E3D

121 - 144 of 337

Description This kit contains only the metal hot end parts and is intended for users with some experience and/or in possession of their own parts. Electronics components are not included. The kit is ideal for upgrading your 3D printer to an E3D V6 hot end.

The kit contains the following parts:

E3D V6 aluminium heatsink 3.00mm;
E3D V6 aluminium heater block;
E3D V6 heat break 3mm;
E3D V6 brass nozzle 3mm x 0.4mm;
E3D V6 spare fasteners.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	3 mm	Our item no:	DED00026

€47.50

€38.62 Excl. 23% VAT

EU warehouse

E3D V6 stainless steel nozzle, 2.85mm x 0.25mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of stainless steel (AISI 303). Stainless steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle runs the risk of corrosion. The stainless steel nozzle provides the same performance as the brass version, but gives a slightly lower print speed.

This nozzle has an opening of 0.25mm (marking #0) and is suitable for filament with a diameter of 3mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.25 mm
Filament diameter:	2.85 mm	Our item no:	DED00030
Material:	Stainless steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

0.25 mm

0.4 mm

0.8 mm

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D V6 stainless steel nozzle, 2.85mm x 0.40mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of stainless steel (AISI 303). Stainless steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle runs the risk of corrosion. The stainless steel nozzle provides the same performance as the brass version, but gives a slightly lower print speed.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 3mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00031
Material:	Stainless steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

0.25 mm

0.4 mm

0.8 mm

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D V6 stainless steel nozzle, 2.85mm x 0.80mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of stainless steel (AISI 303). Stainless steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle runs the risk of corrosion. The stainless steel nozzle provides the same performance as the brass version, but gives a slightly lower print speed.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 3mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DED00032
Material:	Stainless steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

0.25 mm

0.4 mm

0.8 mm

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D Volcano brass nozzle, 1.75mm x 0.60mm

Zoom in

Description This brass E3D Volcano nozzle has an opening of 0.6mm and is ideal for printing tall layers with 1.75mm filament. The high-quality nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.6 mm
Filament diameter:	1.75 mm	Our item no:	DED00033
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€8.25

€6.71 Excl. 23% VAT

In stock

E3D brass Volcano nozzle, 1.75mm x 0.8mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.8mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DED00034
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25

€6.71 Excl. 23% VAT

EU warehouse

E3D brass Volcano nozzle, 1.75mm x 1mm

Zoom in

Description This E3D volcano nozzle has an opening of 1mm and is ideal for printing tall layers with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	1.75 mm	Our item no:	DED00035
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25

€6.71 Excl. 23% VAT

EU warehouse

E3D brass Volcano nozzle, 1.75mm x 1.2mm

Zoom in

Description This E3D volcano nozzle has an opening of 1.2mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1.2 mm
Filament diameter:	1.75 mm	Our item no:	DED00036
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25

€6.71 Excl. 23% VAT

EU warehouse

E3D brass Volcano nozzle, 2.85mm x 0.8mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.8mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	2.85 mm	Our item no:	DED00038
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25

€6.71 Excl. 23% VAT

EU warehouse

E3D brass Volcano nozzle, 2.85mm x 1mm

Zoom in

Description This E3D volcano nozzle has a 1mm opening, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1 mm
Filament diameter:	2.85 mm	Our item no:	DED00039
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€8.25

€6.71 Excl. 23% VAT

In stock

E3D brass Volcano nozzle, 2.85mm x 1.2mm

Zoom in

Description This E3D volcano nozzle has an opening of 1.2mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	1.2 mm
Filament diameter:	2.85 mm	Our item no:	DED00040
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

Order now, we can ship this on Monday!

€8.25

€6.71 Excl. 23% VAT

In stock

E3D V6 Lite6 direct hot end kit, 1.75mm

Zoom in

Description The E3D lite hot end is the ideal hot end for standard 3D printing applications with PLA and ABS filament. The Lite6 is the little brother of the V6 and suitable for standard materials. Unlike the V6, Lite6's PTFE tube runs all the way through, so that it can easily be replaced in the event of a defect or jam.

Below are the main specs of the Lite6:

print speed of 20-50mm/s;
easy to use;
suitable for filament with a diameter of 1.75mm;
compatible with V6 nozzles, Volcano and Bowden systems;
maximum temperature 245°C (PLA & ABS).

The kit consists of the following original parts:

E3D heatsink with Bowden coupling (original)
E3D aluminium heater block (original)
E3D brass nozzle (0.4mm) (original)
E3D thermistor cartridge 100k Ohm Semitec (original)
E3D injection molded fan duct (colour: red)
E3D fasteners (original)
E3D silicone sock for V6 hot ends (original)
Ceramic heating element 12V/30W (original)
Axial fan 30 x 30 x 10mm 12V
PTFE tube, 10cm

For the Marlin firmware you need the following thermistor setting: #TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Max operating temp:	245 °C
Filament diameter:	1.75 mm	Our item no:	DED00045

€57.00

€46.34 Excl. 23% VAT

EU warehouse

E3D embedded bowden clutch

Zoom in

Description This coupling makes it possible to make a Bowden coupling in a simple and effective way. The coupling is compatible with E3D v6 1.75mm hot ends and accepts PTFE tubing with an outer diameter of 4mm. The Bowden coupling can also be mounted in, for example, aluminium or printed objects. A hole with a diameter of 8mm and 6mm deep is suitable for mounting the brass coupling.

Specifications

Brand:	E3D	Inner diameter:	4 mm
Depth:	6 mm	Material:	Brass
Diameter:	8 mm	Our item no:	DED00046

Order now, we can ship this on Monday!

€3.15

€2.56 Excl. 23% VAT

In stock

E3D brass Volcano nozzle, 1.75mm x 0.4mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.4mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	1.75 mm	Our item no:	DED00047
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

Order now, we can ship this on Monday!

€8.25

€6.71 Excl. 23% VAT

In stock

E3D brass Volcano nozzle, 2.8mm x 0.4mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.4mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00048
Material:	Brass	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€8.25

€6.71 Excl. 23% VAT

EU warehouse

E3D V6 Bowden coupling

Zoom in

Description This high-quality pneumatic push fit coupling can be mounted directly on an E3D bowden heatsink. The coupling can also be used for other components where a PTFE (Teflon) tube is desired. The coupling has a 1/8" thread and is fully drilled out, allowing a PTFE (Teflon) tube to run through in its entirety.

Suitable for PTFE (Teflon) pipe with an outer diameter of 4mm.

Specifications

Brand:	E3D	Screw thread length:	8 mm
Our item no:	DED00050	Thread size:	-

Order now, we can ship this on Monday!

€3.00

€2.44 Excl. 23% VAT

In stock

E3D nozzle wrench, 7mm

Zoom in

Description Use this wrench to carefully attach your E3D nozzle.

Specifications

Brand:	E3D	Our item no:	DED00053
Material:	Steel

Order now, we can ship this on Monday!

€2.75

€2.24 Excl. 23% VAT

In stock

E3D semitec thermistor incl. sleeving 100k Ohm

Zoom in

Description This 100k thermistor is supplied with fiberglass insulation.

For the Marlin firmware you need the following setting:

#TEMP_SENSOR_N 5

Specifications

Brand:	E3D	Our item no:	DED00054
Max temp:	300 °C

Interested in ordering this product?

Click HERE to send us a mail and we'll alert you when it becomes available!

€6.95 (coming soon)

€5.65 Excl. 23% VAT

E3D embedded bowden coupling, 3mm

Zoom in

Description This coupling makes it possible to create a Bowden coupling in a simple and effective way. The coupling is compatible with E3D v6 3mm Bowden hotends and accepts 6mm OD PTFE tubing. The Bowden coupling can also be mounted on aluminium or printed objects. The brass coupling can be mounted in a hole with a diameter of 13mm and a depth of 5mm.

Specifications

Brand:	E3D	Outer diameter:	13 mm
Depth:	5 mm	Our item no:	DED00056
Inner diameter:	6 mm

Order now, we can ship this on Monday!

€3.75

€3.05 Excl. 23% VAT

In stock

E3D v6 nozzle hardened steel, 1.75mm x 0.25 mm

Zoom in

Description The replacement v6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialized materials, where a standard (brass) nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.25 mm (marking 0) and is suitable for filament with a diameter of 1.75 mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.25 mm
Filament diameter:	1.75 mm	Our item no:	DED00057
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D V6 hardened steel nozzle, 1.75mm x 0.80mm

Zoom in

Description This replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialized materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 1.75mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.8 mm
Filament diameter:	1.75 mm	Our item no:	DED00058
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D V6 hardened steel nozzle, 2.85mm x 0.25mm

Zoom in

Description The replacement v6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.25mm (marking #0) and is suitable for filament with a diameter of 3mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.25 mm
Filament diameter:	2.85 mm	Our item no:	DED00059
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D V6 hardened steel nozzle, 2.85mm x 0.40mm

Zoom in

Description The replacement V6 nozzle for E3D hot ends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 3mm.

Specifications

Brand:	E3D	Nozzle diameter:	0.4 mm
Filament diameter:	2.85 mm	Our item no:	DED00060
Material:	Steel	Screwthread type:	M6
Nozzle coating:	none

Nozzle diameter:

€22.50

€18.29 Excl. 23% VAT

EU warehouse

E3D Titan direct extruder

Zoom in

Description With this original Titan extruder from E3D you have a very powerful extruder at your disposal. The Titan is suitable for 1.75mm and 2.85mm (3mm) filament. The 3:1 gear ration makes the extruder powerful, precise and yet very fast. The higher gear ration ensures a perfect result. The extruder is suitable for standard NEMA17 stepper motor mounting. The parts are made of strong, lightweight plastic.

The Titan extruder kit contains the following parts: