1.75mm PLA satin

97 - 104 of 104

Spectrum spicy copper PLA Silk filament 1.75mm, 1kg

Description The Spectrum PLA Silk filament gives your 3D prints a satin look. Thanks to this effect, the layer lines are less visible. The pigment that is used, retains the mechanical properties of PLA. As a result, this filament is still easy to print, shrinks little and has a high tensile strength. This is a 1.75mm spicy copper filament on a 1kg spool.

Specifications

Amount:	1 kg	Material:	PLA Satin
Brand:	Spectrum	Nozzle temp range:	210 - 240 °C
Colour:	copper	Our item no:	DFS10072
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	40 - 60 °C

Colour:

Order now, we can ship this today!

€26.50

€21.54 Excl. 23% VAT

In stock

Spectrum sterling silver PLA Silk filament 1.75mm, 1kg

Zoom in

Specifications

Amount:	1 kg	Material:	PLA Satin
Brand:	Spectrum	Nozzle temp range:	210 - 240 °C
Colour:	silver	Our item no:	DFS10073
Download SDS:	Download	Spool empty weight:	± 250 grams
Download TDS:	Download	Inner diameter:	Ø 5.2 cm
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Filament print speed:	-	Spool width:	6.7 cm
Heated bed temp:	40 - 60 °C

Colour:

€26.50

€21.54 Excl. 23% VAT

EU warehouse

SUNLU silk rainbow PLA filament 1.75mm, 1kg

Zoom in

Description Want to create beautiful prints with a rainbow effect? It's easy with the silk rainbow filament from SUNLU. This coil contains filament in seven different colours: red, orange, yellow, green, blue, purple and pink. The roll starts at one of these colours and changes to the next colour of the rainbow after about 15 meters. The multicoloured PLA filament is easy to print with (without heated bed) and provides a silky gloss finish.

Specifications

Amount:	1 kg	Max deviation:	+mn ± 0.05 mm
Brand:	Sunlu	Nozzle temp range:	220 - 230
Colour:	silk rainbow	Our item no:	DFP00172
Download TDS:	Download	Roundness:	>95%
Filament diameter:	1.75 mm	Inner diameter:	Ø 7.3 cm
Heated bed temp:	60 °C	Outer diameter:	Ø 19.6 cm
Length:	330 m	Spool width:	6.0 cm
Material:	PLA

Colour:

rainbow

silk rainbow

Order now, we can ship this today!

€34.50

€28.05 Excl. 23% VAT

In stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00206	Volume:	120 ml
Type:	glue stick

€46.50

€37.80 Excl. 23% VAT

EU warehouse

Magigoo 3D Glide Kit

Zoom in

Description With the Magigoo Glide Kit, you can apply an even layer of adhesive to your print bed in a single motion. Ideal for large surfaces and frequent use.

Specifications

Brand:	Magigoo	Type:	glue stick
Our item no:	DAR02392	Volume:	250 ml

€97.50

€79.27 Excl. 23% VAT

EU warehouse

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Brand:	Magigoo	Video instructions:	Instructional video
Our item no:	DCP00205	Volume:	50 ml
Type:	glue stick

€18.25

€14.84 Excl. 23% VAT

EU warehouse

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you clean the hot end of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Amount:	0.1 kg	Filament diameter:	1.75 mm
Brand:	123-3D	Nozzle temp range:	210 - 225 °C
Colour:	neutral	Our item no:	DFR00000

Order now, we can ship this today!

€10.25

€8.33 Excl. 23% VAT

In stock

123-3D Filament Spool Holder

Zoom in

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications