Buy 3D printers, filament, parts & tools | lowest prices

Polymaker Fiberon grey PA6-GF25 filament 1.75mm, 0.5kg

1
0

Description Polymaker Fiberon PA6-GF25 filament is nylon6 reinforced with glass fibres. This gives it excellent thermal and mechanical properties, without compromising interlayer adhesion. This product is grey in colour, 1.75mm and comes on a 0.5kg spool.

Please note: We recommend using a wear resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	0.5 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14551
Colour:	grey	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40 - 50 °C	Spool width:	5.2 cm
Material:	PA6-GF25

€37.50

€30.49 Excl. 23% VAT

EU warehouse

Polymaker Fiberon black PA6-CF20 filament 1.75mm, 0.5kg

Zoom in

1
0

Description Polymaker Fiberon PA6-CF20 filament is nylon6 reinforced with carbon fibres. This gives it improved stiffness, strength and heat resistance, without sacrificing interlayer adhesion. This product is black, 1.75mm and comes on a 0.5kg spool.

Please note: We recommend using a wear resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	0.5 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14552
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40 - 50 °C	Spool width:	5.2 cm
Material:	PA6-CF20

€48.50

€39.43 Excl. 23% VAT

In stock

Polymaker Fiberon black PA12-CF10 filament 1.75mm, 0.5kg

Zoom in

1
0

Description Polymaker Fiberon PA6-CF10 filament is nylon12 reinforced with carbon fibres. Due to its chemical structure, this filament is less sensitive to moisture. The 'warp-free' technology ensures that the 3D print does not deform. This product is black, is 1.75mm and comes on a 0.5kg spool.

Please note: We recommend using a wear resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	0.5 kg	Nozzle temp range:	230 - 300 °C
Brand:	Polymaker	Our item no:	DFP14553
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40 - 50 °C	Spool width:	5.2 cm
Material:	PA12-CF10

€75.50

€61.38 Excl. 23% VAT

EU warehouse

Polymaker Fiberon black PA612-CF15 filament 1.75mm, 0.5kg

Zoom in

1
0

Description Polymaker Fiberon PA6-CF10 filament is nylon12 reinforced with carbon fibres. Due to its chemical structure, this filament is less sensitive to moisture. The 'warp-free' technology ensures that the 3D print does not deform. This product is black, is 1.75mm and comes on a 0.5kg spool.

Please note: We recommend using a wear resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	0.5 kg	Nozzle temp range:	250 - 300 °C
Brand:	Polymaker	Our item no:	DFP14554
Colour:	black	Inner diameter:	Ø 5.5 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40 - 50 °C	Spool width:	5.2 cm
Material:	PA612-CF15

€44.50

€36.18 Excl. 23% VAT

EU warehouse

Polymaker black Fiberon PA612-ESD filament 1.75mm, 0.5kg

Zoom in

1
0

Description With Fiberon PA612-ESD, you can not only print robust and precise parts but also protect your sensitive electronics. This high-tech filament combines a PA612 nylon base with carbon fibres and carbon nanotubes, making it mechanically strong, dimensionally stable, and electrostatically dissipative. Thanks to a heat resistance of up to 157°C (at 0.45 MPa), your prints retain their shape even under thermal stress.

Fiberon PA612-ESD is ideal for ESD-safe enclosures, jigs, tools, and other applications where electrostatic discharge poses a risk. Because the filament is dimensionally stable and exhibits minimal distortion, it is ideal for critical industrial applications and functional end parts.

Please note: We recommend using a wear-resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	0.5 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14572
Colour:	black	Spool empty weight:	± 190 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	40 - 50 °C	Outer diameter:	Ø 20.0 cm
Material:	PA612-ESD	Spool width:	6.8 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€71.00 (coming soon)

€57.72 Excl. 23% VAT

Polymaker black Fiberon PA612-ESD filament 1.75mm, 3kg

Zoom in

1
0

Description With Fiberon PA612-ESD, you can not only print robust and precise parts but also protect your sensitive electronics. This high-tech filament combines a PA612 nylon base with carbon fibres and carbon nanotubes, making it mechanically strong, dimensionally stable, and electrostatically dissipative. Thanks to a heat resistance of up to 157°C (at 0.45 MPa), your prints retain their shape even under thermal stress.

Fiberon PA612-ESD is ideal for ESD-safe enclosures, jigs, tools, and other applications where electrostatic discharge poses a risk. Because the filament is dimensionally stable and exhibits minimal distortion, it is ideal for critical industrial applications and functional end parts.

Please note: We recommend using a wear-resistant nozzle, such as a hardened steel nozzle.

Specifications

Amount:	3 kg	Nozzle temp range:	280 - 300 °C
Brand:	Polymaker	Our item no:	DFP14573
Colour:	black	Spool empty weight:	± 440 grams
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	40 - 50 °C	Outer diameter:	Ø 25.2 cm
Material:	PA612-ESD	Spool width:	11.9 cm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€339.00 (coming soon)

€275.61 Excl. 23% VAT

123-3D adhesive spray, 150ml

Zoom in

Description The 123-3D Adhesive Spray prevents warping and ensures excellent adhesion of the first layer. Suitable for PLA, ABS, PETG, and more. Thanks to its powerful formula, prints adhere firmly during printing and release easily once the print bed has cooled.

Specifications

Brand:	123-3D	Our item no:	DAR02393
Download SDS:	Download	Volume:	150 ml

€8.50

€6.91 Excl. 23% VAT

In stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Brand:	123-3D	Our item no:	DAR00620
Material:	Steel

€9.75

€7.93 Excl. 23% VAT

In stock

3DLAC adhesive spray, 400ml

Zoom in

Description This 3DLAC adhesive spray can be used as a replacement for kapton tape. Keep the can at a distance of ±30cm and spray the 3DLAC on the heated bed before you start printing. At a temperature of 100-110 degrees, the spray is extremely sticky, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can be easily removed.

The 3DLAC adhesive spray provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble so you can easily clean your print surface after printing.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Brand:	3DLAC	Dimensions:	300 mm
Diameter:	53 mm	Our item no:	DVB00005
Download SDS:	Download	Volume:	400ml

€12.75

€10.37 Excl. 23% VAT

In stock

BIQU Panda Storage Rack for 3D filament

Zoom in

1
0

Description The BIQU Panda Feed Rack is a robust and space-saving storage system for your 3D filaments. Thanks to its stackable design and narrow depth, this rack can hold up to 40+ spools without taking up unnecessary space in your workspace. Ideal for home use or in a professional workshop.

Specifications

Brand:	BIQU	Our item no:	DAR02687
Colour:	black	Quantity:	1
Dimensions:	1,320 x 635 x 330 mm

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€63.50 (coming soon)

€51.63 Excl. 23% VAT

eSun Pro 3 eVacuum kit

Zoom in

Description Keep your filament dry and dust free with the eSun Pro 3 eVacuum kit. This kit allows you to vacuum your filament so you never have to worry about wet filament affecting your 3D print. The pump is efficient, compact, portable and saves you time because you don't have to wait for wet filament to dry anymore.

This vacuum kit is lightweight and very easy to use with the eSun vacuum bags. The bags have been improved, making them more durable and better recyclable. The double-coloured closure makes it easy to check the vacuum status of the bag. The yellow and blue side make the closure turn green when the bag is properly vacuumed. This kit comes with 10 vacuum bags.

Specifications

Brand:	eSun	Voltage:	5 v
Dimensions:	102 x 32 x 32 mm	Weight:	0.075 kg
Our item no:	DAR01277

€26.50

€21.54 Excl. 23% VAT

In stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for leveling surfaces
Countersink Point: For countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00090
Cable length:	150 cm	Voltage:	24 v
Max operating temp:	450 °C	Weight:	0.12 kg
Power rating:	30 W

€76.50

€62.20 Excl. 23% VAT

In stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Brand:	Modifi3D	Our item no:	DGS00007
Max operating temp:	450 °C	Voltage:	5 v
Power rating:	8 W	Weight:	0.12 kg

Extra information

Instructional video

€34.75

€28.25 Excl. 23% VAT

In stock

SUNLU filament connector

Zoom in

Description Waste less filament with this SUNLU filament connector. By using this connector, you melt the ends of filament together, so they don't have to be thrown away. Easily melt filaments of the same material together, even if they have a different colour. This way you can create personalised 3D prints with unique colourful effects.

Fast heating
Within 3 minutes the connector heats up to 185˚C and is ready to use. The maximum temperature is 240˚C, allowing you to fuse many different types of 1.75mm filaments. Thanks to the advanced temperature regulation and high-quality insulation, you can get started without any worries.

User friendly
The design of Sunlu filament connector is user-friendly and has a simple UI. The built-in window and screen allow you to monitor the melting process. The new filament is sturdy and has a smooth finish, which does not reduce the print quality.

Specifications

Brand:	Sunlu	Filament diameter:	1.75 mm
Manual:	Download	Our item no:	DAR01819

€42.50

€34.55 Excl. 23% VAT

In stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Brand:	Tesa	Our item no:	DVB00007
Length:	50 m	Width:	50 mm

Order directly

Utility knife with automatic blade change, 18mm -

€5.25

€4.75

€3.86 Excl. 23% VAT

In stock

Quantity	Product
No products
Total: €0.00

1.75mm Fiberon Nylon

Popular products