Elegoo

73 - 96 of 221

Description This original end stop cable is specially designed for the Elegoo Saturn 3 and ensures reliable operation of the limit switch. Perfect as a replacement in case of wear or malfunction.

Specifications

Brand:

Elegoo

Our item no:

DAR01548

€2.95

€2.40 Excl. 23% VAT

EU warehouse

Elegoo Saturn 3 stepper motor with leadscrew

Zoom in

Description The stepper motor with leadscrew for the Elegoo Saturn 3 ensures precise Z-axis motion and is perfectly matched to the mechanical system of this resin printer. Thanks to the integrated leadscrew and anti-backlash nut, smooth, stable layer positioning is guaranteed.

Specifications

Brand:

Elegoo

Our item no:

DAR01550

€48.50

€39.43 Excl. 23% VAT

EU warehouse

Elegoo Saturn 3 Ultra & Jupiter SE end stop

Zoom in

Description The original end stop for both the Elegoo Saturn 3 Ultra and the Jupiter SE. This switch detects the end point of the Z-axis during homing and prevents damage to the build plate or LCD during the "return to zero."

Specifications

Brand:

Elegoo

Our item no:

DAR01551

€3.50

€2.85 Excl. 23% VAT

EU warehouse

Elegoo Saturn 3 Ultra ACF Film (5-pack)

Zoom in

Description These ACF films are original replacement products for the Saturn 3 Ultra 3D printer from Elegoo. The technology with which these ACF films are made prevents them from sticking to the LCD screen. Because the surface is non-sticky and does not contain wrinkles, scratches or bubbles, your 3D prints will easily come off after printing. The film is resistant to chemicals, long-term use and long-term exposure to UV radiation. Your prints are cured quickly and accurately thanks to the 92% UV light transmission. Because the film is 0.3mm thick, it will not break during printing. This means it can last a long time and deliver high quality, even with daily use. These ACF films are 195mm x 290mm, 0.3mm thick and come in a pack of 5.

Please note: You can see on this ACF film that one side is textured and the other side is smooth. The textured side should face the LCD screen.

Specifications

Brand:	Elegoo	Our item no:	DAR01552
Dimensions:	0.3 x 290 x 195 mm

€98.50

€80.08 Excl. 23% VAT

EU warehouse

Elegoo Saturn 3 Ultra Build Plate

Zoom in

Description This build plate is an original replacement part for the Saturn 3 Ultra 3D printer from Elegoo. The printed circuit board is made of an aluminum alloy, which prevents it from deforming, and has a laser-engraved surface, so that the first layer adheres well. In addition, it comes with a levelling system on 4 points, so that it only needs to be levelled once. Finally, this plate is easy to replace.

Specifications

Brand:

Elegoo

Our item no:

DAR01553

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€48.50 (coming soon)

€39.43 Excl. 23% VAT

Elegoo Saturn 3 Ultra end stop cable

Zoom in

Description This original end stop cable is suitable for the Elegoo Saturn 3 Ultra and ensures precise axis positioning. Ideal as a replacement in case of wear or malfunction.

Specifications

Brand:

Elegoo

Our item no:

DAR01554

€3.25

€2.64 Excl. 23% VAT

EU warehouse

Elegoo Saturn 3 Ultra Resin Tank

Zoom in

Description This original Elegoo resin tank is used in combination with the Elegoo Saturn 3 Ultra 3D printer. It is made of anodised aluminum and has a durable design for long-term use. In addition, you can use it as a spare resin tank when you want to quickly change the resin colour, for example.

This item is compatible with the following printers

Elegoo Saturn 3 Ultra 12K 3D printer

Specifications

Brand:	Elegoo	Our item no:	DAR01556
Dimensions:	33 x 292.8 x 172.4 mm

€54.50

€44.31 Excl. 23% VAT

EU warehouse

Elegoo Saturn 3 Ultra stepper motor with leadscrew

Zoom in

Description The Elegoo Saturn 3 Ultra Stepper Motor with Leadscrew is the OEM part for the Z-axis of the Saturn 3 Ultra resin printer. This combination of stepper motor and integrated leadscrew ensures precise Z-motion control and low-vibration operation.

Specifications

Brand:

Elegoo

Our item no:

DAR01557

€48.50

€39.43 Excl. 23% VAT

EU warehouse

Elegoo Saturn PFA films (5-pack)

Zoom in

Description These PFA films are original replacement parts for Elegoo Saturn and Saturn S 3D printers, but are also suitable for other 8.9 inch LCD 3D printers. The PFA films are made of pure, raw materials, which makes them twice as good in performance as FEP films. In addition, the lifespan is 50% longer and can withstand up to 9,000 releases. These PFA films are 260mm x 185mm, 0.127mm thick and come in a pack of 5.

Specifications

Brand:	Elegoo	Our item no:	DAR01711
Dimensions:	0.127 x 185 x 260 mm	Quantity:	5

€44.50

€36.18 Excl. 23% VAT

EU warehouse

Elegoo Mini Heater

Zoom in

Description This intelligent mini heater allows you to print stress-free. Thanks to the PTC rapid heating, you can achieve optimum speed and efficiency. The heater has an accurate and intelligent temperature control, so you no longer have problems with 3-prints coming off during printing, deformation and poor adhesion between layers.

Automatic switching
When the temperature is below 25˚, the heater switches on automatically and when the temperature is above 25˚, it switches off. Combined with the 120W, this heater can also handle energy very efficiently without compromising performance. Thanks to the self-regulating property of the PTC element, you can be sure that overheating is prevented, so you can always get started safely.

Other functionalities
The heater is easy to install and shows the temperature in real time. The high speed fan rotates at 10,000 rpm and spreads the heat evenly. This melts the material uniformly and gives you high quality prints. You can easily use the Elegoo mini heater with various 3D printers from Elegoo, such as the Mars 5 Ultra, Mars 5, Mars 4 Max, Mars 4 DLP, Saturn 4, Saturn 4 Ultra, Saturn 3, Saturn 3 Ultra, Saturn 2, Saturn 8K, Saturn S and Jupiter SE. The heater can also be adapted to work with 3D printers from other brands.

Specifications

Brand:	Elegoo	Input voltage:	24V
Manual:	Download	Power rating:	120 W
Dimensions:	132 x 59 x 71 mm	Our item no:	DAR01861

€55.50

€45.12 Excl. 23% VAT

EU warehouse

Elegoo Mercury Plus 3.0 Wash & Curing Machine

Zoom in

Description Go for a perfect curing with the Mercury Plus 3.0 Wash & Cure machine from Elegoo. With this machine you can not only wash your print, but also cure it directly. This saves you time and effort and you also have a perfect 3D print. The buttons make it possible to manually set the washing and curing time between 0 and 30 minutes. You can wash a model of up to 214mm x 135mm x 180mm when using the platform. Without a platform, the model can be up to 230mm x 135mm x 260mm. The maximum size for curing is ⌀ 250mm x 290mm. The Mercury Plus works with 48 W and uses 100-240 V, 50/60 Hz, 24 V and 2 A.

Specifications

Brand:	Elegoo	Input voltage:	100-240V
Manual:	Download	Power rating:	48 W
Dimensions:	412.5 x 302.5 x 302.5 mm	Our item no:	DAR01893

Order now, we can ship this today!

€169.00

€137.40 Excl. 23% VAT

In stock

Elegoo OrangeStorm Giga hotend

Zoom in

Description This Elegoo OrangeStorm Giga hotend includes an extra hotend, a spool holder and a filament detector. The 0.6mm nozzle is made of chrome-zirconium-copper, which gives it a fantastic thermal conductivity. In addition, the nozzle is wear-resistant, resistant to demanding conditions and delivers a consistent quality.

The two powerful cooling fans provide sufficient cooling, which ensures better end results. This hotend is easy to use and install. By combining it with the OrangeStorm Giga Four-hotend Mounting plate assembly, the number of hotends on the OrangeStorm Giga 3D printer can be up to 4.

Specifications

Brand:

Elegoo

Our item no:

DAR02038

Order now, we can ship this today!

€108.50

€88.21 Excl. 23% VAT

In stock

Elegoo OrangeStorm Giga heat Sink assembly

Zoom in

Description This OrangeStorm Giga heat sink assembly is an original replacement part from Elegoo.

Specifications

Brand:

Elegoo

Our item no:

DAR02039

€37.95

€30.85 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga model fan assembly

Zoom in

Description This OrangeStorm Giga model fan assembly is an original replacement part from Elegoo.

Specifications

Brand:

Elegoo

Our item no:

DAR02040

€29.95

€24.35 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga X-axis timing belt assembly

Zoom in

Description This OrangeStorm Giga X-axis timing belt assembly is an original replacement part from Elegoo.

Specifications

Brand:

Elegoo

Our item no:

DAR02041

€10.95

€8.90 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga Y-axis timing belt assembly

Zoom in

Description This OrangeStorm Giga Y-axis timing belt assembly is an original replacement part from Elegoo.

Specifications

Brand:

Elegoo

Our item no:

DAR02042

€10.95

€8.90 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga Gearbox Assembly

Zoom in

Description This OrangeStorm Giga Gearbox Assembly is an original replacement part from Elegoo.

Specifications

Brand:

Elegoo

Our item no:

DAR02043

€19.95

€16.22 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga touch screen

Zoom in

Description This OrangeStorm Giga touch screen is an original replacement part from Elegoo.

Specifications

Brand:

Elegoo

Our item no:

DAR02044

€103.50

€84.15 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga mainboard

Zoom in

Description The Elegoo OrangeStorm Giga motherboard is the central operating system for the OrangeStorm Giga 3D printer, designed for industrial applications and demanding printing projects. This motherboard offers powerful performance and advanced features essential for precise and reliable 3D prints.

Key Features:

Firmware: Pre-installed Klipper firmware, known for its high speed and accuracy in 3D printing.
Connectivity: Supports USB, LAN and Wi-Fi, giving users flexibility in sending print jobs.
Multi-Extruder Support: Expandable to up to four print heads, enabling simultaneous printing with multiple materials or colors.

Specifications

Brand:

Elegoo

Our item no:

DAR02045

€169.50

€137.80 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga Double-hotend mounting plate assembly (including transport case)

Zoom in

Description With this Elegoo Double-hotend Mounting plate assembly, the OrangeStorm Giga 3D printer can be easily expanded. This set makes it possible to upgrade the 3D printer to 2 print heads, when combined with an additional hotend. This increases productivity.

This reliable mounting plate is made of high-quality aluminum alloy and has improved accuracy. The plate can be easily mounted, making this kit suitable for both beginners and advanced users.

Specifications

Brand:

Elegoo

Our item no:

DAR02046

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€43.50 (coming soon)

€35.37 Excl. 23% VAT

Elegoo OrangeStorm Giga Four-hotend mounting plate assembly (including transport case)

Zoom in

Description With this Elegoo Double-hotend Mounting plate assembly, the OrangeStorm Giga 3D printer can be easily expanded. This set makes it possible to upgrade the 3D printer to 4 print heads, when combined with 3 additional hotends. This increases productivity.

This reliable mounting plate is made of high-quality aluminum alloy and has improved accuracy. The plate can be easily mounted, making this kit suitable for both beginners and advanced users.

Specifications

Brand:

Elegoo

Our item no:

DAR02047

€48.50

€39.43 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga printhead kit

Zoom in

Description This OrangeStorm Giga printhead kit contains the following replacement parts:

Hotend with 0.6mm nozzle
Spool holder (for 1kg spools)
Filament detection

Specifications

Brand:

Elegoo

Our item no:

DAR02048

€109.95

€89.39 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga 5kg large spool holder kit

Zoom in

Description This 5kg large spool holder kit for the Elegoo OrangeStorm Giga is specially designed for 3kg and 5kg spools. The spool holder is 252mm x 174mm x 75mm and has a double roller bearing mechanism. This reduces resistance and allows the filament to be guided smoothly into the 3D printer. The simple installation makes it a user-friendly product that makes the printing process more efficient. This makes this spool holder ideal for creating large projects.

Specifications

Brand:

Elegoo

Our item no:

DAR02049

€43.50

€35.37 Excl. 23% VAT

EU warehouse

Elegoo OrangeStorm Giga PEI build plates

Zoom in

Description This set of 4 PEI building plates is an original replacement part for the OrangeStorm Giga 3D printer from Elegoo. The plates are 410mm x 410mm and offer excellent adhesion during 3D printing. When the print is finished, the spring steel plate can be bent slightly and the print can be removed without difficulty. These PEI plates are durable and can be used again and again.

Specifications

Brand:

Elegoo

Our item no:

DAR02050

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!