the filament for car parts and electronic, electrical and mechanical objects. This eSun ePC filament has a diameter of 1.75mm.

Specifications

Amount:	0.5 kg	Nozzle temp range:	240 - 270
Brand:	eSun	Our item no:	DFE20042
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 120 °C	Spool width:	6.5 cm
Material:	PCL

Order extras:

KWB Putty knife, 40mm -

€3.95

3DLAC Plus adhesive spray, 100ml -

€7.75

Modifi3D repair/modification tool -

€34.75

Multi-tool set (162-pack) -

€59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) -

€74.50

€42.50

€34.55 Excl. 23% VAT

EU warehouse

Extrudr anthracite grey GreenTEC Pro filament 1.75mm, 0.8kg

Extrudr anthracite grey GreenTEC Pro filament 1.75mm, 0.8kg DFG03028

Description The anthracite grey GreenTEC Pro filament from Extrudr has an excellent bending strength, making it extremely suitable for demanding applications. This filament has a nice matte finish after printing and has virtually no problems with warping during printing.

GreenTEC Pro comes from Extrudr's BIO Performance range of filaments and is biodegradable according to DIN EN ISO 14855.

Some properties of the filament are:

High mechanical and thermal properties
Resistant to temperatures up to 160°C
Alternative to PC, ABS and PEEK filament

Specifications

Amount:	0.8 kg	Material:	GreenTec Pro
Brand:	Extrudr	Nozzle temp range:	190 - 250 °C
Colour:	anthracite	Our item no:	DFG03028
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.3 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 90 °C	Spool width:	5.6 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Extrudr blue GreenTEC Pro filament 1.75mm, 0.8kg

Extrudr blue GreenTEC Pro filament 1.75mm, 0.8kg DFG03014

Description The blue GreenTEC Pro filament from Extrudr has an excellent bending strength, making it extremely suitable for demanding applications. This filament has a nice matte finish after printing and has virtually no problems with warping during printing.

GreenTEC Pro comes from Extrudr's BIO Performance range of filaments and is biodegradable according to DIN EN ISO 14855.

Some properties of the filament are:

High mechanical and thermal properties
Resistant to temperatures up to 160°C
Alternative to PC, ABS and PEEK filament

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 250 °C
Brand:	Extrudr	Our item no:	DFG03014
Colour:	blue	RAL colour no:	5003
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.3 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 90 °C	Spool width:	5.6 cm
Material:	GreenTec Pro

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Extrudr carbon GreenTEC Pro filament 1.75mm, 0.8kg

Extrudr carbon GreenTEC Pro filament 1.75mm, 0.8kg DFG03015

Description This carbon Extrudr's GreenTEC Pro Carbon filament has excellent bending strength, making it extremely suitable for demanding applications. By adding carbon fibers, Extrudr combines the best of two worlds: the unique properties of the GreenTEC Pro filament and the strength of the carbon fibers. The carbon fibers give this filament a nice matte finish after printing.

Some properties of the filament are:

High mechanical and thermal properties
Resistant to temperatures up to 165°C
UV resistant

Tip: For printing carbon filament, we recommend a hardened steel nozzle with a diameter of at least 0.5mm.

Specifications

Amount:	0.8 kg	Nozzle temp range:	200 - 240 °C
Brand:	Extrudr	Our item no:	DFG03015
Colour:	dark grey	RAL colour no:	9017
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.3 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 90 °C	Spool width:	5.6 cm
Material:	GreenTec Pro

€49.50

€40.24 Excl. 23% VAT

In stock

Extrudr neutral GreenTEC Pro filament 1.75mm, 0.8kg

Extrudr neutral GreenTEC Pro filament 1.75mm, 0.8kg DFG03016

Description The GreenTEC Pro filament in neutral from Extrudr has an excellent bending strength, making it extremely suitable for demanding applications. This filament has a nice matte finish after printing and has virtually no problems with warping during printing.

GreenTEC Pro comes from Extrudr's BIO Performance range of filaments and is biodegradable according to DIN EN ISO 14855.

Some properties of the filament are:

High mechanical and thermal properties
Resistant to temperatures up to 160°C
Alternative to PC, ABS and PEEK filament

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 250 °C
Brand:	Extrudr	Our item no:	DFG03016
Colour:	neutral	RAL colour no:	1013
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.3 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 90 °C	Spool width:	5.6 cm
Material:	GreenTec Pro

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Extrudr red GreenTEC Pro filament 1.75mm, 0.8kg

Extrudr red GreenTEC Pro filament 1.75mm, 0.8kg DFG03017

Description The red GreenTEC Pro filament from Extrudr has an excellent bending strength, making it extremely suitable for demanding applications. This filament has a nice matte finish after printing and has virtually no problems with warping during printing.

GreenTEC Pro comes from Extrudr's BIO Performance range of filaments and is biodegradable according to DIN EN ISO 14855.

Some properties of the filament are:

High mechanical and thermal properties.
Resistant to temperatures up to 160°C.
Alternative to PC, ABS and PEEK filament.

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 250 °C
Brand:	Extrudr	Our item no:	DFG03017
Colour:	red	RAL colour no:	3001
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.3 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 90 °C	Spool width:	5.6 cm
Material:	GreenTec Pro

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

Extrudr white GreenTEC Pro filament 1.75mm, 0.8kg

Extrudr white GreenTEC Pro filament 1.75mm, 0.8kg DFG03026

Description The white GreenTEC Pro filament from Extrudr has an excellent bending strength, making it extremely suitable for demanding applications. This filament has a nice matte finish after printing and has virtually no problems with warping during printing.

GreenTEC Pro comes from Extrudr's BIO Performance range of filaments and is biodegradable according to DIN EN ISO 14855.

Some properties of the filament are:

High mechanical and thermal properties
Resistant to temperatures up to 160°C
Alternative to PC, ABS and PEEK filament

Specifications

Amount:	0.8 kg	Material:	GreenTec Pro
Brand:	Extrudr	Nozzle temp range:	190 - 250 °C
Colour:	white	Our item no:	DFG03026
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.3 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 90 °C	Spool width:	5.6 cm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Extrudr silver GreenTEC Pro filament 1.75mm, 0.8kg

Extrudr silver GreenTEC Pro filament 1.75mm, 0.8kg DFG03018

Description The silver-coloured GreenTEC Pro filament from Extrudr has an excellent bending strength, making it extremely suitable for demanding applications. This filament has a nice matte finish after printing and has virtually no problems with warping during printing.

GreenTEC Pro comes from Extrudr's BIO Performance range of filaments and is biodegradable according to DIN EN ISO 14855.

Some properties of the filament are:

High mechanical and thermal properties
Resistant to temperatures up to 160°C
Alternative to PC, ABS and PEEK filament

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 250 °C
Brand:	Extrudr	Our item no:	DFG03018
Colour:	silver	RAL colour no:	9006
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.3 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 90 °C	Spool width:	5.6 cm
Material:	GreenTec Pro

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Extrudr black GreenTEC Pro filament 1.75mm, 0.8kg

Extrudr black GreenTEC Pro filament 1.75mm, 0.8kg DFG03019

Description The black GreenTEC Pro filament from Extrudr has an excellent bending strength, making it extremely suitable for demanding applications. This filament has a nice matte finish after printing and has virtually no problems with warping during printing.

GreenTEC Pro comes from Extrudr's BIO Performance range of filaments and is biodegradable according to DIN EN ISO 14855.

Some properties of the filament are:

High mechanical and thermal properties
Resistant to temperatures up to 160°C
Alternative to PC, ABS and PEEK filament

Specifications

Amount:	0.8 kg	Nozzle temp range:	190 - 250 °C
Brand:	Extrudr	Our item no:	DFG03019
Colour:	black	RAL colour no:	9017
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.3 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 90 °C	Spool width:	5.6 cm
Material:	GreenTec Pro

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Polymaker black PC-PBT filament 1.75mm, 1kg

Polymaker black PC-PBT filament 1.75mm, 1kg DFP14008

Description Polymaker PC-BT filament in black is perfect for industrial applications. PC-PBT is a polymer type and has excellent heat resistance. In addition, it offers good toughness at low temperatures between –30˚C and -20˚C and is perfectly resistant to chemicals. The black filament has a diameter of 1.75mm and a weight of 1kg.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 280 °C
Brand:	Polymaker	Our item no:	DFP14008
Colour:	black	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	100 - 115 °C	Spool width:	6.8 cm
Material:	PC-PBT

€62.50

€50.81 Excl. 23% VAT

EU warehouse

Polymaker PolyLite black ASA filament 1.75mm, 1kg

Polymaker PolyLite black ASA filament 1.75mm, 1kg DFP14054

Description This Polymaker PolyLite black ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14054
Colour:	black	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Polymaker PolyLite black ASA filament 1.75mm, 3kg

Polymaker PolyLite black ASA filament 1.75mm, 3kg DFP14180

Description This black Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	3 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14180
Colour:	black	Spool empty weight:	± 440 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Filament print speed:	-	Outer diameter:	Ø 25.2 cm
Heated bed temp:	75 - 95 °C	Spool width:	11.9 cm
Material:	ASA

€92.50

€75.20 Excl. 23% VAT

EU warehouse

Polymaker PolyLite blue ASA filament 1.75mm, 1kg

Polymaker PolyLite blue ASA filament 1.75mm, 1kg DFP14181

Description This blue Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14181
Colour:	blue	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

In stock

Polymaker PolyLite grey ASA filament 1.75mm, 1kg

Polymaker PolyLite grey ASA filament 1.75mm, 1kg DFP14183

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14183
Colour:	grey	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

In stock

Polymaker PolyLite natural ASA filament 1.75mm, 1kg

Polymaker PolyLite natural ASA filament 1.75mm, 1kg DFP14185

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14185
Colour:	natural	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Polymaker PolyLite natural ASA filament 1.75mm, 3kg

Polymaker PolyLite natural ASA filament 1.75mm, 3kg DFP14186

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	3 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14186
Colour:	natural	Spool empty weight:	± 440 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Filament print speed:	-	Outer diameter:	Ø 25.2 cm
Heated bed temp:	75 - 95 °C	Spool width:	11.9 cm
Material:	ASA

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€92.50 (coming soon)

€75.20 Excl. 23% VAT

Polymaker PolyLite red ASA filament 1.75mm, 1kg

Polymaker PolyLite red ASA filament 1.75mm, 1kg DFP14189

Description This red Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14189
Colour:	red	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

In stock

Polymaker PolyLite white ASA filament 1.75mm, 1kg

Polymaker PolyLite white ASA filament 1.75mm, 1kg DFP14056

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95°C.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14056
Colour:	white	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75 - 95 °C	Spool width:	6.8 cm
Material:	ASA

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Polymaker PolyLite white ASA filament 1.75mm, 3kg

Polymaker PolyLite white ASA filament 1.75mm, 3kg DFP14190

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Amount:	3 kg	Nozzle temp range:	240 - 260 °C
Brand:	Polymaker	Our item no:	DFP14190
Colour:	white	Spool empty weight:	± 440 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Filament print speed:	-	Outer diameter:	Ø 25.2 cm
Heated bed temp:	75 - 95 °C	Spool width:	11.9 cm
Material:	ASA

€92.50

€75.20 Excl. 23% VAT

EU warehouse

Polymaker PolyLite transparent PC filament 1.75mm, 1kg

Polymaker PolyLite transparent PC filament 1.75mm, 1kg DFP14058

Description With Polymaker PolyLite transparent filament you print objects of excellent quality. The filament consists of polycarbonate that has been specially developed for 3D printing. PolyLite has good strength and heat resistance. We recommend a print temperature between 200°C and 230°C. The transparent filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	250 - 270
Brand:	Polymaker	Our item no:	DFP14058
Colour:	transparent	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 105 °C	Spool width:	6.8 cm
Material:	Polycarbonate

€37.50

€30.49 Excl. 23% VAT

In stock

Polymaker PolyMax black PC filament 1.75mm, 0.75kg

Polymaker PolyMax black PC filament 1.75mm, 0.75kg DFP14086

Description This black Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. As a result, the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Amount:	0.75 kg	Nozzle temp range:	250 - 270
Brand:	Polymaker	Our item no:	DFP14086
Colour:	black	Roundness:	>95%
Filament diameter:	1.75 mm	Spool empty weight:	± 125 grams
Filament print speed:	-	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90 - 105 °C	Outer diameter:	Ø 20.0 cm
Material:	Polycarbonate	Spool width:	4.5 cm
Max deviation:	+mn ± 0.05 mm

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Polymaker PolyMax black PC filament 1.75mm, 3kg

Polymaker PolyMax black PC filament 1.75mm, 3kg DFP14088

Description This black Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. As a result, the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Amount:	3 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14088
Colour:	black	Spool empty weight:	± 440 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Filament print speed:	-	Outer diameter:	Ø 25.2 cm
Heated bed temp:	90 - 105 °C	Spool width:	11.9 cm
Material:	Polycarbonate

€174.50

€141.87 Excl. 23% VAT

In stock

Polymaker PolyMax white PC filament 1.75mm, 0.75kg

Polymaker PolyMax white PC filament 1.75mm, 0.75kg DFP14090

Description This white Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. As a result, the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Amount:	0.75 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14090
Colour:	white	Spool empty weight:	± 125 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 105 °C	Spool width:	4.5 cm
Material:	Polycarbonate

€47.50

€38.62 Excl. 23% VAT

EU warehouse

Zortrax pure white Z-ASA Pro filament 1.75mm, 0.8kg

Zortrax pure white Z-ASA Pro filament 1.75mm, 0.8kg DFP00115

Description Create durable prints with this pure white Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The white filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Amount:	0.8 kg	Nozzle temp range:	255 - 265 °C
Brand:	Zortrax	Our item no:	DFP00115
Colour:	pure white	Inner diameter:	Ø 4.4 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Spool width:	5.4 cm
Material:	Z-ASA Pro

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€52.50 (coming soon)

€42.68 Excl. 23% VAT

Polymaker Polymax white PC-FR filament 1.75mm, 1kg

Polymaker Polymax white PC-FR filament 1.75mm, 1kg DFP14365

Description Polymax PC-FR White is a super sturdy, strong and heat resistant filament from Polymaker. The excellent mechanical properties make this filament very useful for various industries such as the automotive and aviation industries. But this filament is also a real asset for private users. The flame retardant properties (V0 in the UL94 test) of this material ensure that it can be used safely at higher temperatures. In addition, it is still very resistant to impact.

Annealing: 2 hours at 90℃

Specifications

Amount:	1 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14365
Colour:	white	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90 - 105 °C	Outer diameter:	Ø 20.0 cm
Material:	PC-FR	Spool width:	6.8 cm

Order extras:

KWB Putty knife, 40mm

€3.95

3DLAC Plus adhesive spray, 100ml

€7.75

Modifi3D repair/modification tool

€34.75

Multi-tool set (162-pack)

€59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack)

€74.50

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€62.50 (coming soon)

€50.81 Excl. 23% VAT

Polymaker Fiberon black PPS-CF10 filament 1.75mm, 0.5kg

Polymaker Fiberon black PPS-CF10 filament 1.75mm, 0.5kg DFP14556

1
0

Description Fiberon PPS-CF10 from Polymaker is a filament reinforced with carbon fibres, making it ideal for 3D prints that need to be used in extreme conditions. The filament has a high heat and chemical resistance, is not sensitive to moisture and has a V0 flame retardant. This product is black, is 1.75mm and comes on a 0.5kg spool.

Please note: we recommend using a wear-resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	0.5 kg	Nozzle temp range:	310 - 350 °C
Brand:	Polymaker	Our item no:	DFP14556
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 90 °C	Spool width:	5.2 cm
Material:	PPS-CF10

€87.50

€71.14 Excl. 23% VAT

EU warehouse

Polymaker grey Fiberon PPS-GF20 filament 1.75mm, 0.5kg

Polymaker grey Fiberon PPS-GF20 filament 1.75mm, 0.5kg DFP14570

1
0

Description With Polymaker Fiberon PPS-GF20, you can print strong, stiff, and heat-resistant parts. This filament is made of polyphenylene sulfide (PPS) with 20% glass fibre and combines high mechanical strength with excellent chemical resistance. The material is also electrically insulating and flame-retardant (UL94 V0), making it ideal for industrial, automotive, and electrical applications. PPS-GF20 offers high dimensional stability with minimal distortion, making it suitable for both functional prototypes and end-use parts.

Please note: We recommend using a wear-resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	0.5 kg	Material:	PPS-CF20
Brand:	Polymaker	Nozzle temp range:	310 - 350 °C
Colour:	grey	Our item no:	DFP14570
Download TDS:	Download	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80 - 90 °C	Spool width:	5.2 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€77.00 (coming soon)

€62.60 Excl. 23% VAT

Polymaker grey Fiberon PPS-GF20 filament 1.75mm, 3kg

Polymaker grey Fiberon PPS-GF20 filament 1.75mm, 3kg DFP14571

1
0

Description With Polymaker Fiberon PPS-GF20, you can print strong, stiff, and heat-resistant parts. This filament is made of polyphenylene sulfide (PPS) with 20% glass fibre and combines high mechanical strength with excellent chemical resistance. The material is also electrically insulating and flame-retardant (UL94 V0), making it ideal for industrial, automotive, and electrical applications. PPS-GF20 offers high dimensional stability with minimal distortion, making it suitable for both functional prototypes and end-use parts.

Please note: We recommend using a wear-resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	3 kg	Nozzle temp range:	310 - 350 °C
Brand:	Polymaker	Our item no:	DFP14571
Colour:	grey	Spool empty weight:	± 440 grams
Download TDS:	Download	Inner diameter:	Ø 5.4 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 25.2 cm
Heated bed temp:	80 - 90 °C	Spool width:	11.9 cm
Material:	PPS-CF20

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€379.00 (coming soon)

€308.13 Excl. 23% VAT

Polymaker black HT-PLA filament 1.75mm, 1kg

Polymaker black HT-PLA filament 1.75mm, 1kg DFP16136

1
0

Description Polymaker HT-PLA Black is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures, without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16136
Colour:	black	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker white HT-PLA filament 1.75mm, 1kg

Polymaker white HT-PLA filament 1.75mm, 1kg DFP16137

1
0

Description Polymaker HT-PLA White is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16137
Colour:	white	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker grey HT-PLA filament 1.75mm, 1kg

Polymaker grey HT-PLA filament 1.75mm, 1kg DFP16138

1
0

Description Polymaker HT-PLA Grey is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16138
Colour:	grey	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€24.99

€20.32 Excl. 23% VAT

EU warehouse

Polymaker blue HT-PLA filament 1.75mm, 1kg

Polymaker blue HT-PLA filament 1.75mm, 1kg DFP16139

1
0

Description Polymaker HT-PLA Blue is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16139
Colour:	blue	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker red HT-PLA filament 1.75mm, 1kg

Polymaker red HT-PLA filament 1.75mm, 1kg DFP16140

1
0

Description Polymaker HT-PLA Red is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300 mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16140
Colour:	red	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker green HT-PLA filament 1.75mm, 1kg

Polymaker green HT-PLA filament 1.75mm, 1kg DFP16141

1
0

Description Polymaker HT-PLA Green is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16141
Colour:	green	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker yellow HT-PLA filament 1.75mm, 1kg

Polymaker yellow HT-PLA filament 1.75mm, 1kg DFP16142

1
0

Description Polymaker HT-PLA Yellow is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16142
Colour:	yellow	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker orange HT-PLA filament 1.75mm, 1kg

Polymaker orange HT-PLA filament 1.75mm, 1kg DFP16143

1
0

Description Polymaker HT-PLA Orange is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures, without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16143
Colour:	orange	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker brown HT-PLA filament 1.75mm, 1kg

Polymaker brown HT-PLA filament 1.75mm, 1kg DFP16144

1
0

Description Polymaker HT-PLA Brown is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16144
Colour:	brown	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker teal HT-PLA filament 1.75mm, 1kg

Polymaker teal HT-PLA filament 1.75mm, 1kg DFP16145

1
0

Description Polymaker HT-PLA Teal is a high-performance 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16145
Colour:	teal	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker rainbow HT-PLA filament 1.75mm, 1kg

Polymaker rainbow HT-PLA filament 1.75mm, 1kg DFP16146

1
0

Description Polymaker HT-PLA Rainbow is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16146
Colour:	rainbow	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€31.99

€26.01 Excl. 23% VAT

EU warehouse

Polymaker tropical HT-PLA filament 1.75mm, 1kg

Polymaker tropical HT-PLA filament 1.75mm, 1kg DFP16147

1
0

Description Polymaker HT-PLA Tropical is a high-quality 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16147
Colour:	tropical	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€31.99

€26.01 Excl. 23% VAT

EU warehouse

Polymaker ice HT-PLA filament 1.75mm, 1kg

Polymaker ice HT-PLA filament 1.75mm, 1kg DFP16148

1
0

Description Polymaker HT-PLA Ice is a high-performance 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16148
Colour:	ice	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

Polymaker fire HT-PLA filament 1.75mm, 1kg

Polymaker fire HT-PLA filament 1.75mm, 1kg DFP16149

1
0

Description Polymaker HT-PLA Fire is a high-performance 3D printer filament that combines the user-friendliness of standard PLA with exceptional heat resistance up to 150°C. This makes it ideal for functional parts that must withstand high temperatures without the need for post-processing such as annealing. With a print speed of up to 300mm/s and compatibility with standard PLA settings, this filament delivers professional results on virtually any FDM printer.

Key Features:

Heat resistant up to 150°C without post-processing
Print speed up to 300mm/s
Compatible with standard PLA settings

Specifications

Amount:	1 kg	Nozzle temp range:	210 - 230 °C
Brand:	Polymaker	Our item no:	DFP16149
Colour:	fire	Spool empty weight:	± 140 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25 - 60 °C	Outer diameter:	Ø 20.0 cm
Material:	HT-PLA	Spool width:	6.8 cm

Colour:

€26.99

€21.94 Excl. 23% VAT

EU warehouse

REAL black ASA-CF filament 1.75mm, 1kg

REAL black ASA-CF filament 1.75mm, 1kg DFS02022

Description ASA-CF filament from REAL has all the benefits of standard ASA with the addition of 10% carbon particles, which provides better reliability and stiffness. It is easy to print, has good bonding between layers and has a beautiful matte appearance. In addition, it is just as water, UV and heat resistant as standard ASA and prints from this material can be used perfectly outdoors. With ASA-CF you get a strong and low-shrink filament that is perfect for prints that must also be able to easily withstand different weather conditions.

Specifications

Amount:	1 kg	Material:	ASA CF
Brand:	REAL	Nozzle temp range:	230 - 265 °C
Colour:	black	Our item no:	DFS02022
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	85 - 115 °C	Spool width:	7.0 cm

€62.50

€50.81 Excl. 23% VAT

In stock

123-3D black PC CF filament 1.75mm, 1kg

123-3D black PC CF filament 1.75mm, 1kg DHM00208

1
0

Description 123-3D version 1.75mm PC CF filament is a unique combination of PC and 10% carbon fibres. It has a high thermal resistance, is UV-resistant, stable and shrinks little. In addition, this filament is resistant to moisture, chemicals and wear.

Key Features:

10% added carbon fibres
High impact resistance and durability
Good UV resistance and thermal resistance
Shrinks little

Applications: Ideal for making prototypes, functional parts, electronic parts, automotive parts, mechanical parts and sports equipment.

Please note: Due to the added carbon fibres it is recommended to use a hardened steel nozzle or ruby nozzle of 0.6mm or larger.

Specifications

Amount:	1 kg	Nozzle temp range:	270 - 295 °C
Brand:	123-3D	Our item no:	DHM00208
Colour:	black	Roundness:	>95%
Density:	1.24	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	85 - 135 °C	Outer diameter:	Ø 20.0 cm
Material:	PC CF	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

€49.50

€40.24 Excl. 23% VAT

EU warehouse

123-3D adhesive spray, 150ml

123-3D adhesive spray, 150ml DAR02393

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download	Volume:	150 ml

€8.50

€6.91 Excl. 23% VAT

In stock

3D print post-processing set

3D print post-processing set DAR00620

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

€9.75

€7.93 Excl. 23% VAT

In stock

3DLAC adhesive spray, 400ml

3DLAC adhesive spray, 400ml DVB00005

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	300 mm
Diameter:	53 mm	Our item no:	DVB00005
Download SDS:	Download	Volume:	400ml

Variant:

€12.75

€10.37 Excl. 23% VAT

In stock

BIQU Panda Storage Rack for 3D filament

BIQU Panda Storage Rack for 3D filament DAR02687

1
0

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D filaments. Thanks to its stackable design and narrow depth, this rack can hold up to 40+ spools without taking up unnecessary space in your workspace. Ideal for home use or in a professional workshop.

Specifications

Brand:	BIQU	Our item no:	DAR02687
Colour:	black	Quantity:	1
Dimensions:	1,320 x 635 x 330 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€63.50 (coming soon)

€51.63 Excl. 23% VAT

eSun Pro 3 eVacuum kit

eSun Pro 3 eVacuum kit DAR01277

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

€26.50

€21.54 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

€76.50

€62.20 Excl. 23% VAT

In stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

EU warehouse

SUNLU filament connector

SUNLU filament connector DAR01819

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Filament diameter:	1.75 mm
Manual:	Download	Our item no:	DAR01819

€42.50

€34.55 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm -

€5.25

€4.75

€3.86 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

Popular products

Super Lube

€8.25

3D PRO black pen with LCD display (123-3D version)

3D PRO black pen with LCD display (123-3D version)

€29.50

Modifi3D repair/modification tool

Modifi3D repair/modification tool

€34.75

© 2026 - 123-3d.ie