E3D

145 - 168 of 337

E3D Volcano hardened steel nozzle, 2.85mm x 0.40mm

Description The replacement V6 nozzle for Volcano E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for highly specialised materials, where a standard brass nozzle runs the risk of corroding. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm and is suitable for filament with a diameter of 2.85mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00066
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

E3D Volcano hardened steel nozzle, 2.85mm x 1.20mm

Zoom in

Description This replacement V6 nozzle for the Volcano E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 1.2mm and is suitable for filament with a diameter of 2.85mm

Specifications

Brand:	E3D	Nozzle diameter:	1.2 mm
Filament diameter:	2.85 mm	Our item no:	DED00068
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€26.00

€21.14 Excl. 23% VAT

EU warehouse

E3D thermistor cartridge

Zoom in

Description The E3D Thermistor Cartridge is an easy to attach thermistor cartridge for the E3D V6 heaterblocks. The cartridge contains the Semitec 104GT thermistor. The cartridge housing is made of copper and the thermistor is secured with a high quality thermally conductive ceramic adhesive.

The cartridge comes with a cable with connector.

For the Marlin firmware you need the following setting:
#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Max temp:	280 °C
Cable length:	100 cm	Our item no:	DED00069
Diameter:	3 mm

€11.00

€8.94 Excl. 23% VAT

EU warehouse

E3D Bowden adapter, 1.75mm

Zoom in

Description Easily make a Bowden connection to your extruder with this Bowden groovemount adapter. Suitable for 1.75mm filament. The coupling is suitable for PTFE pipe with an outer diameter of 4mm.

Specifications

Brand:	E3D	Our item no:	DED00070
Filament diameter:	1.75 mm

Order now, we can ship this on Monday!

€9.00

€7.32 Excl. 23% VAT

In stock

E3D Bowden adapter, 3mm

Zoom in

Description Easily make a Bowden connection to your extruder with this Bowden groovemount adapter. Suitable for 2.85mm filament. The coupling is suitable for PTFE tube with an outer diameter of 6mm.

Specifications

Brand:	E3D	Our item no:	DED00071
Filament diameter:	2.85 mm

Order now, we can ship this on Monday!

€9.00

€7.32 Excl. 23% VAT

In stock

E3D V6 silicone sock pro for hot ends (3-pack)

Zoom in

Description With these silicone socks you can ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, more favorable for overhangs, bridges and more accurate temperature behavior.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Brand:	E3D	Our item no:	DED00072
Colour:	blue

Order now, we can ship this on Monday!

€6.00

€4.88 Excl. 23% VAT

In stock

E3D fibreglass sleeve, 9cm

Zoom in

Description This piece of fibreglass insulation sleeving is suitable for thin wire. The outer diameter of the sleeving is 1mm and the inner diameter is 0.25mm.

Specifications

Brand:	E3D	Outer diameter:	1 mm
Inner diameter:	0.2 mm	Our item no:	DED00073
Length:	9 cm

€2.75

€2.24 Excl. 23% VAT

EU warehouse

E3D v6 hot end complete kit | 1.75mm 12V thermistor cartridge

Zoom in

Description This complete v6 hotend kit for your RepRap 3D printer contains all parts for the v6 hotend (1.75mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached.

The kit contains the following original parts:

E3D thermistor cartridge 100k Ohm Semitec
E3D aluminium heater block
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D aluminium heatsink
E3D silicone sock for v6 hotends ( 3 pieces!)
Fasteners

The kit contains the following compatible parts:

Axial fan 30 x 30 x 10mm 12V
Ceramic Heating Cartridge 12V 40W
PTFE tube, 10cm

For the Marlin firmware you need the following thermistor setting:
#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00076
Max temp:	300 °C

Interested in ordering this?

Click HERE to send us a mail and we'll alert you when it becomes available!

€62.50 (coming soon)

€50.81 Excl. 23% VAT

E3D v6 brass nozzle, 1.75 x 0.50mm

Zoom in

Description This nozzle is suitable for an E3D hotend and with a medium opening of 0.50mm ensures smooth and precise printing of layers. This nozzle (marking # 6) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DED00084
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€6.75

€5.49 Excl. 23% VAT

In stock

E3D Thermal Paste, 1 gram

Zoom in

Description Thermal paste improves the thermal transition from the warm to the cold part of the heatbreak. By using thermal paste, the risk of clogging (the softening of the filament in the heatbreak too early) is considerably reduced.

The composition of the paste is as follows: 50% silicone, 20% carbon, 30% metal oxide.

Specifications

Amount:	0.001 kg	Our item no:	DED00085
Brand:	E3D	Weight:	0.003 kg
Safety datasheet:	Safety Information

Order now, we can ship this on Monday!

€2.75

€2.24 Excl. 23% VAT

In stock

E3D v6 heaterblock and mounting materials (old version)

Zoom in

Description This v6 heater block is designed in such a way that it exhibits very good thermal behaviour. Both the heater cartridge and a thermistor can be fixed well and easily on the heater block.

The heater block is also compatible with the MK8 parts due to the internal M6 screw thread. The mounting parts are included.

Please note: this is the old version and cannot be used with the E3D thermistor cartridge.

Specifications

Brand:	E3D	Our item no:	DED00088
Dimensions:	11.5 x 20 x 16 mm	Screwthread type:	M6

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D v6 copper nozzle, 1.75mm x 0.25mm

Zoom in

Description This copper nozzle is suitable for an E3D hot end and ensures very precise results with a small opening of 0.25mm. The nozzle is made of a special copper alloy and only becomes softer above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #0) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.25 mm
Filament diameter:	1.75 mm	Our item no:	DED00090
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D V6 copper nozzle, 1.75mm x 0.35mm

Zoom in

Description This copper nozzle is suitable for an E3D hot end and ensures very precise results with a fairly small opening of 0.35mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #2) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.35 mm
Filament diameter:	1.75 mm	Our item no:	DED00092
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D V6 copper nozzle, 1.75mm x 0.40mm

Zoom in

Description This copper nozzle is suitable for an E3D hot end and ensures very precise results with a medium opening of 0.40mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #3) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00093
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D V6 copper nozzle, 1.75mm x 0.50mm

Zoom in

Description This copper nozzle is suitable for an E3D hot end and provides very precise results with a medium opening of 0.50mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking # 6) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DED00094
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D V6 copper nozzle, 1.75mm x 0.60mm

Zoom in

Description This copper nozzle is suitable for an E3D hot end and provides very precise results with a fairly large opening of 0.60mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #4) has a perfect flow of 1.75mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DED00095
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

Nozzle diameter:

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D V6 copper nozzle, 2.85mm x 0.25mm

Zoom in

Description This copper nozzle is suitable for an E3D hot end and ensures very precise results with a small opening of 0.25mm. The nozzle is made of a special copper alloy and only softens above 500 °C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #0) has a perfect flow of 3mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.25 mm
Filament diameter:	2.85 mm	Our item no:	DED00097
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D V6 copper nozzle, 2.85mm x 0.30mm

Zoom in

Description This copper nozzle is suitable for an E3D hot end and provides very precise results with a fairly small opening of 0.3mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #1) has a perfect flow of 3mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.3 mm
Filament diameter:	2.85 mm	Our item no:	DED00098
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

€15.00

€12.20 Excl. 23% VAT

EU warehouse

E3D v6 copper nozzle, 2.85mm x 0.40mm

Zoom in

Description This copper nozzle is suitable for an E3D hotend and ensures very precise results with a medium opening of 0.4mm. The nozzle is made of a special copper alloy and only softens above 500°C. Copper conducts 3x more heat than brass and will therefore heat up faster and keep the temperature more stable.

This is the ultimate nozzle for materials that are printed at high temperatures. Of course, this nozzle also works perfectly with standard filaments such as PLA, ABS and PETG.

This nozzle (marking #3) has a perfect flow of 3mm filament and ensures that layers are neatly flattened.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00099
Material:	Copper	Screwthread type:	M6
Nozzle coating:	nickel plated

€14.50

€11.79 Excl. 23% VAT

EU warehouse

E3D V6 hardened steel nozzle, 1.75mm x 0.35mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.35mm (marking #2) and is suitable for filament with a diameter of 1.75mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.35 mm
Filament diameter:	1.75 mm	Our item no:	DED00103
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D V6 hardened steel nozzle, 1.75mm x 0.40mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 1.75mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00104
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D V6 hardened steel nozzle, 1.75mm x 0.50mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.5mm (marking #6) and is suitable for filament with a diameter of 1.75mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.5 mm
Filament diameter:	1.75 mm	Our item no:	DED00105
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D V6 hardened steel nozzle, 2.85mm x 0.30mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass version, but has a longer delivery time

This nozzle has an opening of 0.30mm (marking #1) and is suitable for filament with a diameter of 3mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.3 mm
Filament diameter:	2.85 mm	Our item no:	DED00106
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D Titan Aero extruder 1.75mm, 12V

Zoom in

Description With the Titan Aero you have access to the ultimate extruder system for your 3D printer. It is the perfect combination of a V6 hotend and a Titan coldend. Both developed for a unique performance.

The Aero is a lightweight and compact extruder system that takes up 25mm less space than a separate V6 and Titan combination. Because everything is more compact, the extruder can also handle flexible filaments better.

Due to the 3:1 transmission, a lighter NEMA17 stepper motor can be used. This makes the Aero powerful, precise and very fast.

The Titan Aero 12V extruder kit contains the following parts: