Buy 3D printers, filament, parts & tools | lowest prices

Quantity	Product
No products
Total: €0.00

F136-C1 Nylon pellets, 1kg (123-3D brand)

Description

Specifications

Amount:	1 kg	Material:	Nylon
Brand:	123-3D	Our item no:	DPL00008
Colour:	neutral

Order now, we can ship this tomorrow!

€22.50

€18.29 Excl. 23% VAT

In stock

REAL white PA filament 1.75mm, 0.5kg

Zoom in

Description The white PA (1.75mm) is a professional, very strong nylon filament. This 3D printing material has excellent mechanical and chemical properties. PA is also distinguished by its very low water absorption. The material can be printed at a relatively low temperature and can be used on almost all FFF and FDM printers.

Specifications

Amount:	0.5 kg	Material:	PA Low Warp
Brand:	REAL	Max deviation:	+mn ± 0.05 mm
Colour:	white	Our item no:	DFN02014
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	-	Inner diameter:	Ø 5.6 cm
Heated bed temp:	80 - 105 °C	Outer diameter:	Ø 20.0 cm
Length:	200 m	Spool width:	7.0 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€39.50

€32.11 Excl. 23% VAT

EU warehouse

REAL black PA filament 1.75mm, 0.5kg

Zoom in

Description The black PA (1.75mm) is a professional, very strong nylon filament. This 3D printing material has excellent mechanical and chemical properties. PA is also distinguished by its very low water absorption. The material can be printed at a relatively low temperature and can be used on almost all FFF and FDM printers.

Specifications

Amount:	0.5 kg	Material:	PA Low Warp
Brand:	REAL	Max deviation:	+mn ± 0.05 mm
Colour:	black	Our item no:	DFN02012
Filament diameter:	1.75 mm	Roundness:	>95%
Filament print speed:	-	Inner diameter:	Ø 5.6 cm
Heated bed temp:	80 - 105 °C	Outer diameter:	Ø 20.0 cm
Length:	200 m	Spool width:	7.0 cm

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this tomorrow!

€39.50

€32.11 Excl. 23% VAT

In stock

BASF Ultrafuse neutral PA filament 1.75mm, 0.75kg

Zoom in

Description This neutral Ultrafuse PA filament from BASF consists of polyamide and is characterised by high resistance to deformation and great flexibility. This makes it a suitable filament type for use in moving parts. The neutral filament has a diameter of 1.75mm. The print temperature is between 220°C and 250°C, and the glass transition temperature is 49°C.

Specifications

Amount:	0.75 kg	Material:	PA
Brand:	BASF	Nozzle temp range:	220 - 250 °C
Colour:	neutral	Our item no:	DFB00046
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 120 °C	Spool width:	5.2 cm

Order now, we can ship this tomorrow!

€62.50

€50.81 Excl. 23% VAT

In stock

BASF Ultrafuse black PAHT CF15 filament 1.75mm, 0.75kg

Zoom in

Description This black Ultrafuse PAHT CF15 filament from BASF is made of polyamide with extra high heat resistance. The filament can withstand prolonged exposure to temperatures of up to 130°C. The black-coloured filament has a diameter of 1.75mm. The print temperature is between 260°C and 280°C.

Specifications

Amount:	0.75 kg	Material:	PAHT CF15
Brand:	BASF	Nozzle temp range:	260 - 280 °C
Colour:	black	Our item no:	DFB00048
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	100 - 120 °C	Spool width:	5.2 cm

€73.50

€59.76 Excl. 23% VAT

EU warehouse

colorFabb black PA NEAT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb PA NEAT filament is colorFabb's new, heat resistant filament made of polyamide (nylon). Even with a temperature of 120°C, a print of this filament can function well. This makes it a perfect material for making professional prints that last longer. PA has excellent mechanical and chemical properties. It is also distinguished by its very low water absorption. With PA NEAT you have a strong filament that does not deform: ideal for functional prints.

Nylon filaments absorb moisture and must be dried thoroughly before printing. This filament has a drying advice of 4 to 6 hours at a temperature of 70 to 80 degrees.

Specifications

Amount:	0.75 kg	Nozzle temp range:	265 - 290 °C
Brand:	colorFabb	Our item no:	DFP13261
Colour:	black	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 50 °C	Spool width:	5.5 cm
Material:	PA NEAT

€64.50

€52.44 Excl. 23% VAT

EU warehouse

colorFabb matte black PA-CF low warp filament 1.75mm, 0.7kg

Zoom in

Description The matte black colorFabb PA-CF Low Warp filament (1.75mm) is professional and very strong. The most important properties are the high tensile strength, great heat resistance and many carbon fibres that are contained in this filament. With the colorFabb PA-CF Low Warp filament you have almost no problems with warping (distortion) and you can also print large 3D prints with confidence.

The ideal printing temperature for this nylon filament is 260°C to 280°C. For best results, set the heated bed to 50°C.

Specifications

Amount:	0.7 kg	Material:	PA-CF
Brand:	colorFabb	Max deviation:	+mn ± 0.10 mm
Colour:	matte black	Nozzle temp range:	260 - 280 °C
Filament diameter:	1.75 mm	Our item no:	DFP13068
Filament print speed:	-	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0 - 50 °C	Outer diameter:	Ø 20.0 cm
Length:	250 m	Spool width:	5.5 cm

€87.75

€71.34 Excl. 23% VAT

EU warehouse

eSun neutral ePA filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ePA Nylon filament has been developed on the basis of 6/66 copolymer. It has a high toughness and impact resistance. In addition, it hardly shrinks or breaks. ePA filament is ideal for printing objects that require high break resistance. It is possible to print the filament. This eSun ePA Nylon filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	eSun	Our item no:	DFE20038
Colour:	neutral	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	ePA

€31.50

€25.61 Excl. 23% VAT

EU warehouse

eSun neutral ePA-CF filament 1.75mm, 1kg

Zoom in

Description eSun's neutral ePA-CF Nylon filament has been developed on the basis of 6/66 copolymer. It consists of 20% carbon fibre which ensures high strength, stiffness and toughness. This allows the filament to replace metal materials in many cases. This ePA-CF Nylon filament has excellent printability. Your prints get a matte surface with this filament. The material has a heat forming temperature of up to 155℃. In addition, it hardly shrinks, does not warp and does not crack. This eSun ePA-CF Nylon with carbon fibre filament has a diameter of 1.75mm.

Specifications

Amount:	1 kg	Nozzle temp range:	240 - 260 °C
Brand:	eSun	Our item no:	DFE20040
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.5 cm
Material:	ePA-CF

Order now, we can ship this tomorrow!

€55.50

€45.12 Excl. 23% VAT

In stock

eSun black ePA12 Nylon filament 1.75mm, 1kg

Zoom in

Description This black eSun ePA12 filament is ideal for making durable prints. ePA12 prints very well and is more resistant to wear. It is based on PA12 and absorbs less moisture than other filaments, meaning your print is less affected by humidity and temperature changes. The filament shrinks little, is not easy to deform and does not break during printing.

This filament is strong, has a high impact resistance and is very resistant to higher temperatures. Prints from ePA12 will only deform at 100°C, which makes it ideal for printing parts that have to perform at higher temperatures.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 290 °C
Brand:	eSun	Our item no:	DFE20234
Colour:	black	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Spool width:	6.5 cm
Material:	ePA12

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

Order now, we can ship this tomorrow!

€92.50

€75.20 Excl. 23% VAT

In stock

eSun white ePA12 Nylon filament 1.75mm, 1kg

Zoom in

Description This white eSun ePA12 filament is ideal for making durable prints. ePA12 prints very well and is more resistant to wear. It is based on PA12 and absorbs less moisture than other filaments, meaning your print is less affected by humidity and temperature changes. The filament shrinks little, is not easy to deform and does not break during printing.

This filament is strong, has a high impact resistance and is very resistant to higher temperatures. Prints from ePA12 will only deform at 100°C, which makes it ideal for printing parts that have to perform at higher temperatures.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 290 °C
Brand:	eSun	Our item no:	DFE20235
Colour:	white	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	70 - 90 °C	Spool width:	6.5 cm
Material:	ePA12

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€92.50

€75.20 Excl. 23% VAT

EU warehouse

eSun natural ePA12-CF Nylon filament 1.75mm, 1kg

Zoom in

Description This ePA12-CF filament from eSun is based on PA12 with the additional addition of 15% carbon fibres. These enhance the severity and strength of the nylon and even make it possible to use this filament as a replacement for metal in many situations. Because it absorbs little moisture, prints made from this material are more resistant to humidity and temperature changes. This filament is ideal for printing parts such as gears, because it is self-lubricating and can withstand frequent use.

For long-term use, ePA12-CF can function well at temperatures up to 120°C. For short-term use it can withstand a temperature of up to 160°C. The filament shrinks little, is not easy to deform and does not break during printing. It is refined and has a matte appearance.

Specifications

Amount:	1 kg	Nozzle temp range:	270 - 300 °C
Brand:	eSun	Our item no:	DFE20236
Colour:	natural	Inner diameter:	Ø 5.0 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.5 cm
Material:	ePA12-CF

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€99.50

€80.89 Excl. 23% VAT

EU warehouse

eSun natural ePAHT-CF Nylon filament 1.75mm, 0.75kg

Zoom in

Description This eSun ePAHT-CF filament is based on PA6 with an addition of 15% carbon fibres. The high strength, stiffness, mechanical and thermal properties are even better than other nylon filaments from eSun. In many cases, ePAHT-CF can be used as a replacement for metal. This makes it perfect for printing robot, drone and aviation parts.

For long-term use, ePAHT-CF can function well at temperatures up to 150°C. For short-term use it can withstand a temperature of up to 180°C. The filament shrinks little, is not easy to deform and does not break during printing. It is refined and has a matte appearance.

Please note:

For best results, dry ePAHT-CF at 70°C/>12H and print with a skirt around your model.
Because it is not easy to bend, it is advisable to avoid excessive bending of the wire as much as possible.
The added carbon fibres in ePAHT-CF ensure that you can better print this filament with a hard steel nozzle or a ruby nozzle. We also recommend a hard steel extruder.

Specifications

Amount:	0.75 kg	Nozzle temp range:	260 - 300 °C
Brand:	eSun	Our item no:	DFE20238
Colour:	natural	Inner diameter:	Ø 5.6 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	45 - 60 °C	Spool width:	6.3 cm
Material:	ePAHT-CF

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€91.50

€74.39 Excl. 23% VAT

EU warehouse

Polymaker CoPA black Nylon filament 1.75mm, 0.75kg

Zoom in

Description The black Polymaker CoPA filament is very strong, tough and heat resistant up to 180˚C. This filament is produced with Warp Free technology, so you will not suffer from warping (distortion). The filament comes in the colour black, has a diameter of 1.75mm and is easy to print.

Specifications

Amount:	0.75 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14002
Colour:	black	Spool empty weight:	± 125 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Material:	CoPA Nylon

€72.50

€58.94 Excl. 23% VAT

EU warehouse

Polymaker Nylon clear CoPA filament 1.75mm, 0.75kg

Zoom in

Description The neutral Polymaker CoPA filament is very strong, tough and heat resistant up to 180˚C. This filament is produced with Warp Free technology, so you do not suffer from warping (deformation). The clear filament has a diameter of 1.75mm and is easy to print.

Specifications

Amount:	0.75 kg	Nozzle temp range:	250 - 270 °C
Brand:	Polymaker	Our item no:	DFP14285
Colour:	transparent	Spool empty weight:	± 125 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Material:	CoPA Nylon

€72.50

€58.94 Excl. 23% VAT

EU warehouse

Polymaker Polymide black PA12-CF filament 1.75mm, 0.5kg

Zoom in

Description Polymide PA12-CF filament from Polymaker is a PA 12 (Nylon 12) filament with carbon fibers. Due to the low moisture sensitivity of PA12, this filament has excellent mechanical and thermal properties. Polymide has high shock resistance, minimal wear and can withstand extreme temperatures. The Warp-Free technology ensures that this material can be printed easily and without warping.

Please note: you need a wear-resistant/hardened nozzle to print with this filament.
Annealing: 6 hours at 80℃

Specifications

Amount:	0.5 kg	Nozzle temp range:	260 - 300 °C
Brand:	Polymaker	Our item no:	DFP14287
Colour:	black	Spool empty weight:	± 190 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Material:	PA12-CF

Order extras:

KWB Putty knife, 40mm €3.95

3DLAC Plus adhesive spray, 100ml €7.75

Modifi3D repair/modification tool €34.75

Multi-tool set (162-pack) €59.50

Einhell TE-MT 7.2 Li Battery Rotary Multitool set (57-pack) €74.50

€93.50

€76.02 Excl. 23% VAT

EU warehouse

Polymaker Polymide black PA6-CF filament 1.75mm, 0.5kg

Zoom in

Description Polymaker PolyMide PA6-CF filament in black is a carbon fibre reinforced nylon. This material has very good thermal properties and does not affect the layer adhesion. The filament contains 20% ground carbon fibres, so we recommend using a wear-resistant nozzle.

This material requires a heat treatment process of 6 hours at a temperature of 80 degrees Celsius. This process changes the physical and sometimes chemical properties of the material to increase ductility and decrease hardness to make it more machinable.

The black filament has a diameter of 1.75mm and a weight of 0.5kg.

Specifications

Amount:	0.5 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14288
Colour:	black	Spool empty weight:	± 190 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Material:	PA6-CF

€56.50 (coming soon)

€45.93 Excl. 23% VAT

Polymaker PolyMide black PA6-CF filament 1.75mm, 2kg

Zoom in

Description Polymaker PolyMide PA6-CF filament in the colour black is a carbon fibre reinforced nylon. This material has very good thermal properties and does not affect the layer adhesion. The filament contains 20% crushed carbon fibres, so we recommend using a wear-resistant nozzle. The black filament has a diameter of 1.75mm and a weight of 2kg.

Specifications

Amount:	2 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14124
Colour:	black	Spool empty weight:	± 370 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 26.8 cm
Heated bed temp:	25 - 50 °C	Spool width:	10.0 cm
Material:	PA6-CF

Order now, we can ship this tomorrow!

€192.50

€156.50 Excl. 23% VAT

In stock

Polymaker Polymide grey PA6-GF filament 1.75mm, 0.5kg

Zoom in

Description Polymaker PolyMide PA6-GF filament in the colour grey is a glass fibre reinforced nylon. This material has very good thermal properties and does not affect the layer adhesion. The filament contains 20% ground glass fibers, so we recommend using a wear-resistant nozzle. The grey filament has a diameter of 1.75mm and a weight of 0.5kg.

Specifications

Amount:	0.5 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14289
Colour:	grey	Spool empty weight:	± 190 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	25 - 50 °C	Spool width:	4.5 cm
Material:	PA6-GF

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€47.50 (coming soon)

€38.62 Excl. 23% VAT

Polymaker PolyMide grey PA6-GF filament 1.75mm, 2kg

Zoom in

Description This grey Polymaker PolyMide PA6-GF filament is made of glass fiber reinforced nylon. This material has very good thermal properties and does not affect the layer adhesion. The filament contains 20% ground glass fibres, so we recommend using a wear-resistant nozzle. The grey filament has a diameter of 1.75mm and a weight of 2kg.

Specifications

Amount:	2 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14122
Colour:	grey	Spool empty weight:	± 370 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 26.8 cm
Heated bed temp:	25 - 50 °C	Spool width:	10.0 cm
Material:	PA6-CF

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€192.50 (coming soon)

€156.50 Excl. 23% VAT

Zortrax black Z-NYLON filament 1.75mm, 0.8kg

Zoom in

Description This black Zortrax Z-Nylon filament is a versatile filament that is resistant to high temperatures and various chemicals. It can be easily finished and coloured, making it very suitable for printing functional prototypes. The spool contains approximately 0.8kgs of filament.

Specifications

Amount:	0.8 kg	Max deviation:	+mn ± 0.10 mm
Brand:	Zortrax	Nozzle temp range:	245 - 255
Colour:	black	Our item no:	DFP00125
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90 - 100 °C	Spool width:	5.4 cm
Material:	PA-CF

Interested in ordering?

Click HERE to send us a mail and we'll alert you when it becomes available!

This product is end of life.

3DLAC Nylon, 30ml

Zoom in

Description 3DLAC Nylon is ideal for creating strong, detailed prints with a long lifespan. It is specially designed to work seamlessly with nylon filaments. This allows you to produce precise, high-quality prints. 3DNylon provides better bed adhesion to nylon filaments, making it easier to print detailed models. In addition, the filament layers will form a strong bond and will not come loose during printing. This bond extends the lifespan of your print and helps to reduce fragility. Finally, it ensures that your print does not warp or curl during the printing process. The user-friendly brush makes it easy to use this product.

Specifications

Brand:	3DLAC	Our item no:	DAR01371
Diameter:	37 mm	Volume:	30ml
Dimensions:	55 mm

€25.50

€20.73 Excl. 23% VAT

EU warehouse

Magigoo Pro 3D glue stick for PA filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with PA filament. PA, or polyamide, is known as a challenging filament type that adheres poorly to the print bed and warps quickly. This adhesive stick offers the solution and ensures perfect adhesion of PA-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! The package contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00210	Volume:	50 ml
Type:	glue stick

Order now, we can ship this tomorrow!

€24.75

€20.12 Excl. 23% VAT

In stock

Hygrometer round

Zoom in

Description In addition to a moisture percentage, the round hygrometer also displays the temperature. Its round shape makes it easy to install. The hygrometer is ideal for making a filament storage box.

The hygrometer is delivered without battery.

Specifications

Brand:	123-3D	Our item no:	DRW00020
Colour:	black

Order now, we can ship this tomorrow!

€6.75

€5.49 Excl. 23% VAT

In stock

Spectrum natural Nylon PA6 Low Warp filament 1.75mm, 0.5kg

Zoom in

1
0

Description The Spectrum Nylon PA6 Low Warp is a strong filament that shrinks little. In addition, the filament has a high impact resistance, excellent mechanical properties and is resistant to fuels and oils. Thanks to the materials this filament is made of, it is ideal for use in projects where friction is caused. The components also have good electrical insulation. This is a 1.75mm natural filament on a 0.5kg spool.

Tip: To get the best results from this filament, it is important to store it in a dry and dark place with less than 15% humidity. It is also recommended to dry the filament before using it.

Specifications

Amount:	0.5 kg	Nozzle temp range:	250 - 280 °C
Brand:	Spectrum	Our item no:	DFS10118
Colour:	neutral	Spool empty weight:	± 220 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	85 - 100 °C	Spool width:	5.5 cm
Material:	PA6 Low Warp

€26.50

€21.54 Excl. 23% VAT

EU warehouse

Spectrum black Nylon PA6 Low Warp CF15S filament 1.75mm, 0.5kg

Zoom in

1
0

Description The Nylon PA6 Low Warp CF15S is a strong and low-shrinkage material that has the advantages of carbon fibers. In addition, it is stiff, dampens vibration and is wear-resistant. This filament is resistant to chemical materials and has a consistent operation, even at higher temperatures up to 180˚C. This makes the material an ideal choice for 3D prints that must withstand heavy conditions. The filament is specially designed for better flow, which results in better adhesion. Thanks to the 15% added carbon fibres, the stiffness and tensile strength have been significantly improved. Finally, the carbon fibres give the filament a matte look, making the layer lines less visible. This is a 1.75mm black filament on a 0.5kg spool.

Specifications

Amount:	0.5 kg	Nozzle temp range:	250 - 280 °C
Brand:	Spectrum	Our item no:	DFS10119
Colour:	black	Spool empty weight:	± 220 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	5.5 cm
Material:	PA6 Low Warp CF15S

€40.50

€32.93 Excl. 23% VAT

EU warehouse

Spectrum black Nylon PA6 Low Warp GF30 filament 1.75mm, 1kg

Zoom in

1
0

Description The Nylon PA6 Low Warp GF30 is a nylon filament reinforced with 30% glass fibres. This makes it a hard filament with high heat resistance (maximum 180˚C). In addition, the filament has excellent resistance to chemicals, is resistant to wear and shrinks little. Nylon PA6 Low Warp has good adhesion between layers and can be printed without a heated print chamber. This is a 1.75mm black filament on a 1kg spool.

Specifications

Amount:	1 kg	Nozzle temp range:	250 - 280 °C
Brand:	Spectrum	Our item no:	DFS10120
Colour:	black	Spool empty weight:	± 250 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Filament print speed:	-	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0 - 80 °C	Spool width:	6.7 cm
Material:	PA6 Low Warp GF30

€71.50

€58.13 Excl. 23% VAT

EU warehouse

123-3D black PA12 CF15 filament 1.75mm, 1kg

Zoom in

1
0

Description 123-3D version 1.75mm PA12 CF15 filament is a lightweight, durable nylon filament with 15% added carbon particles. It is known for its exceptional strength, stiffness, and excellent thermal resistance. It also has an improved layer adhesion and low shrinkage.

Key Features:

15% added carbon particles
10% lighter than PA CF15
Thermal resistance up to 170˚C
Little shrinkage

Applications: Ideal for making structural parts in the aerospace industry, lightweight and durable drone parts, advanced prototypes and functional models.

Please note: Due to the added carbon fibres it is recommended to use a hardened steel nozzle or ruby nozzle of 0.6mm or larger.

Specifications

Amount:	1 kg	Nozzle temp range:	255 - 295 °C
Brand:	123-3D	Our item no:	DHM00237
Colour:	black	Roundness:	>95%
Density:	1.27	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	80 - 130 °C	Outer diameter:	Ø 20.0 cm
Material:	PA12 CF15	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

€94.50

€76.83 Excl. 23% VAT

EU warehouse

123-3D black PA6 CF15 filament 1.75mm, 1kg

Zoom in

1
0

Description 123-3D version 1.75mm PA6 CF15 filament is PA6 filament with 15% added carbon particles, which increases the mechanical strength. Moisture absorption is reduced by 50% and water is absorbed 4 times less quickly than with normal PA6.

Key Features:

Up to 180˚C for max. 200 hours, up to 150˚C for max. 20,000 hours
Wear-resistant and high mechanical strength
Good layer adhesion
Prints have high hardness and stiffness

Applications: Ideal for making functional prototypes, tools, gears and ring and plate seals that require increased resistance to chemicals and corrosion.

Please note: Due to the added carbon fibres it is recommended to use a hardened steel nozzle or ruby nozzle of 0.6mm or larger.

Specifications

Amount:	1 kg	Nozzle temp range:	260 - 295 °C
Brand:	123-3D	Our item no:	DHM00238
Colour:	black	Roundness:	>95%
Density:	1.25	Spool empty weight:	± 216 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50 - 80 °C	Outer diameter:	Ø 20.0 cm
Material:	PA6 CF15	Spool width:	6.8 cm
Max deviation:	+mn ± 0.05 mm

€75.50

€61.38 Excl. 23% VAT

EU warehouse

123-3D black PA6 pellets, 5kg

Zoom in

Description The 123-3D black PA6 pellets are high-quality nylon (PA6) pellets, ideal for users who want to extrude their own filament or print directly with a pellet extruder. These black pellets offer excellent mechanical properties and are suitable for various technical applications.

Specifications

Brand:	123-3D	Our item no:	DPL00049
Colour:	black	Weight:	5 kg

€75.50

€61.38 Excl. 23% VAT

EU warehouse

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00005
Diameter:	53 mm	Volume:	400ml
Dimensions:	300 mm

Order now, we can ship this tomorrow!

€12.75

€10.37 Excl. 23% VAT

In stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of the 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Our item no:	DVB00018
Diameter:	30 mm	Volume:	100ml
Height:	150 mm

Order now, we can ship this tomorrow!

€7.75

€6.30 Excl. 23% VAT

In stock

3DLAC stick, 80ml

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily smear various surfaces, so that your printed object is adhered perfectly in place. When the plate has cooled down completely, your 3D printed object can be easily removed.

The 3DLAC stick offers excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with a 3DLAC stick that they are somewhat difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	143 mm
Diameter:	33 mm	Our item no:	DAR00884
Download SDS:	Download	Volume:	80ml

Order now, we can ship this tomorrow!

€7.25

€5.89 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm - €5.25

Order now, we can ship this tomorrow!

€4.75

€3.86 Excl. 23% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

Order now, we can ship this tomorrow!

€9.75

€7.93 Excl. 23% VAT

In stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Brand:	Smooth-On	Volume:	181 grams
Our item no:	DAR00876

Order now, we can ship this tomorrow!

€29.50

€23.98 Excl. 23% VAT

In stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Brand:	Smooth-On	Volume:	644 grams
Our item no:	DAR00877

Order now, we can ship this tomorrow!

€61.50

€50.00 Excl. 23% VAT

In stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic spool holder kit is ideal for setting up your filament spools if your printer does not have a spool holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Brand:	123-3D	Dimensions:	160 x 180 x 125 mm
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this tomorrow!

€10.25

€8.33 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

Order now, we can ship this tomorrow!

€76.50

€62.20 Excl. 23% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

Order now, we can ship this tomorrow!

€34.75

€28.25 Excl. 23% VAT

In stock

SUNLU FilaDryer S1 drybox

Zoom in

Description The FilaDryer S1 Drybox with an EU adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours -6 hours) and temperature (35°C-55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Brand:	Sunlu	Dimensions:	237 x 271 x 100 mm
Colour:	white	Our item no:	DFB00006

Order now, we can ship this tomorrow!

€50.50

€41.06 Excl. 23% VAT

In stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 Drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Brand:	Sunlu	Our item no:	DAR00698
Colour:	black	Temp range:	35-70 °C
Dimensions:	274 x 265 x 118 mm	Voltage:	24 v
Input voltage:	100-240V	Weight:	11.9 kg
Power rating:	48 W

Order now, we can ship this tomorrow!

€73.50

€59.76 Excl. 23% VAT

In stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents damp filament. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or 1 3kg roll. 3kg polymaker brand spools are compatible with this drybox but, our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Brand:	Polymaker	Our item no:	DAR00634
Dimensions:	310 x 315 x 190 mm	Weight:	1.15 kg

€73.50

€59.76 Excl. 23% VAT

EU warehouse

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, (bath) room or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Brand:	123-3D	Our item no:	DRW00069
Colour:	white

Order now, we can ship this tomorrow!

€12.50

€10.16 Excl. 23% VAT

In stock

eSun Pro 3 eVacuum kit

Zoom in

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

Order now, we can ship this tomorrow!

€26.50

€21.54 Excl. 23% VAT

In stock

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Brand:

eSun

Our item no:

DAR01365

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€26.50 (coming soon)

€21.54 Excl. 23% VAT

SUNLU FilaDryer S4 drybox

Zoom in

2
1
0

Description The SUNLU FilaDryer S4 can store up to 4 spools of 1 kg filament, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75mm, 2.85mm and 3.0mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458mm x 218mm x 312mm.

Specifications

Brand:	Sunlu	Power rating:	320 W
Dimensions:	350 x 516 x 278 mm	Our item no:	DAR01448
Input voltage:	110-240V	Weight:	4.8 kg

€149.50

€121.54 Excl. 23% VAT

EU warehouse

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Our item no:	DAR01819
Filament diameter:	1.75 mm

Order now, we can ship this tomorrow!

€42.50

€34.55 Excl. 23% VAT

In stock

3D Printed spool holder

Zoom in

Description This flexible solution of PLA 3D printed parts is suitable as a spool holder for various sizes of spools. Easy to use and also suitable for heavier 3kg and 5kg spools. Cardboard spools are also no problem for this spool holder.

Specifications

Brand:	RepRapWorld	Our item no:	DFR00004
Material:	PLA

Order now, we can ship this tomorrow!

€21.50

€17.48 Excl. 23% VAT

In stock

Menu

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Popular products

1.75mm Nylon

Menu

Search product

My 123-3D.ie

Customer reviews

Payment options

Follow us on social media

Official dealer

Shopping cart

Don't forget the.....!

Newsletter

Popular products

1.75mm Nylon